10 kg Calibration Weight Block OIML F2 Stainless Steel Bead-Blasted, 160 mg Tolerance - KERN
€720.00
Product information "10 kg Calibration Weight Block OIML F2 Stainless Steel Bead-Blasted, 160 mg Tolerance - KERN"
Benefit from the combination of precise OIML F2 accuracy, a robust stainless‑steel block form and clear calibration guidance for consistent measurement results. Order the calibration weight directly via Metav Werkzeuge or consult our advisors for application-specific recommendations.
KERN 336-37 Calibration weight — 10 kg, OIML F2
The KERN 336-37 calibration weight is a single, block‑style reference mass for calibrating balances and scales in industrial and laboratory environments
- OIML class F2 accuracy, 160 mg tolerance
- Solid stainless‑steel block design
- Nominal value 10 kg for balance calibration
- Glass‑bead blasted finish for corrosion resistance
Accurate reference mass for repeatable calibration routines
The OIML F2 classification and a tolerance of 160 mg at the 10 kg nominal value provide a dependable baseline for mid‑range balance verification. As a calibrated reference mass, this block supports traceable calibration procedures and reduces measurement uncertainty during routine checks. The combination of class specification and measurable tolerance means fewer rechecks and improved process reliability when aligning production or laboratory weighing equipment.
Robust construction that withstands workshop handling
Manufactured from stainless steel with a glass‑bead blasted surface, the block delivers long‑term dimensional and mass stability under normal workshop conditions. The compact block format ensures stable placement on weighing pans and simplifies handling compared with cylindrical designs. The KERN 336-37 benefits from corrosion‑resistant finishing, which helps maintain surface integrity and mass constancy over time; for transport and storage, a protective case is strongly recommended to preserve accuracy.
Compliance and calibration advice for assured traceability
This single‑weight solution meets OIML requirements for a reliable calibration reference and is ideal for workflows where documented traceability matters. Note that EC first verification will no longer be possible from 30 November 2025; a DAkkS calibration is the advised alternative to secure official traceability for most applications. Selecting a DAkkS‑calibrated reference mass ensures conformity with statutory and quality‑management demands while supporting consistent measurement performance.
Contact Metav Werkzeuge in Emmerich for specification advice, DAkkS calibration options and accessory recommendations for the KERN 336-37 calibration weight
Technical Data
- Article number: 336
- SKU: 336-37
- Manufacturer: KERN
- GTIN: 4045761232815
- Tariff number: 84239090
Core technical data
- Nominal mass: 10 kg
- OIML class: F2
- Tolerance: 160 mg
- ECLASS: 32120103
Special features
- Block design
- Single weight
- Material: stainless steel, glass‑bead blasted
- Country of origin: Germany
- Recommendation: protective case; DAkkS calibration advised
FAQ
What accuracy class does this calibration weight comply with?
The KERN 336-37 calibration weight complies with OIML F2 and carries a tolerance of 160 mg for the 10 kg nominal mass, making it suitable as a reference mass in many industrial and laboratory calibration scenarios.
Is this weight suitable for both laboratory balances and industrial scales?
Yes, the 10 kg nominal value and F2 classification make the block appropriate for mid‑range laboratory balances and industrial weighing equipment where an F2 reference mass is specified.
Does the weight require special handling or storage?
Due to the high accuracy class, a protective case is recommended to prevent contamination and mechanical damage; Metav Werkzeuge offers suitable etuis in the accessories section for secure transport and storage.
Can this weight still receive EC first verification?
EC first verification will no longer be possible from 30 November 2025; for traceable conformity, a DAkkS calibration is recommended for the KERN 336-37.
Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
Zubehör
Take advantage of a robust combination of lightweight aluminium protection and a padded interior that secures sensitive block calibration weights, keeping calibration routines reliable and damage risk low. The case's compatibility with block weights up to 10 kg and calibration classes F1–M3 supports consistent handling and storage practices. Order the aluminium-protected case directly via Metav Werkzeuge or ask the consultants if needed. Aluminium-protected case 346-070-600 by KERN — padded protection for block weights up to 10 kg The Aluminium-protected case 346-070-600 is a padded transport and storage case designed for block calibration weights, intended for secure handling and protected storage in calibration labs and workshops. Aluminium shell for secure protection Padded interior for sensitive weights Designed for block weights up to 10 kg Compatible with calibration classes F1–M3 Secure storage that protects calibration investments The hard aluminium outer shell is engineered to shield precision weights from impacts and abrasion during transport and storage, while the padded interior prevents localised pressure and scratching. This combination reduces the risk of accidental damage that can compromise traceability and repeatability, ensuring that calibration assets remain within tolerance longer. The protective design therefore supports efficient quality control processes and lowers the likelihood of costly recalibration or replacement. Suitable for calibration classes F1–M3 and block-format weights Built specifically for block weights and validated for calibration classes F1–M3, the case meets common requirements in metrology and workshop calibration routines. Using a dedicated storage solution helps retain the mass standard's condition and simplifies conformity during routine checks. For teams managing reference standards or performing on-site verifications, the documented compatibility with these classes makes the case a pragmatic choice for maintaining measurement integrity. Lightweight, compact and ready for daily workflows Weighing just 1.35 kg, the transport case is easy to carry and stow, integrating seamlessly into mobile calibration kits or fixed laboratory storage. Its compact footprint preserves bench and storage space while the robust construction supports repeated handling. The practical format contributes to smooth logistics, keeping calibration artefacts organised and accessible so that measuring processes remain efficient and downtime is minimised. For reliable protection of block calibration weights, request the KERN aluminium-protected case 346-070-600 via Metav Werkzeuge — Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 346-070-600 Manufacturer: KERN GTIN: 4045761222885 Origin: CN Core specifications Weight: 1.35 kg Suitable for weights: up to 10 kg Calibration classes: F1–M3 Format: Block Materials & special features Material: Aluminium Interior: padded Design: for block weights Tariff number: 84239090 FAQ Is this case suitable for 10 kg block weights? Yes. The KERN aluminium-protected case 346-070-600 is designed for block weights up to 10 kg and accommodates the block format securely. Which calibration classes are supported? The case is specified for calibration classes F1–M3, making it suitable for a wide range of routine and laboratory-level mass standards. What material is the outer shell made from? The outer shell is made of aluminium, chosen for its combination of lightness and mechanical protection. Does the case include interior padding? Yes. The interior is padded, providing cushioning and a secure fit for sensitive calibration weights. What is the case weight and how portable is it? The empty case weighs 1.35 kg, offering a compact and portable solution for mobile calibration workflows. KERN — Origin: CN. Manufacturer contact not provided.