1 mg–500 g Calibration Weight Set, OIML F2, Knob Shape, Turned Stainless Steel, Aluminium Case - KERN
€600.00
Product information "1 mg–500 g Calibration Weight Set, OIML F2, Knob Shape, Turned Stainless Steel, Aluminium Case - KERN"
Benefit from OIML F2 accuracy, a wide 1 mg–500 g range and fine‑turned stainless steel masses protected in an aluminium case — order the set directly via Metav Werkzeuge or contact our consultants for tailored advice.
KERN 333-056 calibration weight set — OIML Class F2, 1 mg–500 g
The KERN 333-056 calibration weight set is a compact verification kit designed for precise balance checks and routine calibration tasks in workshops and laboratories.
- OIML Class F2 precision
- Range 1 mg–500 g
- Fine‑turned stainless steel weights
- Supplied in protective aluminium case
Consistent measurement that keeps processes running
The calibration kit delivers reproducible mass values across a 1 mg–500 g range, enabling reliable verification of analytical and precision balances. The specification OIML F2 denotes a recognised international tolerance class, helping to ensure that routine checks meet regulatory and quality‑management expectations. Using certified classes as a reference reduces the risk of process deviations and supports consistent product quality, so calibration intervals can be planned with confidence rather than guesswork.
Practical handling and robust storage for daily use
Weights are finished in fine‑turned stainless steel, providing corrosion resistance and a stable surface for accurate mass transfer. The knob form of larger masses simplifies handling during exchange, while the smallest milligram pieces are presented separately in a protective plastic inner case to prevent contamination and accidental damage. The entire set is housed in a sturdy aluminium case, which keeps components organised and reduces the time spent preparing instruments for verification, supporting faster workflow and lower downtime.
Clear applicability and procurement reliability
Built for industrial metrology and scales, this mass set covers verification tasks across workshops and laboratories where traceable and repeatable measurements are required. The design and materials support long‑term stability, reducing the need for frequent replacement. Sourcing through an established supplier also improves supply-chain reliability: Metav combines a broad product range with local stock handling from Emmerich, enabling prompt dispatch and consistent availability for production environments.
For verification tasks requiring OIML F2 accuracy, contact Metav Werkzeuge in Emmerich for expert guidance on the KERN 333-056 calibration weight set — info@metav-werkzeuge.com · +49 2822 7131930
Technical data
- Article number: 333-056
- Manufacturer: KERN
- GTIN: 4045761224537
- Origin: Germany
Facts
- Nominal range: 1 mg–500 g
- Total kit weight: 1.6 kg
- OIML class: F2
- Tariff number: 84239090
Special features
- Material: fine‑turned stainless steel
- Case material: aluminium
- Shape: knob form
- Milligram weights in separate plastic case
FAQ
What kind of balances is this set suitable for?
The KERN 333-056 calibration weight set (OIML F2) is suitable for verification and routine checks of laboratory and precision balances requiring F2‑class reference masses.
What does OIML F2 mean for measurement work?
OIML F2 designates an international tolerance class that indicates defined permissible deviations for reference masses; this helps maintain consistent verification standards and supports quality‑management routines.
How are the weights protected during storage and transport?
The kit is supplied in an aluminium case with the smallest milligram weights in a separate plastic inner case, reducing contamination and mechanical risk during handling and transit.
What materials are used for the masses and the case?
Masses are fine‑turned stainless steel and the outer storage case is aluminium, chosen for durability and corrosion resistance.
Where is the set manufactured?
The KERN 333-056 calibration weight set is of German origin.
Manufacturer: KERN · Distributor/location: Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · +49 2822 7131930
Zubehör
Take advantage of the combination of robust aluminium protection, precise compatibility with calibration classes and a lightweight, compact design to keep standard weight sets organised and safe. Order the case directly via Metav Werkzeuge or ask our consultants for tailored advice. Aluminium-protected Case KERN 313-050-600 — protective case for standard weight sets, 1 mg–500 g The Aluminium-protected Case is a lightweight, rigid transport and storage solution designed for standard calibration weight sets in laboratory and workshop environments. Aluminium-protected construction Suitable for 1 mg–500 g weight sets Compatible with classes E1–M1 Knob/compact format for efficient storage Built for reliable calibration workflows and secure transport The case’s aluminium-protected outer shell delivers mechanical resilience without excessive mass, providing secure transport for sensitive calibration masses. Designed for 1 mg–500 g weight sets and compatible with E1–M1 accuracy classes, the etui secures individual pieces in a knob/compact layout that minimises movement during handling. This reduces the risk of damage and the need for recalibration, supporting continuous, predictable operation in metrology chains. Organised layout that speeds up daily routines A compact internal arrangement keeps weights separated and accessible, enabling faster selection and return to storage during quality control cycles. The knob/compact configuration simplifies identification and handling of small masses while preserving their surfaces and tolerances. For workshops and laboratories that prioritise efficiency, the structured interior contributes to a smoother workflow and fewer interruptions for searches or cleaning. Robust protection without compromising portability With a total mass of approximately 0.7 kg, the case balances robust protection with easy handling. The aluminium construction shields contents from external mechanical impacts and environmental strain during transport. The rigid shell also serves as a practical protective barrier in shared storage areas, reducing the likelihood of accidental knocks affecting highly accurate weight sets. Suitable for standardised metrology environments Intended for standard weight sets in the knob/compact form and for use with E1–M1 classes, the case supports conformity and traceability requirements common in calibration labs and regulated production environments. The design focuses on preserving the geometric and surface integrity of masses used for calibration, contributing to reliable measurement chains and fewer unplanned calibrations. Contact Metav Werkzeuge in Emmerich for detailed advice on integrating the KERN 313-050-600 aluminium-protected case into calibration routines or to request further technical specifications: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 313 SKU: 313-050-600 Manufacturer: KERN Material: aluminium Weight: 0.7 kg Suitable for: 1 mg–500 g Classes: E1–M1 GTIN: 4045761222786 Country of origin: CN Tariff code: 84239090 Facts Range: 1 mg–500 g Mass (case): 0.7 kg Accuracy classes supported: E1–M1 GTIN numeric identifier: 4045761222786 Special features Aluminium-protected outer shell Knob/compact internal layout for weight sets Designed for standard weight sets Compact, portable format Suitable for laboratory and workshop use FAQ What weight range does the case accommodate? The case is designed for weight sets from 1 mg–500 g, suitable for compact or knob-style masses. Which calibration classes are compatible with this case? The KERN aluminium-protected case supports E1–M1 classes, making it suitable for high-precision laboratory and calibration environments. What material is the case made from? The outer shell is aluminium, chosen for its combination of rigidity and low weight. How heavy is the empty case? The case weighs approximately 0.7 kg, offering protection while remaining portable. Is the case suitable for workshop transport? Yes; the robust aluminium construction and compact layout protect masses during routine transport within workshops and between lab benches. Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271