7.5mm Slot Cutter HSS-Co 6 Teeth 6mm Cutting Length Right-Hand - ALPEN-MAYKESTAG GmbH

Take advantage of a high‑performance HSS‑Co construction and DIN 850 D geometry to combine durable wear resistance with reliable slotting results; the cutter’s 6 flutes and 6 mm cutting length provide smooth chip evacuation and consistent surface finish. Order the slot milling cutter directly via Metav Werkzeuge or consult our specialists for application support.

Slot milling cutter DIN 850 D Type N — 7.5 mm HSS‑Co (MAYKESTAG)

The slot milling cutter DIN 850 D Type N, 7.5 mm HSS‑Co is designed for slotting and face milling of construction, case‑hardened and quenched steels as well as short‑chipping non‑ferrous materials in production and workshop settings

• HSS‑Co for high wear resistance
• DIN 850 D Type N geometry
• 6 cutting edges for smooth finish
• Suited for steels and non‑ferrous metals

Increase throughput with consistent chip control and surface quality

The combination of HSS‑Co tool steel and a Type N geometry gives predictable performance under interrupted and continuous cuts, translating into fewer rework steps and higher first‑pass yield. The tool’s 6 flutes optimise chip load distribution, which reduces vibration and produces a more uniform surface finish on workpieces. For buyers seeking measurable production improvements, this translates into shorter cycle times and more stable process windows when machining medium‑hard steels and short‑chipping alloys.

Broad material compatibility reduces tooling variants in the tool crib

Constructed from HSS‑Co, the cutter tolerates higher temperatures at the cutting edge than standard HSS, allowing reliable operation in a wide range of materials. The tool is suitable for construction steels, case‑hardened and quenched steels, and short‑chipping non‑ferrous metals, enabling consolidation of tooling stocks. Explaining the term: HSS‑Co means high‑speed steel with cobalt alloying, which offers improved red hardness and abrasion resistance compared with plain high‑speed steels — a clear advantage when tools are used intermittently at higher cutting speeds.

Practical design for secure mounting and efficient handling

A cylindrical shank with drive flat and a shank diameter of 6 mm ensures a secure grip in standard toolholders and reduced run‑out, which supports higher precision in slotting operations. The tool’s right‑hand cutting orientation and a cutting length of 6 mm match common setup conventions, simplifying programming and fixturing. The cutter’s overall length of 50 mm permits use in many standard vertical and horizontal milling setups without compromising rigidity for typical slot depths.

Application guidance and process reliability

When used according to machine capabilities and recommended feeds and speeds, the geometry defined by DIN 850 D promotes reliable chip formation and evacuation. For shops less familiar with the standard, DIN 850 D specifies dimensions and tolerances for this kind of cutter, helping engineers select compatible holders and set expected machining parameters. The result is easier process documentation, repeatable setups and less trial‑and‑error during process qualification.

For reliable slotting in steels and short‑chipping non‑ferrous metals, choose the MAYKESTAG 7.5 mm HSS‑Co slot milling cutter and contact Metav Werkzeuge for tailored application advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930

Technical Data

• Article number: 4117802222NW
• Label: Schlitzfräser DIN 850D Typ N D.7,5mm HSS‑Co Z.6 L.2mm MAYKESTAG
• Manufacturer: ALPEN‑MAYKESTAG GmbH

Facts

• Material: HSS‑Co
• Diameter: 7.5 mm
• Overall length: 50 mm
• Cutting length: 6 mm
• Cutting edges: 6
• Shank diameter: 6 mm
• Cutting direction: right‑hand

Special features

• Conforms to DIN 850 D
• Type N geometry
• Cylindrical shank with drive flat
• Suitable for construction, case‑hardened and quenched steels
• Suitable for short‑chipping non‑ferrous metals

FAQ

What materials can be machined with this cutter?
The slot milling cutter is designed for construction steels, case‑hardened and quenched steels and for short‑chipping non‑ferrous metals; the HSS‑Co composition provides enhanced heat and wear resistance suitable for these applications.

What are the key dimensions and mounting details?
The tool has a 7.5 mm diameter, 6 mm cutting length and a 6 mm shank diameter; the cylindrical shank with drive flat is compatible with standard collets and toolholders for stable mounting.

Is this cutter suitable for high‑speed machining?
The cobalt‑alloyed HSS‑Co grade offers improved red hardness compared with plain HSS, making the cutter suitable for elevated cutting speeds within the machine and process limits specified by the workshop.

How does the DIN 850 D designation affect selection?
DIN 850 D defines geometry and tolerances for this cutter type, aiding in predictable performance and compatibility with existing fixtures and process documentation; selecting a cutter to this standard reduces setup variability.

How many flutes does the cutter have and what is the benefit?
With 6 flutes, the cutter balances chip evacuation and surface finish, reducing vibration and improving dimensional stability during slotting operations.

Manufacturer: ALPEN‑MAYKESTAG GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com