Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
WLAN Interface For Scales Not Retrofittable, KERN - KERN
Take advantage of wireless connectivity and a compact OEM design to streamline data capture from precision scales, reducing cable runs and manual entry. The module's low weight and clear technical identifiers simplify procurement and installation planning. Order the KIB-A10 via Metav Werkzeuge or consult our advisors for integration advice. KIB-A10 Wi‑Fi interface for scales by KERN The KIB-A10 is a compact Wi‑Fi interface module engineered to integrate KERN scales into wireless networks, enabling fast and reliable transfer of measurement data within production and laboratory environments. KERN KIB-A10 Wi‑Fi interface for scales Compact, lightweight module (0.02 kg) Enables wireless data transfer for lab systems Not retrofittable — direct OEM design Seamless wireless data capture for precision weighing A dedicated Wi‑Fi interface converts scale outputs into networked data streams, enabling automated logging and centralised process control without additional cabling. By replacing serial connections with a wireless link, production lines and testing benches benefit from reduced setup complexity and fewer mechanical failure points. The module supports streamlined data workflows, which contributes to faster traceability and a measurable reduction in manual transcription errors. Consistent performance through OEM integration Designed as an OEM accessory, the interface is not retrofittable, ensuring compatibility and electrical integrity when integrated at build time. The compact construction and 0.02 kg mass minimise mechanical load on instruments and simplify mounting. For procurement and asset tracking, the unit carries a unique GTIN and tariff classification, aiding inventory management and customs processing. The emphasis on fit-for-purpose design translates into dependable, long-term operation in industrial settings. Professional supply chain and practical benefits for workshops Delivered under the reputable KERN brand and available through Metav Werkzeuge, the module aligns with professional requirements for traceable, repeatable measurement processes. Metav’s role as a quality filter for the European market ensures secure supply and attentive order handling from Emmerich. For workshop managers and production engineers, the interface represents a practical way to modernise data capture: compact hardware, straightforward specification for system planners, and full identification for procurement documentation. For procurement or detailed integration guidance on the KERN KIB-A10 Wi‑Fi interface, contact Metav Werkzeuge — supply and technical information are available from our Emmerich hub via email or phone. Technical Data Article number: KIB-A10 Manufacturer: KERN GTIN: 4045761207684 Country of origin: CN Tariff code: 84239010 ECLASS: 19050112 Facts Weight: 0.02 kg Asset file size (image): 70,930 bytes SKU: KIB-A10 Special features Wireless interface (Wi‑Fi) Accessory for scales Not retrofittable OEM-designed module FAQ What types of scales is this interface compatible with? The interface is intended for integration with KERN scales and other weighing instruments that accept the module’s OEM connection; compatibility should be verified against the instrument’s specifications. Can the module be fitted to existing instruments after purchase? The module is specified as not retrofittable; the design assumes OEM installation during assembly to ensure correct electrical and mechanical integration. How does the KIB-A10 transmit recorded values? The unit transmits measured values over a Wi‑Fi network, converting the instrument’s output into networked data for logging or process-control systems. Is the module lightweight and easy to accommodate in designs? With a mass of 0.02 kg, the module is compact and imposes minimal mechanical load, aiding straightforward accommodation in instrument housings. What identifiers aid procurement and customs handling? The product is identified by GTIN 4045761207684 and tariff code 84239010, which support ordering, stock-keeping and customs documentation. Manufacturer: KERN Address: Country of origin CN Contact: GTIN 4045761207684
WLAN Interface for Weighing Systems Wireless Data Module, - KERN
Take advantage of the reliable combination of wireless connectivity and seamless integration for uninterrupted weighing workflows; benefit from rapid dispatch and Metav Werkzeuge's expertise when choosing this interface. KERN YKV-A01 Wi‑Fi interface for weighing systems — reliable wireless connectivity for scales The KERN YKV-A01 is a Wi‑Fi interface for weighing systems, designed to enable wireless data transfer and straightforward integration with laboratory and industrial scales. Wireless data transfer for weighing systems Stable connection for continuous measurements Easy integration with laboratory and industrial scales Rapid dispatch from Metav Werkzeuge Ensure continuous data flow with wireless integration The KERN interface converts a scale's output into a wireless stream, reducing manual logging and supporting automated workflows. By replacing serial or USB-only connections with a Wi‑Fi link, measurement data can be routed directly to networked PCs, databases or data-collection systems, improving process efficiency and traceability. This integration lowers the risk of transcription errors and speeds up data handling, which is particularly valuable in high-throughput or regulated environments where consistent recording is essential. Fast installation and dependable operation for daily use Designed as an accessory for established weighing devices, the interface focuses on reliability and uncomplicated setup. The straightforward connection approach minimises downtime during installation and supports uninterrupted measurement tasks once configured. Stable wireless performance ensures that continuous weighing processes remain accurate without frequent reconnections, so production and laboratory teams can maintain throughput and quality with minimal supervision. A practical choice for precision-focused workshops and labs As a dedicated accessory for scales, this Wi‑Fi interface complements existing measurement equipment and supports digital workflows in both industrial and laboratory settings. Procuring the interface through Metav Werkzeuge brings the advantage of a precision-oriented supplier that combines extensive range and dependable logistics. For operations aiming to modernise their data acquisition while keeping implementation practical and cost-effective, this accessory presents a focused solution that aligns with professional measuring routines. Choose the KERN Wi‑Fi interface for secure wireless weighing integration — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid dispatch Technical data Article number: YKV-A01 Manufacturer: KERN GTIN: 4045761228917 Country of origin: CN Tariff code: 90160090 Facts GTIN: 4045761228917 Tariff code: 90160090 Weight (kg): 0 eClass: 19050112 Special features Function: Wi‑Fi interface for weighing systems Application: Accessory for scales Distribution: Available via Metav Werkzeuge with rapid dispatch FAQ How does the interface transfer measurement data? The KERN YKV-A01 uses a Wi‑Fi connection to transmit measurement values from compatible scales to networked systems for centralised data collection. Which scales can work with this Wi‑Fi interface? Compatibility depends on the scale's communication ports and protocols; the interface is intended for use as an accessory with industrial and laboratory weighing systems. Is the product identifiable for ordering and inventory? Yes, the interface is listed under SKU YKV-A01 and GTIN 4045761228917 for clear identification. Can the interface support continuous measurement workflows? The device is designed to provide a stable wireless link suitable for ongoing weighing tasks and continuous data transfer. KERN — Country of origin: CN
WLAN Module Wireless Data Interface for Scales to Printer/PC Not Retrofitable - KERN
Take advantage of reliable wireless data transfer and a factory‑fitted design to streamline weighing workflows; the module ensures consistent, cable‑free communication between scales and peripherals while reducing manual entry errors. Order the KERN module directly via Metav Werkzeuge or ask our consultants for precise integration advice. KERN YMI‑A01 Wi‑Fi interface module for scales — wireless data interface The Wi‑Fi interface YMI‑A01 is a factory‑fitted data interface for KERN scales, enabling cable‑free transmission from the balance to printers, PCs and other peripherals in industrial and laboratory environments Wireless data transfer from scale to PC or printer Factory-fitted module, not retrofittable Compatible with KERN weighing peripherals Fast, cable-free integration into workflows Faster, cable‑free transfer that reduces process overhead The Wi‑Fi interface converts weighing results into a wireless data stream, eliminating repetitive manual entries and the need for serial cables. This leads to measurable time savings in data capture and fewer transcription mistakes, which improves throughput and traceability in production and quality control. The wireless connection supports straightforward automation of reporting and logging tasks, maintaining operational continuity during shift changes or peak workloads. Factory‑fitted construction for long‑term reliability As a factory‑fitted module from KERN, the YMI‑A01 is integrated into the instrument design to ensure stable performance and minimal service intervention. The non‑retrofitable configuration reduces the risk of loose connections and protects calibration integrity, providing a dependable solution for continuous weighing applications. This fixed installation is particularly suitable where uninterrupted data flow and certified accuracy are required. Seamless integration with peripherals and simplified documentation The wireless module links the balance directly with PC, printer and other peripherals, simplifying setup and reducing cabling clutter at the bench. Integration cuts administrative workload by enabling automated data capture for inventory, batch records and compliance documents, while enhancing data integrity through consistent output formats. The module is therefore beneficial for laboratories, production lines and retail weighing points that require efficient, auditable data handling. For detailed specification checks or to arrange supply from our Emmerich warehouse, contact Metav Werkzeuge about the KERN YMI‑A01 Wi‑Fi interface via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: YMI SKU: YMI-A01 Manufacturer: KERN GTIN: 4045761216310 Country of origin: CN Facts EClass: 19050112 Tariff code: 84239010 Special features Wireless data transmission from scale to PC, printer and other peripherals Not retrofittable (factory‑fitted) Category: Scales > Accessories FAQ Is the module suitable for retrofitting existing balances? No. The YMI‑A01 is a factory‑fitted Wi‑Fi interface and is not retrofittable; it is supplied as an integrated option for compatible KERN instruments. Which peripherals can be connected via the wireless interface? The wireless module supports data transmission to PC, printer and other weighing peripherals, enabling direct logging and printing of weighing results from the balance. How does the interface improve documentation and traceability? By automating the transfer of measured values, the module reduces manual transcription and ensures consistent output formats, which simplifies batch records, inventory logs and audit trails for regulated production environments. Who supplies and ships the module within Europe? Metav Werkzeuge supplies the KERN YMI‑A01 from its Emmerich facility, offering centralised stocking and distribution for reliable delivery to industrial and laboratory customers. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
Wägetisch
Der Wägetisch KERN YPS-03 ist dafür konstruiert, Erschütterungen und Schwingungen zu absorbieren, die sonst das Wägeergebnis verfälschen würden Der Wägetisch YPS-03 besteht aus: einer 24 kg schweren, polierten Granit-Steinplatte, die auf absorbierenden Gummielementen gelagert ist und als Standfläche für die Analysenwaage dient einem Arbeitstisch, dessen Arbeitsplatte die Steinplatte umschließt und viele Ablagemöglichkeiten bietet. Der stabile Aluminiumprofilrahmen verfügt über vier höhenverstellbare Stellfüße, mit deren Hilfe der Wägetisch bei etwaigen Bodenunebenheiten exakt nivelliert werden kann Am Wägetisch kann ergonomisch optimiert im Stehen oder bequem im Sitzen gearbeitet werden. Der Einlass an der Vorderseite des Tisches bietet genügend Platz für eine Sitzmöglichkeit und den Bediener der Waage ohne den Wägetisch zu berühren Alle Oberflächen sind hygienisch und leicht zu reinigen Passend für alle KERN Analysenwaagen mit Gesamtabmessungen ≤ 300 x 400 mm Gesamtabmessungen 785 x 600 x 800 mm (Höhe einstellbar) Abmessungen Granitplatte 300 x 400 x 80 mm Nettogewicht ca. 46 kg Versandbereit in 2 Tagen. Versand komplett auf Palette, einfache Eigenmontage. Maße, Bruttogewicht, Versandkosten bitte anfragen
YKI-03 WLAN Adapter 12–48V Incl. Power Supply, Network Cable, Driver CD - KERN
Take advantage of reliable wireless data transfer and a 12–48 V input combined with ready-to-use accessories for fast integration into weighing systems; the lightweight design (approx. 0.3 kg) keeps installation simple and reduces downtime. Order the interface directly via Metav Werkzeuge or contact our consultants for compatibility advice. WLAN adapter KERN YKI-03 — Wireless interface for industrial scales, 12–48 V input The WLAN adapter KERN YKI-03 is a compact wireless interface designed to connect weighing instruments to local networks, optimised for workshop and laboratory environments. 12–48 V input for flexible power sources Includes power adapter, 1 m network cable Plug‑and‑play driver CD for quick setup Lightweight: 0.3 kg for easy installation Seamless network integration for accurate weighing data The WLAN interface provides wireless connectivity to integrate scales with existing IT infrastructure, eliminating extended cable runs and enabling centralised data collection. With native support for networked data transfer, the module reduces manual recording and the risk of transcription errors, which improves traceability and speeds up reporting cycles. Compatibility with common weighing platforms ensures reliable transmission of measured values to back‑office systems or data loggers, supporting continuous production monitoring. Power flexibility and ready-to-use accessories for fast commissioning Equipped for a wide input range (12–48 V), the unit works with typical industrial power supplies and battery setups, allowing installation on different equipment without extra converters. The scope of delivery contains a power adapter, a 1 m network cable and a driver CD, enabling plug‑and‑play commissioning and shorter setup times. For teams with limited IT support, the included driver package and cabling minimise configuration steps, so the interface can be operational quickly and with predictable effort. Compact design that keeps workshops productive The interface’s compact footprint and approx. 0.3 kg weight make it straightforward to mount on or near weighing devices without adding significant load or requiring special supports. The small size contributes to tidy installations and easier handling during maintenance or relocations. Combined with dependable wireless operation, this lightweight module supports smoother workflows and less downtime, which contributes to consistent throughput and dependable measurement routines in busy production or lab environments. For tailored advice on integrating the KERN WLAN adapter into existing weighing equipment, contact Metav Werkzeuge in Emmerich — technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 to confirm compatibility and arrange prompt dispatch. Technical data Manufacturer: KERN SKU: YKI-03 ECLASS: 19170204 HS code: 84239010 Facts Input voltage: 12 V–48 V Weight: 0.3 kg Network cable length: 1 m Special features Included accessories: power adapter, 1 m network cable, driver CD Category: scales accessory Origin: CN FAQ Is the WLAN adapter compatible with all KERN scales? Compatibility depends on the scale model and communication interfaces; the WLAN adapter KERN YKI-03 is intended for KERN weighing systems with compatible data ports and standard network protocols. What is included with the adapter for installation? Delivery of the WLAN adapter KERN YKI-03 includes a power adapter, a 1 m network cable and a driver CD to support plug‑and‑play setup. What power supply is required for the unit? The unit accepts a 12–48 V input range; verify the supply voltage of the target weighing device before installation to ensure safe operation with the KERN YKI-03. How portable is the wireless interface for workshop use? At approximately 0.3 kg, the KERN YKI-03 is lightweight and easy to reposition, supporting flexible deployment across different workstations and laboratories. KERN — Origin: China. Address and direct manufacturer contact details not provided.
Zubehör für CR-Q1
Technical Data and Summary for KERN Zubehör :Manufacturer: KERNModel: ZubehörOrder your new Zubehör now Online!
Zubehör für CR.2000-3PI
Technical Data and Detail Information for KERN Zubehör für CR.2000-3PI :Manufacturer: KERNSeries: CE-PModel: ZubehörMaterial: rostfreier StahlZubehör quick and easy order Online!!
Zubehör für CR.250/500/1000-3P1
Technical Overview:Manufacturer: KERNSeries: CE-PModel: ZubehörMaterial: StahlAblesbarkeit:Order now Zubehör Online.
Öse and Hook for Underfloor Weighing, Fits KERN 572 Models - KERN
Secure and compact accessory for underfloor weighing: a lightweight eyelet and hook that ensures dependable load attachment and straightforward compatibility with KERN floor-scale models. Supplied as a single unit and weighing only 0.05 kg, it supports efficient workflow and simple inventory management; order the accessory directly via Metav Werkzeuge or ask our consultants if needed. Eyelet and Hook 572-A03 — Underfloor Weighing Accessory, KERN Compatible The Eyelet and Hook 572-A03 is an accessory for underfloor weighing systems that provides a secure attachment point for suspended loads on compatible KERN floor scales. For underfloor weighing systems Compatible with KERN 572 models Supplied as 1 piece Lightweight: 0.05 kg Secure attachment that reduces handling uncertainty The accessory offers a dedicated eyelet and hook solution tailored to underfloor weighing applications, enabling clear and repeatable load connections. By providing a defined connection point, the component reduces variable load positioning and contributes to more consistent weighing results. The compact design, at 0.05 kg, minimises inertia during handling and fits seamlessly into standard scale setups, making it practical for routine use in production, shipping and quality-control environments. Compatibility tailored to precision weighing Designed as an accessory for the KERN 572 product family, this hook and eyelet set is intended for use with floor scales that require a reliable method for hanging or suspending items. The component is suitable for models specified with a readability of 0.01 g, ensuring that the attachment method complements high-resolution measurement tasks. Compatibility with established scale models simplifies procurement and reduces the need for custom adaptors, supporting efficient integration into existing weighing stations. What is supplied and why it matters The delivery content is concise: 1 piece — an eyelet and a hook ready for immediate installation. A single, purpose-built unit keeps spare-parts lists short and simplifies stock management. For users less familiar with suspension attachments, the design offers a straightforward mechanical interface that clarifies how items should be hooked and prevents ad hoc solutions that can degrade measurement repeatability. Where tighter tolerances are required, using a specified accessory reduces unnecessary variability at the point of weighing. Contact Metav Werkzeuge for compatibility checks and fast dispatch from Emmerich; our consultants will advise on the KERN 572-A03 and its fit for specific floor-scale setups Technical data Article number: 572 SKU: 572-A03 Manufacturer: KERN Facts Weight: 0.05 kg Readability suitability: models with readability 0.01 g Special features Accessory for underfloor weighing Compatible with KERN 572 models Scope of delivery: 1 piece Segment: Accessories Product group: Hook FAQ What is the primary use of this accessory? The eyelet and hook 572-A03 (KERN accessory) is used for secure load attachment in underfloor weighing systems, providing a fixed point for suspended items. Which scales is it compatible with? Compatibility is defined for KERN 572 models; the 572-A03 is intended for those KERN floor scales that accept an external hook or eyelet accessory. Is the scope of delivery complete for immediate use? Yes. The scope of delivery for the KERN 572-A03 comprises 1 piece — the eyelet and hook — supplied ready for installation. What is the weight of the accessory? The KERN 572-A03 weighs 0.05 kg. Can it be used with high-resolution scales? The 572-A03 is suitable for models specified with a readability of 0.01 g, aligning the attachment method with precision weighing requirements. Manufacturer: KERN — Address: not provided — Contact: not provided
Öse für Unterflurwägungen
Technical Data:Manufacturer: KERNSeries: EGModel: PlugOrder now Plug Online.
Ø105mm Stainless Steel Weighing Pan For Precision Scale EMB Models - KERN
Take advantage of a stainless steel design and a precise fit for KERN EMB balances with a Ø105 mm platform to secure consistent weighing results; reliable material choice and compact weight simplify handling and maintenance. Order or request advice directly from Metav Werkzeuge for supply and technical guidance. Stainless steel weighing plate EMB-A02 — compatible with KERN EMB (Ø105 mm), corrosion-resistant The Stainless steel weighing plate EMB-A02 serves as a replacement or spare pan for KERN EMB precision balances, optimised for models with a 105 mm platform diameter and engineered for repeatable weighing in workshop and laboratory environments. Stainless steel construction Compatible with KERN EMB Ø105 mm Precision fit for reliable weighing Easy to clean, corrosion-resistant surface Consistent weighing performance for production and inspection The EMB-A02 attachment provides a stable contact surface that helps preserve the repeatability of the balance. Fitted to KERN EMB series models with a Ø105 mm platform, the accessory guarantees a defined seating and prevents lateral play that can introduce measurement scatter. For users of precision measuring equipment, this means fewer re-weighs and a smoother process flow; the plate’s form ensures the load is centred and the balance reads consistently, which supports quality control procedures and reduces downtime. Durable, hygienic material for long service life Made from stainless steel, the pan offers a corrosion-resistant surface that simplifies maintenance and resists common workshop contaminants. Stainless construction is widely used in metrology because it is non-reactive and easy to clean; residues from oils or fine particulates can be removed without affecting the surface or introducing measurement errors. The material choice therefore supports both operational reliability and workplace cleanliness, while the smooth finish reduces areas where debris can accumulate. Compact design and straightforward handling in the workshop The weighing plate is lightweight and designed for simple replacement or swap-out, reducing handling effort during routine servicing. Its precision fit for the EMB series avoids the need for additional adapters and keeps the weighing geometry unchanged, which helps maintain calibration settings. Supplied as a direct accessory for KERN balances, the plate integrates into existing setups without modification, supporting efficient inventory management and rapid readiness for measurement tasks. For assured compatibility with KERN EMB balances and prompt supply from Emmerich, contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: EMB-A02 Manufacturer: KERN GTIN: 4045761111394 Country of origin: CN ECLASS: 27320102 Facts Platform diameter: Ø105 mm Weight: 0.05 kg Special features Stainless steel construction Compatible with KERN EMB models with Ø105 mm weighing plate size Precision fit for reliable weighing Easy-to-clean, corrosion-resistant surface FAQ Is this weighing plate compatible with all KERN EMB balances? The weighing plate EMB-A02 is compatible with KERN EMB models that use a Ø105 mm weighing platform; it is not suitable for EMB variants with different platform sizes. Does the EMB-A02 affect balance calibration? When correctly seated, the EMB-A02 preserves the original weighing geometry of the balance and should not affect calibration; recalibration procedures remain the same as for the KERN EMB balance. How should the stainless surface be cleaned to avoid measurement errors? Use a soft cloth and mild detergent or alcohol-based cleaner; ensure the pan is dry and free of residues before weighing to maintain the precision of the balance with the EMB-A02. Can the plate be used in corrosive environments? The stainless steel construction of the EMB-A02 provides corrosion resistance for general workshop and lab use; for aggressive chemical exposure, consult material specifications and the balance manufacturer. What are the dimensions and weight of the plate for storage planning? The plate is designed for a Ø105 mm platform and has a nominal weight of 0.05 kg, making it compact and easy to store. Manufacturer: KERN — Address: not specified — Contact: not specified
Ø106mm Large Glass Draft Shield With Three Sliding Doors, For Precision Scales - KERN
Take advantage of a draft shield that improves weighing consistency and offers effortless access: the combination of three sliding doors and precise compatibility with KERN precision balances ensures stable results and smooth workflow. Order the Large Glass Draft Shield directly via Metav Werkzeuge or ask our consultants for compatibility advice and fast dispatch. Large Glass Draft Shield 572-A05 — KERN accessory with three sliding doors for easy sample access Large Glass Draft Shield 572-A05 is a glass enclosure designed to shield weighing pan assemblies from air currents while allowing convenient handling through its sliding doors. Three sliding doors for easy access Compatible with KERN 572, PKP and PKT Ø106 mm Reduces influence of drafts for stable weighing Lightweight at 0.5 kg for easy handling Consistent results through effective draught protection A well‑designed draft shield is essential for achieving reproducible readings on high‑precision balances. The enclosure reduces air disturbances that can cause fluctuation during measurement, supporting stable weighing and more reliable data logging. Its dimensions (150 x 140 x 130 mm) ensure adequate enclosure volume for common samples while keeping the disturbance zone small, which is particularly beneficial when working with analytical or precision balances. Compatibility with the specified KERN models means the shield integrates into existing measuring routines without altering calibration procedures, helping to maintain traceability and measurement confidence. Faster handling with three sliding doors Access to the weighing pan is simplified by the three sliding doors, which permit quick placement and removal of samples from multiple sides without lifting the entire enclosure. This design reduces handling time and the risk of introducing additional air movement during sample transfer, improving throughput in busy laboratory or workshop environments. The compact footprint and lightweight construction (0.5 kg) allow easy positioning and temporary removal when necessary, supporting flexible workflows where the enclosure is shared between stations or needs frequent repositioning. Practical compatibility and straightforward maintenance The shield is tailored for balance platforms with a pan diameter of Ø106 mm, fitting KERN 572 series and compatible PKP and PKT models that use that pan size. Installation is deliberately uncomplicated: the enclosure mounts around the weighing area to preserve the original balance geometry and does not require modification of the instrument. Cleaning is straightforward thanks to the glass surfaces, which maintain visual contact with the pan and sample throughout the weighing process; regular, gentle cleaning preserves visibility and prevents contamination. Overall, the enclosure offers a pragmatic balance of accessibility, protection and integration for professional measurement tasks. Contact Metav Werkzeuge for compatibility checks and fast dispatch from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 572-A05 SKU: 572-A05 GTIN: 4045761076587 Manufacturer: KERN Country of origin: DE Customs tariff number: 90160090 ECLASS: 22330605 Core specifications Dimensions: 150 x 140 x 130 mm Weight: 0.5 kg Special features Three sliding doors for convenient access Fits precision balances with weighing pan Ø106 mm Designed as a large glass draft shield for stable measurements FAQ Is this enclosure compatible with KERN analytical balances? The Large Glass Draft Shield 572-A05 is compatible with KERN 572 series and with KERN PKP and PKT models that use a weighing pan of Ø106 mm. Can the glass shield be used with larger pans? The enclosure is designed for pans with Ø106 mm and may not fit larger pan sizes; for other pan diameters an alternative enclosure is required. How does the draft shield affect measurement stability? By limiting air currents around the weighing pan, the draft shield reduces fluctuations and supports stable weighing, improving repeatability for small or lightweight samples. Is the enclosure easy to clean and maintain? Yes. The glass surfaces allow clear visibility and can be cleaned with suitable non‑abrasive agents to avoid scratches and contamination. Does the product include mounting hardware? The Large Glass Draft Shield 572-A05 is supplied as the enclosure unit; check the balance model compatibility (Ø106 mm) before integration with the instrument KERN — Germany; Contact: not specified
Ø118mm Öse für Unterflurwägungen, passend für 170×140mm Wägeplatten - KERN
Die Kombination aus Kompatibilität mit KERN‑Wägeplatten, kompakter Bauform und einfacher Montage sorgt für eine zuverlässige Unterflurwägungslösung; Nutzen Sie die Passgenauigkeit für minimale Stillstandzeiten und Fragen zur Auswahl gern unser Beratungsteam bei Metav Werkzeuge. Öse für Unterflurwägungen von KERN EG-A07 Die Öse EG-A07 ist ein Befestigungselement für Präzisionswaagen und ermöglicht stabile Unterflurwägungen bei Einbauten mit festen Wägeplattengrößen. Öse für Unterflurwägungen, passend für KERN Passend für Wägeplatten Ø 118 mm Kompatibel mit B×T 170×140 mm Geeignet für KERN EW-N/EG-N Serien Sichere Befestigung dank präziser Kompatibilität Mit dieser Öse ist die mechanische Verbindung zur Unterflurwägung auf wiederholbarem Niveau gewährleistet. Die Kompatibilität zu gängigen Wägeplattengrößen reduziert Abstimmungsaufwand bei Nachrüstungen und ermöglicht eine zügige Inbetriebnahme von Präzisionswaagen. Daraus ergibt sich ein unmittelbarer Nutzen: geringere Ausfallzeiten und planbare Montageprozesse. Herkunft und Verarbeitungsmerkmal für langlebigen Einsatz Hergestellt mit Blick auf industrielle Anforderungen, überzeugt das Bauteil durch passgenaue Fertigung und robustes Design. Die Produktion in JP (Japan) steht für konstante Qualitätskontrolle und Materialbeständigkeit, was den langfristigen Betrieb von Unterflurwägungen unterstützt. Ein Vorteil für Anwender ist die planbare Lebensdauer ohne häufige Austauschzyklen. Einfache Montage und erklärende Maßangaben Die Öse wurde für Wägeplattengrößen Ø 118 mm und B×T 170×140 mm konzipiert; das bedeutet, dass die Befestigungsbohrungen und Auflageflächen auf diese Standardmaße abgestimmt sind. Zur Vermeidung von Fehlinstallationen empfiehlt sich vor der Montage ein Abgleich der Wägeplattendimensionen mit den technischen Unterlagen der Präzisionswaage. Diese Maßangaben erleichtern die Vorbereitung und reduzieren Nacharbeiten. Zielgruppe und Einsatzszenarien Techniker in Werkstatt, Produktion und Labor profitieren von der klaren Spezifikation dieses Zubehörs, ebenso Fachhändler, die komplette Unterflurwägungssysteme anbieten. Durch die Kombination aus einfacher Austauschbarkeit und definierter Kompatibilität eignet sich das Produkt besonders für Anwender, die Wartungsfreundlichkeit und Betriebssicherheit priorisieren. Empfehlung: Für eine sichere und kompatible Unterflurwägung empfiehlt Metav das originale KERN Zubehör EG-A07; bei Fragen zur Eignung oder für ergänzende technische Daten erreichen Sie uns per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: EG-A07 Marke: KERN Bezeichnung: Öse für Unterflurwägungen Serie: EG Daten ECLASS: 27400890 (Produktklassifikation) Warennummer: 90160090 (TARIC) Gewicht (kg): 0 Besonderheiten Öse für Unterflurwägungen Passend für Präzisionswaagen mit Wägeplattengröße Ø 118 mm und B×T 170×140 mm Kompatibel mit KERN EW-N/EG-N Segment: Zubehör (Produktsegment) Produktkategorie: Waagen (Kategorie) Produktgruppe: Unterflurwägung (Gruppe) Ursprungsland: JP (Japan) FAQ Ist die Öse EG-A07 mit KERN EW-N Waagen kompatibel? Ja, die Öse EG-A07 von KERN wurde speziell für die Kompatibilität mit KERN EW-N/EG-N Serien entwickelt und passt zu den angegebenen Wägeplattengrößen. Welche Wägeplattengrößen werden unterstützt? Die Befestigungslösung ist ausgelegt für Wägeplatten mit Ø 118 mm und rechteckige Platten mit B×T 170×140 mm, wie in den technischen Merkmalen beschrieben. Wozu dient die Angabe ECLASS 27400890? Der Code ECLASS 27400890 klassifiziert das Produkt innerhalb eines standardisierten Waren‑ und Dienstleistungskatalogs und erleichtert die logistische Einordnung bei Bestellung und Ersatzteilbeschaffung.
Ø81mm Protective Cover For Scales, Pack Of 5 - KERN
Benefit from reliable, form-fitting protection and a ready spare supply that keeps weighing equipment operational. The pack combines simple compatibility with standard Ø81 mm weighing plates and the reassurance of a branded accessory from KERN; order the covers directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN PCB-A02S05 – Protective covers for scales, compatible with Ø81 mm weighing plates The KERN PCB-A02S05 is a practical protective cover designed as an accessory for weighing instruments with an 81 mm weighing plate, providing a straightforward way to keep weighing surfaces clean and serviceable. Pack of 5 protective covers Fits Ø81 mm weighing plates Lightweight, easy-to-fit design Keep scales accurate and contamination-free with a simple accessory A small, regular maintenance item can make a measurable difference to process reliability. The protective cover functions as a physical barrier that reduces exposure of the weighing plate to dust, spills and accidental contact, helping to preserve calibration intervals and measurement repeatability. Supplied as a pack of 5, this arrangement supports planned maintenance cycles and quick replacement, limiting unplanned downtime and keeping production or laboratory workflows steady. The branded nature of the accessory further supports consistent fit and performance when used with compatible instruments. Compatibility that simplifies procurement and installation Designed specifically for scales with a weighing plate diameter of Ø81 mm, these covers offer immediate compatibility where that specification is used. The diameter reference denotes the plate’s nominal crosswise measurement and ensures the cover seats correctly on round weighing pans. At an individual weight of 0.02 kg, the covers are lightweight and straightforward to handle during routine swaps. For operations managing multiple devices, the standardised fit eliminates guesswork when ordering spares and reduces the range of parts kept in stock, which simplifies inventory and logistics. Stock reliability and sourcing from a trusted precision partner Choosing this accessory through Metav Werkzeuge aligns practical procurement with supply-chain confidence. Metav’s position as a long-standing precision partner means access to a broad product range and centralized sourcing that reduces supplier count. With a proven customer base and a distribution centre in Emmerich, Metav provides a dependable channel for replenishing small but essential items such as these protective covers, supporting uninterrupted measurement tasks across workshops and industrial settings. The combination of standard compatibility and reliable supply supports operational efficiency and predictable maintenance planning. For supply, technical clarification or order advice on KERN protective covers for Ø81 mm weighing plates, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PCB-A02S05 Manufacturer: KERN GTIN: 4045761185326 Country of origin: CN Tariff number: 39269097 Pack contents: 5 protective covers Facts Weight: 0.02 kg Fit: Ø81 mm weighing plate eCl@ss: 24322502 Special features Accessory for scales Suitable for models with weighing plate Ø81 mm Lightweight, easy-to-fit design FAQ Are these covers suitable for all KERN scales? These covers are suitable for KERN scale models that use a weighing plate with a diameter of Ø81 mm; compatibility depends on the plate size rather than the overall model designation. How many covers are included with the PCB-A02S05? The PCB-A02S05 is supplied as a pack of five protective covers to allow straightforward replacement and stock rotation. Can the KERN PCB-A02S05 be used on non-KERN scales? Yes, the covers may be used on other brands provided the weighing plate measures Ø81 mm and the plate geometry permits a snug seating of the cover. Does the product include mounting hardware or additional accessories? The listing for the PCB-A02S05 describes the protective covers only; no mounting hardware is specified in the product data. How does using these covers benefit maintenance schedules? By protecting the weighing plate from contamination and wear, the covers can extend intervals between cleaning and reduce the likelihood of calibration drift, supporting more predictable maintenance planning. KERN — Origin: CN — GTIN: 4045761185326
Ø90mm Sample Pan Aluminium, Pack of 80 - KERN
Aluminium sample pans with a Ø 90 mm diameter supplied as a pack of 80 combine lightweight durability and efficient stock handling for routine weighing tasks; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN MLB-A01A – Aluminium sample pans, Ø 90 mm A KERN MLB-A01A aluminium sample pan designed as a scales accessory for routine sample weighing and handling in laboratories and workshops Aluminium construction, corrosion-resistant Diameter Ø 90 mm for standard balances Supplied as pack of 80 pieces Built for dependable weighing results The aluminium construction provides a stable, low-mass tray that minimises thermal influence and helps maintain consistent readings on laboratory and industrial balances. The Ø 90 mm footprint matches common pan dimensions, ensuring reliable seating on most bench and precision balances without the need for adaptors. Aluminium is non-magnetic and has a naturally passive surface, which reduces interaction with many sample types; this supports precise mass determination and simplifies error sources during routine measurements. Stock efficiency and handling for busy workflows Supplied as a pack of 80, the pans reduce the frequency of reordering and simplify inventory management for production lines, quality departments and teaching labs. The total net weight is approximately 0.3 kg, which reflects the lightweight nature of the set and eases handling during restocking and storage. Bulk supply also supports hygienic practices: single-use or dedicated pans per batch prevent cross-contamination and save time otherwise spent on repeated cleaning cycles, increasing throughput in repetitive weighing operations. Compatibility, maintenance and sustainability benefits Designed as an accessory for balances, the pans are suitable for general sample collection and short-term storage before and after weighing. Aluminium pans are easy to clean