1 mg–500 g Weight Set F1 Eco Form Polished Stainless Steel In Aluminium Case - KERN
€810.00
Product information "1 mg–500 g Weight Set F1 Eco Form Polished Stainless Steel In Aluminium Case - KERN"
For consistent, traceable verification choose the combination of OIML F1 accuracy, polished stainless steel construction and a secure aluminium case for protected storage. Order the KERN 325-056 weight set directly via Metav Werkzeuge or consult our specialists for application guidance.
KERN 325-056 weight set — OIML F1, 1 mg–500 g, polished stainless steel
A KERN 325-056 weight set designed for calibrated verification of precision balances in laboratory and industrial metrology
- OIML class F1 accuracy
- Range 1 mg–500 g in Eco‑Form
- Polished stainless steel weights
- Aluminium case for secure transport
Precise verification for regulated workflows
The set is specified to OIML F1, which makes it suitable for routine verification and calibration of precision balances where tight tolerances are required. Calibrated nominal values from 1 mg–500 g cover the typical spectrum for analytical and precision scales, enabling systematic checks of linearity and repeatability. Using an F1-class set reduces uncertainty in measurements, supports compliance with internal quality procedures and helps maintain reliable production and test results.
Durable design to protect fine masses
Constructed from polished stainless steel and shaped in Eco‑Form to ease handling and reduce surface contact, the set balances robust durability with careful mass preservation. The larger milligram weights are supplied in a separate plastic case to avoid contamination, while the main collection is housed in an aluminium case for secure storage and transport. The compact design minimises handling errors and supports longer intervals between corrective maintenance.
Traceability and operational benefits
Certified components and clear nominal values support traceable calibration, which shortens downtime during routine verifications and strengthens documentation for audits. The controlled material finish and form reduce the risk of surface corrosion, preserving accuracy over time and lowering the frequency of recalibration. Designed for laboratory and workshop environments, this collection streamlines verification workflows and supports consistent quality control procedures.
For reliable, traceable calibration solutions, order the KERN 325-056 weight set via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and delivery options.
Technical Data
- Article number: 325
- SKU: 325-056
- GTIN: 4045761224186
- Manufacturer: KERN
Specifications
- Nominal range: 1 mg–500 g
- OIML class: F1
- Total weight (set): 0.79 kg
- Commodity code: 84239090
- eClass: 32120103
- Country of origin: DE
Special features
- Form: ECO‑Form
- Material: polished stainless steel
- Case material: aluminium
- Milligram weights supplied in separate plastic case
FAQ
What accuracy class does this weight set meet?
The KERN 325-056 weight set meets OIML F1 accuracy class requirements, suitable for calibration and verification of precision balances.
Is the set complete for routine balance checks?
Yes, the set covers the nominal range 1 mg–500 g, providing a comprehensive spread of masses for routine verification and linearity testing.
How are the smallest weights supplied?
Milligram weights (1 mg–500 mg) are supplied in a separate plastic case within the aluminium case to reduce handling contamination and protect surface integrity.
What materials and forms protect long‑term accuracy?
Weights are made of polished stainless steel in Eco‑Form to reduce contact area and surface wear; the outer aluminium case provides secure storage for transport and workshop use.
Can this set support traceable documentation for audits?
The KERN 325-056 weight set is specified and filed with nominal values suitable for traceable calibration procedures and documentation in quality audits.
Manufacturer: KERN — Origin: Germany — GTIN: 4045761224186
Zubehör
Take advantage of the combination of robust aluminium protection, precise compatibility with calibration classes and a lightweight, compact design to keep standard weight sets organised and safe. Order the case directly via Metav Werkzeuge or ask our consultants for tailored advice. Aluminium-protected Case KERN 313-050-600 — protective case for standard weight sets, 1 mg–500 g The Aluminium-protected Case is a lightweight, rigid transport and storage solution designed for standard calibration weight sets in laboratory and workshop environments. Aluminium-protected construction Suitable for 1 mg–500 g weight sets Compatible with classes E1–M1 Knob/compact format for efficient storage Built for reliable calibration workflows and secure transport The case’s aluminium-protected outer shell delivers mechanical resilience without excessive mass, providing secure transport for sensitive calibration masses. Designed for 1 mg–500 g weight sets and compatible with E1–M1 accuracy classes, the etui secures individual pieces in a knob/compact layout that minimises movement during handling. This reduces the risk of damage and the need for recalibration, supporting continuous, predictable operation in metrology chains. Organised layout that speeds up daily routines A compact internal arrangement keeps weights separated and accessible, enabling faster selection and return to storage during quality control cycles. The knob/compact configuration simplifies identification and handling of small masses while preserving their surfaces and tolerances. For workshops and laboratories that prioritise efficiency, the structured interior contributes to a smoother workflow and fewer interruptions for searches or cleaning. Robust protection without compromising portability With a total mass of approximately 0.7 kg, the case balances robust protection with easy handling. The aluminium construction shields contents from external mechanical impacts and environmental strain during transport. The rigid shell also serves as a practical protective barrier in shared storage areas, reducing the likelihood of accidental knocks affecting highly accurate weight sets. Suitable for standardised metrology environments Intended for standard weight sets in the knob/compact form and for use with E1–M1 classes, the case supports conformity and traceability requirements common in calibration labs and regulated production environments. The design focuses on preserving the geometric and surface integrity of masses used for calibration, contributing to reliable measurement chains and fewer unplanned calibrations. Contact Metav Werkzeuge in Emmerich for detailed advice on integrating the KERN 313-050-600 aluminium-protected case into calibration routines or to request further technical specifications: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 313 SKU: 313-050-600 Manufacturer: KERN Material: aluminium Weight: 0.7 kg Suitable for: 1 mg–500 g Classes: E1–M1 GTIN: 4045761222786 Country of origin: CN Tariff code: 84239090 Facts Range: 1 mg–500 g Mass (case): 0.7 kg Accuracy classes supported: E1–M1 GTIN numeric identifier: 4045761222786 Special features Aluminium-protected outer shell Knob/compact internal layout for weight sets Designed for standard weight sets Compact, portable format Suitable for laboratory and workshop use FAQ What weight range does the case accommodate? The case is designed for weight sets from 1 mg–500 g, suitable for compact or knob-style masses. Which calibration classes are compatible with this case? The KERN aluminium-protected case supports E1–M1 classes, making it suitable for high-precision laboratory and calibration environments. What material is the case made from? The outer shell is aluminium, chosen for its combination of rigidity and low weight. How heavy is the empty case? The case weighs approximately 0.7 kg, offering protection while remaining portable. Is the case suitable for workshop transport? Yes; the robust aluminium construction and compact layout protect masses during routine transport within workshops and between lab benches. Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271