1mg–5kg Aluminium-Protected Weight Case for Standard Weight Sets, E1–M1 - KERN
€250.00
Product information "1mg–5kg Aluminium-Protected Weight Case for Standard Weight Sets, E1–M1 - KERN"
Take advantage of the combination of robust Aluminium protection, wide compatibility for calibration classes E1–M1, and practical portability for a reliable calibration workflow; order the case directly via Metav Werkzeuge or consult our specialists if additional technical details are required.
Aluminium-protected Case 313-080-600 — Protective case for standard calibration weight sets, aluminium construction (KERN)
The Aluminium-protected Case 313-080-600 is a purpose-built transport and storage solution for standard calibration weight sets, designed to keep precision masses secure during handling and transit in calibration and metrology environments.
- Aluminium-protected housing for durable transport
- Compatible with weight sets 1 mg – 5 kg
- Suitable for calibration classes E1 to M1
Maintain calibration integrity with robust protection
The hard aluminium shell offers mechanical resilience that reduces the risk of shocks and deformation during transport and storage, helping to preserve the calibration condition of precision weights. Intended for nominal values from 1 mg to 5 kg, this case is compatible with the common range of laboratory and laboratory-class weights, including both high-precision and routine sets. By limiting external influence and contamination, the protective enclosure contributes to longer intervals between recalibrations and supports consistent measurement results.
Practical portability that balances strength and handling
Weighing 3.7 kg, the lightweight metal construction of the case provides a balance between sturdy protection and manageable handling for workshop and calibration technicians. The compact format is tailored to accommodate button/compact weight formats commonly used in laboratories and service operations, enabling efficient storage and a clearly defined place for each mass. The robust design from KERN allows secure movement of sets between workstations or to off-site calibration facilities without compromising the integrity of the instruments inside.
Supports traceable workflows and wide class compatibility
Designed for weights in classes E1 through M1, the case covers the spectrum from highest-accuracy reference masses to standard working weights used in routine verification. This compatibility simplifies inventory decisions and reduces the need for multiple specialised housings. The clear association with calibration classes promotes a structured approach to traceability and documentation in quality-controlled environments, ensuring that reference masses remain identifiable and protected throughout handling and storage cycles. The designation 313-080-600 identifies this model for procurement and inventory purposes.
For secure storage and transport of precision weights, choose the KERN aluminium-protected case 313-080-600 and contact Metav Werkzeuge for ordering or tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930.
Technical data
- Article number: 313-080-600
- Manufacturer: KERN
- SKU: 313-080-600
- Material: Aluminium
Facts
- Compatible nominal range: 1 mg – 5 kg
- Calibration classes: E1 – M1
- Case weight: 3.7 kg
Special features
- Suitable for button/compact weight format
- Protected housing for weight sets
- Origin: CN
- Customs tariff number: 84239090
FAQ
What weight ranges are compatible with this case?
The case is designed for standard calibration weights with nominal values from 1 mg to 5 kg, making it suitable for a broad spectrum of laboratory and workshop masses.
Which calibration classes does the case support?
The aluminium-protected case accommodates weights in calibration classes E1 through M1, covering high-precision reference masses and standard working weights.
Is this model suitable for button or compact weights?
Yes, the design is intended to house button/compact weight formats commonly used in calibration sets and laboratory practice.
Who manufactures the case and how is it identified?
The case is manufactured by KERN and is identified by the model number 313-080-600 in technical documentation and ordering.
Manufacturer: KERN — Origin: CN — Contact: not provided
Zubehör
Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Take advantage of a simple, reliable accessory that keeps calibration masses free from dust while preserving accuracy and prolonging service life. The combination of gentle bristles, low weight and practical handling ensures efficient routine maintenance of scales and weights. Order the KERN brush directly via Metav Werkzeuge or consult our advisors for further details. KERN 318-270 Dust Brush — compact brush for gentle cleaning of calibration weights The KERN 318-270 dust brush is a lightweight accessory designed to remove dust and particles from calibration weights and weighing surfaces in laboratories and workshops. Soft bristles for gentle cleaning Designed for calibration weights Lightweight and easy to handle Preserve measurement accuracy with gentle, targeted cleaning Regular cleaning of calibration masses prevents contamination that can alter mass values and affect the repeatability of results. The compact brush offers gentle bristles that remove dust without abrading surfaces or leaving residues, helping to maintain the precision of weights used in verification and calibration. For technicians and workshop teams, this reduces the frequency of recalibration and supports consistent measurement quality across production and quality-assurance processes. Practical handling for routine maintenance and quick interventions The accessory is intentionally lightweight and easy to manoeuvre during daily maintenance tasks, enabling swift removal of particles from weight stacks and pans without disassembly. Ergonomic handling minimises the risk of accidental knocks or slips near sensitive balances, while the brush design supports access to small grooves and recessed areas. This results in faster cleaning cycles and less downtime, contributing to a more efficient workflow in busy metrology environments. Reliability in supply and fit for professional environments The brush is supplied by a recognised manufacturer for weighing technology and suits workshops, service departments and calibration laboratories that require straightforward maintenance tools. Paired with Metav Werkzeuge’s role as a dependable distributor, this accessory supports a transparent supply chain and practical on-bench readiness. Investing in simple, purpose-built maintenance tools safeguards the performance of weighing equipment and complements broader quality-management measures. Contact Metav Werkzeuge to procure the KERN 318-270 dust brush for dependable maintenance of calibration weights or to request additional technical information Technical data Article number: 318 SKU: 318-270 Manufacturer: KERN GTIN: 4045761004146 Facts Weight: 0.01 kg Eclass: 21041109 Special features Suitable for cleaning calibration weights Rapid dispatch available via distributor FAQ How does this brush protect calibration accuracy? The brush removes dust and particles that can adhere to masses; using the KERN 318-270 dust brush helps maintain the declared mass values and stable measurement results. Is the brush suitable for all types of laboratory weights? The brush is intended for routine cleaning of calibration weights and standard weighing pans; compatibility with specialised mass geometries should be assessed case by case. Can the brush be used on balance pans without causing damage? Yes, the soft bristles are designed for gentle cleaning and avoid abrasive contact that could harm pans or plated surfaces. Manufacturer: KERN — Address: not specified — Contact: not specified