10 kg Calibration Weight Block Stainless Steel, OIML Class M1, 500 mg Tolerance - KERN

Take advantage of gentle, cotton handling and reliable contamination protection to extend the service life of precision weights; order directly from Metav Werkzeuge or contact our consultants for tailored advice. Gloves KERN 317-280 — Cotton gloves for protecting test weights up to 2 kg The Gloves KERN 317-280 are designed to protect test weights and precision masses from finger grease and moisture during everyday handling in workshops and calibration labs. Cotton construction for gentle handling Protects test weights from finger grease Suitable for test weights up to 2 kg Lightweight, reusable pair for workshop use Preserve measurement accuracy with clean handling Handling delicate masses without contamination helps to maintain precision and reduces the need for frequent recalibration. The KERN cotton gloves provide an effective barrier against finger grease and light moisture, keeping surfaces free of oils that can alter measured mass. By preventing direct contact, the gloves contribute to consistent readings and minimise the risk of measurement drift, supporting reliable quality control in routine metrology tasks. Practical protection for everyday workshop routines Lightweight and easy to store, this pair is tailored for straightforward use in production and service environments. The simple design allows quick application while handling small test weights, helping to maintain workflow speed without compromising care. Suitable for masses up to 2 kg, the gloves enable safe manipulation of common calibration weights, combining protection with operational convenience to keep processes efficient and repeatable. Why cotton is the right material for delicate tools Cotton fibres offer a soft, absorbent contact surface that decreases the transfer of oils and residues onto sensitive metal surfaces. The natural fabric reduces abrasion risk compared with harsher materials, providing gentle handling that preserves finish and mass integrity. At an almost negligible net weight, the gloves do not affect the handling ergonomics of small weights but do increase confidence in routine handling and storage practices. Contact Metav Werkzeuge for personalised advice or to secure the KERN cotton gloves from our Emmerich stock; our team will assist with product details and suitability for specific calibration needs. Technical data Article number: 317 SKU: 317-280 Manufacturer: KERN Facts Net weight: 0.01 kg Suitable for test weights up to 2 kg GTIN: 4045761003866 Special features Material: cotton Protects test weights from finger grease and moisture Supplied as one pair Segment: Test weight accessories FAQ Are these gloves suitable for precision balances? The KERN 317-280 gloves are intended to protect precision masses and are suitable for handling small test weights used with precision balances. How do the gloves protect test weights? The cotton fibres of the gloves reduce oil and moisture transfer, helping to keep the surface of test weights clean and preserving measurement accuracy. Can the gloves be used for weights above 2 kg? The gloves are specified as ideal for handling test weights up to 2 kg; heavier items may require different handling methods or protective equipment. What material are the gloves made from? The gloves are made from cotton, chosen for its gentle contact and absorbent properties. Is the KERN 317-280 pair reusable? The gloves are designed for repeated use in workshop routines, offering lightweight, practical protection for daily handling of test weights. Metav Werkzeuge — Emmerich am Rhein, Germany · eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271

Preserve measurement integrity by using a lightweight leather/cotton glove pair that shields calibration weights from finger oils and moisture, extending their service life and reducing cleaning intervals; order directly via Metav Werkzeuge or consult our specialists for application advice. KERN 317-290 gloves — Leather/Cotton protection for calibration weights The KERN 317-290 gloves are designed to protect calibration weights from contamination and moisture during handling in workshops and laboratories Leather-lined cotton construction for gentle handling Protects weights from finger oils and moisture Suitable for calibration weights from 2 kg Lightweight design, compact storage Preserve calibration accuracy with gentle handling Handling mass standards without protection risks surface contamination that affects repeatability and traceability. The KERN 317-290 glove pair combines leather/cotton materials to provide a soft, low-abrasion contact surface that significantly reduces transfer of finger oils and deposits. This gentle barrier supports consistent readings by limiting the need for frequent cleaning, which in turn helps to maintain calibration schedules and reduces downtime for precision equipment. Streamline daily workflows in workshop and lab A reliable handling solution simplifies routine procedures: the gloves are optimised for daily handling of weights and are particularly suited to masses from 2 kg upward, where manual manipulation is common. Their lightweight construction allows extended wear without fatigue, improving operator comfort and process throughput. By preventing contaminant transfer, the gloves help to keep weighing stations operational and reduce the frequency of weight surface maintenance. Durable solution from a trusted precision partner Selecting accessories from established manufacturers contributes to consistent quality across the supply chain. These gloves are supplied by KERN and distributed via Metav Werkzeuge, whose service model acts as a quality filter for European workshops. The combination of robust materials and proven distribution practices supports long-term reliability and a steady supply of precision accessories for industry and trade. For protected handling of calibration weights, choose the KERN 317-290 leather/cotton gloves — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 317 SKU: 317-290 GTIN: 4045761134300 Manufacturer: KERN Facts Weight: 0.01 kg Suitable for calibration weights from 2 kg eClass: 40011201 Special features Material: leather/cotton Protects calibration weights from finger oils and moisture Contents: 1 pair Intended use: handling calibration weights in workshop or laboratory FAQ Are these gloves suitable for all calibration weight sizes? The gloves are intended for use with calibration weights from 2 kg and above; for smaller masses alternative handling tools may be recommended. How do the gloves protect the weights? The leather/cotton construction of the KERN 317-290 minimises direct skin contact and reduces transfer of oils and moisture that can alter weight surfaces. Can the gloves be cleaned or reused? The gloves are designed for repeated use; follow manufacturer care instructions to maintain material performance and surface cleanliness. Will using the gloves reduce the need to clean weights? Regular use of protective gloves lowers contamination rates and consequently reduces the frequency of weight cleaning and maintenance. Who supplies these gloves through Metav? The gloves are supplied by KERN and distributed via Metav Werkzeuge (SKU 317-290) as part of precision handling accessories. KERN — address and direct contact details not provided by the supplier

