10 kg Calibration Weight Block Polished Stainless Steel OIML Class F1, 50 mg Tolerance - KERN
€1,380.00
Product information "10 kg Calibration Weight Block Polished Stainless Steel OIML Class F1, 50 mg Tolerance - KERN"
Take advantage of proven traceability and robust construction combined with simple handling for reliable balance verification. The polished stainless-steel block design and OIML Class F1 accuracy ensure repeatable mass values; order directly via Metav Werkzeuge or consult our specialists for calibration and accessory recommendations.
KERN 326-37 block calibration weight (OIML Class F1, 10 kg)
The KERN 326-37 is a precision calibration weight in a knob-shaped block, designed for verification of laboratory and industrial balances with high repeatability
- OIML class F1 accuracy
- 10 kg nominal mass
- Polished stainless steel finish
- Knob-shaped block for easy handling
Consistent results through certified accuracy
The calibrated block offers OIML Class F1 performance with a nominal mass of 10 kg and a specified tolerance of 50 mg, which supports reproducible verification routines for mid-range balances. The tight tolerance reduces measurement uncertainty during routine checks and helps maintain production quality. The specification is suitable for laboratory and industrial verification tasks where mid-level precision is required and where documented mass values contribute to traceability.
Robust material and ergonomic design for daily use
Constructed from polished stainless steel, the block resists corrosion and can be cleaned without affecting the mass surface, reducing maintenance effort and extending service life. The knob-shaped geometry improves handling during calibration cycles, lowering the risk of slips and accidental surface contact that might alter the mass. The compact block design also minimises footprint in storage and work areas, while the polished finish helps to avoid particulate build-up that could influence repeated comparisons.
Compliance, calibration and recommended accessories
With the approaching change in marking procedures, the product data notes that initial EU-type approvals will not be available after 30 November 2025; a DAkkS calibration is therefore recommended for traceable certification equivalent for most applications. For storage and transport, a protective case is advised to preserve accuracy and prevent handling marks. When documented traceability and official calibration certificates are required, choose accredited calibration options to ensure the mass values meet organisational and regulatory demands.
Contact Metav Werkzeuge in Emmerich for advice on DAkkS calibration, accessory cases and procurement of the KERN 326-37 calibration weight via info@metav-werkzeuge.com or +49 2822 7131930
Technical Data
- SKU: 326-37
- GTIN: 4045761232860
- Manufacturer: KERN
- Origin: Germany
- Form: Knob-shaped block
Facts
- Nominal mass: 10 kg
- OIML class: F1
- Tolerance: 50 mg
- Tariff code: 84239090
Special features
- Polished stainless steel
- Knob-shaped block design
- Recommended protective case for transport and storage
- Suitable for verification of laboratory and industrial balances
- DAkkS calibration recommended
FAQ
What level of accuracy does this weight provide?
The KERN 326-37 calibration weight meets OIML Class F1 with a tolerance of 50 mg, making it suitable for reproducible balance verifications and mid-level precision checks.
Is the material suitable for workshop environments?
Yes, the polished stainless-steel construction resists corrosion and is suitable for both laboratory and industrial environments where routine cleaning and durability are required.
Should the weight be calibrated before first use?
A DAkkS calibration is recommended to obtain traceable certification; this aligns the KERN 326-37 with documented measurement systems and regulatory needs.
How should the weight be handled to preserve accuracy?
Handle the knob-shaped block by the designated grip, avoid touching the mass surfaces, and store in a protective case to prevent surface damage that could affect the mass value.
Can this weight be used for legal-for-trade approval?
The weight is specified to OIML Class F1; note that initial EU-type approval processes change from 30 November 2025, so DAkkS calibration is advised for equivalent traceability in most applications.
KERN, Germany – contact details not provided in product data
Zubehör
Take advantage of a robust combination of lightweight aluminium protection and a padded interior that secures sensitive block calibration weights, keeping calibration routines reliable and damage risk low. The case's compatibility with block weights up to 10 kg and calibration classes F1–M3 supports consistent handling and storage practices. Order the aluminium-protected case directly via Metav Werkzeuge or ask the consultants if needed. Aluminium-protected case 346-070-600 by KERN — padded protection for block weights up to 10 kg The Aluminium-protected case 346-070-600 is a padded transport and storage case designed for block calibration weights, intended for secure handling and protected storage in calibration labs and workshops. Aluminium shell for secure protection Padded interior for sensitive weights Designed for block weights up to 10 kg Compatible with calibration classes F1–M3 Secure storage that protects calibration investments The hard aluminium outer shell is engineered to shield precision weights from impacts and abrasion during transport and storage, while the padded interior prevents localised pressure and scratching. This combination reduces the risk of accidental damage that can compromise traceability and repeatability, ensuring that calibration assets remain within tolerance longer. The protective design therefore supports efficient quality control processes and lowers the likelihood of costly recalibration or replacement. Suitable for calibration classes F1–M3 and block-format weights Built specifically for block weights and validated for calibration classes F1–M3, the case meets common requirements in metrology and workshop calibration routines. Using a dedicated storage solution helps retain the mass standard's condition and simplifies conformity during routine checks. For teams managing reference standards or performing on-site verifications, the documented compatibility with these classes makes the case a pragmatic choice for maintaining measurement integrity. Lightweight, compact and ready for daily workflows Weighing just 1.35 kg, the transport case is easy to carry and stow, integrating seamlessly into mobile calibration kits or fixed laboratory storage. Its compact footprint preserves bench and storage space while the robust construction supports repeated handling. The practical format contributes to smooth logistics, keeping calibration artefacts organised and accessible so that measuring processes remain efficient and downtime is minimised. For reliable protection of block calibration weights, request the KERN aluminium-protected case 346-070-600 via Metav Werkzeuge — Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 346-070-600 Manufacturer: KERN GTIN: 4045761222885 Origin: CN Core specifications Weight: 1.35 kg Suitable for weights: up to 10 kg Calibration classes: F1–M3 Format: Block Materials & special features Material: Aluminium Interior: padded Design: for block weights Tariff number: 84239090 FAQ Is this case suitable for 10 kg block weights? Yes. The KERN aluminium-protected case 346-070-600 is designed for block weights up to 10 kg and accommodates the block format securely. Which calibration classes are supported? The case is specified for calibration classes F1–M3, making it suitable for a wide range of routine and laboratory-level mass standards. What material is the outer shell made from? The outer shell is made of aluminium, chosen for its combination of lightness and mechanical protection. Does the case include interior padding? Yes. The interior is padded, providing cushioning and a secure fit for sensitive calibration weights. What is the case weight and how portable is it? The empty case weighs 1.35 kg, offering a compact and portable solution for mobile calibration workflows. KERN — Origin: CN. Manufacturer contact not provided.