10 kg Calibration Weight Button Shape Fine-Turned Stainless Steel, OIML M2 - KERN

Preserve measurement integrity by using a lightweight leather/cotton glove pair that shields calibration weights from finger oils and moisture, extending their service life and reducing cleaning intervals; order directly via Metav Werkzeuge or consult our specialists for application advice. KERN 317-290 gloves — Leather/Cotton protection for calibration weights The KERN 317-290 gloves are designed to protect calibration weights from contamination and moisture during handling in workshops and laboratories Leather-lined cotton construction for gentle handling Protects weights from finger oils and moisture Suitable for calibration weights from 2 kg Lightweight design, compact storage Preserve calibration accuracy with gentle handling Handling mass standards without protection risks surface contamination that affects repeatability and traceability. The KERN 317-290 glove pair combines leather/cotton materials to provide a soft, low-abrasion contact surface that significantly reduces transfer of finger oils and deposits. This gentle barrier supports consistent readings by limiting the need for frequent cleaning, which in turn helps to maintain calibration schedules and reduces downtime for precision equipment. Streamline daily workflows in workshop and lab A reliable handling solution simplifies routine procedures: the gloves are optimised for daily handling of weights and are particularly suited to masses from 2 kg upward, where manual manipulation is common. Their lightweight construction allows extended wear without fatigue, improving operator comfort and process throughput. By preventing contaminant transfer, the gloves help to keep weighing stations operational and reduce the frequency of weight surface maintenance. Durable solution from a trusted precision partner Selecting accessories from established manufacturers contributes to consistent quality across the supply chain. These gloves are supplied by KERN and distributed via Metav Werkzeuge, whose service model acts as a quality filter for European workshops. The combination of robust materials and proven distribution practices supports long-term reliability and a steady supply of precision accessories for industry and trade. For protected handling of calibration weights, choose the KERN 317-290 leather/cotton gloves — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 317 SKU: 317-290 GTIN: 4045761134300 Manufacturer: KERN Facts Weight: 0.01 kg Suitable for calibration weights from 2 kg eClass: 40011201 Special features Material: leather/cotton Protects calibration weights from finger oils and moisture Contents: 1 pair Intended use: handling calibration weights in workshop or laboratory FAQ Are these gloves suitable for all calibration weight sizes? The gloves are intended for use with calibration weights from 2 kg and above; for smaller masses alternative handling tools may be recommended. How do the gloves protect the weights? The leather/cotton construction of the KERN 317-290 minimises direct skin contact and reduces transfer of oils and moisture that can alter weight surfaces. Can the gloves be cleaned or reused? The gloves are designed for repeated use; follow manufacturer care instructions to maintain material performance and surface cleanliness. Will using the gloves reduce the need to clean weights? Regular use of protective gloves lowers contamination rates and consequently reduces the frequency of weight cleaning and maintenance. Who supplies these gloves through Metav? The gloves are supplied by KERN and distributed via Metav Werkzeuge (SKU 317-290) as part of precision handling accessories. KERN — address and direct contact details not provided by the supplier

Take advantage of a robust combination of aluminium protection, a padded interior and suitability for single calibration weights up to 10 kg, ensuring safe transport and reliable storage of sensitive masses; order the KERN aluminium‑protected case directly via Metav Werkzeuge or consult our specialists for assistance. Aluminium-protected case for single weights KERN 317-140-600 — aluminium, padded The Aluminium-protected case for single weights offers secure storage and transport for calibration weights used in laboratories, workshops and service rounds. Aluminium shell with internal padding For single weights up to 10 kg Suitable for classes E1–M3 Protect equipment during transport and storage The rigid aluminium outer shell provides a lightweight yet durable barrier against knocks and compression, while the padded interior cushions each weight to prevent scratches and preserve calibration surfaces. This reduces the risk of damage during handling and transit and therefore helps to maintain the calibration integrity of measurement equipment. The result is fewer service interruptions and lower refurbishment needs for precision masses. Designed for precise weight sets and compliance Engineered for single calibration weights in the knob/compact form, the case accommodates nominal masses up to 10 kg and supports weights classified E1–M3, offering a compact solution for certified mass sets. The internal layout secures items in a fixed position, which minimises movement that could affect traceability or require re‑verification after transport. For workshops and calibration labs, this equates to dependable handling that supports compliance with measurement standards. Practical handling that saves time on the workshop floor Weighing approximately 1.4 kg, the case remains easily portable without compromising protective performance. The format and padding enable rapid packing and unpacking during calibration rounds, shortening setup time and increasing productive hours. The combination of secure transport and quick access makes this case a practical asset for technicians who value efficiency and safeguarding precision instruments. Contact Metav Werkzeuge today for advice on the KERN aluminium‑protected case 317-140-600 and arrange secure delivery from our Emmerich warehouse Technical data Article number: 317-140-600 SKU: 317-140-600 GTIN: 4045761136038 Manufacturer: KERN Material: Aluminium Origin country: CN Commodity code: 84239090 Case weight: 1.4 kg For weights: up to 10 kg For classes: E1–M3 Special feature: padded Facts Weight (case): 1.4 kg Nominal weight capacity: 10 kg Classification range: E1–M3 GTIN: 4045761136038 Commodity code: 84239090 eCl@ss: 21100103 Special features Aluminium-protected outer shell Padded interior for single weights (knob/compact) Designed for calibration and secure transport Suitable for professional laboratories and workshops Compact, lightweight construction FAQ What nominal weights fit this case? The case is suitable for single nominal weights up to 10 kg and is designed to hold knob/compact style masses securely. Is the case compatible with E1 calibration classes? Yes, the design accommodates weights classified across the range E1 to M3, supporting high‑accuracy sets. How does the padding protect calibration surfaces? The padded interior prevents direct contact and abrasion between weights, preserving the surface finish and reducing the need for re‑verification. Can the case be used for non‑standard or irregularly shaped weights? The internal layout is optimised for knob/compact shapes; irregular weights may not be held as securely without additional customised support. Where is the product manufactured? The aluminium‑protected case is produced in CN and supplied under the KERN brand. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930

Take advantage of robust wooden construction, compact storage for 10 kg single calibration weights and compatibility with several KERN weight series for tidy workshop organisation. Order the case directly via Metav Werkzeuge or consult our specialists for suitability. Wooden case 337-140-200 – wooden storage for single calibration weights, compatible with KERN Wooden case 337-140-200 provides a compact storage solution for single calibration weights with a button/compact form, designed for safe, space-efficient organisation in metrology and workshop environments. Wooden construction for stable storage Compatible with KERN 337/347/357/367 weights Unpadded interior for compact fit Lightweight at 0.82 kg for easy handling Secure, space-saving storage that protects weight geometry The wooden construction offers a stable shell that reduces the risk of deformation or accidental knocks during storage. Designed specifically for single calibration weights with a nominal value of 10 kg, the case keeps individual masses organised and immediately identifiable, which supports efficient calibration workflows. The unpadded interior reduces overall bulk and allows close contact between case and weight to prevent movement; for delicate handling of calibrated masses, this design minimises shifting while maintaining the compact footprint required in busy test rooms. Clear compatibility for streamlined inventory and handling Compatibility with KERN single weights (models 337, 347, 357, 367) simplifies stock management: identical packaging standards mean the same case can be used across several weight series. The shape accommodation for button/compact designs ensures a snug fit, reducing the need for additional inserts. For laboratories and workshops relying on repeatable handling, this uniformity reduces handling time and supports consistent measurement conditions by keeping calibration masses in a stable, designated location. Practical workshop benefits from material choice and form factor Made from wood, the case balances rigidity and low weight — the empty unit weighs approximately 0.82 kg, making handling between storage and workbench straightforward. The material choice contributes to a tactile, durable exterior that tolerates routine use in industrial and craft settings. Manufactured in Germany, the product aligns with established production standards and provides a simple, reliable storage option for calibration equipment where straightforward protection and easy identification are priorities. For secure storage of KERN single calibration weights choose the 337-140-200 wooden case and contact Metav Werkzeuge in Emmerich for advice or to place an order through our distribution channel. Technical Data SKU: 337-140-200 Manufacturer: KERN GTIN: 4045761006560 Country of origin: Germany Product group: Wooden case for single weights Facts Suitable nominal weight: 10 kg Net weight (empty): 0.82 kg ECLASS: 21100103 Tariff number: 84239090 Special features Material: Wood Interior: Unpadded Compatible with: KERN 337, 347, 357, 367 single weights Form: Button/compact design FAQ Is this case suitable for a 10 kg single calibration weight? Yes. The wooden case 337-140-200 is specified for single calibration weights with a nominal value of 10 kg and provides a compact storage solution. Which KERN weight models fit this case? The case is compatible with KERN single weights of model series 337, 347, 357 and 367, designed for button/compact geometries. Does the case include internal padding to protect weights? No. The interior is unpadded, offering a compact fit intended for button/compact single weights without additional inserts. Is the case lightweight for frequent handling in a workshop? Yes. The empty wooden case weighs approximately 0.82 kg, allowing easy movement between storage and the workbench. KERN · Germany · info@metav-werkzeuge.com · +49 2822 7131930

Protect calibration weights with a durable, lightweight plastic case that suits nominal 10 kg weights and accuracy classes F1–M3; the compact design secures button/compact weights for storage and transport. Order the item directly via Metav Werkzeuge or ask the consultants for availability and technical clarification. KERN 347-140-400 Plastic case for individual calibration weights — for 10 kg, classes F1–M3 KERN 347-140-400 is a plastic storage case designed to protect and organise individual calibration weights in laboratories and workshops, compatible with button/compact styles. Plastic case for individual calibration weights Fits nominal 10 kg weights Suitable for classes F1–M3 Compatible with button/compact weights Secure storage for precision assets that keeps workflows efficient The plastic case provides organised compartments for individual calibration weights, reducing search time and minimising handling errors. With a design matched to button/compact forms, the layout secures each weight during movement and storage; this supports faster set-up times in routine checks and calibrations. The combination of compact form and clear internal organisation helps maintain the condition of precision masses, which in turn reduces recalibration frequency and downtime. Specified for metrology classes and practical handling Designed specifically for weights with a nominal value of 10 kg and for accuracy F1–M3, the case aligns with common metrology standards, making it a practical choice for calibration labs and industrial workshops. The lightweight plastic construction ensures easy transport between bench and storage while still providing physical protection. Where specialist terminology is used, the listed accuracy classes indicate tolerance ranges and suitability for verification tasks; selecting the correct class prevents measurement errors and ensures traceability in audit situations. Practical benefits for workshops and calibration services This case supports standardised handling procedures by keeping individual weights accessible and identifiable, which improves workflow reliability across shifts. The compact footprint and protective interior reduce the risk of surface damage to calibration masses, preserving measurement integrity. For facilities seeking consistent results with small storage and handling effort, the case offers a straightforward, maintenance-light solution that complements existing calibration equipment. Contact Metav Werkzeuge in Emmerich for precise availability and tailored advice on integrating the KERN 347-140-400 into workshop routines — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 347-140-400 Manufacturer: KERN GTIN: 4045761008908 Origin: DE Material: Kunststoff Facts Nominal weight suitability: 10 kg Accuracy classes: F1–M3 Net weight: 0.02 kg Tariff code: 84239090 ECLASS: 21100103 Special features For individual/button and compact weights Case material: Plastic Intended use: Storage and transport of calibration weights SKU: 347-140-400 FAQ Which nominal value is this case suitable for? The KERN 347-140-400 plastic case accommodates individual calibration weights with a nominal value of 10 kg and is specified for accuracy classes F1–M3. Can button or compact weights be stored securely? Yes. The case is shaped for button/compact forms and contains dedicated compartments that keep each weight protected and organised during storage and transport. What is the case material and net weight? The case is manufactured from durable plastic and has a net weight of 0.02 kg, offering a lightweight storage option without compromising protection. Which accuracy classes are compatible with this case? The case is intended for calibration weights in classes F1 to M3, covering a range of common verification and calibration tasks in laboratories and workshops. Manufacturer: KERN — Germany; Sales and technical enquiries via Metav Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930