63mm Face Milling Cutter HSS-Co5 8 Teeth Right-Handed DIN 1880, 27mm Bore - TECWERK

Benefit from robust HSS‑Co5 construction, DIN‑1880 compliance and an 8‑flute geometry for consistent surface quality and extended tool life; order directly via Metav Werkzeuge or contact our consultants for application advice.

Walzenstirnfräser DIN 1880 Typ NR D.63mm HSS‑Co5 Z.8 — Cylindrical face mill, Ø63 mm, HSS‑Co5 (TECWERK)

The Walzenstirnfräser DIN 1880 Typ NR D.63mm HSS‑Co5 Z.8 is a DIN‑1880 compliant cylindrical face mill designed for reliable finishing and productive roughing of construction and alloy steels as well as short‑chipping non‑ferrous metals in industrial milling applications

• HSS‑Co5 for enhanced wear resistance
• DIN‑1880 standardised geometry for interchangeability
• Relief‑ground cord profile for stable cutting
• Longitudinal and transverse slots per DIN‑138

Longer tool life through high‑alloy steel and standard conformity

The use of HSS‑Co5 (high‑speed steel with added cobalt) provides higher red‑hardness and improved wear resistance compared with conventional high‑speed steels, which directly reduces the frequency of tool changes. Compliance with DIN 1880 guarantees a standardised cutter interface and geometry, simplifying tool selection and spindle setup in production environments. Together, these properties support predictable tool life and steady productivity, which is essential when machining series parts or when consistency across multiple shifts is required.

Predictable chip control and secure cutting geometry

Equipped with 8 cutting edges and a relief‑ground cord profile, the cutter offers controlled chip formation and reduced vibration during engagement. The integrated longitudinal and transverse grooves conforming to DIN 138 channel chips away from the cutting zone, lowering the risk of recutting and improving surface finish. These geometric choices make the tool especially suited to short‑chip materials and applications where a clean swarf flow contributes to dimensional stability and repeatability.

Material suitability and machining performance benefits

The cutter is configured for machining construction steels, case‑hardened and quenched‑and‑tempered steels as well as short‑chipping non‑ferrous metals. Right‑hand cutting orientation provides conventional milling behaviour for typical machine tool setups. In practice, this means improved surface integrity on workpieces and efficient stock removal when combined with appropriate feeds and speeds. The controlled geometry reduces edge chipping and helps maintain tool form under intermittent or continuous cutting conditions.

Workshop integration and operational advantages

With a 63 mm diameter and an 8 mm cutting length, the tool balances stability with accessible cutting depth for both roughing and semi‑finishing passes. The 27 mm bore diameter facilitates mounting on standard arbors and sleeves designed for DIN‑1880 cutters, easing integration into existing tool systems. Packaged as a single unit, the cutter is ready for immediate use; its standardised interface keeps machine downtime low and replacement straightforward, supporting a smooth production flow in mixed‑volume workshops.

For DIN‑1880 conformity and extended service life from HSS‑Co5, contact Metav Werkzeuge for technical guidance and procurement — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 — Metav Werkzeuge can advise on spindle adaptation and optimal cutting data for the TECWERK cylindrical face mill (SKU 2000866644NW)

Technical data

• Article number: 2000866644NW
• Standard: DIN 1880
• Manufacturer: TECWERK
• Product type: Cylindrical face mill

Dimensions & performance

• Diameter: 63 mm
• Cutting length: 8 mm
• Number of cutting edges: 8
• Bore diameter: 27 mm
• Width: 40 mm

Design & special features

• HSS‑Co (high‑speed steel with cobalt)
• Typ NR, DIN‑1880 geometry
• Relief‑ground cord profile (hinterschliffenes Kordelprofil)
• Longitudinal and transverse slots according to DIN 138
• Right‑hand cutting (rechtsschneidend)
• Suitable for construction steels, case‑hardening and quenched‑and‑tempered steels, and short‑chipping non‑ferrous metals
• Packaging unit: 1

FAQ

What materials is this cylindrical face mill suitable for?
The Walzenstirnfräser DIN 1880 Typ NR D.63mm HSS‑Co5 Z.8 from TECWERK is specified for construction steels, case‑hardening and quenched‑and‑tempered steels, and short‑chipping non‑ferrous metals.

How does the DIN‑1880 conformity benefit workshop integration?
DIN‑1880 compliance ensures the TECWERK cutter matches standardised interfaces and geometry, allowing simple adaptation to existing arbors and reducing setup time.

What advantages does HSS‑Co5 offer compared with standard HSS?
HSS‑Co5 increases red‑hardness and wear resistance, which extends tool life and sustains cutting performance at higher temperatures than standard high‑speed steel.

Are the chip slots optimised for continuous production?
The longitudinal and transverse slots per DIN‑138 in this cutter are designed to promote reliable chip evacuation and stable cutting in continuous or intermittent milling operations.

Which mounting bore does the cutter require?
The cutter features a 27 mm bore diameter suitable for arbors and sleeves compatible with DIN‑1880 cylindrical face mills; verify arbor fit prior to installation.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund