6mm Solid Carbide End Mill Extra Long 25mm Cutting Length TiAlN Coating, DIN 6527 - TECWERK

Take advantage of a combination of solid carbide construction, TiAlN heat-resistant coating and an extended effective cutting length for consistent roughing and finishing results; order directly via Metav Werkzeuge or consult our specialists for parameter optimisation.

TECWERK End Mill Ø6 mm — Solid Carbide, TiAlN‑coated, Extra Long

The TECWERK End Mill Ø6 mm is a cylindrical shank, centre‑cutting tool designed for universal metalworking tasks, offering extended reach and vibration‑reduced geometry for both roughing and finishing applications.

• Solid carbide fine‑grain body
• TiAlN coating for thermal protection
• Extended effective cutting length (25 mm)
• Unequal pitch for vibration reduction

High-performance cutting for efficient production

Manufactured from solid carbide, this end mill combines hardness and toughness to deliver reproducible cutting performance under demanding conditions. The TiAlN coating increases surface hardness and thermal resistance, which reduces flank wear during elevated speeds and helps to maintain dimensional integrity over longer tool life. With a compact Ø 6 mm profile and a 25 mm effective cutting length, the tool is dimensioned for applications where reach and rigidity must be balanced to keep cycle times short and rework minimal.

Geometry engineered to control chatter and chips

A four‑flute design with an unequal pitch delivers stable cutting by breaking up harmonic excitation; this results in quieter machining and fewer tool‑related instabilities. The inclusion of a 45° chamfer at the cutting edge and a precision machined neck relief (free‑cutting clearance approx. 5.8 mm) supports smooth chip evacuation and reduces the risk of tool deflection. The centre‑cutting geometry permits moderate plunging operations, while the right‑hand cutting orientation aligns with standard milling setups for predictable chip flow.

Broad material compatibility for shop flexibility

The tool is specified for universal use across a wide range of workpiece materials: steel, cast iron, stainless steels (Cr‑Ni), non‑ferrous metals, aluminium alloys containing silicon and various abrasive or special alloys. Because the geometry and coating were developed to be versatile, the cutter suits both roughing passes and finishing passes, keeping tool inventory lean while covering many common machining tasks in jobbing shops and production cells.

Shank, tolerances and workshop integration

A cylindrical shank manufactured to DIN 6535 HB with h6 tolerance ensures secure clamping and concentricity in standard toolholders. The overall length of 62 mm and the tool’s neck relief support deeper pockets and extended reach where required. The component is produced to recognised standards (DIN 6527) and features a protective chamfer (0.12 mm) to reduce edge damage during handling and mounting. These characteristics make the cutter straightforward to integrate into existing tool‑holders and CNC programmes without extra setup complexity.

Contact Metav Werkzeuge in Emmerich for tailored cutting data and to arrange supply — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for individualized recommendations and rapid delivery

Technical data

• Article number: 2000866564NW
• Standard: DIN 6527
• Material: solid carbide (VHM)
• Coating: TiAlN
• Diameter: Ø 6 mm
• Effective cutting length: 25 mm
• Overall length: 62 mm
• Shank diameter: 6 mm
• Number of flutes: 4
• Cutting direction: right‑hand cutting
• Shank type: cylindrical shank per DIN 6535 HB
• Shank tolerance: h6
• Neck relief / free‑cut clearance: 5.8 mm
• Chamfer / protective radius: 0.12 mm
• Centre‑cutting: yes
• Pitch: unequal for vibration reduction
• Intended use: roughing and finishing, vibration‑reduced machining
• Material suitability: steel, cast iron, stainless steels, non‑ferrous metals, aluminium with silicon, abrasive and special alloys

Facts

• SKU / UID: 2000866564NW
• Number of teeth: 4
• Type: multi‑flute, extra long

Special features

• Fine‑grain solid carbide substrate
• Heat‑resistant TiAlN surface treatment
• 45° cutting edge chamfer
• Centre‑cut capable for limited plunging
• Designed for universal application and low vibration

FAQ

What materials can be machined with this end mill?
The TECWERK end mill Ø6 mm is suitable for steel, cast iron, stainless steels (Cr‑Ni), non‑ferrous metals and aluminium alloys with silicon content, as well as a range of abrasive and special alloys.

Can this cutter be used for plunge milling?
Yes, the centre‑cutting geometry of the TECWERK end mill permits limited plunging operations in addition to peripheral milling.

Which shank tolerance and standard does the tool comply with?
The tool features a cylindrical shank to DIN 6535 HB with a h6 tolerance for concentric clamping and reliable toolholder fit.

How does the TiAlN coating improve machining?
The TiAlN coating increases thermal stability and surface hardness, reducing wear at higher cutting temperatures and extending the effective service life of the cutter.

Is the tool suitable for both roughing and finishing?
Yes, the geometry and coating combination are engineered to handle roughing passes while delivering a finish quality suitable for many finishing operations.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund