10mm Cutter DIN 844 HR Type HSS-Co5 TiCN Coating, 30mm Effective Length, Right-Hand - TECWERK

Take advantage of the combination of TiCN wear protection, a HSS‑Co5 substrate and a secure Weldon shank for reliable milling of tougher steels; order the tool directly via Metav Werkzeuge or request technical advice from the consultants in Emmerich.

TECWERK Cylindrical Shank End Mill (DIN 844 Type HR) Ø10 mm, TiCN-coated HSS‑Co5, Weldon

A robust TECWERK end mill designed for short, high-performance milling tasks in workshop and production environments, featuring a Ø10 mm cutting diameter and a 30 mm effective length for deep but controlled engagement.

• TiCN coating for extended tool life
• HSS‑Co5 substrate for high toughness
• Four-flute, centre-cutting geometry
• Weldon shank with drive flat

Consistent cutting performance for demanding steels

The short, four‑flute cutter is built on a HSS‑Co5 substrate and finished with a TiCN coating to combine toughness with improved wear resistance. With a nominal diameter of Ø10 mm, an effective length of 30 mm and an overall length of 72 mm, the tool sustains dimensionally stable cutting under moderate to heavy loads. Its DIN 844 designation signals a standardised geometry, while the right‑hand cutting orientation and centre‑cutting capability permit plunge milling and conventional milling operations without modification. The result is dependable cycle times and predictable tool life when used within the stated material limits.

Geometry engineered to improve chip control and surface quality

The cutter’s four‑flute design and finely ground profile yield a balance between chip evacuation and surface finish: multiple cutting edges increase feed capacity while the refined flute geometry prevents chip packing in shoulder and pocket operations. The short construction and the specified relief‑ground profile support stable cutting at higher feeds, delivering improved surface integrity on finished components. The incorporated 45° protective chamfer at the cutting edge reduces burr formation and extends edge life, which translates into fewer tool changes and more consistent part quality.

Secure clamping and machine compatibility for repeatable results

A cylindrical shank with Weldon drive flat ensures positive torque transmission and quick, repeatable tool changes in standard toolholders. The weldon flat is particularly suitable for setups where axial forces and torque must be absorbed without slippage. Combined with the cutter’s compact dimensions and balanced geometry, this results in stable machining with reduced vibration and excellent concentricity. Users benefit from easier setup and repeatable positional accuracy on series work or when swapping tools between machines.

Broad application range with clear material guidance

The tool is specified for machining materials up to approximately 800 N/mm² with an uncoated cutter and up to 1,200 N/mm² when the TiCN coating is employed, making it well suited to a wide range of steels and cast components. According to the tool’s application profile, steel and cast iron are very well suited, while non‑ferrous metals, stainless steels and special alloys are conditionally suitable depending on cutting data and coolant strategy. The combination of a tough HSS‑Co5 core and the hard TiCN layer offers a pragmatic compromise between fracture resistance and wear performance for mixed production environments.

For procurement or detailed process support for the TECWERK TiCN‑coated HSS‑Co5 end mill, contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) to discuss suitability for the intended application and to arrange supply.

Technical data

• Article number: 2000866510NW
• Standard: DIN 844
• Manufacturer: TECWERK
• Product type: Cylindrical shank end mill

Specifications

• Diameter: 10 mm
• Overall length: 72 mm
• Effective length: 30 mm
• Shank diameter: 10 mm
• Cutting edges: 4
• Relief grind length: 9.5 mm
• Cutting direction: Right‑hand

Features & applications

• Material: HSS‑Co5
• Coating: TiCN
• Weldon shank / drive flat
• Four‑flute, centre‑cutting geometry
• Short Type HR with 45° protective chamfer
• Suitable for steel: very well
• Suitable for cast iron: very well
• Suitable for non‑ferrous metals: conditionally suitable
• Suitable for stainless steel and special alloys: conditionally suitable
• Recommended for machining up to ~800 N/mm² (uncoated) and ~1,200 N/mm² (coated)

FAQ

What materials is this end mill best suited for?
The Tecwerk TiCN‑coated HSS‑Co5 end mill is specified as very well suited for steel and cast iron, with conditional suitability for non‑ferrous metals, stainless steels and special alloys depending on cutting parameters and coolant.

Does the cutter allow plunge milling?
Yes. The centre‑cutting geometry and four‑flute design permit plunge operations; the tooth form and centre cut enable direct entry into the material.

How does the TiCN coating affect performance?
The TiCN layer increases surface hardness and reduces adhesive wear, extending tool life and allowing machining of higher‑strength steels (up to around 1,200 N/mm² under recommended conditions).

Is the shank compatible with common toolholders?
The cylindrical shank with Weldon drive flat is compatible with standard Weldon clamping systems and provides secure torque transmission for repeatable setups.

What standard does the tool comply with and how many flutes does it have?
The cutter conforms to DIN 844 and features four flutes, a configuration that balances material removal rate and surface finish.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund