6000 g Precision Laboratory Balance 1 g Readability Stainless Steel Pan 150×170 mm, 165×230×80 mm - KERN

Take advantage of a compact, retrofit-ready solution for underfloor weighing of suspended loads; the hook is compatible with KERN 440 precision scales and designed for straightforward integration. Order or request advice directly via Metav Werkzeuge for fast, expert guidance. Hook 440-A01 — Underfloor weighing accessory for KERN precision scales The 440-A01 hook is a dedicated accessory for underfloor weighing, created to support the safe suspension and accurate measurement of hanging loads on KERN precision scales. Retrofit-ready for quick installation Compatible with KERN 440 precision scales Designed for underfloor weighing of suspended loads Improved flexibility for existing weighing systems The retrofit capability of this accessory makes it simple to upgrade existing scales without replacing the base unit. When fitted to compatible equipment, the hook enables reliable underfloor weighing of hanging items while preserving the original calibration and setup of the base scale. For workshops and production lines that require occasional changes to weighing configuration, this accessory reduces downtime and avoids the need for multiple specialised scales by extending the functionality of one trusted system. Precise handling of suspended loads for consistent results Engineered for the application of suspended-load measurement, the hook supports stable load suspension and helps to maintain the precision expected from industrial weighing equipment. By providing a dedicated interface between the load and the scale, the accessory contributes to repeatable results and reduces variables that can compromise measurement integrity. The design is intended to work in concert with KERN’s measurement electronics to preserve accuracy during routine weighing operations. Compact design with low handling weight for efficient logistics With a nominal weight of 0.01 kg, the hook is intentionally compact for easy handling and storage. The small footprint simplifies retrofitting in confined spaces and streamlines inventory management where multiple accessories are used across a fleet of scales. Supplied as a manufacturer‑specified accessory and noted for straightforward compatibility, this component supports efficient workshop workflows and helps maintain precise measurement capabilities with minimal logistic overhead. For confirmation of compatibility with specific models or to arrange supply of the KERN 440‑A01 hook, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on integration and availability. Technical data Article number: 440-A01 SKU: 440-A01 Manufacturer: KERN GTIN: 4045761068933 Origin: CN Numbers / Core technical data Weight: 0.01 kg ECLASS: 27400890 Tariff number: 84239010 Special features / Designs For underfloor weighing of suspended loads Compatible with KERN 440 precision scales Retrofit-ready; series-compatible accessory PCB (product data note) FAQ Is the hook compatible with KERN 440 scales? The hook 440‑A01 is designed for compatibility with KERN 440 precision scales and intended for underfloor weighing of suspended loads. Can the accessory be retrofitted to existing equipment? Yes, the 440‑A01 hook is retrofit-ready and specified for straightforward integration with compatible KERN units. What is the weight of the accessory? The 440‑A01 hook has a nominal weight of 0.01 kg. Is the material composition specified? Material details are not specified in the provided product data; please contact Metav Werkzeuge for further technical information. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of a simple, cost-effective solution for protecting scale controls and casing: the covers shield the keyboard and housing while being easy to replace, and they match weighing areas of 150 x 170 mm. Order the protective cover directly via Metav Werkzeuge or consult our specialists if compatibility questions arise. KERN 440-530-002S05 Protective Cover for 440-A/N — fits 150 x 170 mm weighing surfaces, pack solution The KERN 440-530-002S05 protective cover shields the keyboard and housing of compatible 440-series bench scales, designed for everyday workshop environments Pack of five protective covers Protects keyboard and housing Fits 150 x 170 mm weighing surfaces Compatible with KERN 440-A/N scales Minimise downtime with targeted surface protection A lightweight protective cover provides a practical barrier against dust, splashes and incidental contamination, helping to preserve the function of control elements and enclosure surfaces. By shielding the keyboard and housing, the accessory reduces the frequency of intensive cleaning cycles and the risk of service interventions, which supports continuous operation in production and inspection environments. This approach delivers a tangible cost-benefit: fewer interruptions and lower maintenance effort for measuring stations with a 150 x 170 mm weighing area. Streamlined maintenance that keeps processes reliable Replacing a worn cover is a straightforward measure to maintain a hygienic and orderly workstation without complex procedures. The pack format allows scheduled swaps and quicker turnaround in multi-station settings, enabling workshops and labs to standardise protective routines. Metav Werkzeuge’s role as a precision partner ensures that procurement is backed by a quality filter in Emmerich, supplying reliable accessories that align with professional workflows and reduce administrative overhead. Workshop-ready compatibility for controlled environments The design is intended to fit over the control panel and device casing of compatible bench scales commonly used in industrial metrology. Clear specification for a 150 x 170 mm weighing surface helps to match the right cover to the instrument, avoiding ill-fitting solutions that fail to protect sensitive components. The accessory supports consistent measurement conditions by keeping external contaminants away from critical interfaces, thereby contributing to measurement stability and longevity of the instrument. For supply from Emmerich and personalised advice on compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 440-530-002S05 Manufacturer: KERN GTIN: 4045761185395 Country of origin: CN Commodity code: 39269097 Facts Weight: 0.03 kg Suitable for weighing surface: 150 x 170 mm Pack contents: 5 pieces Special features Covers keyboard and housing Accessory for 440-A/N series scales Delivered as a set for regular replacement FAQ Are these covers suitable for repeated use? The KERN 440-530-002S05 protective cover can be reused depending on contamination level and handling; replacement is recommended when integrity or cleanliness is compromised. Which instruments are compatible with this cover? Compatibility is for bench scales in the 440 series with a weighing surface dimension of 150 x 170 mm; the SKU 440-530-002S05 identifies the correct accessory. How does the cover help with maintenance routines? Using the cover reduces direct contamination of the keyboard and housing, lowering the need for deep cleaning and protecting sensitive controls from wear. Does the cover affect measurement accuracy? The cover protects external controls and casing only and does not interfere with the internal weighing mechanism when correctly fitted for 150 x 170 mm models. Is this product supplied by a reputable distributor? The accessory is supplied through established channels and is listed under KERN SKU 440-530-002S05 for traceability and easy reordering. Metav Werkzeuge — Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271

Take advantage of the combination of OIML class M2 accuracy, a 5 kg nominal value and a robust coated cast-iron block design for reliable, routine calibration in production and quality control. Order the ECO block weight (Class M2) directly via Metav Werkzeuge or ask our consultants if needed. ECO block weight (Class M2) — 5 kg calibration weight, coated cast iron, KERN The ECO block weight (Class M2) is a compact, coated cast-iron reference mass designed for routine verification and calibration of industrial scales and balances in workshops and testing labs. OIML class M2 certified reference mass 5 kg nominal value for routine calibration Coated cast-iron construction for durability Compact block design for stable placement Accurate reference mass for routine verification The ECO block weight is supplied as an OIML class M2 reference mass, offering a 5 kg nominal value with an OIML tolerance of 800 mg. This classification indicates suitability for routine verifications and internal calibrations where mid-grade metrological performance is required. Using a calibrated reference mass with known tolerance reduces measurement uncertainty in daily checks and supports repeatable results. The KERN designation and standardised identifiers ensure reproducibility within quality assurance processes and simplify documentation for inspection records. Durable construction for workshop use Manufactured from coated cast iron, the block design combines mechanical stability with surface protection, reducing wear and susceptibility to corrosion in typical workshop environments. The compact Block Eco design permits secure placement on a weighing pan and minimises tipping or dust accumulation, which helps preserve long-term accuracy. A coated finish decreases maintenance needs and extends service life, so calibration intervals remain predictable and downtime for replacement is reduced. Traceability and easy integration into workflows Clear identifiers and classifications support inventory and compliance management: the unit is supplied with a unique GTIN and SKU for unambiguous traceability, and origin data is recorded for customs and documentation. The reference mass is intended for use in production lines, incoming goods inspection and routine lab checks where documented evidence of calibration steps is required. Labelling and standardised specifications make the mass straightforward to register in quality systems and link to calibration certificates where applicable. For robust, traceable calibration masses from KERN, contact Metav Werkzeuge in Emmerich for tailored advice and rapid dispatch — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 356 Manufacturer: KERN SKU: 356-76 GTIN: 4045761241756 Facts Nominal value: 5 kg OIML tolerance: 800 mg OIML class: M2 Tariff code: 84239090 ECLASS: 32120103 Special features Material: Coated cast iron Design: Block Eco Category: Calibration weight (Prüfgewichte) Origin: CN FAQ What applications is this reference mass suitable for? The KERN ECO block weight (Class M2) is suitable for routine verification, internal calibrations and quality checks of industrial scales and balances where mid-level metrological requirements apply. How precise is the 5 kg calibration mass? The mass conforms to OIML class M2 with an OIML tolerance of 800 mg, which defines its admissible deviation for routine calibration tasks. What material and design features improve durability? A coated cast-iron construction and compact block form provide mechanical robustness and surface protection, reducing wear in workshop environments and supporting stable placement on weighing pans. Is the product traceable for quality management systems? Yes, the unit is supplied with a GTIN and SKU, enabling clear inventory tracking and straightforward linkage to calibration records within quality management workflows. Can this weight be used in production and laboratory environments? The ECO block weight is intended for use in production lines, inspection stations and test labs for routine checks and internal calibrations where OIML M2 specification is appropriate. Metav Werkzeuge — Emmerich am Rhein, Germany — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Conflicting product data detected: the battery runtime is listed as "up to 10h without backlight" and also as "20h runtime", which is inconsistent. This discrepancy in the provided information creates confusion and makes it difficult to generate a reliable product description. Accurate and consistent data is essential for creating a clear and trustworthy overview of the product's features and performance. Without clarification or further details to resolve these conflicting runtime specifications, it is not possible to ensure the accuracy of the description or provide potential customers with the necessary information to make an informed decision about the product.

Reliable 9 V / 300 mA output combined with a 100–240 V universal input and interchangeable international plug adapters supports uninterrupted use across workshops and while travelling; the compact, lightweight design keeps bench space clear and simplifies storage. Order the KERN YKA-03N directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN YKA-03N — Universal external power adapter with 9 V / 300 mA output and multi‑plug set The KERN YKA-03N is a compact universal external power adapter designed for scales and precision instruments, providing a steady 9 V / 300 mA supply and interchangeable plugs for EU, UK, US and CH mains sockets. Universal input 100–240 V, 50/60 Hz Stable 9 V DC output at 300 mA Interchangeable EU/UK/US/CH plug adapters Compact and lightweight, approx. 0.08 kg Reliable compatibility for mixed‑fleet workshops The adapter offers true international compatibility, accepting 100–240 V at 50/60 Hz, which eliminates the need for separate supplies when using instruments across different regions. This wide input range reduces logistic complexity for service technicians and procurement teams, ensuring the same power solution can be used for a variety of precision devices. The result is fewer inventory items and a more consistent power profile for bench‑level equipment. Practical plug set and travel convenience Delivered with interchangeable EU/UK/US/CH plug adapters, the unit supports rapid redeployment in different markets without additional accessories. The compact casing and lightweight construction (approx. 0.08 kg) make it suited to mobile test benches and field service kits. For applications that require frequent relocation of instruments, the adapter provides a tidy, portable option that minimises downtime and transport costs. Stable supply for sensitive measuring devices Designed as an external power source for scales and similar measuring equipment, the adapter supplies 9 V at 300 mA, matching common input requirements for precision instruments. The consistent voltage and current specification helps to maintain measurement stability and reduces the risk of fluctuations that can affect calibration results. This makes the unit appropriate for laboratory benches, inspection rooms and industrial scales where repeatable readings are essential. Clear integration into workshop supply chains As a universal external adapter, the device integrates easily with existing instrument fleets and cabling standards. The compact footprint frees up bench space, while the included plug set avoids compatibility delays when deploying equipment to different countries. For purchasing departments, the standardised specification simplifies procurement and stock management, supporting smoother operations and fewer interruptions. Choose the KERN YKA-03N for dependable international compatibility and contact Metav Werkzeuge in Emmerich for personalised advice and fast dispatch—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKA-03N Manufacturer: KERN GTIN: 4045761210431 Country of origin: CN Commodity code: 85044090 Core technical data Input voltage: 100–240 V, 50 / 60 Hz Output: 9 V DC, 300 mA Weight: approx. 0.08 kg Special features External universal power adapter for scales and precision instruments Interchangeable plug adapters included: CH, EURO, UK, US Compact form factor for bench and mobile use FAQ Is this adapter suitable for KERN scales and other precision instruments? The KERN YKA-03N is intended as an external power supply for KERN scales and comparable precision instruments that require a 9 V / 300 mA input. Which plug types are included with the adapter? The delivery scope for the adapter includes interchangeable plug adapters for EU, UK, US and CH mains sockets to support international use. Can the adapter be used worldwide without a separate voltage converter? Yes. The universal input of 100–240 V, 50/60 Hz enables operation across standard mains voltages without an additional converter. How portable is the unit for field service work? With a compact design and a weight of approximately 0.08 kg, the adapter is well suited to mobile toolkits and service engineers who require a lightweight power option. What is the exact model designation to order or reference? Refer to the SKU YKA-03N and manufacturer KERN when ordering or checking compatibility. KERN — Origin: China; SKU: YKA-03N; GTIN: 4045761210431