16mm Solid Carbide End Mill TiAlN Coated 4-Flute 32mm Cut Length, DIN 6527 - TECWERK

Combining VHM solid carbide construction, a TiAlN wear-resistant coating and a geometry optimised for high-performance cutting, this end mill delivers efficient roughing and precise finishing across a wide range of materials. Order directly via Metav Werkzeuge or request cutting-data advice from our consultants for process-safe integration.

End mill DIN 6527K Typ N / HPC, Ø 16 mm, VHM, TiAlN – TECWERK

The End mill DIN 6527K Typ N / HPC is a short, four-flute solid carbide cutter engineered for high-performance milling in steel, cast components and non-ferrous alloys.

• Solid carbide, fine-grain microstructure
• TiAlN coating for extended tool life
• Four flutes with centre cutting geometry
• Short design for vibration-reduced cutting

Maximise material removal with consistent productivity

The combination of VHM (solid carbide) substrate and TiAlN coating enables sustained cutting at elevated speeds under HPC conditions. The four-flute layout and variable pitch reduce chatter and increase metal removal rate, so cycle times fall while tool life improves. Centre cutting capability allows plunge operations and simplifies setup, making the cutter suitable for both roughing and semi-finishing steps in challenging production environments.

Achieve stable finishes with reduced vibrations

A short overall design and targeted neck relief produce a low-vibration cutting behaviour, which translates into repeatable surface quality and less machine strain. The 45° protective chamfer and centre cutting geometry protect edges during entry, while the cylindrical shank to DIN 6535 HB ensures concentric clamping and reliable runout performance. These mechanical details support consistent part quality on small to medium batch runs.

Broad compatibility and easier tool selection

Compliant with DIN 6527, this tool is optimised for machining steel, stainless steel, cast irons and a range of non-ferrous and special alloys, including aluminium alloys with silicon content. The right-hand cutting direction and four effective flutes suit both slotting and side milling operations. The design reduces the need for multiple specialised cutters, simplifying tool inventory while maintaining performance across common workshop tasks.

For tailored cutting data and fast supply from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss application parameters and delivery from Emmerich

Technical data

• Article number: 2000866488NW
• Standard: DIN 6527
• Type: End mill DIN 6527K Typ N / HPC
• Manufacturer: TECWERK

Numbers / Data

• Diameter: 16 mm
• Overall length: 82 mm
• Effective length: 32 mm
• Cutting length: 4 mm
• Neck relief: 15.5 mm
• Flutes: 4
• Shank diameter: 16 mm

Special features

• Material: VHM (solid carbide), fine-grain
• Coating: TiAlN
• Cutting direction: right-hand
• Geometry: variable pitch, centre cutting, four-flute
• Shank standard: DIN 6535 HB, tolerance h6
• Protection chamfer: 0.2 mm
• Application: HPC, suitable for steel, cast iron, stainless steel, non-ferrous metals, special alloys, aluminium with silicon, abrasive materials
• Use: roughing and finishing, low-vibration machining

FAQ

Which materials is this cutter suitable for?
The TECWERK end mill is specified for a broad range of materials: steel, cast iron, stainless steel, non-ferrous metals and aluminium alloys with silicon, as well as many special alloys and abrasive materials.

Can the tool be used for both roughing and finishing operations?
Yes, the geometry and TiAlN coating make the cutter suitable for efficient roughing and for producing consistent finishes during subsequent passes.

Is the cutter capable of plunge milling?
The centre cutting geometry permits plunging operations, so the tool can be employed for pocketing and plunge entry where required.

What benefits does the TiAlN coating provide?
TiAlN improves thermal stability and wear resistance under high temperatures, extending tool life and enabling higher cutting speeds in many alloys.

What shank standard and clamping accuracy can be expected?
The tool uses a cylindrical shank to DIN 6535 HB with shank tolerance h6, supporting accurate clamping and reduced runout when mounted correctly.

Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund