1 mg–500 mg Precision Weight Set, F1 Class, Polished Stainless Steel Plates, Plastic Case - KERN

Benefit from robust plastic construction, compatibility with single nominal values 1 mg–500 mg and secure organisation for calibration weights of classes E1–M2, ensuring reliable storage and easy handling. Order the case directly via Metav Werkzeuge or ask our consultants if needed. KERN 347-009-400 Plastic Case for Single Calibration Weights – for 1 mg–500 mg, E1–M2 The KERN 347-009-400 is a compact plastic case designed to protect and organise single calibration weights for laboratories, service engineers and workshop calibration tasks. Compact plastic case for calibration weights Fits single weights from 1 mg to 500 mg Compatible with classes E1 to M2 Lightweight at approx. 0.02 kg Protects precision weights during storage and transport The case provides secure storage for individual calibration weights, reducing the risk of contamination and handling damage that can alter mass values. The internal layout is adapted for button/compact designs commonly used in calibration sets; this keeps each weight separated and stable during transport. By using a dedicated enclosure made from durable plastic, routine handling becomes more predictable and safer for sensitive measurement artefacts. Ensures compatibility with recognised accuracy classes Designed for nominal values from 1 mg–500 mg, the enclosure supports weights used across common accuracy classes E1–M2, which makes it suitable for laboratory checks and field calibration. For readers less familiar with classes: E1 and M2 denote standardised tolerance ranges used in legal and laboratory metrology; storing weights in the correct case helps maintain traceability and reduces the chance of cross-contamination that could compromise conformity checks. Lightweight, compact design for efficient workflow At roughly 0.02 kg, the case contributes negligible additional mass while offering a compact footprint for bench or toolbox storage. The plastic construction balances low weight with sufficient rigidity to protect contents, enabling technicians to carry sets between site visits without bulky packaging. The space-saving profile also assists in organised inventory management, simplifying quick selection and return of individual weights during calibration routines. Practical benefits for workshops and calibration services For calibration laboratories, service teams and quality departments, a purpose-built case streamlines handling and reduces downtime caused by misplaced or contaminated weights. The product supports better operational consistency by keeping single calibration weights in order and immediately accessible, which translates into fewer interruptions during measurement tasks and a smoother calibration workflow. Contact Metav Werkzeuge for delivery from Emmerich, tailored advice or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 347 SKU: 347-009-400 GTIN: 4045761008625 Manufacturer: KERN Facts Weight: 0.02 kg Nominal values: 1 mg–500 mg HS code: 84239090 Special features Material: Plastic For: single calibration weights (button/compact) Class compatibility: E1–M2 Country of origin: DE FAQ Which nominal values fit in this case? The KERN 347-009-400 accommodates single weights with nominal values from 1 mg to 500 mg. Is the case suitable for weights with button or compact form? Yes, the enclosure is intended for button/compact designs and keeps each single weight separated for safe storage. Which accuracy classes are compatible with the case? The case is compatible with weights in accuracy classes E1 to M2 and is suitable for laboratory and workshop use. What material is the case made from and how heavy is it? The case is constructed from plastic and weighs approximately 0.02 kg, offering a lightweight yet protective solution. Manufacturer: KERN, Address: Germany, Contact: not specified

Benefit from robust plastic construction, compatibility with single nominal values 1 mg–500 mg and secure organisation for calibration weights of classes E1–M2, ensuring reliable storage and easy handling. Order the case directly via Metav Werkzeuge or ask our consultants if needed. KERN 347-009-400 Plastic Case for Single Calibration Weights – for 1 mg–500 mg, E1–M2 The KERN 347-009-400 is a compact plastic case designed to protect and organise single calibration weights for laboratories, service engineers and workshop calibration tasks. Compact plastic case for calibration weights Fits single weights from 1 mg to 500 mg Compatible with classes E1 to M2 Lightweight at approx. 0.02 kg Protects precision weights during storage and transport The case provides secure storage for individual calibration weights, reducing the risk of contamination and handling damage that can alter mass values. The internal layout is adapted for button/compact designs commonly used in calibration sets; this keeps each weight separated and stable during transport. By using a dedicated enclosure made from durable plastic, routine handling becomes more predictable and safer for sensitive measurement artefacts. Ensures compatibility with recognised accuracy classes Designed for nominal values from 1 mg–500 mg, the enclosure supports weights used across common accuracy classes E1–M2, which makes it suitable for laboratory checks and field calibration. For readers less familiar with classes: E1 and M2 denote standardised tolerance ranges used in legal and laboratory metrology; storing weights in the correct case helps maintain traceability and reduces the chance of cross-contamination that could compromise conformity checks. Lightweight, compact design for efficient workflow At roughly 0.02 kg, the case contributes negligible additional mass while offering a compact footprint for bench or toolbox storage. The plastic construction balances low weight with sufficient rigidity to protect contents, enabling technicians to carry sets between site visits without bulky packaging. The space-saving profile also assists in organised inventory management, simplifying quick selection and return of individual weights during calibration routines. Practical benefits for workshops and calibration services For calibration laboratories, service teams and quality departments, a purpose-built case streamlines handling and reduces downtime caused by misplaced or contaminated weights. The product supports better operational consistency by keeping single calibration weights in order and immediately accessible, which translates into fewer interruptions during measurement tasks and a smoother calibration workflow. Contact Metav Werkzeuge for delivery from Emmerich, tailored advice or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 347 SKU: 347-009-400 GTIN: 4045761008625 Manufacturer: KERN Facts Weight: 0.02 kg Nominal values: 1 mg–500 mg HS code: 84239090 Special features Material: Plastic For: single calibration weights (button/compact) Class compatibility: E1–M2 Country of origin: DE FAQ Which nominal values fit in this case? The KERN 347-009-400 accommodates single weights with nominal values from 1 mg to 500 mg. Is the case suitable for weights with button or compact form? Yes, the enclosure is intended for button/compact designs and keeps each single weight separated for safe storage. Which accuracy classes are compatible with the case? The case is compatible with weights in accuracy classes E1 to M2 and is suitable for laboratory and workshop use. What material is the case made from and how heavy is it? The case is constructed from plastic and weighs approximately 0.02 kg, offering a lightweight yet protective solution. Manufacturer: KERN, Address: Germany, Contact: not specified

Benefit from robust plastic construction, compatibility with single nominal values 1 mg–500 mg and secure organisation for calibration weights of classes E1–M2, ensuring reliable storage and easy handling. Order the case directly via Metav Werkzeuge or ask our consultants if needed. KERN 347-009-400 Plastic Case for Single Calibration Weights – for 1 mg–500 mg, E1–M2 The KERN 347-009-400 is a compact plastic case designed to protect and organise single calibration weights for laboratories, service engineers and workshop calibration tasks. Compact plastic case for calibration weights Fits single weights from 1 mg to 500 mg Compatible with classes E1 to M2 Lightweight at approx. 0.02 kg Protects precision weights during storage and transport The case provides secure storage for individual calibration weights, reducing the risk of contamination and handling damage that can alter mass values. The internal layout is adapted for button/compact designs commonly used in calibration sets; this keeps each weight separated and stable during transport. By using a dedicated enclosure made from durable plastic, routine handling becomes more predictable and safer for sensitive measurement artefacts. Ensures compatibility with recognised accuracy classes Designed for nominal values from 1 mg–500 mg, the enclosure supports weights used across common accuracy classes E1–M2, which makes it suitable for laboratory checks and field calibration. For readers less familiar with classes: E1 and M2 denote standardised tolerance ranges used in legal and laboratory metrology; storing weights in the correct case helps maintain traceability and reduces the chance of cross-contamination that could compromise conformity checks. Lightweight, compact design for efficient workflow At roughly 0.02 kg, the case contributes negligible additional mass while offering a compact footprint for bench or toolbox storage. The plastic construction balances low weight with sufficient rigidity to protect contents, enabling technicians to carry sets between site visits without bulky packaging. The space-saving profile also assists in organised inventory management, simplifying quick selection and return of individual weights during calibration routines. Practical benefits for workshops and calibration services For calibration laboratories, service teams and quality departments, a purpose-built case streamlines handling and reduces downtime caused by misplaced or contaminated weights. The product supports better operational consistency by keeping single calibration weights in order and immediately accessible, which translates into fewer interruptions during measurement tasks and a smoother calibration workflow. Contact Metav Werkzeuge for delivery from Emmerich, tailored advice or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 347 SKU: 347-009-400 GTIN: 4045761008625 Manufacturer: KERN Facts Weight: 0.02 kg Nominal values: 1 mg–500 mg HS code: 84239090 Special features Material: Plastic For: single calibration weights (button/compact) Class compatibility: E1–M2 Country of origin: DE FAQ Which nominal values fit in this case? The KERN 347-009-400 accommodates single weights with nominal values from 1 mg to 500 mg. Is the case suitable for weights with button or compact form? Yes, the enclosure is intended for button/compact designs and keeps each single weight separated for safe storage. Which accuracy classes are compatible with the case? The case is compatible with weights in accuracy classes E1 to M2 and is suitable for laboratory and workshop use. What material is the case made from and how heavy is it? The case is constructed from plastic and weighs approximately 0.02 kg, offering a lightweight yet protective solution. Manufacturer: KERN, Address: Germany, Contact: not specified

Take advantage of secure handling of small calibration weights, robust stainless steel construction and a compact 105 mm length for precise control; order the tweezers directly via Metav Werkzeuge or contact our consultants for application advice. Pinzette 315-243 — Precision tweezers by KERN, stainless steel, 105 mm The Pinzette 315-243 is a precision tweezer designed for the secure handling of small calibration weights in laboratories and workshop environments. Secure grip for micro calibration weights Stainless steel construction Length 105 mm for fine control Suitable for 1 mg – 200 g (E1 – M3) Secure handling for trace and routine calibration tasks The compact design delivers a secure grip for very small test weights, reducing the risk of slippage and accidental contact. Its dimensions, including the 105 mm length, allow for controlled, repeatable handling that supports efficient calibration workflows. This contributes to fewer handling errors and a more consistent weighing routine when working with weights from 1 mg – 200 g. Durable construction that keeps processes dependable Manufactured in stainless steel, the tool combines durability with low maintenance, ensuring longevity in daily metrology use. The robust construction helps maintain geometric stability and handling precision under repeated use, which supports reliable measurement results and reduces downtime for replacements. The design suits both laboratory benches and on-site calibration setups where space and dexterity matter. Practical compatibility and metrology clarity Designed for compatibility with standard calibration classifications, the tweezers are suitable for weights in classes E1 – M3, covering high-accuracy laboratory weights as well as routine workshop standards. For users less familiar with weight classes: these designations indicate recognised accuracy ranges used by calibration professionals and metrology services, ensuring the tool is appropriate for precise, standard-compliant handling. Confidence through expert supply and service Sourcing tools from a trusted partner simplifies procurement and post-sale support. Metav Werkzeuge stands for democratisation of precision, offering an extensive range of metrology supplies from its base in Emmerich. With a broad catalogue and a long-standing customer base, the emphasis is on dependable availability and a clear supply chain that supports uninterrupted calibration operations. Contact Metav Werkzeuge for tailored advice on the KERN 315-243 tweezers and to confirm suitability for specific weight classes — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance from our Emmerich team Technical data Article number: 315 SKU: 315-243 Manufacturer: KERN GTIN: 4045761067615 Length: 105 mm Net weight: 0.02 kg Facts Suitable weight range: 1 mg – 200 g Applicable weight classes: E1 – M3 Material: Stainless steel Special features Secure gripping geometry for small calibration weights Compact format for precise handling and repeatability Designed for laboratory and workshop use Rapid dispatch and broad metrology assortment available from supplier FAQ How small a weight can be handled with these tweezers? The Pinzette 315-243 from KERN is suitable for handling weights from 1 mg up to 200 g, covering the usual micro and small calibration weights used in precise weighing tasks. What material is the tool made from and why does that matter? The tweezers are made from stainless steel, giving corrosion resistance and dimensional stability that support consistent handling and long service life in metrology environments. Are these tweezers suitable for laboratory-grade calibration weights? Yes, the KERN 315-243 is specified for weights in classes E1 – M3, which includes high-accuracy laboratory weights as well as standard workshop classes, making it appropriate for professional calibration work. What are the physical dimensions and weight of the tweezers? The tweezers measure 105 mm in length and have a net weight of 0.02 kg, offering a compact tool that balances control with minimal contact force. Metav Werkzeuge, Emmerich am Rhein, Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930

Take advantage of secure handling of small calibration weights, robust stainless steel construction and a compact 105 mm length for precise control; order the tweezers directly via Metav Werkzeuge or contact our consultants for application advice. Pinzette 315-243 — Precision tweezers by KERN, stainless steel, 105 mm The Pinzette 315-243 is a precision tweezer designed for the secure handling of small calibration weights in laboratories and workshop environments. Secure grip for micro calibration weights Stainless steel construction Length 105 mm for fine control Suitable for 1 mg – 200 g (E1 – M3) Secure handling for trace and routine calibration tasks The compact design delivers a secure grip for very small test weights, reducing the risk of slippage and accidental contact. Its dimensions, including the 105 mm length, allow for controlled, repeatable handling that supports efficient calibration workflows. This contributes to fewer handling errors and a more consistent weighing routine when working with weights from 1 mg – 200 g. Durable construction that keeps processes dependable Manufactured in stainless steel, the tool combines durability with low maintenance, ensuring longevity in daily metrology use. The robust construction helps maintain geometric stability and handling precision under repeated use, which supports reliable measurement results and reduces downtime for replacements. The design suits both laboratory benches and on-site calibration setups where space and dexterity matter. Practical compatibility and metrology clarity Designed for compatibility with standard calibration classifications, the tweezers are suitable for weights in classes E1 – M3, covering high-accuracy laboratory weights as well as routine workshop standards. For users less familiar with weight classes: these designations indicate recognised accuracy ranges used by calibration professionals and metrology services, ensuring the tool is appropriate for precise, standard-compliant handling. Confidence through expert supply and service Sourcing tools from a trusted partner simplifies procurement and post-sale support. Metav Werkzeuge stands for democratisation of precision, offering an extensive range of metrology supplies from its base in Emmerich. With a broad catalogue and a long-standing customer base, the emphasis is on dependable availability and a clear supply chain that supports uninterrupted calibration operations. Contact Metav Werkzeuge for tailored advice on the KERN 315-243 tweezers and to confirm suitability for specific weight classes — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance from our Emmerich team Technical data Article number: 315 SKU: 315-243 Manufacturer: KERN GTIN: 4045761067615 Length: 105 mm Net weight: 0.02 kg Facts Suitable weight range: 1 mg – 200 g Applicable weight classes: E1 – M3 Material: Stainless steel Special features Secure gripping geometry for small calibration weights Compact format for precise handling and repeatability Designed for laboratory and workshop use Rapid dispatch and broad metrology assortment available from supplier FAQ How small a weight can be handled with these tweezers? The Pinzette 315-243 from KERN is suitable for handling weights from 1 mg up to 200 g, covering the usual micro and small calibration weights used in precise weighing tasks. What material is the tool made from and why does that matter? The tweezers are made from stainless steel, giving corrosion resistance and dimensional stability that support consistent handling and long service life in metrology environments. Are these tweezers suitable for laboratory-grade calibration weights? Yes, the KERN 315-243 is specified for weights in classes E1 – M3, which includes high-accuracy laboratory weights as well as standard workshop classes, making it appropriate for professional calibration work. What are the physical dimensions and weight of the tweezers? The tweezers measure 105 mm in length and have a net weight of 0.02 kg, offering a compact tool that balances control with minimal contact force. Metav Werkzeuge, Emmerich am Rhein, Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

High-grade OIML F1 accuracy and a 1 mg nominal value combine with a polished stainless-steel disc to deliver traceable results for microbalances; order this calibration weight directly via Metav Werkzeuge or consult our specialists for application and calibration advice. Milligram weight KERN 328-01 — 1 mg, OIML F1, polished stainless steel Milligram weight KERN 328-01 is a polished stainless-steel calibration disc for OIML F1 precision, designed for microbalances and high-accuracy laboratory use. OIML class F1 accuracy Nominal value 1 mg Tolerance 0.02 mg Polished stainless-steel disc Precise metrology: consistent measurement and traceability The OIML F1 classification and 0.02 mg tolerance establish a reliable baseline for laboratory-level calibration. This weight supports traceable calibration procedures on microbalances and precision balances, reducing measurement uncertainty in analytical and quality-control workflows. By specifying a 1 mg nominal value in a verified tolerance band, the component contributes to stable repeatability and simplified documentation for internal quality systems and audit trails. Compact design that protects measurement integrity A polished stainless-steel disc shape reduces surface contamination and eases gentle handling during calibration cycles. The compact form minimises air buoyancy effects at low masses and helps achieve reproducible placement on balance pans. Because of the very fine tolerance class, a protective case is recommended to prevent particulate contamination and mechanical damage during storage and transport. For formal traceability, a DAkkS calibration is advised; note that EU type approval for calibration weights will no longer be available after 30 November 2025, making accredited calibration an important step for long-term compliance. Practical applications and workshop confidence Engineered for laboratories, calibration services and precision workshops, the KERN 328-01 milligram weight supports verification tasks, method validation and routine balance checks. When integrated into a calibration schedule, the small mass helps maintain instrument performance and reduces downtime by catching drift early. The polished metal finish and disc form also make handling predictable during repeated use, contributing to consistent results and fewer retests — a direct efficiency gain for metrology teams and production control. For laboratory-grade traceability and reliable measurement, contact Metav Werkzeuge in Emmerich to request the KERN 328-01 milligram weight or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T328-A SKU: 328-01 GTIN: 4045761240315 Manufacturer: KERN Country of origin: CN Tariff code: 84239090 Core specifications Nominal value: 1 mg OIML class: F1 Tolerance: 0.02 mg Form: disc Materials & features Material: stainless steel, polished Shape: disc Recommended: protective case for precision Calibration recommendation: DAkkS calibration Regulatory note: EU type approval for weights ends 30 November 2025 FAQ How accurate is the milligram weight for laboratory calibration? The KERN 328-01 milligram weight meets OIML F1 with a tolerance of 0.02 mg, providing the accuracy required for microbalance verification and high-precision calibrations. Which instruments is this weight suitable for? This calibration disc is intended for microbalances and precision balances where a 1 mg reference mass is required for routine checks and method validation. Is accredited calibration recommended or included? An accredited DAkkS calibration is recommended for formal traceability; the KERN 328-01 is typically supplied without calibration, so customers should arrange calibration to meet their documentation needs. How should the weight be stored and handled? Store the polished stainless-steel disc in a protective case and handle with tweezers or gloves to avoid fingerprints and contamination; a case is recommended due to the very fine tolerance class. Will the EU type approval affect future use? From 30 November 2025 EU type approval for calibration weights will no longer be available; for most applications a DAkkS calibration provides the necessary traceability and is therefore advised for continued compliance. KERN — Origin: China — GTIN: 4045761240315

Take advantage of secure handling of small calibration weights, robust stainless steel construction and a compact 105 mm length for precise control; order the tweezers directly via Metav Werkzeuge or contact our consultants for application advice. Pinzette 315-243 — Precision tweezers by KERN, stainless steel, 105 mm The Pinzette 315-243 is a precision tweezer designed for the secure handling of small calibration weights in laboratories and workshop environments. Secure grip for micro calibration weights Stainless steel construction Length 105 mm for fine control Suitable for 1 mg – 200 g (E1 – M3) Secure handling for trace and routine calibration tasks The compact design delivers a secure grip for very small test weights, reducing the risk of slippage and accidental contact. Its dimensions, including the 105 mm length, allow for controlled, repeatable handling that supports efficient calibration workflows. This contributes to fewer handling errors and a more consistent weighing routine when working with weights from 1 mg – 200 g. Durable construction that keeps processes dependable Manufactured in stainless steel, the tool combines durability with low maintenance, ensuring longevity in daily metrology use. The robust construction helps maintain geometric stability and handling precision under repeated use, which supports reliable measurement results and reduces downtime for replacements. The design suits both laboratory benches and on-site calibration setups where space and dexterity matter. Practical compatibility and metrology clarity Designed for compatibility with standard calibration classifications, the tweezers are suitable for weights in classes E1 – M3, covering high-accuracy laboratory weights as well as routine workshop standards. For users less familiar with weight classes: these designations indicate recognised accuracy ranges used by calibration professionals and metrology services, ensuring the tool is appropriate for precise, standard-compliant handling. Confidence through expert supply and service Sourcing tools from a trusted partner simplifies procurement and post-sale support. Metav Werkzeuge stands for democratisation of precision, offering an extensive range of metrology supplies from its base in Emmerich. With a broad catalogue and a long-standing customer base, the emphasis is on dependable availability and a clear supply chain that supports uninterrupted calibration operations. Contact Metav Werkzeuge for tailored advice on the KERN 315-243 tweezers and to confirm suitability for specific weight classes — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance from our Emmerich team Technical data Article number: 315 SKU: 315-243 Manufacturer: KERN GTIN: 4045761067615 Length: 105 mm Net weight: 0.02 kg Facts Suitable weight range: 1 mg – 200 g Applicable weight classes: E1 – M3 Material: Stainless steel Special features Secure gripping geometry for small calibration weights Compact format for precise handling and repeatability Designed for laboratory and workshop use Rapid dispatch and broad metrology assortment available from supplier FAQ How small a weight can be handled with these tweezers? The Pinzette 315-243 from KERN is suitable for handling weights from 1 mg up to 200 g, covering the usual micro and small calibration weights used in precise weighing tasks. What material is the tool made from and why does that matter? The tweezers are made from stainless steel, giving corrosion resistance and dimensional stability that support consistent handling and long service life in metrology environments. Are these tweezers suitable for laboratory-grade calibration weights? Yes, the KERN 315-243 is specified for weights in classes E1 – M3, which includes high-accuracy laboratory weights as well as standard workshop classes, making it appropriate for professional calibration work. What are the physical dimensions and weight of the tweezers? The tweezers measure 105 mm in length and have a net weight of 0.02 kg, offering a compact tool that balances control with minimal contact force. Metav Werkzeuge, Emmerich am Rhein, Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930

Take advantage of a simple, reliable accessory that keeps calibration masses free from dust while preserving accuracy and prolonging service life. The combination of gentle bristles, low weight and practical handling ensures efficient routine maintenance of scales and weights. Order the KERN brush directly via Metav Werkzeuge or consult our advisors for further details. KERN 318-270 Dust Brush — compact brush for gentle cleaning of calibration weights The KERN 318-270 dust brush is a lightweight accessory designed to remove dust and particles from calibration weights and weighing surfaces in laboratories and workshops. Soft bristles for gentle cleaning Designed for calibration weights Lightweight and easy to handle Preserve measurement accuracy with gentle, targeted cleaning Regular cleaning of calibration masses prevents contamination that can alter mass values and affect the repeatability of results. The compact brush offers gentle bristles that remove dust without abrading surfaces or leaving residues, helping to maintain the precision of weights used in verification and calibration. For technicians and workshop teams, this reduces the frequency of recalibration and supports consistent measurement quality across production and quality-assurance processes. Practical handling for routine maintenance and quick interventions The accessory is intentionally lightweight and easy to manoeuvre during daily maintenance tasks, enabling swift removal of particles from weight stacks and pans without disassembly. Ergonomic handling minimises the risk of accidental knocks or slips near sensitive balances, while the brush design supports access to small grooves and recessed areas. This results in faster cleaning cycles and less downtime, contributing to a more efficient workflow in busy metrology environments. Reliability in supply and fit for professional environments The brush is supplied by a recognised manufacturer for weighing technology and suits workshops, service departments and calibration laboratories that require straightforward maintenance tools. Paired with Metav Werkzeuge’s role as a dependable distributor, this accessory supports a transparent supply chain and practical on-bench readiness. Investing in simple, purpose-built maintenance tools safeguards the performance of weighing equipment and complements broader quality-management measures. Contact Metav Werkzeuge to procure the KERN 318-270 dust brush for dependable maintenance of calibration weights or to request additional technical information Technical data Article number: 318 SKU: 318-270 Manufacturer: KERN GTIN: 4045761004146 Facts Weight: 0.01 kg Eclass: 21041109 Special features Suitable for cleaning calibration weights Rapid dispatch available via distributor FAQ How does this brush protect calibration accuracy? The brush removes dust and particles that can adhere to masses; using the KERN 318-270 dust brush helps maintain the declared mass values and stable measurement results. Is the brush suitable for all types of laboratory weights? The brush is intended for routine cleaning of calibration weights and standard weighing pans; compatibility with specialised mass geometries should be assessed case by case. Can the brush be used on balance pans without causing damage? Yes, the soft bristles are designed for gentle cleaning and avoid abrasive contact that could harm pans or plated surfaces. Manufacturer: KERN — Address: not specified — Contact: not specified