240g Precision Caliper Scale, 0.001g Readability, Stainless Steel Pan, DMS Sensor, IoT-Ready, Ring Windshield - KERN

Take advantage of a draft shield that improves weighing consistency and offers effortless access: the combination of three sliding doors and precise compatibility with KERN precision balances ensures stable results and smooth workflow. Order the Large Glass Draft Shield directly via Metav Werkzeuge or ask our consultants for compatibility advice and fast dispatch. Large Glass Draft Shield 572-A05 — KERN accessory with three sliding doors for easy sample access Large Glass Draft Shield 572-A05 is a glass enclosure designed to shield weighing pan assemblies from air currents while allowing convenient handling through its sliding doors. Three sliding doors for easy access Compatible with KERN 572, PKP and PKT Ø106 mm Reduces influence of drafts for stable weighing Lightweight at 0.5 kg for easy handling Consistent results through effective draught protection A well‑designed draft shield is essential for achieving reproducible readings on high‑precision balances. The enclosure reduces air disturbances that can cause fluctuation during measurement, supporting stable weighing and more reliable data logging. Its dimensions (150 x 140 x 130 mm) ensure adequate enclosure volume for common samples while keeping the disturbance zone small, which is particularly beneficial when working with analytical or precision balances. Compatibility with the specified KERN models means the shield integrates into existing measuring routines without altering calibration procedures, helping to maintain traceability and measurement confidence. Faster handling with three sliding doors Access to the weighing pan is simplified by the three sliding doors, which permit quick placement and removal of samples from multiple sides without lifting the entire enclosure. This design reduces handling time and the risk of introducing additional air movement during sample transfer, improving throughput in busy laboratory or workshop environments. The compact footprint and lightweight construction (0.5 kg) allow easy positioning and temporary removal when necessary, supporting flexible workflows where the enclosure is shared between stations or needs frequent repositioning. Practical compatibility and straightforward maintenance The shield is tailored for balance platforms with a pan diameter of Ø106 mm, fitting KERN 572 series and compatible PKP and PKT models that use that pan size. Installation is deliberately uncomplicated: the enclosure mounts around the weighing area to preserve the original balance geometry and does not require modification of the instrument. Cleaning is straightforward thanks to the glass surfaces, which maintain visual contact with the pan and sample throughout the weighing process; regular, gentle cleaning preserves visibility and prevents contamination. Overall, the enclosure offers a pragmatic balance of accessibility, protection and integration for professional measurement tasks. Contact Metav Werkzeuge for compatibility checks and fast dispatch from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 572-A05 SKU: 572-A05 GTIN: 4045761076587 Manufacturer: KERN Country of origin: DE Customs tariff number: 90160090 ECLASS: 22330605 Core specifications Dimensions: 150 x 140 x 130 mm Weight: 0.5 kg Special features Three sliding doors for convenient access Fits precision balances with weighing pan Ø106 mm Designed as a large glass draft shield for stable measurements FAQ Is this enclosure compatible with KERN analytical balances? The Large Glass Draft Shield 572-A05 is compatible with KERN 572 series and with KERN PKP and PKT models that use a weighing pan of Ø106 mm. Can the glass shield be used with larger pans? The enclosure is designed for pans with Ø106 mm and may not fit larger pan sizes; for other pan diameters an alternative enclosure is required. How does the draft shield affect measurement stability? By limiting air currents around the weighing pan, the draft shield reduces fluctuations and supports stable weighing, improving repeatability for small or lightweight samples. Is the enclosure easy to clean and maintain? Yes. The glass surfaces allow clear visibility and can be cleaned with suitable non‑abrasive agents to avoid scratches and contamination. Does the product include mounting hardware? The Large Glass Draft Shield 572-A05 is supplied as the enclosure unit; check the balance model compatibility (Ø106 mm) before integration with the instrument KERN — Germany; Contact: not specified

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Take advantage of OIML Class F1 accuracy and a compact 200 g nominal mass combined with a corrosion‑resistant polished stainless steel Eco‑Form to ensure reliable scale verification; order the calibration weight directly via Metav Werkzeuge or consult our specialists for technical advice. KERN 326-08 calibration weight — 200 g, OIML Class F1, polished stainless steel The KERN 326-08 is a single calibration weight for precise verification of balances and scales in laboratories and industrial workshops. OIML Class F1 accuracy Nominal mass 200 g Polished stainless steel Eco‑Form Legal accuracy that supports compliant measurement routines A calibration weight in OIML Class F1 delivers tight tolerances for routine verification and internal control checks. The certified tolerance of 1 mg ensures that balances used for quality control or internal traceability remain within legally recognised limits. By choosing an OIML‑rated standard, the metrological base for measurements is strengthened, reducing the risk of out‑of‑tolerance results and helping maintain consistent production quality. Robust materials for frequent handling and long service life Constructed from polished stainless steel in an ergonomic Eco‑Form, this single mass resists corrosion and surface wear during regular use. The compact cylindrical profile (approx. 28×47 mm) combines ease of handling with stable centre of gravity for repeatable placement on pans. These material and form choices reduce the need for frequent refurbishment while preserving the calibrated mass value over time, supporting uninterrupted verification cycles in busy environments. Simple integration into laboratory and workshop procedures The compact 200 g nominal value and standardised geometry make this weight suitable for verification of a wide range of laboratory and industrial balances. The single‑mass format is ideal for spot checks, routine internal calibration and comparison measurements. Clear identification (manufacturer KERN, SKU 326-08, GTIN 4045761223677) supports inventory control and traceability within calibration records without adding administrative complexity. Practical benefits for procurement and daily use Selecting a robust, certified calibration weight streamlines audit preparation and daily quality assurance. The Eco‑Form design facilitates safe storage and handling, while the stainless finish is easy to clean and inspect for contamination. For operations seeking dependable, low‑maintenance standards, this single weight balances metrological performance with practical usability, helping to sustain measurement confidence across the workflow. Contact Metav Werkzeuge in Emmerich for tailored advice on KERN calibration weights — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Nominal value 200 g Tolerance 1 mg OIML Class F1 Manufacturer KERN SKU 326-08 GTIN 4045761223677 Dimensions & numbers Cylinder dimensions 28×47 mm Mass 0.200 kg Harmonised system code 84239090 Country of origin DE Material & special features Polished stainless steel Eco‑Form design Single calibration weight for scale verification FAQ What level of accuracy does this calibration weight provide? The KERN 326-08 calibration weight is OIML Class F1 with a tolerance of 1 mg, suitable for precise routine verification and internal checks. Is the weight suitable for regular workshop use? Yes, the polished stainless steel construction and Eco‑Form shape make the weight durable for frequent handling in both laboratory and workshop environments. How does the 200 g nominal mass integrate with balance checks? A 200 g nominal mass is a common reference value for verifying medium‑range balances; the KERN 326-08 supports fast spot checks and traceable routine calibration. Can this weight be added to existing calibration records? Yes, the weight’s identification (KERN, SKU 326-08, GTIN 4045761223677) facilitates registration in calibration logs and inventory systems for traceability. What is the legal conformity for measurements using this weight? As an OIML Class F1 standard, this weight provides conformity suitable for internal verification and many regulatory quality procedures. KERN — Germany

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271