63mm Face Milling Cutter HSS-Co5 TiCN 8 Teeth Right-Hand DIN 1880 - TECWERK

Take advantage of HSS‑Co5 robustness and the TiCN coating for extended tool life; the 63 mm diameter and 8 flutes deliver stable material removal in mixed steel and short‑chipping non‑ferrous applications. Order the cylindrical face mill directly via Metav Werkzeuge or consult our specialists for application advice.

Cylindrical face mill DIN 1880 Type N — 63 mm, HSS‑Co5, TiCN — TECWERK

A cylindrical face mill (Type N) designed for general workshop and industrial milling of construction, case‑hardened and tempered steels as well as short‑chipping non‑ferrous metals; complies with DIN 1880 and features longitudinal and transverse grooves per DIN 138.

• DIN 1880 Type N specification
• HSS‑Co5 substrate with TiCN coating
• 8 flutes for steady chip control
• 27 mm bore for standard arbors

High material removal with predictable performance

The cutter’s 63 mm diameter combined with 8 flutes provides a balanced cut profile that reduces vibration and delivers consistent axial engagement. The HSS‑Co5 substrate supplies the toughness required when facing intermittent cuts and varying surface hardnesses, while the TiCN coating improves wear resistance and reduces built‑up edge during short‑chip finishes. These properties translate directly into longer tool life and fewer tool changes, maintaining production flow and reducing unplanned downtime.

Coating and substrate: extended service life and reliable finishes

A TiCN coating on a cobalt‑enriched high‑speed steel body blends hardness and fracture resistance. The coating lowers friction and improves thermal stability at the cutting edge, which helps preserve geometry under sustained milling of structural and case‑hardened steels. When a fine surface and dimensional consistency are required, the coated tool sustains cutting performance over longer cycles, reducing the need for frequent regrinds or replacement.

Designed for compatibility and secure mounting

The cutter’s 27 mm bore and adherence to DIN 1880 make it compatible with standard arbors and toolholders used in many milling setups. The Type N geometry with longitudinal and transverse grooves according to DIN 138 facilitates reliable chip evacuation for short‑chipping materials and reduces the likelihood of clogging. This results in safer operation and fewer interruptions to the machining process when switching between steel grades and aluminium alloys.

Application focus and machining advantages

Engineered for the machining of construction, case‑hardened and tempered steels as well as short‑chipping non‑ferrous metals, the cutter offers a practical combination of toughness and surface integrity. The right‑hand cutting orientation and defined 8‑tooth arrangement enable efficient feed rates while maintaining control over chip formation. For production environments demanding repeatable results, the geometry supports consistent dimensional accuracy and a stable surface finish.

Contact Metav Werkzeuge for tailored advice and swift supply from Emmerich — help with application selection and delivery is available via info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• SKU: 2000866632NW
• Norm: DIN 1880
• Brand: TECWERK
• Product type: Cylindrical face mill

Core data

• Diameter: 63 mm
• Number of flutes: 8
• Bore diameter: 27 mm
• Cutting length: 8 mm

Special features

• Material: HSS‑Co5
• Coating: TiCN
• Cutting direction: right‑hand cut
• Type: Type N with longitudinal and transverse groove per DIN 138
• Application: milling of construction, case‑hardened and tempered steels; short‑chipping non‑ferrous metals
• Packaging unit: 1

FAQ

Which materials is this cutter suited for?
The cylindrical face mill (TECWERK, SKU 2000866632NW) is specified for machining construction steels, case‑hardened and tempered steels, and short‑chipping non‑ferrous metals.

What is the bore size and how is the cutter mounted?
The cutter has a 27 mm bore designed for use with standard arbors compatible with DIN 1880 face mills; secure clamping to the arbor ensures concentric running.

How does the TiCN coating benefit performance?
The TiCN coating reduces friction and wear on the cutting edges of the HSS‑Co5 substrate, improving thermal stability and extending tool life under demanding milling conditions.

Is the geometry suitable for chip control?
Yes; the Type N geometry with longitudinal and transverse grooves to DIN 138 and 8 flutes promotes effective chip evacuation for short‑chipping materials.

Does the tool comply with recognised standards?
The cutter conforms to DIN 1880 and incorporates groove features according to DIN 138 for reliable industrial use.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund