1 g Precision Calibration Weight Button Stainless Steel Fine-Turned, OIML M1 1 mg Tolerance - KERN

Take advantage of secure handling of small calibration weights, robust stainless steel construction and a compact 105 mm length for precise control; order the tweezers directly via Metav Werkzeuge or contact our consultants for application advice. Pinzette 315-243 — Precision tweezers by KERN, stainless steel, 105 mm The Pinzette 315-243 is a precision tweezer designed for the secure handling of small calibration weights in laboratories and workshop environments. Secure grip for micro calibration weights Stainless steel construction Length 105 mm for fine control Suitable for 1 mg – 200 g (E1 – M3) Secure handling for trace and routine calibration tasks The compact design delivers a secure grip for very small test weights, reducing the risk of slippage and accidental contact. Its dimensions, including the 105 mm length, allow for controlled, repeatable handling that supports efficient calibration workflows. This contributes to fewer handling errors and a more consistent weighing routine when working with weights from 1 mg – 200 g. Durable construction that keeps processes dependable Manufactured in stainless steel, the tool combines durability with low maintenance, ensuring longevity in daily metrology use. The robust construction helps maintain geometric stability and handling precision under repeated use, which supports reliable measurement results and reduces downtime for replacements. The design suits both laboratory benches and on-site calibration setups where space and dexterity matter. Practical compatibility and metrology clarity Designed for compatibility with standard calibration classifications, the tweezers are suitable for weights in classes E1 – M3, covering high-accuracy laboratory weights as well as routine workshop standards. For users less familiar with weight classes: these designations indicate recognised accuracy ranges used by calibration professionals and metrology services, ensuring the tool is appropriate for precise, standard-compliant handling. Confidence through expert supply and service Sourcing tools from a trusted partner simplifies procurement and post-sale support. Metav Werkzeuge stands for democratisation of precision, offering an extensive range of metrology supplies from its base in Emmerich. With a broad catalogue and a long-standing customer base, the emphasis is on dependable availability and a clear supply chain that supports uninterrupted calibration operations. Contact Metav Werkzeuge for tailored advice on the KERN 315-243 tweezers and to confirm suitability for specific weight classes — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance from our Emmerich team Technical data Article number: 315 SKU: 315-243 Manufacturer: KERN GTIN: 4045761067615 Length: 105 mm Net weight: 0.02 kg Facts Suitable weight range: 1 mg – 200 g Applicable weight classes: E1 – M3 Material: Stainless steel Special features Secure gripping geometry for small calibration weights Compact format for precise handling and repeatability Designed for laboratory and workshop use Rapid dispatch and broad metrology assortment available from supplier FAQ How small a weight can be handled with these tweezers? The Pinzette 315-243 from KERN is suitable for handling weights from 1 mg up to 200 g, covering the usual micro and small calibration weights used in precise weighing tasks. What material is the tool made from and why does that matter? The tweezers are made from stainless steel, giving corrosion resistance and dimensional stability that support consistent handling and long service life in metrology environments. Are these tweezers suitable for laboratory-grade calibration weights? Yes, the KERN 315-243 is specified for weights in classes E1 – M3, which includes high-accuracy laboratory weights as well as standard workshop classes, making it appropriate for professional calibration work. What are the physical dimensions and weight of the tweezers? The tweezers measure 105 mm in length and have a net weight of 0.02 kg, offering a compact tool that balances control with minimal contact force. Metav Werkzeuge, Emmerich am Rhein, Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930

Benefit from a compact, durable plastic case that protects single calibration weights from 1 g to 2 g to accuracy class E2, ensuring organised storage and safe handling in the workshop or laboratory; order directly via Metav Werkzeuge or consult our team for application advice. KERN 317-020-400 Plastic case — protective storage for single calibration weights, 1 g–2 g (class E2) KERN 317-020-400 is a robust plastic enclosure designed for the safe storage and transport of single calibration weights in the compact/button format, optimised for precision environments. Protective plastic case for single weights Fits compact/button weights 1 g–2 g Suitable for accuracy class E2 Lightweight 20 g protective storage Secure storage that preserves calibration integrity The plastic case provides a compact and stable environment for individual calibration weights, reducing handling-related errors and contamination. Built for single-weight storage in the button/compact configuration, the enclosure keeps each weight separated and secured to prevent surface damage that could affect measurement accuracy. The case’s durable plastic construction offers a balance of impact resistance and low weight, making it suitable for bench storage and controlled transport within calibration workflows. By maintaining the condition of the weights, the housing supports consistent measurement performance for instruments that rely on small nominal masses. Integrates cleanly into calibration and metrology workflows Designed for laboratories and service technicians working with fine masses, the case streamlines organisation and inventory control for weights in the 1 g–2 g range and E2 tolerance class. The compact footprint enables efficient use of bench space and simple stacking in storage cabinets or calibration kits. Clear labelling opportunities and the standardised form factor of the enclosure aid traceability in routine checks and recalibration cycles. The practical design helps to minimise downtime: weights remain accessible and test-ready, supporting faster setup and repeatable measurement procedures in quality-critical environments. Practical advantages for everyday workshop and service use For technicians who move calibration sets between workstations, the lightweight and resilient housing reduces the risk of accidental damage while remaining easy to carry. The case’s construction is suited to regular handling and provides basic protection against dust and light mechanical impact. As part of a broader supply strategy, such enclosures help to centralise equipment storage and improve the organisation of small nominal masses, contributing to dependable process control in production, service, and inspection routines. The product’s compatibility with standard compact/button masses simplifies integration with existing calibration kits and holders. Choose the KERN 317-020-400 Plastic case for reliable E2 storage — contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply via info@metav-werkzeuge.com and +49 2822 7131930 Technical data SKU: 317-020-400 Manufacturer: KERN GTIN: 4045761081116 Origin: Germany Material: Plastic Facts Nominal values: 1 g–2 g Accuracy class: E2 Net weight: 0.02 kg Tariff code: 84239090 Special features Case for single calibration weights (button/compact) Product category: Calibration weight cases & etuis Product group: Plastic case for single weights FAQ What sizes of weights fit this case? The case is made for single calibration weights with nominal values from 1 g to 2 g in the compact/button format. Is the housing suitable for accuracy class E2 weights? Yes, the enclosure is specified for storage of weights to accuracy class E2, helping to preserve their condition between uses. Which material is used for the case and what benefits does it provide? The case is manufactured from durable plastic, offering lightweight protection against dust and minor impacts while remaining easy to handle. Can the case be integrated into existing calibration kits? The compact/button form factor is compatible with standard kits and supports organised storage in calibration workflows. Does the product include individual compartments for each weight? The case is designed for single-weight storage in the button/compact format to keep masses separated and protected. KERN — Germany

Take advantage of a compact, KERN-specified storage solution that protects individual calibration weights and keeps them organised for routine use; the combination of robust plastic construction, compatibility with 1 g–5 g knob/compact weights and straightforward handling ensures reliable daily workflow — order directly via Metav Werkzeuge or consult our team for product matching. Plastic case 347-030-400 — for individual calibration weights, 1 g–5 g, classes F1–M3 (KERN) The Plastic case 347-030-400 is a compact storage and transport solution for individual calibration weights, designed to keep knob/compact weights organised and protected in laboratories, workshops and service environments. Compact plastic case for individual weights Fits knob/compact weights 1 g–5 g Suitable for calibration classes F1–M3 Durable, lightweight storage solution Protects accuracy by preventing contamination and wear The case offers a secure place to store calibration weights so that surface contamination and handling damage are minimised, which in turn preserves measurement accuracy over time. By keeping knob and compact weights separated and secured, the storage solution reduces the need for frequent recalibration and helps maintain compliance with routine test intervals. This protective function is particularly relevant when handling sensitive classes such as F1–M3, where surface condition has a direct effect on measurement results. Lightweight plastic design for easy handling and transport Constructed from plastic, the case is both lightweight and durable, making movement between benches or job sites straightforward without adding significant bulk. Weighing approximately 0.02 kg, it supports convenient handling while providing a firm housing for individual pieces. The material choice balances protection with portability, offering a practical alternative to heavier metal cases where the primary requirement is safe short-term storage rather than long-term extreme environmental protection. Organises calibration workflows for faster selection and traceability A dedicated case reduces search times and streamlines the selection of the correct nominal weight during routine checks, improving operational efficiency in workshops and service departments. Clear organisation contributes to faster test cycles and less downtime, which in aggregate supports productivity goals. Where traceability is required, consistent storage in a defined case helps operators maintain an orderly inventory and reduces human error during weigh-ins and calibrations. Compatible with industry practice and a recognisable brand Designed for use with knob/compact weights in the 1 g–5 g range and suitable for classes F1–M3, the case aligns with common metrology practice and complements existing weight sets from established manufacturers. The KERN designation signals compatibility with professional weighing equipment; origin details indicate manufacturing standards consistent with European metrology supplies. As a simple yet effective accessory, the case supports routine maintenance of weights without introducing complex handling procedures. Contact Metav Werkzeuge for tailored advice on integrating the KERN plastic case 347-030-400 into workshop or laboratory inventory — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise product matching and availability Technical Data Article number: 347-030-400 SKU: 347-030-400 GTIN: 4045761008663 Manufacturer: KERN Origin country: DE Material: Kunststoff Facts Weight (case): 0.02 kg ECLASS: 21100103 Tariff number: 84239090 Special features Case for individual weights Suitable for nominal values 1 g–5 g For calibration classes F1–M3 Designed for knob/compact weight form Category: Prüfgewichte (Waagen > Prüfgewichte) FAQ What weights fit this case? The Plastic case 347-030-400 fits individual knob/compact calibration weights with nominal values from 1 g–5 g, making it suitable for small weight sets. Is the case suitable for F1 and M3 class weights? Yes, the case is specified for use with weights in classes F1–M3, supporting common laboratory and workshop calibration needs. What material is the case made from and is it durable? The case is made of plastic, chosen to be both durable and lightweight, providing protection against contamination and handling wear during normal use. Can this case be used with weight sets from other manufacturers? The case is designed for knob/compact weight formats and will accommodate compatible 1 g–5 g pieces from other manufacturers if the form factor matches. Who supplies this product and how can it be obtained? This item is supplied by KERN and is available through Metav Werkzeuge; consult Metav for availability and compatibility advice Manufacturer: KERN · Address: Germany · Contact: info@metav-werkzeuge.com / +49 2822 7131930

Take advantage of a compact, KERN-specified storage solution that protects individual calibration weights and keeps them organised for routine use; the combination of robust plastic construction, compatibility with 1 g–5 g knob/compact weights and straightforward handling ensures reliable daily workflow — order directly via Metav Werkzeuge or consult our team for product matching. Plastic case 347-030-400 — for individual calibration weights, 1 g–5 g, classes F1–M3 (KERN) The Plastic case 347-030-400 is a compact storage and transport solution for individual calibration weights, designed to keep knob/compact weights organised and protected in laboratories, workshops and service environments. Compact plastic case for individual weights Fits knob/compact weights 1 g–5 g Suitable for calibration classes F1–M3 Durable, lightweight storage solution Protects accuracy by preventing contamination and wear The case offers a secure place to store calibration weights so that surface contamination and handling damage are minimised, which in turn preserves measurement accuracy over time. By keeping knob and compact weights separated and secured, the storage solution reduces the need for frequent recalibration and helps maintain compliance with routine test intervals. This protective function is particularly relevant when handling sensitive classes such as F1–M3, where surface condition has a direct effect on measurement results. Lightweight plastic design for easy handling and transport Constructed from plastic, the case is both lightweight and durable, making movement between benches or job sites straightforward without adding significant bulk. Weighing approximately 0.02 kg, it supports convenient handling while providing a firm housing for individual pieces. The material choice balances protection with portability, offering a practical alternative to heavier metal cases where the primary requirement is safe short-term storage rather than long-term extreme environmental protection. Organises calibration workflows for faster selection and traceability A dedicated case reduces search times and streamlines the selection of the correct nominal weight during routine checks, improving operational efficiency in workshops and service departments. Clear organisation contributes to faster test cycles and less downtime, which in aggregate supports productivity goals. Where traceability is required, consistent storage in a defined case helps operators maintain an orderly inventory and reduces human error during weigh-ins and calibrations. Compatible with industry practice and a recognisable brand Designed for use with knob/compact weights in the 1 g–5 g range and suitable for classes F1–M3, the case aligns with common metrology practice and complements existing weight sets from established manufacturers. The KERN designation signals compatibility with professional weighing equipment; origin details indicate manufacturing standards consistent with European metrology supplies. As a simple yet effective accessory, the case supports routine maintenance of weights without introducing complex handling procedures. Contact Metav Werkzeuge for tailored advice on integrating the KERN plastic case 347-030-400 into workshop or laboratory inventory — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise product matching and availability Technical Data Article number: 347-030-400 SKU: 347-030-400 GTIN: 4045761008663 Manufacturer: KERN Origin country: DE Material: Kunststoff Facts Weight (case): 0.02 kg ECLASS: 21100103 Tariff number: 84239090 Special features Case for individual weights Suitable for nominal values 1 g–5 g For calibration classes F1–M3 Designed for knob/compact weight form Category: Prüfgewichte (Waagen > Prüfgewichte) FAQ What weights fit this case? The Plastic case 347-030-400 fits individual knob/compact calibration weights with nominal values from 1 g–5 g, making it suitable for small weight sets. Is the case suitable for F1 and M3 class weights? Yes, the case is specified for use with weights in classes F1–M3, supporting common laboratory and workshop calibration needs. What material is the case made from and is it durable? The case is made of plastic, chosen to be both durable and lightweight, providing protection against contamination and handling wear during normal use. Can this case be used with weight sets from other manufacturers? The case is designed for knob/compact weight formats and will accommodate compatible 1 g–5 g pieces from other manufacturers if the form factor matches. Who supplies this product and how can it be obtained? This item is supplied by KERN and is available through Metav Werkzeuge; consult Metav for availability and compatibility advice Manufacturer: KERN · Address: Germany · Contact: info@metav-werkzeuge.com / +49 2822 7131930