1 g–5 kg Test Weight Set Three-Point Knob Polished Stainless Steel, Aluminium Case, OIML E2 - KERN
€2,590.00
Product information "1 g–5 kg Test Weight Set Three-Point Knob Polished Stainless Steel, Aluminium Case, OIML E2 - KERN"
Take advantage of OIML E2 accuracy combined with polished stainless-steel masses and a secure aluminium case for consistent, traceable calibrations. Order the weight set directly via Metav Werkzeuge or consult our advisors for specification support.
KERN 314-086 weight set (OIML E2, 1 g–5 kg)
The KERN 314-086 weight set is a precision mass set for calibration of laboratory and industrial scales, covering the 1 g–5 kg range and supplied in a protective aluminium case.
- OIML class E2 accuracy
- Range 1 g–5 kg
- Polished stainless-steel buttons
- Supplied in aluminium case
Dependable accuracy for routine and accredited calibrations
The set is designed to provide consistent measuring accuracy for calibration tasks where reproducibility is essential. Certified to OIML E2, the masses support checks and adjustments of a wide range of balances and scales used in laboratories and production control. The combination of class rating and a comprehensive mass range ensures that calibrations meet regulatory and internal quality requirements with fewer instruments, reducing calibration cycles and administrative overhead.
Robust design that protects performance and handling
Each mass is made from polished stainless steel, which enhances corrosion resistance and reduces surface contamination that can affect results. The button shape minimises contact area and handling error during use, while the aluminium case organises the set securely for transport and storage. These design choices translate into lower handling losses, quicker set-up times and extended service life of the masses, sustaining measurement integrity over regular use.
Practical benefits for workshop and laboratory workflows
Using a single, certified mass set for intermediate and routine calibrations reduces instrument downtime and simplifies documentation. The clear 1 g–5 kg gradation allows rapid selection of reference masses for stepwise checking, promoting an efficient calibration routine. For teams managing quality systems, the set contributes to traceable measurement chains and supports conformity with internal procedures and external audits.
Care, compatibility and application notes
Polished stainless-steel masses are compatible with a broad range of weighing equipment commonly found in industry and research. Gentle cleaning with lint-free cloths and approved solvents preserves the surface finish and accuracy; avoid oils and abrasive agents. The compact storage in the aluminium case protects the set from mechanical damage and environmental contamination, helping maintain calibration intervals with minimal additional maintenance.
Discuss calibration requirements with Metav Werkzeuge — request the KERN 314-086 mass set or technical advice from our Emmerich team via info@metav-werkzeuge.com or call +49 2822 7131930
Technical Data
- Article number: 314-086
- Manufacturer: KERN
- GTIN: 4045761223165
- SKU: 314
- Country of origin: DE
Facts
- Range: 1 g–5 kg
- Total weight: 12.6 kg
- OIML class: E2
- Tariff number: 84239090
Special features
- Material: Polished stainless steel
- Form: Button shape
- Case: Aluminium case
- eClass: 32120103
FAQ
What level of accuracy does the set provide?
The set meets OIML E2 accuracy, suitable for laboratory and high-precision calibration tasks where class E2 compliance is required.
Is the mass set suitable for routine workshop calibrations?
Yes, the 1 g–5 kg range covers common workshop and industrial-scale checks; the durable case and polished surfaces help maintain performance in regular use.
How should the masses be cleaned to preserve accuracy?
Clean with a lint-free cloth and approved, non-abrasive solvents; avoid oils and abrasive cleaners to protect the polished surfaces and measurement integrity.
Does the set support traceability for audits and quality systems?
The certified OIML E2 rating and clear identification of masses support traceable calibration records and audit requirements when maintained according to recommended procedures.
Can the set be transported without risk to accuracy?
The aluminium case provides secure storage and protects the masses from shocks and contamination during transport; proper handling minimises the need for frequent recalibration.
Manufacturer: KERN — Germany — Sales and enquiries via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930
Zubehör
Take advantage of the combination of robust Aluminium protection, wide compatibility for calibration classes E1–M1, and practical portability for a reliable calibration workflow; order the case directly via Metav Werkzeuge or consult our specialists if additional technical details are required. Aluminium-protected Case 313-080-600 — Protective case for standard calibration weight sets, aluminium construction (KERN) The Aluminium-protected Case 313-080-600 is a purpose-built transport and storage solution for standard calibration weight sets, designed to keep precision masses secure during handling and transit in calibration and metrology environments. Aluminium-protected housing for durable transport Compatible with weight sets 1 mg – 5 kg Suitable for calibration classes E1 to M1 Maintain calibration integrity with robust protection The hard aluminium shell offers mechanical resilience that reduces the risk of shocks and deformation during transport and storage, helping to preserve the calibration condition of precision weights. Intended for nominal values from 1 mg to 5 kg, this case is compatible with the common range of laboratory and laboratory-class weights, including both high-precision and routine sets. By limiting external influence and contamination, the protective enclosure contributes to longer intervals between recalibrations and supports consistent measurement results. Practical portability that balances strength and handling Weighing 3.7 kg, the lightweight metal construction of the case provides a balance between sturdy protection and manageable handling for workshop and calibration technicians. The compact format is tailored to accommodate button/compact weight formats commonly used in laboratories and service operations, enabling efficient storage and a clearly defined place for each mass. The robust design from KERN allows secure movement of sets between workstations or to off-site calibration facilities without compromising the integrity of the instruments inside. Supports traceable workflows and wide class compatibility Designed for weights in classes E1 through M1, the case covers the spectrum from highest-accuracy reference masses to standard working weights used in routine verification. This compatibility simplifies inventory decisions and reduces the need for multiple specialised housings. The clear association with calibration classes promotes a structured approach to traceability and documentation in quality-controlled environments, ensuring that reference masses remain identifiable and protected throughout handling and storage cycles. The designation 313-080-600 identifies this model for procurement and inventory purposes. For secure storage and transport of precision weights, choose the KERN aluminium-protected case 313-080-600 and contact Metav Werkzeuge for ordering or tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 313-080-600 Manufacturer: KERN SKU: 313-080-600 Material: Aluminium Facts Compatible nominal range: 1 mg – 5 kg Calibration classes: E1 – M1 Case weight: 3.7 kg Special features Suitable for button/compact weight format Protected housing for weight sets Origin: CN Customs tariff number: 84239090 FAQ What weight ranges are compatible with this case? The case is designed for standard calibration weights with nominal values from 1 mg to 5 kg, making it suitable for a broad spectrum of laboratory and workshop masses. Which calibration classes does the case support? The aluminium-protected case accommodates weights in calibration classes E1 through M1, covering high-precision reference masses and standard working weights. Is this model suitable for button or compact weights? Yes, the design is intended to house button/compact weight formats commonly used in calibration sets and laboratory practice. Who manufactures the case and how is it identified? The case is manufactured by KERN and is identified by the model number 313-080-600 in technical documentation and ordering. Manufacturer: KERN — Origin: CN — Contact: not provided