14mm Short Cylindrical End Mill HSS-Co8 TiCN 4-Flute 36mm Effective Length DIN 844 - TECWERK

Benefit from the combination of robust HSS‑Co8 construction, a hard‑wearing TiCN coating and a compact short design for precise, repeatable milling operations. Order this high‑performance end mill directly via Metav Werkzeuge or request advice from our consultants for process alignment.

TECWERK End Mill DIN 844 Type N — 14 mm, HSS‑Co8, TiCN, Weldon, 4‑flute (short)

The TECWERK 14 mm HSS‑Co8 TiCN end mill for short‑reach peripheral and slot milling in low to medium strength steels and stainless materials

HSS‑Co8 substrate for high toughness
TiCN coating for longer tool life
Short DIN 844 Type N geometry for stability
Weldon shank, 12 mm diameter

Precision, material compatibility and performance for demanding shops

The short DIN 844 Type N cutter combines a hardened HSS‑Co8 substrate with a TiCN surface layer to deliver an efficient compromise between toughness and wear resistance. The 4‑flute geometry and centre‑cut design allow both axial plunge and peripheral milling where space is limited, while the right‑hand cut provides conventional chip evacuation. Rated for uncoated use up to ~800 N/mm² and for coated operation up to 1000 N/mm², the tool is particularly suited to machining steel, stainless steel and cast iron, offering a reliable option for repetitive industrial tasks where dimensional consistency matters.

Stable handling and process benefits from shank and form

A Weldon shank with a 12 mm diameter ensures secure toolholding and positive torque transfer in collet chucks and Weldon‑style holders. The compact overall length and the specified effective length support reduced tool overhang, improving rigidity and lowering the risk of chatter. Reduced vibration extends tool life and improves surface finish, so one benefit for production environments is fewer part reworks. The short cutting length also simplifies reach‑limited operations on fixtures and small components without compromising cutting capacity.

Practical machining guidance and procurement support

With a nominal diameter of 14 mm, cutting length 4 mm and an overall length of 83 mm, the cutter is intended for operations requiring short cuts and accurate contouring. The TiCN coating reduces built‑up edge and increases abrasion resistance, making the tool a strong candidate for higher cutting speeds and longer tool cycles. For process integration, Metav can supply detailed data sheets and recommendations on feeds and speeds; technical queries may be addressed by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for rapid clarification before purchase.

Choose TECWERK quality for robust short‑reach milling — contact Metav Werkzeuge for tailored advice and dependable supply from Emmerich

Technical data

• Article number / SKU: 2000866360NW
• Standard: DIN 844
• Manufacturer: TECWERK
• Material: HSS‑Co8
• Coating: TiCN
• Flutes: 4

Facts

• Diameter: 14 mm
• Shank diameter: 12 mm
• Overall length: 83 mm
• Cutting length: 4 mm
• Effective length: 36 mm
• Free clearance / relief: 11.5 mm
• Cutting direction: right‑hand (clockwise)
• Packaging unit: 1

Special features

• Weldon shank with drive flat
• DIN 844 Type N short design
• Centre‑cut capability for plunging
• Suited for steel, inox and cast iron
• Coated operation allows machining up to ~1000 N/mm²

FAQ

What materials is this end mill best suited for?
The TECWERK end mill (DIN 844 Type N, 14 mm, SKU 2000866360NW) is very well suited for steel, stainless steel and cast iron; it is conditionally suitable for non‑ferrous and special alloys.

How does the TiCN coating affect performance?
The TiCN coating on the TECWERK cutter increases abrasion resistance and reduces built‑up edge, enabling higher cutting speeds and longer tool life compared with the uncoated tool.

What does DIN 844 Type N indicate?
DIN 844 Type N denotes a short, cylindrical end mill geometry with a centre‑cut capability, designed for stable short‑reach milling and plunge operations.

Is the Weldon shank compatible with standard toolholders?
The Weldon shank with 12 mm diameter is compatible with Weldon‑style holders and many collet chucks; the drive flat ensures secure torque transmission for heavy cuts.

Can this tool be used for plunge milling?
Yes, the centre‑cut design allows axial plunging as well as peripheral milling, making it suitable for slotting and pocketing in short‑reach operations.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund