6mm Solid Carbide End Mill TiAlN Coated 35-38° Helix Long Shank DIN 6527L - TECWERK

Benefit from the combination of universal material compatibility, a heat-resistant TiAlN coating and a vibration-reducing geometry that keeps production steady; order the TECWERK solid carbide end mill directly via Metav Werkzeuge or ask our consultants for application support.

Solid Carbide End Mill DIN 6527 L, Ø6 mm — TiAlN, 35–38° helix (TECWERK)

The Solid Carbide End Mill DIN 6527 L, Ø6 mm is a long, multi-flute cutter designed for efficient roughing and finishing across a wide range of engineering materials in industrial milling applications.

• Solid carbide construction, TiAlN coating
• 35–38° helix angle for stable chip evacuation
• Six flutes for high material removal rates
• Long shank with neck relief for low vibration

High productivity with longer tool life

The TECWERK cutter combines solid carbide substrate with a TiAlN surface treatment to increase heat resistance and protect against built-up edge during continuous milling cycles. The 35–38° helix reduces cutting forces and improves chip flow, while the six-cutting-edge configuration enables higher feed rates without sacrificing stability. With a cutting length of 6 mm and an effective length of 20 mm, the geometry supports both rapid material removal and controlled finishing passes, resulting in extended service intervals and fewer tool changes for a more efficient production flow.

One-tool versatility across common and demanding materials

Thanks to the latest geometry and coating, this long end mill is highly suitable for steel, stainless (Cr–Ni) steels, cast and grey cast irons, non-ferrous metals and aluminium alloys with silicon content, as well as abrasive or special alloys encountered in modern workshops. The universal fine-grain carbide substrate paired with TiAlN makes the tool appropriate for both roughing and finishing, enabling consolidated tooling strategies where fewer cutters are needed to cover multiple operations — a clear advantage for mixed-production environments and small series manufacturing.

Stable machining and superior surface quality

Designed with unequal pitch and a neck relief (neck clearance), the cutter minimises chatter and vibration even in long-reach applications, delivering consistent surface finish and dimensional accuracy. The shank meets DIN 6535 HB specifications with a shank tolerance h6, ensuring repeatable clamping precision. A protective 45° chamfer (0.12 mm) at the cutting edge improves edge strength during interrupted cuts. The right-hand cutting direction and long shank geometry together reduce the risk of harmonic excitation, supporting smoother operation and predictable tool life in industrial milling setups.

Choose the TECWERK long solid carbide end mill with TiAlN coating for reliable, vibration‑reduced milling — contact Metav Werkzeuge in Emmerich for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 2000866936NW
• UID: 2000866936NW
• Norm: DIN 6527
• Manufacturer: TECWERK
• Product type: Solid carbide end mill
• Coating: TiAlN
• Material: VHM

Dimensions and data

• Diameter: 6 mm
• Shank diameter: 6 mm
• Overall length: 57 mm
• Cutting length: 6 mm
• Effective length: 20 mm
• Free relief length: 5.8 mm
• Flutes: 6
• Helix angle: 35–38°
• Cutting direction: right-hand
• Packing unit: 1

Design and special features

• DIN 6527 L, Type N, long version
• Multi-flute geometry, unequal pitch
• Neck relief for low-vibration machining
• 45° protective chamfer, 0.12 mm
• Cylindrical shank to DIN 6535 HB, tolerance h6
• Suitable for roughing and finishing
• Universal fine-grain solid carbide substrate
• Especially suited for steel, INOX, castings, NE-metals, aluminium with Si and abrasive materials

FAQ

What materials is this cutter suitable for?
The TECWERK solid carbide end mill (SKU 2000866936NW) is highly suitable for steel, stainless (Cr–Ni) steels, cast iron, grey cast iron, non‑ferrous metals and aluminium alloys with silicon, plus abrasive and special alloys.

Can the tool be used for both roughing and finishing?
Yes. The geometry and TiAlN coating make the cutter appropriate for combined roughing and finishing operations while maintaining edge stability and good surface quality.

What features reduce vibration during long‑reach milling?
Unequal pitch, neck relief and the long shank design reduce harmonic excitation; the tool’s neck relief and newly developed geometry enable quieter, more stable machining with improved surface results.

What are the key dimensions for clamping and reach?
The cutter has a diameter and shank of 6 mm, an overall length of 57 mm, a cutting length of 6 mm and an effective length of 20 mm, with shank tolerance h6 for precise clamping.

Which standard and coating does the tool comply with?
The cutter conforms to DIN 6527 L, features a TiAlN coating and is manufactured from VHM (solid carbide) to ensure thermal resistance and wear protection.

TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund