1 mg–2 kg Weight Set, OIML F1 Polished Stainless Steel Knob Weights, Aluminium Case - KERN
€1,590.00
Product information "1 mg–2 kg Weight Set, OIML F1 Polished Stainless Steel Knob Weights, Aluminium Case - KERN"
Take advantage of high metrological accuracy and robust storage in one compact kit; the combination of OIML Class F1 conformity, polished stainless-steel weights and an aluminium case ensures reliable calibrations and long-term usability. Order the set directly via Metav Werkzeuge or ask our consultants for specification support.
KERN 323-076 Weight Set — OIML Class F1, 1 mg–2 kg, polished stainless steel
The KERN 323-076 is a calibrated weight set for laboratory and calibration applications, supplied in an aluminium case and including milligram weights housed in a separate plastic insert.
- OIML Class F1 accuracy
- Range 1 mg–2 kg in button form
- Polished stainless-steel weights
- Milligram set in separate plastic case
High-precision compliance for reliable results
The calibration set meets OIML Class F1, which denotes a high degree of accuracy for verification and calibration tasks in laboratories and quality-control departments. This classification means the weights are manufactured and matched to tight tolerances, enabling consistent measurement results when checking balances and scales. The 1 mg–2 kg spread covers micro to medium loads, reducing the need for multiple specialised kits and streamlining calibration workflows. Users benefit from reduced uncertainty and clearer traceability when integrating these weights into regular verification routines.
Protective design that preserves accuracy
Construction in polished stainless steel minimises surface contamination and offers good corrosion resistance, which helps maintain mass stability over time. The button-shaped design simplifies handling and placement on balance pans, while the included aluminium case provides secure storage and transport protection. Milligram weights from 1 mg to 500 mg are supplied in a separate plastic insert inside the case to prevent small pieces from shifting during movement. These features together reduce handling errors and support repeatable calibration cycles, translating into fewer interruptions and more reliable production checks.
Practical suitability across calibration tasks
This calibration kit is suitable for use in metrology labs, production quality control and service environments where precise mass standards are required. The set’s format reduces inventory complexity by covering a wide nominal range within one compact system, and the durable case design supports frequent use on the shop floor or in mobile calibration routines. Clear material choice and form factor make cleaning straightforward and handling predictable, which simplifies standard operating procedures and helps maintain long-term measurement integrity.
For tailored advice and reliable supply from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271.
Technical Data
- SKU: 323-076
- Manufacturer: KERN
- GTIN: 4045761223776
- OIML class: F1
- Product category: Weight set
- Tariff code: 84239090
- Country of origin: Germany
Facts
- Nominal range: 1 mg–2 kg
- Total weight: 5.23 kg
- Article number: 323
Special features
- Polished stainless-steel construction
- Button-shaped weights
- Milligram weights 1 mg–500 mg in separate plastic case
- Aluminium case
- Intended for calibration and verification tasks
FAQ
What does OIML Class F1 mean for laboratory use?
OIML Class F1 indicates a high-precision mass standard suitable for calibration and verification work; the KERN 323-076 weight set adheres to these tolerances for consistent measurement checks.
Are the smallest weights stored separately?
Yes, milligram weights (1 mg–500 mg) are supplied in a separate plastic insert within the aluminium case to protect them from movement and contamination.
Which materials are the weights made from?
The weights are made of polished stainless steel, providing good corrosion resistance and ease of cleaning for long-term stability.
Is this set suitable for on-site service calibrations?
The robust case and comprehensive nominal range make the set practical for mobile calibration routines; however, no on-site demonstration is offered with the product.
What is the manufacturer and SKU for ordering?
The set is manufactured by KERN and is available under SKU 323-076.
KERN — Germany — Contact: not specified
Zubehör
Lean on robust aluminium protection, compatibility with E1–M1 calibration classes and a compact layout for reliable storage and transport of calibration weights. Order the aluminium-protected case directly via Metav Werkzeuge or ask our consultants if needed. Aluminium-protected Case 313-070-600 — KERN; for 1 mg–2 kg, E1–M1 The Aluminium-protected Case 313-070-600 is designed to protect and organise standard calibration weight sets from 1 mg to 2 kg, delivering secure storage and easy handling in laboratory and workshop environments. Aluminium protection for secure storage Compatible with E1–M1 calibration classes Accommodates 1 mg–2 kg weight range Designed for button/compact weight sets Protection tailored to metrology needs The case is constructed from aluminium, providing a corrosion-resistant and impact-resistant shell that reduces the risk of contamination and mechanical damage during transport or storage. For precision weights, surface integrity and a dust-free environment are essential; the sturdy housing preserves the calibration condition of weights used in high-accuracy applications. By combining a rigid outer shell with an interior layout that minimises movement, the system supports long-term measurement reliability and reduces the need for frequent recalibration. Organised layout to speed up calibration workflows A clear internal arrangement for button/compact weights streamlines the preparation and execution of calibration procedures. The defined compartments allow quick identification and retrieval of the required nominal values, saving time in routine checks and audit preparations. Reduced handling lowers the chance of fingerprints or particles affecting mass standards, which in turn supports consistent results and accelerates workflow in both metrology laboratories and service departments. Built for longevity and practical handling Lightweight yet robust construction balances portability with protection: the case is easy to carry between workstations while still guarding sensitive standards from shocks. The durable shell minimises wear under regular use and the compact footprint requires little bench space. This combination of robust construction and practical ergonomics helps maintain operational uptime and lowers the total cost of ownership through fewer damaged items and less downtime. Practical compatibility with recognised calibration classes Designed specifically for calibration sets covering 1 mg–2 kg, the case accommodates weights across internationally recognised categories, including E1–M1 classes. These classes indicate the tolerance and intended application range of the weights; E1 denotes the highest precision for laboratory reference standards, while M1 suits routine and industrial checks. The 313-070-600 therefore supports both laboratory-grade storage and workshop-level transport requirements without compromise. Contact Metav Werkzeuge in Emmerich for tailored advice on KERN cases and suitable weight handling—email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 313-070-600 Manufacturer: KERN Material: Aluminium Origin country: CN Facts Weight: 1.25 kg Nominal range: 1 mg–2 kg Calibration classes: E1–M1 Eclass: 21100103 HS code: 84239090 Special features Aluminium-protected case for weight sets Suitable for button/compact weights Product group: Aluminium-protected cases SKU: 313-070-600 FAQ Which nominal weights fit in this case? The case is suitable for calibration weights ranging from 1 mg to 2 kg, covering common laboratory and workshop sets. Is the case compatible with high-precision weights? Yes, the design supports E1 class weights as well as M1, making it appropriate for high-precision laboratory standards and routine industrial weights. What material is the case made of and why is that important? The case is made from aluminium, chosen for its corrosion resistance and impact protection, which helps preserve the condition of calibration masses. Can the case be used for transport between sites? The robust aluminium shell and secure internal organisation make the case suitable for safe transport of weight sets between workstations or to off-site calibrations. KERN — Address: not specified; Contact: info@metav-werkzeuge.com | +49 2822 7131930