10 kg Calibration Weight Knob And Cylinder Form OIML Class M3, Painted Cast Iron, 5 g Tolerance - KERN
€103.00
Product information "10 kg Calibration Weight Knob And Cylinder Form OIML Class M3, Painted Cast Iron, 5 g Tolerance - KERN"
Benefit from precise OIML M3 accuracy, robust painted cast iron construction and a practical knob for safe handling — ideal for routine verification of industrial scales. Order the calibration weight directly via Metav Werkzeuge or consult our specialists for application advice.
KERN 366-97 Calibration Weight (OIML M3, 10 kg) — Painted Cast Iron, Knob & Cylinder
A KERN 366-97 calibration weight designed for traceable verification of industrial and workshop balances, supplied in a knob-and-cylinder shape for reliable handling.
- OIML M3 calibration class
- Nominal value 10 kg
- Painted cast iron construction
- Knob for secure handling
Accurate class compliance for routine verification
The OIML M3 classification provides a recognised balance between cost and metrological reliability, making this weight suitable for periodic checking of floor and industrial scales. With a nominal value of 10 kg and an OIML tolerance of 5 g, the mass can be integrated into regular control procedures to document repeatable results. The clarified class designation supports compliance protocols and internal quality records without over‑specification for non‑calibration-laboratory environments.
Robust construction that reduces handling risk
Manufactured from painted cast iron, the weight resists surface wear and offers long service life in workshop conditions. The knob-and-cylinder form prevents slippage during placement, speeding up repetitive checks and lowering the risk of accidental drops. The solid construction also simplifies storage and routine maintenance: light cleaning and careful handling preserve the protective coating and the stated tolerance over many cycles.
Practical dimensions and traceable identification
Compact dimensions of 121×193 mm for the cylinder shape allow straightforward use on large balances and weighing platforms where space is constrained. Clear identification via the SKU and GTIN ensures traceability in inventory systems and calibration logs, while the origin (Germany) signals established manufacturing practices. Together, these aspects support efficient workshop workflows and make integration into existing verification routines straightforward.
Reliability for workshop and industrial environments
The single‑weight design is optimised for frequent use on industrial scales, offering a pragmatic combination of durability and metrological performance. The painted finish reduces corrosion risk in standard ambient conditions, while the knob simplifies lifting and placement — features that contribute to fewer interruptions in production and quicker verification cycles. Confidence in routine checks is a practical advantage for quality-conscious operations.
Contact Metav Werkzeuge for application guidance or to order the KERN 366-97 calibration weight directly — specialists in precision tools from Emmerich with supply certainty for industry and trade.
Technical data
- Article number: 366
- SKU: 366-97
- GTIN: 4045761012165
- Manufacturer: KERN
- Origin: Germany
- Material: Painted cast iron
- OIML class: M3
- Form: Knob and cylinder
- Commodity code: 84239090
Facts
- Nominal value: 10 kg
- Tolerance (OIML): 5 g
- Dimensions (cylinder): 121×193 mm
Special features
- Single weight
- Painted cast iron finish
- Knob for secure handling
- OIML M3 compliance
FAQ
Is this weight suitable for routine verification of industrial floor scales?
Yes, the KERN 366-97 calibration weight (OIML M3, 10 kg) is intended for routine verification tasks on industrial and workshop scales where an M3 class weight meets operational requirements.
How precise is the KERN 366-97 and what does the tolerance mean?
The stated tolerance of 5 g (OIML M3) indicates the permissible deviation for the 10 kg nominal mass and is appropriate for regular control checks rather than primary laboratory calibrations.
What maintenance is required to preserve the weight's accuracy?
Regular visual inspection and light cleaning of the painted cast iron surface are recommended; avoid abrasive cleaners and impacts to the knob or cylindrical surfaces to maintain the specified tolerance.
Can the weight be used on small bench balances?
While physically usable on some large bench balances, the 10 kg nominal mass and cylinder dimensions make it most practical for floor and industrial scales rather than precision laboratory balances.
Does the product include traceability documentation?
The KERN 366-97 is identified by SKU and GTIN for inventory and traceability; certification or calibration certificates must be requested separately if required for accredited calibration records.
Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930
Zubehör
Take advantage of gentle, cotton handling and reliable contamination protection to extend the service life of precision weights; order directly from Metav Werkzeuge or contact our consultants for tailored advice. Gloves KERN 317-280 — Cotton gloves for protecting test weights up to 2 kg The Gloves KERN 317-280 are designed to protect test weights and precision masses from finger grease and moisture during everyday handling in workshops and calibration labs. Cotton construction for gentle handling Protects test weights from finger grease Suitable for test weights up to 2 kg Lightweight, reusable pair for workshop use Preserve measurement accuracy with clean handling Handling delicate masses without contamination helps to maintain precision and reduces the need for frequent recalibration. The KERN cotton gloves provide an effective barrier against finger grease and light moisture, keeping surfaces free of oils that can alter measured mass. By preventing direct contact, the gloves contribute to consistent readings and minimise the risk of measurement drift, supporting reliable quality control in routine metrology tasks. Practical protection for everyday workshop routines Lightweight and easy to store, this pair is tailored for straightforward use in production and service environments. The simple design allows quick application while handling small test weights, helping to maintain workflow speed without compromising care. Suitable for masses up to 2 kg, the gloves enable safe manipulation of common calibration weights, combining protection with operational convenience to keep processes efficient and repeatable. Why cotton is the right material for delicate tools Cotton fibres offer a soft, absorbent contact surface that decreases the transfer of oils and residues onto sensitive metal surfaces. The natural fabric reduces abrasion risk compared with harsher materials, providing gentle handling that preserves finish and mass integrity. At an almost negligible net weight, the gloves do not affect the handling ergonomics of small weights but do increase confidence in routine handling and storage practices. Contact Metav Werkzeuge for personalised advice or to secure the KERN cotton gloves from our Emmerich stock; our team will assist with product details and suitability for specific calibration needs. Technical data Article number: 317 SKU: 317-280 Manufacturer: KERN Facts Net weight: 0.01 kg Suitable for test weights up to 2 kg GTIN: 4045761003866 Special features Material: cotton Protects test weights from finger grease and moisture Supplied as one pair Segment: Test weight accessories FAQ Are these gloves suitable for precision balances? The KERN 317-280 gloves are intended to protect precision masses and are suitable for handling small test weights used with precision balances. How do the gloves protect test weights? The cotton fibres of the gloves reduce oil and moisture transfer, helping to keep the surface of test weights clean and preserving measurement accuracy. Can the gloves be used for weights above 2 kg? The gloves are specified as ideal for handling test weights up to 2 kg; heavier items may require different handling methods or protective equipment. What material are the gloves made from? The gloves are made from cotton, chosen for its gentle contact and absorbent properties. Is the KERN 317-280 pair reusable? The gloves are designed for repeated use in workshop routines, offering lightweight, practical protection for daily handling of test weights. Metav Werkzeuge — Emmerich am Rhein, Germany · eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271