50mm Face Milling Cutter HSS-Co5 TiCN 8 Teeth Right-Hand DIN 1880 22mm Bore - TECWERK

Take advantage of the combination of HSS‑Co5 substrate, TiCN coating and an efficient eight‑edge geometry for reliable throughput in small to medium milling operations; order directly via Metav Werkzeuge or consult our specialists for application advice.

Walzenstirnfräser DIN 1880 Typ HR D.50mm HSS‑Co5 TiCN Z.8 TECWERK – high‑performance face mill with TiCN coating and 50 mm diameter

The Walzenstirnfräser DIN 1880 Typ HR D.50mm HSS‑Co5 TiCN Z.8 TECWERK is a compact, right‑hand cutting face mill designed for milling construction, alloy and tempered steels as well as short‑chip non‑ferrous metals

• HSS‑Co5 substrate for improved toughness
• TiCN coating for extended tool life
• 50 mm diameter for compact setups
• 8 cutting edges, right‑hand cutting

Consistent material performance and reduced tool wear

The cutter’s HSS‑Co5 substrate combines high fracture resistance with good thermal stability, which supports continuous operation under moderate feed rates. The TiCN coating reduces adhesion and improves abrasion resistance, helping to maintain a sharp cutting edge over multiple passes. For production planners this translates into fewer tool changes and more predictable process windows. DIN 1880 compliant geometry ensures compatibility with standard toolholders and helps to maintain repeatable machining results.

Optimised geometry for efficient chip control and finish

With an 8‑edge configuration and a hinterschliffenes chord profile plus longitudinal and transverse grooves according to DIN 138, the tool promotes short, controllable chips when machining short‑chip non‑ferrous metals and a wide range of steels. The right‑hand cutting direction and the flute design reduce vibration and support a consistent surface quality on moulded or hardened workpiece surfaces. The result is a balance between material removal rate and surface finish that benefits repetitive milling tasks.

Practical dimensions and mounting information

The face mill features a 50 mm diameter and a bore diameter of 22 mm, suitable for standard arbor mounting in compact milling heads. The cutting length of 8 mm and a nominal width of 36 mm (data supplied) suit a variety of slotting and face milling operations in small to medium‑sized components. The combination of these dimensions with DIN 1880 geometry allows quick integration into existing setups without complex retooling, supporting short changeover times in batch production.

Application focus: where this cutter performs best

Engineered for machining construction, case‑hardened and tempered steels as well as short‑chip non‑ferrous metals, the tool is aimed at workshops and production lines that require a robust, general‑purpose face mill. The solid HSS‑Co design and TiCN surface treatment make it particularly suitable where intermittent cuts, variable material hardness, or higher toughness demands are present. Process engineers will appreciate the predictable wear progression and straightforward re‑conditioning strategy that this cutter offers.

Contact Metav Werkzeuge for tailored cutting data and order coordination—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific materials and machines

Technical data

• Article number: 2000866670NW
• SKU: 2000866670NW
• Norm: DIN 1880
• Product type: Face mill
• Manufacturer: TECWERK

Facts

• Diameter: 50 mm
• Number of cutting edges: 8
• Bore diameter: 22 mm
• Cutting length: 8 mm
• Width: 36 mm

Special features

• Material: HSS‑Co
• Coating: TiCN
• Right‑hand cutting
• Type HR, hinterschliffenes chord profile
• Longitudinal and transverse grooves according to DIN 138
• Packaging unit: 1

FAQ

What materials is the Walzenstirnfräser DIN 1880 Typ HR D.50mm HSS‑Co5 TiCN Z.8 TECWERK suitable for?
The Walzenstirnfräser DIN 1880 Typ HR D.50mm HSS‑Co5 TiCN Z.8 TECWERK is suitable for milling construction, alloy and tempered steels as well as short‑chip non‑ferrous metals, as specified by its DIN 1880 geometry and material recommendations.

How does the TiCN coating influence tool life?
The TiCN coating on the face mill reduces adhesive wear and improves abrasion resistance, which extends the effective service life of the HSS‑Co5 cutting edges under typical production conditions.

What mounting interface is required for this face mill?
The cutter requires an arbor or holder compatible with a 22 mm bore; the DIN 1880 standard geometry assists in ensuring proper seating and concentricity in standard toolholders.

How many cutting edges does the tool have and what is the benefit?
Equipped with 8 cutting edges, the tool offers efficient material removal and a balanced distribution of wear, which can reduce tooling costs per processed part when compared with lower‑edge configurations.

Is this face mill suitable for intermittent or rough milling?
Yes, the HSS‑Co substrate combined with the TiCN coating and the HR profile make the cutter robust enough for intermittent cuts and moderate roughing operations while still delivering acceptable surface quality.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund