16mm Angle Cutter 45° HSS-Co 10 Flutes, Right-Hand Cut - ALPEN-MAYKESTAG GmbH

Take advantage of the combination of HSS‑Co construction, a 45° cutting geometry and a durable cylindrical shank with drive flat for reliable chamfering in mixed workshop environments. Order directly via Metav Werkzeuge or consult the team for application advice.

MAYKESTAG 45° Chamfer Cutter (DIN 1833C, HSS‑Co, Ø16 mm)

The MAYKESTAG 45° chamfer cutter is a DIN‑standard Type N milling tool designed for precise chamfering and angle milling in structural and short‑chip non‑ferrous materials

• 45° angled cutter for precise chamfering
• HSS‑Co material for high wear resistance
• 16 mm diameter with 10 cutting edges
• Cylindrical shank with drive flat, Ø12 mm

Faster, more reliable chamfering on production parts

The 45° geometry combined with 10 cutting edges delivers a stable cutting action that reduces vibration and improves surface finish when forming chamfers or bevels. Manufactured from HSS‑Co, the tool resists heat build‑up and wear better than standard high‑speed steels, which extends tool life and reduces unplanned tool changes. Compliance with DIN 1833C Type N ensures the cutter meets recognised dimensional and performance standards, making it a predictable choice for repeatable production tasks. The result is improved process reliability and fewer interrupted runs in both job‑shop and industrial settings.

Material compatibility and application benefits

Designed for milling of structural, case‑hardened and tempered steels as well as short‑chip non‑ferrous metals, this cutter supports a wide range of workshop applications. The right‑hand cutting orientation and robust geometry are optimised for short‑chip materials, helping to avoid built‑up edge and maintain consistent cutting forces. For users with limited metrology experience, the relationship between cutting length, diameter and flute count is straightforward: a Ø16 mm body with a 10 mm cutting length balances chip evacuation and tool stiffness for typical chamfering depths. This translates into time savings on secondary operations and higher first‑pass yield.

Practical set‑up and integration into existing tooling

A cylindrical shank with drive flat (Ø12 mm) simplifies clamping in standard collets and chucks while preventing slippage under torque. The overall length of 60 mm provides enough reach for recessed chamfers while keeping run‑out and deflection low. The combination of shank and drive flat reduces set‑up time and the risk of workpiece rework caused by slipping tools. For programming or CAM preparation, the cutter’s DIN classification and clear geometric data support rapid tool library entry and predictable cycle times, helping to streamline machining processes on milling centres and CNC machines.

Economical choice for workshops and production lines

Selecting a cobalt‑alloy HSS‑Co tool for chamfering can be more economical than carbide in many intermittent or mixed‑material operations. The alloy offers improved toughness for interrupted cuts and better resistance to chipping in marginal conditions, which can reduce the frequency of tool replacement and lower overall operating costs. Where carbide is prone to fracture under shock loads or where setup variability exists, the HSS‑Co solution provides a balance of performance and robustness that keeps production moving with fewer stoppages.

Contact Metav Werkzeuge today to discuss how this MAYKESTAG chamfer cutter fits into current machining processes or to request tailored application guidance from the Metav specialists

Technical data

• SKU: 4117802055NW
• Label: Winkelfräser DIN 1833C Typ N, 45° chamfer cutter
• Manufacturer: ALPEN‑MAYKESTAG GmbH

Core data

• Diameter: 16 mm
• Overall length: 60 mm
• Cutting length: 10 mm
• Shank diameter: 12 mm
• Number of cutting edges: 10
• Cutting direction: right‑hand
• Material: HSS‑Co

Special features

• DIN 1833C Type N
• Cylindrical shank with drive flat
• Suitable for structural, case‑hardened and tempered steels
• Suitable for short‑chip non‑ferrous metals
• Intended for chamfering and angle milling

FAQ

What materials is this cutter suitable for?
The cutter is made in HSS‑Co and is suitable for structural, case‑hardened and tempered steels, as well as short‑chip non‑ferrous metals, matching the intended applications described for the MAYKESTAG chamfer cutter (SKU 4117802055NW).

How does the 10‑edge geometry affect performance?
The 10 cutting edges increase engagement per tooth, improving surface finish and distributing wear; in practice this gives a steadier cut and longer tool life on typical chamfering tasks.

Is the shank compatible with standard tooling systems?
Yes — the Ø12 mm cylindrical shank with drive flat is compatible with common collet chucks and holders, reducing the risk of slippage and shortening set‑up time.

Does the cutter comply with industry standards?
The tool conforms to DIN 1833C Type N, which provides consistent geometry and dimensions for reliable CAM programming and predictable machining outcomes.

Can this cutter be used for interrupted cuts or rough environments?
Thanks to its HSS‑Co composition and robust geometry, the cutter tolerates interrupted cuts better than many carbide alternatives, offering higher toughness in variable shop conditions.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com