10 g Precision Carrier Rod For Slotted Weights, OIML Class M1, Aluminium - KERN

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of the combination of OIML‑class M1 accuracy, a nominal value of 1 g, and finely turned stainless steel construction for consistent calibration results; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. Slotted weight 347-015 (KERN) — OIML M1, 1 g, finely turned stainless steel The Slotted weight 347-015 is a single calibration mass designed for precise verification of balances and scales in laboratories and workshops, supplied as a Type A slot weight for secure mounting on carrier rods. OIML class M1 certified Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Compatible with Type A slot carrier rods Precision that supports reliable measurements The slotted calibration mass provides a reproducible reference for routine checks and conformity testing. Certified to OIML M1, the mass has a nominal value of 1 g and an OIML tolerance of 1 mg, which ensures repeatable measurement results when comparing instruments or performing short‑term verifications. Using a standardised reference mass reduces measurement uncertainty and supports documented quality processes in production and inspection environments. Robust design for long service life Manufactured from finely turned stainless steel, this reference mass resists surface degradation and maintains geometry over repeated use. The slotted design (Type A) enables secure attachment to carrier rods and balance pans without additional fixtures, simplifying handling during calibration sequences. The combination of material and machining quality ensures dimensional stability and low susceptibility to contamination, contributing to consistent weighing performance over time. Integrates into workshop and laboratory routines As a single reference weight, the component is suitable for quick checks, routine calibration sequences and equipment validation. Its compact dimensions and standard mounting style allow easy incorporation into calibration kits and mobile verification sets, speeding up on‑site checks and reducing downtime. Supplied as a precision single weight, it supports traceable procedures and can be used alongside documented calibration intervals to maintain instrument reliability. Contact Metav Werkzeuge in Emmerich for tailored calibration guidance and secure delivery of the KERN slotted weight 347-015 with OIML M1 accuracy Technical data Article number: 347-015 SKU: 347-015 GTIN: 4045761256132 Manufacturer: KERN Country of origin: DE Numbers / Core technical data Nominal value: 1 g OIML class: M1 OIML tolerance: 1 mg Cylinder dimensions: 13×2 mm Tariff number: 84239090 Designs / Special features Material: finely turned stainless steel Slotted weight (Type A) Single weight for verification and calibration Compatible with all Type A slot weights/carrier rods FAQ What accuracy class does this calibration mass comply with? The slotted weight 347-015 complies with OIML class M1, providing a nominal value of 1 g and an OIML tolerance of 1 mg, suitable for routine verification tasks. Can the weight be used with common carrier rods and pans? Yes, the product is a Type A slotted weight, compatible with all standard Type A carrier rods and pan holders used for small reference masses. What material is the weight made from and why does it matter? The weight is made from finely turned stainless steel, which offers dimensional stability and resistance to surface wear, helping to maintain calibration integrity over repeated use. Is the weight intended for laboratory or workshop use? The 347-015 slotted weight is suitable for both laboratory and workshop environments, serving as a reliable single reference mass for routine checks and instrument verification. Manufacturer: KERN, Germany — Contact: info@metav-werkzeuge.com · +49 2822 7131930