Take advantage of a robust combination of lightweight aluminium protection and a padded interior that secures sensitive block calibration weights, keeping calibration routines reliable and damage risk low. The case's compatibility with block weights up to 10 kg and calibration classes F1–M3 supports consistent handling and storage practices. Order the aluminium-protected case directly via Metav Werkzeuge or ask the consultants if needed. Aluminium-protected case 346-070-600 by KERN — padded protection for block weights up to 10 kg The Aluminium-protected case 346-070-600 is a padded transport and storage case designed for block calibration weights, intended for secure handling and protected storage in calibration labs and workshops. Aluminium shell for secure protection Padded interior for sensitive weights Designed for block weights up to 10 kg Compatible with calibration classes F1–M3 Secure storage that protects calibration investments The hard aluminium outer shell is engineered to shield precision weights from impacts and abrasion during transport and storage, while the padded interior prevents localised pressure and scratching. This combination reduces the risk of accidental damage that can compromise traceability and repeatability, ensuring that calibration assets remain within tolerance longer. The protective design therefore supports efficient quality control processes and lowers the likelihood of costly recalibration or replacement. Suitable for calibration classes F1–M3 and block-format weights Built specifically for block weights and validated for calibration classes F1–M3, the case meets common requirements in metrology and workshop calibration routines. Using a dedicated storage solution helps retain the mass standard's condition and simplifies conformity during routine checks. For teams managing reference standards or performing on-site verifications, the documented compatibility with these classes makes the case a pragmatic choice for maintaining measurement integrity. Lightweight, compact and ready for daily workflows Weighing just 1.35 kg, the transport case is easy to carry and stow, integrating seamlessly into mobile calibration kits or fixed laboratory storage. Its compact footprint preserves bench and storage space while the robust construction supports repeated handling. The practical format contributes to smooth logistics, keeping calibration artefacts organised and accessible so that measuring processes remain efficient and downtime is minimised. For reliable protection of block calibration weights, request the KERN aluminium-protected case 346-070-600 via Metav Werkzeuge — Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 346-070-600 Manufacturer: KERN GTIN: 4045761222885 Origin: CN Core specifications Weight: 1.35 kg Suitable for weights: up to 10 kg Calibration classes: F1–M3 Format: Block Materials & special features Material: Aluminium Interior: padded Design: for block weights Tariff number: 84239090 FAQ Is this case suitable for 10 kg block weights? Yes. The KERN aluminium-protected case 346-070-600 is designed for block weights up to 10 kg and accommodates the block format securely. Which calibration classes are supported? The case is specified for calibration classes F1–M3, making it suitable for a wide range of routine and laboratory-level mass standards. What material is the outer shell made from? The outer shell is made of aluminium, chosen for its combination of lightness and mechanical protection. Does the case include interior padding? Yes. The interior is padded, providing cushioning and a secure fit for sensitive calibration weights. What is the case weight and how portable is it? The empty case weighs 1.35 kg, offering a compact and portable solution for mobile calibration workflows. KERN — Origin: CN. Manufacturer contact not provided.