150mm Solid Carbide End Mill Set TiAlN Coated 5pc Extra Short 4-Flute For Steel Up To 45 HRC - TECWERK

Benefit from the combination of solid carbide construction, TiAlN coating and proven HPC geometry for reliable, low‑vibration milling and extended tool life; order the set directly via Metav Werkzeuge or consult the sales team for application advice.

TECWERK Solid Carbide End Mill Set WN – TiAlN-coated, extra-short four-flute

The TECWERK Solid Carbide End Mill Set WN is an extra-short, four-flute end mill collection designed for low‑vibration roughing, finishing and slotting across a broad range of ferrous and non‑ferrous materials.

• Solid carbide, TiAlN coating
• Extra-short, four-flute design
• Centre-cutting for plunge operations
• Unequal helix for low-vibration machining
• Cylindrical shank to DIN 6535 HB

Stable cutting for higher productivity

The set is built from solid carbide and finished with a TiAlN coating to deliver enhanced heat resistance and wear protection under elevated cutting temperatures. Combined with the proven HPC geometry, the cutters enable higher feed rates while maintaining surface quality. The unequal helix reduces harmonic excitation and chatter, giving a measurable improvement in process stability and repeatable results on demanding components.

One tool for roughing, finishing and slotting

A four-flute layout paired with centre-cutting capability allows both axial plunging and conventional milling strategies. The geometry and coating make the tools suitable for steel up to 45 HRC, stainless steel, grey cast iron, copper and other non‑ferrous materials such as brass and aluminium, providing versatile performance for mixed‑material production runs. Expect consistent surface finish and efficient chip evacuation when applying appropriate feeds and speeds.

Secure clamping and practical handling

Each cutter features a cylindrical shank manufactured to DIN 6535 HB for reliable seating in standard toolholders and chucks. The extra‑short, compact design increases rigidity and reduces overhang, which supports higher metal removal rates with less deflection. Tools are supplied in a sturdy plastic box for organised storage and quick selection at the machine.

Workshop efficiency and economical operation

The combination of robust substrate, high-performance coating and optimised geometry results in longer tool life and fewer tool changes, supporting a lower total cost of machining per part. The universal capability across common workshop materials reduces tool inventory complexity, while the set’s short design favours high‑stability setups and repeatable production cycles in small to medium manufacturing environments. The product is suitable for both one‑off prototyping and series production.

Contact Metav Werkzeuge to discuss the TECWERK set and confirm the best sizes and machining parameters for the intended application; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930

Technical data

• Article number: 2000866418NW
• Label: Schaftfräserset WN D.4/6/8/10/12mm Z.4 VHM TiAlN 5tlg.Ku.-Box TECWERK
• Manufacturer: TECWERK
• Packaging unit: 1

Facts

• Diameters: 4 mm, 6 mm, 8 mm, 10 mm, 12 mm
• Flutes: 4
• Hardness capability: up to 45 HRC
• Content: 5-piece

Special features

• Solid carbide (fine grain)
• TiAlN coating
• HPC geometry, type N/HPC
• Extra-short, stable design
• Centre-cutting (axial plunge)
• Unequal helix (ungleichteilung)
• Right-hand cutting
• Soft cutting action (10°)
• 45° protective chamfer
• Cylindrical shank to DIN 6535 HB
• Suitable for: steel, stainless steel (INOX), grey cast iron, copper, brass, aluminium
• Packaging: plastic box

FAQ

What materials are suitable for these end mills?
The TECWERK solid carbide end mill set is suitable for machining steel up to 45 HRC, grey cast iron and non‑ferrous metals such as copper and brass; stainless steel is conditionally suitable depending on process parameters.

Is the set suitable for plunge milling?
Yes, the centre‑cutting geometry allows axial plunging and makes the cutters suitable for slotting and plunge operations in appropriate setups.

How does the TiAlN coating benefit machining?
The TiAlN coating increases thermal resistance and surface hardness, which prolongs tool life under high temperatures and supports higher cutting speeds.

Does the shank follow an industry standard for toolholders?
The cylindrical shank conforms to DIN 6535 HB, ensuring compatibility with standard collets and holders for secure clamping.

Are these cutters intended for high-performance roughing?
The combination of HPC geometry and unequal helix is designed to support vibration‑reduced high‑performance cutting, making the set well suited to both roughing and finishing tasks.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund