10 kg Precision Calibration Weight Stainless Steel Fine-Turned Stackable, OIML Class M1 - KERN
€620.00
Product information "10 kg Precision Calibration Weight Stainless Steel Fine-Turned Stackable, OIML Class M1 - KERN"
Take advantage of precise, certified mass standards and robust stainless‑steel finishing to keep verification routines efficient and traceable; the stackable design reduces handling time and protects the weight when not in use. Order the product directly via Metav Werkzeuge or ask our consultants if needed.
KERN 347-141 Calibration weight — OIML class M1, 10 kg, turned stainless steel
The KERN 347-141 calibration weight is a stackable, OIML M1 reference mass designed for routine verification and calibration of industrial and laboratory scales.
- Calibration weight KERN 347-141, OIML class M1
- Nominal mass 10 kg, tolerance 500 mg
- Turned stainless steel, corrosion resistant
- Stackable design for safe storage
Assured accuracy for routine verification
The OIML class M1 designation ensures the weight meets recognised international tolerances, with a nominal mass of 10 kg and a tolerance of 500 mg, providing a dependable reference for mid‑range calibrations. Such classification supports traceable verification of balances and scales used in production control and quality assurance. By specifying an OIML‑rated reference, measurement uncertainty from the mass standard is minimised, aiding compliance with internal quality processes and external audit requirements.
Durable construction tailored to workshop environments
Manufactured from turned stainless steel, the weight combines dimensional stability with resistance to corrosion and staining, extending service life in workshop and laboratory settings. The machined finish reduces dirt accumulation and simplifies cleaning after repeated handling. The stackable form factor secures individual weights during storage and transport, reducing the risk of damage and ensuring that reference masses remain within specification for longer periods.
Integration into efficient calibration workflows
As a control weight, the unit is suitable for quick spot checks and routine calibration cycles, supporting fast decision‑making on the shop floor. Its compact cylinder dimensions (136×132 mm) and clear identification via SKU and GTIN allow simple inventory handling and traceability within calibration logs. Using a certified reference mass reduces downtime for balances and contributes to reliable production output by enabling fast verification without the need for complex equipment or procedures.
Reliability backed by recognised manufacturing
Produced by KERN, the component reflects established manufacturing standards for precision masses. The combination of certified accuracy and rugged materials makes this product appropriate for maintenance departments, calibration labs and industrial metrology applications where dependable, repeatable results are essential. Pairing such a mass with documented calibration intervals supports consistent measurement quality across operations.
For precise calibration and dependable stock supply, contact Metav Werkzeuge in Emmerich to arrange delivery of the KERN 347-141 calibration weight or to discuss suitability for specific scales — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 347
- SKU: 347-141
- Manufacturer: KERN
- GTIN: 4045761008915
- Country of origin: DE
Facts
- Nominal mass: 10 kg
- Tolerance (OIML M1): 500 mg
- OIML class: M1
- Cylinder dimensions: 136×132 mm
- Commodity code: 84239090
Special features
- Material: turned stainless steel
- Stackable
- Application: control/calibration weight
FAQ
What level of accuracy does this calibration weight provide?
The KERN 347-141 calibration weight is OIML class M1 with a tolerance of 500 mg on a 10 kg nominal mass, making it suitable for routine verification tasks and mid‑range calibrations.
Is this weight suitable for use in both workshops and laboratories?
Yes, the turned stainless‑steel construction and stackable design make the weight robust enough for workshop environments while offering the precision required in laboratory verification routines.
How does the stackable design benefit storage and handling?
Stackability reduces the footprint during storage, protects individual masses from impact, and simplifies inventory management, helping to maintain the condition and accuracy of the weights.
Which identifiers confirm the product and origin?
The product is supplied by KERN (SKU 347-141) with GTIN 4045761008915 and is marked with country of origin DE.
Can this weight be used for daily control checks on production scales?
Yes, as a control weight with OIML class M1 specification and a 10 kg nominal mass, it is appropriate for routine spot checks and ongoing verification of industrial scales.
KERN, Germany, GTIN 4045761008915
Zubehör
Preserve measurement integrity by using a lightweight leather/cotton glove pair that shields calibration weights from finger oils and moisture, extending their service life and reducing cleaning intervals; order directly via Metav Werkzeuge or consult our specialists for application advice. KERN 317-290 gloves — Leather/Cotton protection for calibration weights The KERN 317-290 gloves are designed to protect calibration weights from contamination and moisture during handling in workshops and laboratories Leather-lined cotton construction for gentle handling Protects weights from finger oils and moisture Suitable for calibration weights from 2 kg Lightweight design, compact storage Preserve calibration accuracy with gentle handling Handling mass standards without protection risks surface contamination that affects repeatability and traceability. The KERN 317-290 glove pair combines leather/cotton materials to provide a soft, low-abrasion contact surface that significantly reduces transfer of finger oils and deposits. This gentle barrier supports consistent readings by limiting the need for frequent cleaning, which in turn helps to maintain calibration schedules and reduces downtime for precision equipment. Streamline daily workflows in workshop and lab A reliable handling solution simplifies routine procedures: the gloves are optimised for daily handling of weights and are particularly suited to masses from 2 kg upward, where manual manipulation is common. Their lightweight construction allows extended wear without fatigue, improving operator comfort and process throughput. By preventing contaminant transfer, the gloves help to keep weighing stations operational and reduce the frequency of weight surface maintenance. Durable solution from a trusted precision partner Selecting accessories from established manufacturers contributes to consistent quality across the supply chain. These gloves are supplied by KERN and distributed via Metav Werkzeuge, whose service model acts as a quality filter for European workshops. The combination of robust materials and proven distribution practices supports long-term reliability and a steady supply of precision accessories for industry and trade. For protected handling of calibration weights, choose the KERN 317-290 leather/cotton gloves — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 317 SKU: 317-290 GTIN: 4045761134300 Manufacturer: KERN Facts Weight: 0.01 kg Suitable for calibration weights from 2 kg eClass: 40011201 Special features Material: leather/cotton Protects calibration weights from finger oils and moisture Contents: 1 pair Intended use: handling calibration weights in workshop or laboratory FAQ Are these gloves suitable for all calibration weight sizes? The gloves are intended for use with calibration weights from 2 kg and above; for smaller masses alternative handling tools may be recommended. How do the gloves protect the weights? The leather/cotton construction of the KERN 317-290 minimises direct skin contact and reduces transfer of oils and moisture that can alter weight surfaces. Can the gloves be cleaned or reused? The gloves are designed for repeated use; follow manufacturer care instructions to maintain material performance and surface cleanliness. Will using the gloves reduce the need to clean weights? Regular use of protective gloves lowers contamination rates and consequently reduces the frequency of weight cleaning and maintenance. Who supplies these gloves through Metav? The gloves are supplied by KERN and distributed via Metav Werkzeuge (SKU 317-290) as part of precision handling accessories. KERN — address and direct contact details not provided by the supplier
Combine robust, compact design with quick availability and precise fit for a 10 kg control weight; the wooden construction ensures secure handling and easy storage. Order the case directly via Metav Werkzeuge or consult our specialists for application advice. Holz-Etui KERN 337-141-200 — Wooden case for 10 kg control weight, unpadded the Holz-Etui KERN 337-141-200 is a wooden storage case designed to accommodate a single 10 kg control weight, offering compact protection for calibration and testing tasks Wooden case for 10 kg control weight Unpadded interior for custom protection Suitable for F2 and M1 control weights Secure storage and clear protection for calibration weights The wooden case is tailored to the safe storage of a 10 kg calibration or control weight, reducing the risk of surface damage during handling and transport. The unpadded interior offers a straightforward solution for workshops that prefer to apply bespoke padding or use the raw cavity for a snug fit. Built from solid wood, the case provides a stable shell that resists dents and deformation, while the compact form keeps the mass centrally supported, which helps to maintain the integrity of the control weight between uses and calibrations. Practical benefits for workshop workflows and logistics Designed for single-weight storage, the case supports fast, repeatable handling routines in metrology and maintenance environments. At a case weight of 3.1 kg, the container remains easy to move and stack, simplifying inventory management and transport within the workshop. The straightforward construction reduces maintenance needs and allows immediate use on site or in transit. Where traceable measurement work is required, this storage solution integrates neatly into calibration procedures and workshop workflows, supporting efficient turnaround and minimal handling complexity. Durable materials and responsible sourcing for everyday use Constructed from quality wood, the case combines durability with a tactile, repairable surface that is straightforward to maintain. The plain interior and robust exterior make the product suitable for repeated use in industrial settings where tools and standards are stored close to hand. The case is produced under the KERN brand, known for precision equipment, and is supplied via a distribution network that emphasises reliable fulfilment. This combination of durability and availability supports long-term operational reliability without adding unnecessary complexity to storage routines. For tailored advice on the KERN wooden case and to secure reliable supply from Metav Werkzeuge in Emmerich, contact our consultants for an assessment of suitability and delivery options Technical data Article number: 337 SKU: 337-141-200 GTIN: 4045761150676 Manufacturer: KERN Country of origin: DE Facts Case weight: 3.1 kg Intended for nominal value: 10 kg Tariff number: 84239090 ECLASS: 21100103 Special features Material: Wood Interior: Unpadded Design: For single control/test weights Product group: Wooden case for test weights FAQ Is this case suitable for a 10 kg calibration weight? The case is intended for a 10 kg nominal control weight and provides rigid protection for calibration and storage tasks. Does the case come padded? The interior is unpadded; the design allows bespoke padding to be added if a softer internal lining is required. Which accuracy classes is the case intended for? The wooden case is supplied for use with control weights in classes F2 and M1, matching common workshop calibration needs. What is the weight of the empty case? The empty case weighs approximately 3.1 kg, which supports easy handling and stacking in workshop environments. KERN — Germany