5 g Calibration Weight Button Polished Stainless Steel OIML E1, 0.016 mg Tolerance - KERN

Take advantage of a robust combination of secure storage and precise organisation for calibration weights: a padded wooden case that protects delicate 5 g single weights and keeps high-class instruments ready for use. Order the KERN 317-030-100 wooden case directly via Metav Werkzeuge or ask our consultants if needed. KERN 317-030-100 Wooden Case for 5 g Single Weights — Padded, for Classes E1–F1 KERN 317-030-100 is a purpose-made wooden case for safe storage and transport of single calibration weights in knob/compact form, intended for use in workshops and laboratories Padded wooden case for calibration weights Designed for 5 g single weights E1–F1 Compatible with knob/compact weight form Fits KERN models 307, 316, 317, 326, 327, 329 Protect sensitive weights and maintain calibration reliability The padded interior and solid wooden case construction reduce the risk of impact damage and contamination, helping to preserve the nominal mass of delicate 5 g calibration pieces. For high-precision classes such as E1–F1, uncontrolled knocks or dust can affect measurement results; this storage solution minimises those risks and supports consistent weighing outcomes. The internal padding also prevents abrasion between weights, which contributes to longer intervals between recalibrations and lower downtime for quality checks. Storage designed for official calibration classes and traceability The case is dimensioned for knob/compact design single weights and keeps each weight separated and identifiable, aiding traceability in calibration routines. By organising weights by nominal value and class, the case streamlines handling during audits and routine checks. The clear fit for recognised KERN series units ensures a standardised approach to storage in quality-controlled environments and simplifies inventory checks during ISO- or internal-audit procedures. Practical handling for workshop and laboratory workflows Made from durable wood, the case combines a tactile, classic finish with functional protection, making it suitable for bench-top storage or secure transport between test stations. The form factor and lightweight construction (approx. 0.13 kg) allow technicians to move sets quickly without adding unnecessary bulk to instrument cases. The padded compartments cut down on setup time by keeping frequently used single weights immediately accessible and protected, improving operational efficiency. Compatibility with KERN single weights and ease of organisation Specifically matched to a range of KERN single weights, the case accepts models in the 307–329 series and their knob/compact shapes, supporting consistent handling across a set of precision instruments. This compatibility means fewer custom storage solutions and a consistent standard for workshops that rely on KERN weights for verification tasks. The case supports orderly storage that reduces handling errors and strengthens the overall calibration workflow. Contact Metav Werkzeuge for availability of the KERN 317-030-100 wooden case and expert advice from our Emmerich team via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 317-030-100 Manufacturer: KERN GTIN: 4045761003576 Country of origin: Germany Facts Nominal weight suitability: 5 g Weight of case: 0.13 kg Suitable weight classes: E1–F1 Tariff number: 84239090 Special features Material: wood Interior: padded Compatible with knob/compact single weights Fits KERN models 307, 316, 317, 326, 327, 329 FAQ How many weights fit in the case? The case is dimensioned for single 5 g weights in knob/compact form; capacity depends on the individual compartment layout for the chosen set Is the interior cushioned to protect weights during transport? Yes, the wooden case includes a padded interior to protect precision weights from shocks and abrasion during handling Can this case be used for other nominal values beyond 5 g? The design is optimised for 5 g single weights in knob/compact form; other sizes may not sit securely without modification Does the case meet requirements for storage of E1 class weights? The case provides protective storage suitable for E1–F1 class weights and supports conditions that help preserve mass stability between calibrations Which KERN models are explicitly compatible with this case? Compatibility is declared for KERN single weights in the 307, 316, 317, 326, 327 and 329 series Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271

Take advantage of a compact, durable solution that protects single calibration weights while keeping handling efficient; the combination of robust plastic construction and tailored fit for 5 g weights supports reliable, repeatable storage and transport. Order the case via Metav Werkzeuge or consult our specialists for supply and technical clarification. KERN 317-030-400 Plastic weight case — Protective case for 5 g E2 single weights A KERN 317-030-400 Plastic weight case designed to store and protect single calibration weights in button/compact form, suitable for class E2 calibration use For 5 g single weights (button/compact) Suitable for calibration class E2 Durable plastic protection for weights Compact, lightweight case – 0.02 kg Secure, compliant storage that preserves calibration integrity The compact case offers a tailored pocket for a 5 g nominal weight in button or compact format, ensuring secure placement during storage and transport. By limiting movement and exposure, the design assists in preserving the defined calibration condition required for E2 class weights. The robust plastic shell provides a barrier against dust and incidental contact, reducing the frequency of unnecessary recalibrations and supporting consistent measurement performance in the workshop or laboratory. Practical handling for routine calibration workflows Lightweight construction and a concise footprint make the case convenient to handle and store on benches or in instrument drawers. The case’s dimensions and internal form factor accommodate the typical single-weight format used for spot checks and portable verification, simplifying the logistics of daily calibration tasks. Because the container minimises handling stress and protects the weight from contaminants, procurement of a purpose-made case contributes to operational efficiency and fewer disruptions to measurement routines. Suitable for professionals seeking reliable accessory equipment As a complement to precision balances and test weights, this protective case supports established quality processes by reducing risk to delicate mass artefacts. The combination of a snug fit for single weights, plastic durability and low mass makes it a pragmatic choice for technicians and quality managers who prioritise tool protection and repeatable results. Recommended where calibrated masses are transported between departments or stored with other metrology accessories to maintain traceability and condition. Contact Metav Werkzeuge in Emmerich for tailored supply of the KERN 317-030-400 and expert advice on compatible calibration accessories Technical data SKU: 317-030-400 Manufacturer: KERN GTIN: 4045761081338 Country of origin: DE Customs tariff no.: 84239090 Core specifications Nominal weight compatibility: 5 g Calibration class compatibility: E2 Mass of case: 0.02 kg eCl@ss: 21100103 Materials and features Material: Plastic For single weights, button/compact design Product group: Test weights — protective case Asset image available (product thumbnail) FAQ What weight size does the case accommodate? The case is designed to hold a single 5 g nominal weight in a button/compact format, offering a secure fit for that size. Is the case suitable for E2 calibration class weights? Yes, the design and fit are intended for use with E2 class single weights and support the preservation of calibration condition. What material is the case made from and how does this help? The case is made from durable plastic, which protects against dust and minor impacts while remaining lightweight for easy handling. Can the case be used for other weight formats? The internal form is optimised for button/compact single weights; alternative formats may not sit securely and thus are not recommended with this case. Does the case include any padding or inserts for shock protection? The internal contour secures the weight in place; additional damping is not specified for this model, so care should be taken during transport. KERN — Address: not provided — Contact: not provided

Secure storage and controlled transport for calibration weights, combining aluminium protection with a padded interior to preserve measurement integrity and handling safety. Order the Aluminium-protected Case 317-030-600 directly via Metav Werkzeuge or ask our consultants if needed. Aluminium-protected Case for single calibration weights — KERN 317-030-600, padded protection The Aluminium-protected Case is a compact storage and transport solution engineered for individual calibration weights of 5 g in accuracy classes E1–M3, suitable for button/compact designs and routine calibration workflows. Aluminium outer shell for robust protection Padded interior for safe weight positioning Designed for 5 g calibration weights E1–M3 Compatible with button/compact weight design Preserve calibration integrity with robust protection Robust mechanical protection is essential where traceability and repeatable results matter. The case’s aluminium construction provides a durable barrier against impacts and environmental wear, while the padded interior secures individual weights in their intended position, reducing the risk of nicks or contamination that can alter mass values. This combination helps to maintain calibration stability between official checks and supports reliable measurement routines in both workshops and laboratories. Organised handling that speeds up workflow A well-structured storage solution reduces handling time and the chance of error during transfer and inspection. The protective case is configured for single weights in the button/compact format, allowing clear organisation of reference masses and quick identification during equipment checks. By standardising storage and transport, the case supports efficient calibration workflows and minimises downtime associated with weight handling and verification. Compatibility with accuracy classes and routine use Designed specifically for calibration weights of 5 g in classes E1–M3, the case aligns with common laboratory and industrial accuracy requirements. The stable internal fit and durable shell contribute to consistent conditions for precision weights, aiding in traceable measurement processes and helping to reduce the frequency of corrective recalibrations caused by accidental damage or contamination. For advice on integrating KERN’s aluminium-protected case into existing calibration procedures or to place an order via Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 — consultants are ready to assist with specifications for the 317-030-600 SKU Technical data Article number: 317-030-600 Manufacturer: KERN GTIN: 4045761222649 Origin: CN Tariff code: 84239090 Facts Nominal value: 5 g Accuracy classes: E1–M3 Net weight: 1.1 kg eCl@ss: 21100103 Special features Material: Aluminium Interior: padded Intended use: single weights, button/compact form Suitable product group: calibration weight case FAQ What weight sizes fit this case? The Aluminium-protected Case is configured for 5 g single calibration weights and secures button/compact designs as specified for the KERN 317-030-600. Is the case suitable for transport between sites? Yes; the aluminium exterior and padded interior of the KERN case protect weights during transport and handling, supporting safe transfers and reducing risk of damage. Which accuracy classes does the case support? The case is designed for weights in accuracy classes E1–M3, making it suitable for laboratory and industrial calibration sets that include 5 g reference masses. Can the case be used for other weight formats? The interior is arranged for button/compact single weights; alternative formats may not be secured in the same way without modification, so the 317-030-600 is optimised for the listed design. How does the case help with calibration workflows? By providing organised, secure storage for individual weights, the case reduces handling time and the likelihood of contamination or impact, which supports traceable and repeatable calibration procedures. KERN — Origin: China — Contact details not provided

Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271

Take advantage of secure handling of small calibration weights, robust stainless steel construction and a compact 105 mm length for precise control; order the tweezers directly via Metav Werkzeuge or contact our consultants for application advice. Pinzette 315-243 — Precision tweezers by KERN, stainless steel, 105 mm The Pinzette 315-243 is a precision tweezer designed for the secure handling of small calibration weights in laboratories and workshop environments. Secure grip for micro calibration weights Stainless steel construction Length 105 mm for fine control Suitable for 1 mg – 200 g (E1 – M3) Secure handling for trace and routine calibration tasks The compact design delivers a secure grip for very small test weights, reducing the risk of slippage and accidental contact. Its dimensions, including the 105 mm length, allow for controlled, repeatable handling that supports efficient calibration workflows. This contributes to fewer handling errors and a more consistent weighing routine when working with weights from 1 mg – 200 g. Durable construction that keeps processes dependable Manufactured in stainless steel, the tool combines durability with low maintenance, ensuring longevity in daily metrology use. The robust construction helps maintain geometric stability and handling precision under repeated use, which supports reliable measurement results and reduces downtime for replacements. The design suits both laboratory benches and on-site calibration setups where space and dexterity matter. Practical compatibility and metrology clarity Designed for compatibility with standard calibration classifications, the tweezers are suitable for weights in classes E1 – M3, covering high-accuracy laboratory weights as well as routine workshop standards. For users less familiar with weight classes: these designations indicate recognised accuracy ranges used by calibration professionals and metrology services, ensuring the tool is appropriate for precise, standard-compliant handling. Confidence through expert supply and service Sourcing tools from a trusted partner simplifies procurement and post-sale support. Metav Werkzeuge stands for democratisation of precision, offering an extensive range of metrology supplies from its base in Emmerich. With a broad catalogue and a long-standing customer base, the emphasis is on dependable availability and a clear supply chain that supports uninterrupted calibration operations. Contact Metav Werkzeuge for tailored advice on the KERN 315-243 tweezers and to confirm suitability for specific weight classes — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance from our Emmerich team Technical data Article number: 315 SKU: 315-243 Manufacturer: KERN GTIN: 4045761067615 Length: 105 mm Net weight: 0.02 kg Facts Suitable weight range: 1 mg – 200 g Applicable weight classes: E1 – M3 Material: Stainless steel Special features Secure gripping geometry for small calibration weights Compact format for precise handling and repeatability Designed for laboratory and workshop use Rapid dispatch and broad metrology assortment available from supplier FAQ How small a weight can be handled with these tweezers? The Pinzette 315-243 from KERN is suitable for handling weights from 1 mg up to 200 g, covering the usual micro and small calibration weights used in precise weighing tasks. What material is the tool made from and why does that matter? The tweezers are made from stainless steel, giving corrosion resistance and dimensional stability that support consistent handling and long service life in metrology environments. Are these tweezers suitable for laboratory-grade calibration weights? Yes, the KERN 315-243 is specified for weights in classes E1 – M3, which includes high-accuracy laboratory weights as well as standard workshop classes, making it appropriate for professional calibration work. What are the physical dimensions and weight of the tweezers? The tweezers measure 105 mm in length and have a net weight of 0.02 kg, offering a compact tool that balances control with minimal contact force. Metav Werkzeuge, Emmerich am Rhein, Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930