40mm Face Milling Cutter HSS-Co5 TiCN 7 Teeth Right-Hand DIN 1880 - TECWERK

Take advantage of the combination of HSS‑Co5 construction, a TiCN coating and a 7‑tooth geometry for durable, high‑feed milling in workshop and production environments; the result is reliable material removal and predictable tool life. Order directly via Metav Werkzeuge or consult the team for application advice.

TECWERK cylindrical face mill (DIN 1880, Type NR) — 40 mm, HSS‑Co5, TiCN

The TECWERK cylindrical face mill (Type NR) is a robust, right‑hand cutting tool engineered for high‑efficiency milling of construction, case‑hardened and quenched steels as well as short‑chipping non‑ferrous metals.

• TiCN coating for extended tool life
• HSS‑Co5 construction for increased toughness
• 7 flutes for steady chip load
• Right‑hand cutting, DIN 1880 compliant

Consistent high performance and measurable uptime

The cutter’s HSS‑Co5 substrate combined with a TiCN surface layer delivers a balance of toughness and wear resistance that extends service intervals. The 7‑tooth geometry reduces per‑tooth load, which stabilises cutting forces and helps maintain surface finish on rougher castings or harder quenched parts. For production planners this translates into longer tool cycles and fewer unscheduled tool changes, improving machine utilisation and lowering unit costs.

Versatile material capability for mixed production runs

Designed with a DIN 1880 Type NR profile and a relieved cord‑style cutting edge, the tool is suited to machining construction steels, case‑hardened and tempered steels, and short‑chipping non‑ferrous metals such as aluminium alloys. The incorporated longitudinal and transverse slots (to DIN 138) aid chip evacuation when cutting aluminium or brass, while the cobalt‑alloyed high‑speed steel substrate resists thermal softening during interrupted cuts. This versatility reduces the need for tool changes across mixed batches.

Improved chip control and surface quality

The combination of the cutter’s flute count and the optimised profile ensures predictable chip control and steady surface generation. The right‑hand cutting orientation and the precise tooth geometry produce regular chip formation, which lowers rework rates and minimises secondary finishing. Where part tolerances demand repeatable finishes, this milling solution offers the stability required for consistent downstream assembly or coating processes.

Practical handling, mounting and workshop integration

With a 40 mm diameter and a 16 mm bore, the tool fits compact machining envelopes while remaining compatible with common arbor systems; the HSS‑Co5 body tolerates modest shock loads better than carbide in some interrupted milling tasks. The cutter’s construction is straightforward to inspect and regrind where appropriate, enabling refurbishment in vocational workshops and small series production. Metav’s Emmerich distribution ensures rapid supply, clear provenance and traceable quality for engineering teams.

For application guidance or to procure this TECWERK cylindrical face mill from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for direct delivery and technical support from Emmerich.

Technical data

• Article number: 2000866648NW

• Product type: cylindrical face mill

• Brand: TECWERK

• Standard: DIN 1880

• Diameter: 40 mm

• Width: 32 mm

• Number of flutes: 7

• Cutting length: 7 mm

• Bore diameter: 16 mm

• Material: HSS‑Co

• Coating: TiCN

• Cutting direction: right‑hand cutting

• Design note: Type NR, relieved cord profile; longitudinal and transverse slot to DIN 138

• Application: machining construction, case‑hardened and tempered steels; short‑chipping non‑ferrous metals

FAQ

What materials is the cutter suitable for?
The TECWERK cylindrical face mill is suitable for construction steels, case‑hardened and tempered steels and short‑chipping non‑ferrous metals as stated in the product specification.

How does the TiCN coating benefit the tool?
The TiCN coating increases wear resistance and reduces built‑up edge, helping the cutter maintain performance over longer cycles compared with uncoated high‑speed steel.

Can the cutter be reground or resharpened?
The HSS‑Co5 substrate permits regrinding of the cutter geometry where permitted by the original profile and workshop capabilities; consult the reconditioning guidelines before proceeding.

Which standard and type does this cutter follow?
This tool conforms to DIN 1880, Type NR, ensuring compatibility with equipment and mounting practices that reference this standard.

Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund