120 g Precision Analytical Balance Single-Cell Weighing System 0.00001 g/0.0001 g Readability, Internal Calibration - KERN

Combine reliable RS-232 connectivity, a practical 1.5 m cable length and direct compatibility with multiple KERN balance models for uninterrupted data capture; order via Metav Werkzeuge or consult our experts for seamless integration. Interface cable 770-926 – RS-232 connection cable, 1.5 m (KERN) The Interface cable 770-926 is an RS-232 lead for connecting KERN scales and balances to external devices, enabling straightforward serial data transfer in laboratory and workshop environments RS-232 interface for reliable data transfer Cable length approx. 1.5 m for flexible routing Compatible with KERN ABJ, ABS, ABT, PBS, PBJ Dependable serial communication for measurement data The RS-232 standard is a widely used method for serial communication between weighing instruments and peripheral systems; this interface cable supports stable signal transmission for recorded values and control commands. By providing a standardised physical connection to external devices such as data loggers, printers or PCs, the cable minimises interruptions in automated workflows and supports traceable data handling, which is essential in quality assurance and process documentation. Practical length and lightweight design for workshop use A cable length of approx. 1.5 m offers a useful balance between reach and neat routing on workbenches or in small measurement stations. The lead’s low weight and compact construction reduce strain on connectors and help maintain tidy installations in busy production or inspection areas. This practical configuration contributes to efficient bench layouts and reduces the time spent on setup, improving overall operational throughput. Fast integration with KERN balances and clear compatibility Designed specifically for KERN models ABJ, ABS, ABT, PBS and PBJ, the 770-926 interface cable simplifies system integration by matching connector and signalling requirements of the listed balances. The clear compatibility reduces commissioning effort and supports reliable data export from scales into existing quality-control or inventory systems, helping to maintain continuous measurement records without complex conversions. Contact Metav Werkzeuge in Emmerich for availability, technical details or purchasing advice on the KERN 770-926 interface cable: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 770-926 Manufacturer: KERN GTIN: 4045761014824 Country of origin: DE Core data Cable length: approx. 1.5 m Weight: 0.08 kg Tariff number: 84239010 Compatibility & features Interface: RS-232 Compatible models: KERN ABJ, ABS, ABT, PBS, PBJ Category: Accessories for scales FAQ Is this cable suitable for connecting a KERN balance to a PC serial port? The interface cable 770-926 uses the RS-232 standard and is intended for serial connections between KERN balances and external devices such as PCs or printers that accept RS-232 signals. Which KERN models are explicitly supported by this cable? Compatibility is specified for KERN models ABJ, ABS, ABT, PBS and PBJ; these models match the connector and signalling used by the 770-926 cable. What is the cable length and how does it affect installation? The cable length is approximately 1.5 m, providing sufficient reach for bench-top setups while keeping cable routing compact and manageable in laboratory or workshop layouts. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of a reliable RS-232 connection and a flexible 1.5 m lead to simplify data transfer from analytical balances; the compact, lightweight design supports tidy installation and straightforward integration. Order the ACS-A01 interface cable directly via Metav Werkzeuge or ask our consultants if needed. ACS-A01 Interface Cable — RS-232 connection for KERN analytical balances, approx. 1.5 m The ACS-A01 is an RS-232 interface cable designed to connect KERN analytical balances to external devices for stable serial data transfer in laboratory and workshop environments RS-232 serial interface for reliable data transfer Approx. 1.5 m cable for flexible positioning Compatible with KERN ACS/ACJ and ABS-N/ABJ‑NM Plug-and-play connection, ready for immediate use Ensure dependable serial communication for measurement workflows The RS-232 standard remains a proven solution for instrument-to-PC and instrument-to-printer connections where consistent timing and simple protocol handling are required. This interface lead offers serial communication that reduces manual transcription and supports automated logging, which in turn improves data integrity for audits and quality records. With a pragmatic focus on compatibility and straightforward wiring, the cable contributes to more efficient measurement routines and fewer interruptions in production or laboratory work. Integrate existing balances quickly and with minimal setup Designed for use with KERN ACS/ACJ and ABS-N/ABJ-NM series, the interface lead shortens commissioning times by avoiding complex adapters or configuration. The 1.5 m length allows flexible positioning between bench instruments and data receivers while avoiding excessive cable slack. The plug-and-play characteristic supports rapid deployment in environments that demand reliable throughput—this means less downtime and faster transfer of weighing results into processing or reporting systems. Compact and practical design for everyday use Weighing only about 0.1 kg, the cable is compact enough for neat cable management and convenient storage when not in use. The design minimises clutter on instrument benches and simplifies routing in confined laboratory layouts. While remaining unobtrusive, the lead provides a direct physical link that supports continuous measurement operations and contributes to a professional, organised workspace. Reduce errors and strengthen traceability Reliable electronic transfer of balance readings helps to close the gap between measurement and documentation. By eliminating handwritten entries and enabling direct data capture, the interface lead supports better traceability and faster error detection. For regulated environments or quality-controlled production, the consistent transfer enabled by this RS-232 cable forms a small but vital part of maintaining process reliability and documented compliance. For professional integration or procurement of the KERN ACS-A01 interface cable, contact Metav Werkzeuge for ordering and technical advice — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: ACS SKU: ACS-A01 Manufacturer: KERN Interface: RS-232 Cable length: approx. 1.5 m Weight: 0.1 kg Suitable for analytical balances: KERN ACS/ACJ, KERN ABS-N/ABJ-NM GTIN: 4045761124219 Facts ECLASS: 19050112 Tariff number: 90160090 Origin: PH Special features Plug-and-play connection Compact, lightweight lead Designed for laboratory and workshop use FAQ What devices is this cable compatible with? The cable is compatible with KERN ACS/ACJ and ABS-N/ABJ-NM analytical balances and provides a standard RS-232 connection for these models. Can the ACS-A01 be used to connect a balance to a PC? Yes, the ACS-A01 interface cable supports serial connection to PCs and printers that accept RS-232 input for direct data transfer. How long is the cable and is it easy to route? The lead is approximately 1.5 m long and lightweight (around 0.1 kg), which makes it suitable for typical bench routing and neat cable management. Does the cable require additional drivers or software? The ACS-A01 provides a plug-and-play RS-232 connection; specific software requirements depend on the receiving device and data-logging setup. KERN — origin: PH; GTIN: 4045761124219; SKU: ACS-A01

Take advantage of the lightweight aluminium construction and the integrated pour spout for clean, efficient transfer of small items; its minimal tare impact and compact handling support a smooth weighing routine. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Gemstone Pan AEJ-A05 — Aluminium weighing accessory with pour spout (KERN) The Gemstone Pan AEJ-A05 is a compact aluminium weighing accessory designed for precise small-part weighing on jeweller’s and laboratory scales, featuring a practical pour spout for controlled transfer. Lightweight aluminium design Integrated pour spout for safe transfer Accessory for weighing scales Compact, low-tare handling Improved handling for small and valuable items The aluminium construction of this accessory gives a favourable balance between sturdiness and low mass, reducing the influence on tare and allowing more consistent results when measuring small quantities. The integrated pour spout simplifies the transfer of beads, stones or other small components into vessels or containers, cutting handling time and minimising spillage. This makes the accessory particularly well suited where repeatable, time-efficient weighing is required. Designed for routine use in workshops and labs As a dedicated weighing accessory from KERN, the design supports frequent use in jewellers’ benches, quality-control benches and laboratory settings. The material choice—aluminium—ensures straightforward maintenance and keeps the accessory light during repeated handling operations. Used in combination with compatible scales, this pan assists reliable batch handling and rapid processing of small items, enhancing overall workflow efficiency. Compact form and user-friendly operation Weighing just 0.01 kg, the AEJ-A05 is easy to position on balance pans and to manoeuvre for precise placement and removal. Its compact profile reduces clutter on the weighing platform while the pour spout ensures controlled discharge of contents into preparation vessels or sample holders. The result is less rework and faster cycle times when preparing samples or sorting gemstones for inspection. Order the KERN AEJ-A05 through Metav Werkzeuge for a dependable, lightweight weighing accessory and consult our Emmerich team for application advice Technical data Article number: AEJ SKU: AEJ-A05 Manufacturer: KERN Country of origin: PL Core specifications Weight: 0.01 kg Eclass: 20180290 Tariff code: 90160090 GTIN: 4045761181885 Materials and features Aluminium Practical pour spout Accessory for weighing scales Product group: pans FAQ What material is the pan made of? The KERN AEJ-A05 is manufactured from aluminium, chosen for its light weight and suitability as a weighing accessory. Is the pan suitable for weighing gemstones and similar small parts? Yes. The AEJ-A05 is designed as an accessory for scales and is especially suitable for small, valuable items such as gemstones where careful transfer is important. What identifiers and codes belong to this product? The item is listed as SKU AEJ-A05 with GTIN 4045761181885 and eClass 20180290. Where is this weighing pan produced? Production origin is listed as Poland (PL), and the accessory is supplied under the KERN brand. KERN — Origin: Poland — GTIN: 4045761181885

Take advantage of a lightweight protective hood compatible with KERN ABT.100-5NM and supplied as a pack of five to keep weighing stations free from dust and contaminants; simple replacement reduces downtime and supports consistent measurement results. Order directly via Metav Werkzeuge or consult our technical advisers for further details. Protective hood ABT-A02S05 for KERN scales — pack of five, lightweight Protective hood ABT-A02S05 designed as a practical accessory for KERN ABT.100-5NM weighing instruments, offering basic protection in workshop and industrial environments Pack of five protective hoods Compatible with ABT.100-5NM scales Lightweight, 0.02 kg each Rapid dispatch from Metav stock Maintain measurement stability with simple protection A small but effective accessory, the protective hood reduces exposure of the weighing area to airborne particles and incidental splashes that can cause measurement deviations. By limiting contamination, the cover helps to minimise calibration drift and supports reproducible readings in daily operations. Its low mass (approx. 0.02 kg per item) means the hood can be fitted and removed without affecting the balance or requiring recalibration procedures, preserving workflow efficiency. Practical supply and easy replacement to cut downtime Supplied as a pack of five, the accessory provides a ready rotation of replacements for routine use or multi-shift environments. This arrangement simplifies stock planning for workshops and metrology departments and reduces the frequency of procurement cycles. As a dedicated accessory for the KERN ABT.100-5NM family of scales, the hood allows maintenance teams to perform quick swaps during scheduled checks, keeping instruments operational and reducing unplanned interruptions. Designed for workshop hygiene and equipment longevity In environments where dust, fibres or incidental residues are present, a protective cover contributes to a cleaner weighing station and less frequent cleaning of sensitive components. The accessory supports a hygienic workplace and can help extend the service intervals of the instrument by protecting vulnerable surfaces. Manufactured in the Philippines and delivered in compact packs, the product meets the practical needs of production floors and quality-control labs seeking low-effort protection for precision equipment. For reliable protection of KERN scales and straightforward replenishment, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request advice. Technical Data SKU: ABT-A02S05 GTIN: 4045761185449 Manufacturer: KERN Origin: PH Facts Net weight: 0.02 kg Commodity code: 39269097 eClass: 24322502 Special features Pack contents: 5 pieces Intended for: ABT.100-5NM scales Category: Scales accessories Product group: Protective hoods FAQ What is included in the ABT-A02S05 package? The ABT-A02S05 is supplied as a pack of five protective hoods intended for use with KERN weighing instruments. Is the hood compatible with my ABT.100-5NM scale? Yes, the protective hood is designed specifically for the KERN ABT.100-5NM model and fits the weighing station as an accessory. Will fitting the hood affect scale accuracy? The lightweight construction (approx. 0.02 kg per hood) is intended to be non-intrusive and should not affect the balance when applied or removed under normal use. Where is the product manufactured? The ABT-A02S05 protective hood is manufactured in the Philippines. Manufacturer: KERN — Origin: PH

Benefit from electrostatic neutralisation and a compact, adjustable design for consistent, gram‑accurate results in precision weighing; the device’s low ozone output adds safety while keeping air quality within typical laboratory tolerances. Order the ioniser directly via Metav Werkzeuge or ask our consultants for application advice. KERN YBI-01A Ioniser — neutralises electrostatic charge, low ozone emission The KERN YBI-01A ioniser is a compact device for neutralising electrostatic charge on non-conductive weighing items beside precision balances and laboratory scales, enabling more reliable milligram‑level results. Neutralises static charge for precise weighing Low ozone emission 0.05 ppm/h Compact 115 x 110 x 80 mm footprint Adjustable feet or handheld targeting Achieve repeatable, gram‑accurate weighing through targeted electrostatic neutralisation Electrostatic charge on non-conductive materials such as plastic, porcelain or glass can create an electromagnetic field between the sample and the balance, leading to measurement errors that may reach the gram scale. The ioniser removes residual charge by producing a balanced stream of positive and negative ions, allowing the balance to register the true mass without drift or attraction. This results in fewer retests, reduced sample handling and higher process throughput — a clear efficiency gain for laboratories and quality control stations that demand reproducible micro‑ and milligram results. The effect is particularly noticeable when handling light or small parts where even slight electrostatic influence can distort the outcome. Flexible positioning for bench integration and targeted use Designed for easy placement, the unit fits beside most laboratory balances thanks to its compact dimensions and low weight. It can be set on adjustable feet for stable bench mounting or used handheld to address critical points on awkwardly shaped components. The small footprint allows integration without altering the weighing workflow, and the option for targeted ionisation supports fast intervention during sample preparation. These features make it suitable for production benches, research labs and trade environments where space is limited but measurement integrity is essential. Safe, straightforward operation compatible with international mains supplies Operation is straightforward: the device runs from a plug‑in power supply that accepts 100–240 V input and is supplied with adapters for AUS, CH, EURO, UK and US sockets, ensuring compatibility in multi‑site operations. With an ozone emission of 0.05 ppm/h, the unit maintains low by‑product levels, supporting safe use in laboratory environments when normal ventilation procedures are followed. Lightweight and portable, the unit requires minimal setup and little maintenance, delivering a practical static‑control solution that complements established weighing equipment and standard operating procedures. Contact Metav Werkzeuge for tailored advice on integrating the KERN YBI-01A ioniser into existing weighing processes or to request application guidance from our specialists in Emmerich Technical data Article number: YBI-01A Manufacturer: KERN GTIN: 4045761194984 Country of origin: Italy Core specifications Dimensions: 115 x 110 x 80 mm Weight: 0.44 kg Input voltage: 100 V - 240 V Ozone emission: 0.05 ppm/h Tariff code: 90160090 Features & compatibility For non-conductive weighing items: plastic, porcelain, glass Placement: adjustable feet or handheld targeting Power supply: adapters included for AUS; CH; EURO; UK; US Power supply type: plug-in power supply eClass: 17111116 FAQ How does the ioniser prevent weighing errors caused by static charge? The device neutralises electrostatic charge by emitting a balanced flow of positive and negative ions; this reduces the electromagnetic interaction between sample and balance and stabilises readings when using the KERN YBI-01A ioniser. Can this device be used with all types of laboratory balances? Yes; the static eliminator is intended for use beside precision balances and scales, particularly where non-conductive materials are weighed and electrostatic effects are a known issue. Is the ozone emission of the unit safe for laboratory use? The ioniser has a measured ozone emission of 0.05 ppm/h, a low level suitable for normal laboratory operation when standard ventilation practices are observed. What power connections are supplied with the unit? A plug‑in power supply accepting 100–240 V is provided, together with adapters for AUS, CH, EURO, UK and US sockets to facilitate use across multiple sites. Will the unit reduce the need for re‑weighing and sample handling? By neutralising charge on light and non-conductive samples, the device reduces measurement drift and attraction errors, which in turn lowers the frequency of retests and extra handling. Manufacturer: KERN — Address: not specified — Contact: not specified

Take advantage of electrostatic neutralisation, flexible placement and seamless rear-panel integration to secure reliable milligram results and reduce reweighs. Order the unit directly via Metav Werkzeuge or contact our consultants for advice on fitting and compatibility. ABP-A01 — KERN windscreen back panel with integrated ioniser for precision balances The ABP-A01 is a windscreen back panel with an integrated ioniser that neutralises electrostatic charges during fine weighing, designed for laboratory and industrial balance applications. Neutralises electrostatic charge for precise weighing Integrated ioniser for compact rear-panel fitting Positionable with stand or handheld operation Reduces weighing errors in milligram range Achieve milligram accuracy by removing electrostatic influence Electrostatic charging on non-conductive samples creates a small electromagnetic field between the sample and the balance, which can distort results by grams or milligrams. The ABP-A01 uses a controlled ioniser function to neutralise that charge, stabilising the measurement environment and enabling precision weighing even with lightweight specimens. This direct reduction of measurement variability supports reproducible results and fewer repeat measurements, improving throughput and reducing material waste. Flexible placement that adapts to existing workflows The design allows the ioniser to be placed beside the balance using a stand or directed by hand for targeted neutralisation, giving operators flexibility during routine tasks. When ordered together with compatible models in the ABP series, professional rear-panel integration is offered to fit the unit cleanly into the balance enclosure, preserving the bench layout and minimising interference. The combination of portability and fixed integration supports a smooth workflow between bench tasks and analytical routines. Straightforward compatibility and simple function explanation Installation and operation are deliberately simple: the module neutralises charged particles near the weighing chamber so technicians need not alter weighing technique. Where rear-panel fitting is requested, the ABP-A01 is prepared for professional integration with ABP-series balances, ensuring correct alignment and electrical routing. The result is an unobtrusive addition to the setup that delivers consistent repeatability without complex adjustments. Designed for common non-conductive samples and routine use Materials such as plastic, porcelain and glass are particularly prone to electrostatic charging; the ABP-A01 is specified to address these cases and to support routine quality control and laboratory analysis. Built to be a compact and practical accessory, it complements balances used in analytical laboratories, quality departments and technical workshops where reliable low-mass measurement is essential. The accessory’s features focus on measurable benefits: fewer reweighs, clearer data and a more efficient weighing process. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN ABP-A01 into existing balances — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitting options and supply Technical data Article number: ABP-A01 Manufacturer: KERN GTIN: 4045761213975 SKU: ABP-A01 Weight: 0.85 kg Country of origin: PH Tariff code: 90160090 Category: Waagen > Zubehör eClass: 22330605 Core specifications Weight: 0.85 kg GTIN: 4045761213975 Tariff code: 90160090 eClass: 22330605 Special features Integrated ioniser for electrostatic neutralisation Suitable for non-conductive weighing goods (plastic, porcelain, glass) Placement: stand or handheld operation Option: rear-panel fitting with ABP series balances (service integration) Rapid dispatch from webshop FAQ How does the ioniser improve weighing accuracy? The ABP-A01 neutralises electrostatic charges that create fields between non-conductive samples and the balance, reducing measurement deviation and improving stability in the milligram range. Can the ioniser be fitted to existing ABP-series balances? Yes; when ordered in combination with an ABP-series model, the ABP-A01 can be professionally integrated into the rear panel to ensure a neat fit and correct alignment. Which sample types benefit most from the ioniser? Non-conductive materials such as plastic, porcelain and glass are most affected by static charge; the ABP-A01 is specified to reduce those effects and improve repeatability. Is the unit suitable for routine quality-control weighing? The ABP-A01 provides consistent neutralisation and supports repeatable weighing procedures, making it appropriate for routine QC and analytical tasks. Manufacturer: KERN — Address: Philippines — Contact: via Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of a compact, standards-compliant accessory set that combines precise measurement support, easy handling and full compatibility with KERN analytical balances; order via Metav Werkzeuge or consult our specialists for tailored advice. Universal density set YDB-03 — density determination set for liquids and solids, DIN EN ISO 1183-1 compliant (KERN) The Universal density set YDB-03 is a complete accessory kit for precise density determination of liquids and solids on analytical balances, designed for laboratory and workshop quality control. Complete kit for liquid and solid density testing Compliant with DIN EN ISO 1183-1 testing wire Includes stainless steel 20 g sinker Suitable for all current KERN analytical balances Reliable results through standard‑compliant design The kit is built to deliver consistent, traceable density readings by meeting established testing practice. Compliance with DIN EN ISO 1183-1 and the specified 0.5 mm wire diameter for the immersion basket reduces measurement uncertainty when determining densities of non‑foamed plastics and similar materials. The standard conformity ensures that results are comparable across laboratories and that the procedure aligns with common quality assurance frameworks, making the set suitable for routine checks and documentation in production environments. Everything required for efficient and comfortable testing Designed as an all‑in‑one solution, the set contains a beaker (Ø×H 84×113 mm), thermometer, sample holder, adapter, counterweights, a stainless steel sinker (20 g) and a universal immersion basket for both floating and sinking specimens. These components reduce setup time and minimise handling errors, which in turn shortens the measurement cycle and improves throughput. The basket’s fine wire and the included sinker enable reliable immersion procedures for a wide range of materials, while the clear layout of accessories supports a reproducible workflow even for teams with varying experience. Seamless integration into analytical balance workflows Compatibility with KERN analytical balances ensures straightforward mounting and stable measurement conditions, preserving balance calibration and minimising re‑work. For applications requiring documented traceability, an optional DAkkS calibration certificate for the sinker is available, listing relevant density and volume data. The kit’s compact footprint and balanced weight distribution make it convenient for bench use and simple storage, supporting lean laboratory routines and steady sample throughput without compromising on measurement quality. Contact Metav Werkzeuge in Emmerich for expert advice and to secure the KERN accessory set for immediate integration into laboratory workflows Technical data Article number: YDB-03 Manufacturer: KERN GTIN: 4045761152908 Country of origin: Germany Facts Dimensions (beaker Ø×H): 84 × 113 mm Weight (set): 0.65 kg Sinker mass: 20 g Tension wire diameter: 0.5 mm Tariff number: 90160090 ECLASS: 32120490 Special features Includes: thermometer, sample holder, adapter, counterweights, stainless steel sinker (20 g) Universal immersion basket for floating and sinking solids Compliant with DIN EN ISO 1183-1 Suitable for all current KERN analytical balances Optional: sinker density determination, DAkkS calibration certificate (DKD) FAQ What is the set used for? The universal density set YDB-03 by KERN is intended for precise density determination of liquids and solids using analytical balances, suitable for laboratory and workshop quality checks. Is the immersion basket standard‑compliant? Yes. The immersion basket wire has a 0.5 mm diameter and complies with DIN EN ISO 1183-1, meeting the procedure requirements for density determination of non‑foamed plastics. What items are included in the delivery? Delivery comprises a beaker (Ø×H 84×113 mm), thermometer, sample holder, adapter, counterweights, a stainless steel 20 g sinker and a universal immersion basket for floating and sinking specimens. Can the set be used with existing KERN balances? The kit is designed to be compatible with all current KERN analytical balances and supports straightforward mounting and measurement routines. Is calibration available for traceability? An optional DAkkS calibration certificate is available for the sinker, providing documented values for density and volume where traceability is required. Manufacturer: KERN — Germany. Dealer contact: info@metav-werkzeuge.com | +49 2822 7131930