10 kg Precision Control Weight Three-Point Stainless Steel Fine-Turned, OIML F2, 160 mg Tolerance - KERN
€640.00
Product information "10 kg Precision Control Weight Three-Point Stainless Steel Fine-Turned, OIML F2, 160 mg Tolerance - KERN"
Benefit from the combination of OIML class F2 accuracy, a 10 kg nominal mass and a finely turned stainless steel finish to achieve repeatable calibration results; order the reference weight directly via Metav Werkzeuge or consult our specialists for accessory recommendations.
KERN 337-141 Calibration Weight – 10 kg, OIML class F2, finely turned stainless steel
A KERN 337-141 calibration weight designed for traceable verification of balances and scales in laboratories and workshops.
- OIML class F2 accuracy
- Nominal value 10 kg
- Finely turned stainless steel
- Stackable for compact storage
Precision that ensures traceable results
The calibration weight is specified as OIML class F2, with a nominal mass of 10 kg and a declared tolerance of 160 mg, making it suitable for precise verification tasks in quality control and laboratory environments. Class F2 denotes a defined maximum permissible error for reference masses used to check analytical and precision balances; this guarantees that adjustments and routine checks are performed against a test mass with measurable and certified limits. Using a weight with these specifications supports documented traceability and simplifies internal audit trails.
Robust finish for consistent handling
Manufactured from finely turned stainless steel, the reference mass resists corrosion and surface wear, which helps maintain its metrological characteristics over time. The smooth finish reduces contamination and makes careful handling straightforward during calibration runs. The product is also stackable, enabling compact storage and reduced risk of accidental damage when multiple weights are kept together. The combination of material quality and machining method contributes to stable repeatability during repeated verification procedures.
Practical recommendations for measurement workflows
For reliable long-term use, store the calibration weight in a protective case to avoid surface marks and minimise handling contamination; a case is particularly recommended for weights in the F2 class to preserve accuracy. When performing calibrations, allow the weight to reach room temperature and handle it with clean gloves or tweezers to avoid oil transfer. Integrating this reference mass into regular maintenance schedules reduces adjustment time for balances and supports consistent measurement results across production and inspection routines.
Select the KERN 337-141 for dependable verification and contact Metav Werkzeuge in Emmerich for accessory recommendations, secure supply and specialist advice (info@metav-werkzeuge.com | +49 2822 7131930)
Technical data
- Article number: 337
- SKU: 337-141
- GTIN: 4045761006577
- Manufacturer: KERN
- Country of origin: Germany
Facts
- Nominal value: 10 kg
- Tolerance (OIML F2): 160 mg
- Dimensions (cylinder): 136×132 mm
- Mass: 10 kg
Special features
- Material: finely turned stainless steel
- Product category: single calibration weight
- Product group: OIML F2
- Stackable
- Harmonised System number: 84239090
FAQ
What level of accuracy does this reference weight provide?
The KERN 337-141 is classified as OIML class F2 with a tolerance of 160 mg, making it suitable for verification of precision and laboratory balances where class F2 is required.
Is the weight suitable for regular calibration routines in a workshop environment?
Yes. The 10 kg calibration weight is intended as a control mass for routine checks and adjustments of balances in workshops and laboratories, offering repeatable results due to its material and machining.
How should the calibration weight be stored to preserve accuracy?
A protective case is recommended for the KERN 337-141 to avoid surface damage and contamination; store in a dry, temperature-stable environment and handle with gloves or tweezers.
What is the material and why does it matter?
The weight is made from finely turned stainless steel, which ensures corrosion resistance and a stable surface finish—both important for preserving metrological properties over time.
Can multiple weights be stored together safely?
Yes. The design is stackable, which allows compact storage of multiple weights while helping to protect surfaces when combined with suitable protective cases.
Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271
Zubehör
Combine robust, compact design with quick availability and precise fit for a 10 kg control weight; the wooden construction ensures secure handling and easy storage. Order the case directly via Metav Werkzeuge or consult our specialists for application advice. Holz-Etui KERN 337-141-200 — Wooden case for 10 kg control weight, unpadded the Holz-Etui KERN 337-141-200 is a wooden storage case designed to accommodate a single 10 kg control weight, offering compact protection for calibration and testing tasks Wooden case for 10 kg control weight Unpadded interior for custom protection Suitable for F2 and M1 control weights Secure storage and clear protection for calibration weights The wooden case is tailored to the safe storage of a 10 kg calibration or control weight, reducing the risk of surface damage during handling and transport. The unpadded interior offers a straightforward solution for workshops that prefer to apply bespoke padding or use the raw cavity for a snug fit. Built from solid wood, the case provides a stable shell that resists dents and deformation, while the compact form keeps the mass centrally supported, which helps to maintain the integrity of the control weight between uses and calibrations. Practical benefits for workshop workflows and logistics Designed for single-weight storage, the case supports fast, repeatable handling routines in metrology and maintenance environments. At a case weight of 3.1 kg, the container remains easy to move and stack, simplifying inventory management and transport within the workshop. The straightforward construction reduces maintenance needs and allows immediate use on site or in transit. Where traceable measurement work is required, this storage solution integrates neatly into calibration procedures and workshop workflows, supporting efficient turnaround and minimal handling complexity. Durable materials and responsible sourcing for everyday use Constructed from quality wood, the case combines durability with a tactile, repairable surface that is straightforward to maintain. The plain interior and robust exterior make the product suitable for repeated use in industrial settings where tools and standards are stored close to hand. The case is produced under the KERN brand, known for precision equipment, and is supplied via a distribution network that emphasises reliable fulfilment. This combination of durability and availability supports long-term operational reliability without adding unnecessary complexity to storage routines. For tailored advice on the KERN wooden case and to secure reliable supply from Metav Werkzeuge in Emmerich, contact our consultants for an assessment of suitability and delivery options Technical data Article number: 337 SKU: 337-141-200 GTIN: 4045761150676 Manufacturer: KERN Country of origin: DE Facts Case weight: 3.1 kg Intended for nominal value: 10 kg Tariff number: 84239090 ECLASS: 21100103 Special features Material: Wood Interior: Unpadded Design: For single control/test weights Product group: Wooden case for test weights FAQ Is this case suitable for a 10 kg calibration weight? The case is intended for a 10 kg nominal control weight and provides rigid protection for calibration and storage tasks. Does the case come padded? The interior is unpadded; the design allows bespoke padding to be added if a softer internal lining is required. Which accuracy classes is the case intended for? The wooden case is supplied for use with control weights in classes F2 and M1, matching common workshop calibration needs. What is the weight of the empty case? The empty case weighs approximately 3.1 kg, which supports easy handling and stacking in workshop environments. KERN — Germany
Take advantage of gentle, cotton handling and reliable contamination protection to extend the service life of precision weights; order directly from Metav Werkzeuge or contact our consultants for tailored advice. Gloves KERN 317-280 — Cotton gloves for protecting test weights up to 2 kg The Gloves KERN 317-280 are designed to protect test weights and precision masses from finger grease and moisture during everyday handling in workshops and calibration labs. Cotton construction for gentle handling Protects test weights from finger grease Suitable for test weights up to 2 kg Lightweight, reusable pair for workshop use Preserve measurement accuracy with clean handling Handling delicate masses without contamination helps to maintain precision and reduces the need for frequent recalibration. The KERN cotton gloves provide an effective barrier against finger grease and light moisture, keeping surfaces free of oils that can alter measured mass. By preventing direct contact, the gloves contribute to consistent readings and minimise the risk of measurement drift, supporting reliable quality control in routine metrology tasks. Practical protection for everyday workshop routines Lightweight and easy to store, this pair is tailored for straightforward use in production and service environments. The simple design allows quick application while handling small test weights, helping to maintain workflow speed without compromising care. Suitable for masses up to 2 kg, the gloves enable safe manipulation of common calibration weights, combining protection with operational convenience to keep processes efficient and repeatable. Why cotton is the right material for delicate tools Cotton fibres offer a soft, absorbent contact surface that decreases the transfer of oils and residues onto sensitive metal surfaces. The natural fabric reduces abrasion risk compared with harsher materials, providing gentle handling that preserves finish and mass integrity. At an almost negligible net weight, the gloves do not affect the handling ergonomics of small weights but do increase confidence in routine handling and storage practices. Contact Metav Werkzeuge for personalised advice or to secure the KERN cotton gloves from our Emmerich stock; our team will assist with product details and suitability for specific calibration needs. Technical data Article number: 317 SKU: 317-280 Manufacturer: KERN Facts Net weight: 0.01 kg Suitable for test weights up to 2 kg GTIN: 4045761003866 Special features Material: cotton Protects test weights from finger grease and moisture Supplied as one pair Segment: Test weight accessories FAQ Are these gloves suitable for precision balances? The KERN 317-280 gloves are intended to protect precision masses and are suitable for handling small test weights used with precision balances. How do the gloves protect test weights? The cotton fibres of the gloves reduce oil and moisture transfer, helping to keep the surface of test weights clean and preserving measurement accuracy. Can the gloves be used for weights above 2 kg? The gloves are specified as ideal for handling test weights up to 2 kg; heavier items may require different handling methods or protective equipment. What material are the gloves made from? The gloves are made from cotton, chosen for its gentle contact and absorbent properties. Is the KERN 317-280 pair reusable? The gloves are designed for repeated use in workshop routines, offering lightweight, practical protection for daily handling of test weights. Metav Werkzeuge — Emmerich am Rhein, Germany · eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
Take advantage of gentle, cotton handling and reliable contamination protection to extend the service life of precision weights; order directly from Metav Werkzeuge or contact our consultants for tailored advice. Gloves KERN 317-280 — Cotton gloves for protecting test weights up to 2 kg The Gloves KERN 317-280 are designed to protect test weights and precision masses from finger grease and moisture during everyday handling in workshops and calibration labs. Cotton construction for gentle handling Protects test weights from finger grease Suitable for test weights up to 2 kg Lightweight, reusable pair for workshop use Preserve measurement accuracy with clean handling Handling delicate masses without contamination helps to maintain precision and reduces the need for frequent recalibration. The KERN cotton gloves provide an effective barrier against finger grease and light moisture, keeping surfaces free of oils that can alter measured mass. By preventing direct contact, the gloves contribute to consistent readings and minimise the risk of measurement drift, supporting reliable quality control in routine metrology tasks. Practical protection for everyday workshop routines Lightweight and easy to store, this pair is tailored for straightforward use in production and service environments. The simple design allows quick application while handling small test weights, helping to maintain workflow speed without compromising care. Suitable for masses up to 2 kg, the gloves enable safe manipulation of common calibration weights, combining protection with operational convenience to keep processes efficient and repeatable. Why cotton is the right material for delicate tools Cotton fibres offer a soft, absorbent contact surface that decreases the transfer of oils and residues onto sensitive metal surfaces. The natural fabric reduces abrasion risk compared with harsher materials, providing gentle handling that preserves finish and mass integrity. At an almost negligible net weight, the gloves do not affect the handling ergonomics of small weights but do increase confidence in routine handling and storage practices. Contact Metav Werkzeuge for personalised advice or to secure the KERN cotton gloves from our Emmerich stock; our team will assist with product details and suitability for specific calibration needs. Technical data Article number: 317 SKU: 317-280 Manufacturer: KERN Facts Net weight: 0.01 kg Suitable for test weights up to 2 kg GTIN: 4045761003866 Special features Material: cotton Protects test weights from finger grease and moisture Supplied as one pair Segment: Test weight accessories FAQ Are these gloves suitable for precision balances? The KERN 317-280 gloves are intended to protect precision masses and are suitable for handling small test weights used with precision balances. How do the gloves protect test weights? The cotton fibres of the gloves reduce oil and moisture transfer, helping to keep the surface of test weights clean and preserving measurement accuracy. Can the gloves be used for weights above 2 kg? The gloves are specified as ideal for handling test weights up to 2 kg; heavier items may require different handling methods or protective equipment. What material are the gloves made from? The gloves are made from cotton, chosen for its gentle contact and absorbent properties. Is the KERN 317-280 pair reusable? The gloves are designed for repeated use in workshop routines, offering lightweight, practical protection for daily handling of test weights. Metav Werkzeuge — Emmerich am Rhein, Germany · eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271