1 mg–5 kg Calibration Weight Set Three-Point, Polished Stainless Steel Buttons, Aluminium Case - KERN
€1,960.00
Product information "1 mg–5 kg Calibration Weight Set Three-Point, Polished Stainless Steel Buttons, Aluminium Case - KERN"
Take advantage of the combination of OIML Class F1 precision, a wide 1 mg–5 kg nominal range and robust stainless construction for dependable calibration results; order the weight set directly via Metav Werkzeuge or consult our specialists if required.
KERN 323-086 — OIML Class F1 stainless steel weight set (1 mg–5 kg)
The KERN 323-086 is a calibrated weight set for laboratory and industrial use, delivered as knob-shaped stainless steel masses in an aluminium case for secure storage and transport
- OIML Class F1 certified accuracy
- Range 1 mg–5 kg in knob weights
- Polished stainless steel construction
- Supplied in robust aluminium case
Confidence in measurement and traceability for routine calibration
The set provides OIML Class F1 conformity, ensuring consistent, documented mass values for routine verification and calibration tasks in production and testing environments. With a 1 mg–5 kg nominal range, this kit supports a broad spectrum of scales and balances, simplifying inventory of standards and reducing the need for multiple separate sets. The calibrated masses allow clear linkage to traceable standards, which aids audit readiness and reduces measurement uncertainty during quality checks.
Durable materials and secure handling for long service life
Constructed from polished stainless steel, the masses resist corrosion and handling wear, preserving nominal values and surface quality over time. The knob form facilitates safe picking with tweezers or gloves and reduces the risk of fingerprints that could alter mass values. All items are supplied in a sturdy aluminium case, with the smallest milligram weights (1 mg–500 mg) housed in a separate plastic case for added protection and easy organisation, helping to maintain calibration stability between uses.
Streamlined workflow for laboratories and quality control
Designed for application in calibration labs, manufacturing quality control and inspection benches, the set reduces downtime by offering a comprehensive range of standards in a single kit. Clear material selection and robust packaging lower maintenance needs and storage concerns, while the labelled masses simplify selection during routine checks. The construction and scope of the kit support repeatable procedures, enabling faster verification cycles and consistent pass/fail decisions during process control.
Contact Metav Werkzeuge in Emmerich for expert advice and secure supply of KERN mass standards, or email info@metav-werkzeuge.com and call +49 2822 7131930 for procurement details
Technical data
- Article number: 323
- SKU: 323-086
- GTIN: 4045761223769
- Manufacturer: KERN
- Origin: DE
- OIML class: F1
- Nominal range: 1 mg–5 kg
- Material: Polished stainless steel
- Case: Aluminium
- Form: Knob shape
- Packaging note: milligram weights 1 mg–500 mg in separate plastic case
Facts
- Total weight: 12.68 kg
- Tariff code: 84239090
- ECLASS: 32120103
Special features
- OIML F1 calibration set
- Knob-shaped masses
- Polished stainless steel surfaces
- Aluminium carrying case
- Milligram set separated in plastic box
FAQ
How precise is this weight set for calibration work? The KERN 323-086 weight set meets OIML Class F1 specifications, providing precision suitable for routine laboratory and industrial calibration tasks.
Are the smallest weights protected for handling and storage? Yes, the milligram weights (1 mg–500 mg) are supplied in a separate plastic case within the aluminium case to reduce handling risk and protect the smallest standards.
Can this set be used across different scales and balances? The 1 mg–5 kg range allows the set to cover a wide variety of scales and balances commonly used in quality control and test laboratories, offering flexible application.
What materials and packaging ensure long-term stability? Polished stainless steel masses with a sturdy aluminium case support resistance to wear and stable storage conditions for prolonged use of the KERN 323-086 set.
Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich am Rhein, Germany; Contact: info@metav-werkzeuge.com, +49 2822 7131930
Zubehör
Take advantage of the combination of robust Aluminium protection, wide compatibility for calibration classes E1–M1, and practical portability for a reliable calibration workflow; order the case directly via Metav Werkzeuge or consult our specialists if additional technical details are required. Aluminium-protected Case 313-080-600 — Protective case for standard calibration weight sets, aluminium construction (KERN) The Aluminium-protected Case 313-080-600 is a purpose-built transport and storage solution for standard calibration weight sets, designed to keep precision masses secure during handling and transit in calibration and metrology environments. Aluminium-protected housing for durable transport Compatible with weight sets 1 mg – 5 kg Suitable for calibration classes E1 to M1 Maintain calibration integrity with robust protection The hard aluminium shell offers mechanical resilience that reduces the risk of shocks and deformation during transport and storage, helping to preserve the calibration condition of precision weights. Intended for nominal values from 1 mg to 5 kg, this case is compatible with the common range of laboratory and laboratory-class weights, including both high-precision and routine sets. By limiting external influence and contamination, the protective enclosure contributes to longer intervals between recalibrations and supports consistent measurement results. Practical portability that balances strength and handling Weighing 3.7 kg, the lightweight metal construction of the case provides a balance between sturdy protection and manageable handling for workshop and calibration technicians. The compact format is tailored to accommodate button/compact weight formats commonly used in laboratories and service operations, enabling efficient storage and a clearly defined place for each mass. The robust design from KERN allows secure movement of sets between workstations or to off-site calibration facilities without compromising the integrity of the instruments inside. Supports traceable workflows and wide class compatibility Designed for weights in classes E1 through M1, the case covers the spectrum from highest-accuracy reference masses to standard working weights used in routine verification. This compatibility simplifies inventory decisions and reduces the need for multiple specialised housings. The clear association with calibration classes promotes a structured approach to traceability and documentation in quality-controlled environments, ensuring that reference masses remain identifiable and protected throughout handling and storage cycles. The designation 313-080-600 identifies this model for procurement and inventory purposes. For secure storage and transport of precision weights, choose the KERN aluminium-protected case 313-080-600 and contact Metav Werkzeuge for ordering or tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 313-080-600 Manufacturer: KERN SKU: 313-080-600 Material: Aluminium Facts Compatible nominal range: 1 mg – 5 kg Calibration classes: E1 – M1 Case weight: 3.7 kg Special features Suitable for button/compact weight format Protected housing for weight sets Origin: CN Customs tariff number: 84239090 FAQ What weight ranges are compatible with this case? The case is designed for standard calibration weights with nominal values from 1 mg to 5 kg, making it suitable for a broad spectrum of laboratory and workshop masses. Which calibration classes does the case support? The aluminium-protected case accommodates weights in calibration classes E1 through M1, covering high-precision reference masses and standard working weights. Is this model suitable for button or compact weights? Yes, the design is intended to house button/compact weight formats commonly used in calibration sets and laboratory practice. Who manufactures the case and how is it identified? The case is manufactured by KERN and is identified by the model number 313-080-600 in technical documentation and ordering. Manufacturer: KERN — Origin: CN — Contact: not provided