with standard laboratory detergents and are recyclable at end of life, offering a pragmatic balance between operational convenience and environmental considerations. Originating from China under the KERN range, these pans provide a consistent specification that integrates well with established weighing procedures and lab workflows. For reliable replenishment of KERN aluminium sample pans in packs of 80 and expert advice on compatibility with existing balances, contact Metav Werkzeuge in Emmerich to arrange supply and technical guidance. Technical data Article number: MLB-A01A Manufacturer: KERN GTIN: 4045761179646 Country of origin: CN Tariff code: 90160090 Core technical data Diameter: Ø 90 mm Net weight: 0.3 kg Pack quantity: 80 pieces ECLASS: 32040606 Materials & applications Material: Aluminium Category: Scales accessories Suitable for: sample weighing and handling FAQ Are these pans compatible with precision analytical balances? Yes. The KERN MLB-A01A aluminium pans are designed with a Ø 90 mm diameter to fit standard analytical and bench balances, providing stable seating and repeatable readings. Can the pans be cleaned and reused? Yes. The aluminium construction allows cleaning with common laboratory detergents; depending on the application, the pans can be reused or treated as single-use to avoid cross-contamination. What quantity is supplied per pack? The product is supplied as a pack of 80 pieces, which is useful for laboratories and workshops that require frequent replenishment. Is the material suitable for reactive samples? Aluminium has a passive surface but may react with strongly alkaline or acidic reagents; for reactive samples, consider appropriate lining or an alternative pan material. The KERN MLB-A01A is suitable for routine, non-corrosive sample handling. Where are these pans produced? These aluminium sample pans are manufactured in China and distributed under the KERN range. Metav Werkzeuge, Emmerich am Rhein – info@metav-werkzeuge.com – +49 2822 7131930
≤10t Accessory for CR-Q1, Galvanised Steel - KERN
Take advantage of a robust, corrosion-resistant accessory that supports nominal loads up to ≤10 t while ensuring reliable compatibility with the CR‑Q1 scale; order directly via Metav Werkzeuge or consult our specialists for specification support. CE.Q42901 accessory for CR‑Q1 — galvanised steel, rated ≤10 t (KERN) A durable CE.Q42901 accessory designed as a dedicated attachment for the KERN CR‑Q1 industrial scale, engineered for heavy-duty weighing tasks in workshop and industrial environments. Galvanised steel construction Compatible with CR‑Q1 scale Rated for nominal load ≤10 t Compact mass: 6 kg Secure load handling for heavy-duty weighing The accessory is specified for a nominal load ≤10 t, which provides a clear safety and performance envelope when paired with industrial scales. Constructed from galvanised steel, the component keeps mechanical deformation and measurement disturbance to a minimum, enabling stable readings under heavy loads. By defining the load capacity explicitly, operational planners can match lifting and weighing routines to the accessory’s rated limits and preserve the integrity of the scale system. Designed to withstand workshop conditions The attachment’s galvanised steel finish offers a corrosion-resistant surface that extends service life in industrial and semi-exposed environments. At a weight of 6 kg, the unit remains manageable for integration and handling while contributing minimal additional inertia to the installation. The robust material choice reduces maintenance cycles and supports predictable downtime planning, which benefits production throughput and long-term asset management. Straightforward integration with existing scale systems Engineered as a purpose-made accessory for the CR‑Q1 family, mechanical interfaces and fitment are designed to maintain compatibility with the host device, simplifying installation and reducing commissioning time. The clear definition of the accessory’s load class and materials supports technicians in verifying conformity with workplace safety rules and integrating the part into existing load measurement chains without extensive modification. Proven supply and specification support from Metav Sourcing precision components through an established distributor improves procurement reliability. Metav’s position as a quality filter for the European market, combined with a large warehouse in Emmerich, supports consistent availability and traceable goods flow. For operations that require dependable supply and specification clarity, the combination of branded components from KERN and Metav’s fulfilment infrastructure strengthens both operational planning and regulatory documentation. Contact Metav Werkzeuge in Emmerich for technical clarification, compatibility checks and prompt supply of the KERN CE.Q42901 accessory Technical data Article number: CE.Q42901 Manufacturer: KERN Product type: Accessory for CR‑Q1 Facts Weight: 6 kg Nominal load: ≤10 t ECLASS: 21131725 Special features Material: Steel, galvanised Compatibility: for CR‑Q1 Category: Zubehör / accessory FAQ What is the maximum load capacity of this accessory? The CE.Q42901 accessory for the KERN CR‑Q1 is specified for a nominal load of ≤10 t. Which material is used and how does it perform in humid environments? The unit is made from galvanised steel, which offers a corrosion-resistant surface suitable for typical workshop atmospheres. Is the accessory directly compatible with the CR‑Q1 scale range? Yes, the accessory is designed for integration with the CR‑Q1 scale family and maintains mechanical compatibility. What is the mass of the accessory and how might that affect installation? The accessory has a mass of 6 kg, which keeps handling and installation straightforward while keeping added inertia low. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930
≥20t Accessory for CR-Q1 Steel Zinc-Plated, 13kg - KERN
Take advantage of a combination of galvanised steel construction, a nominal load rating of ≥20 t and proven KERN manufacturing to secure reliable performance in heavy‑duty weighing environments; order the accessory directly via Metav Werkzeuge or consult our specialists for specification support. CE.Q42902 – Accessory for CR‑Q1, galvanised steel, ≥20 t (KERN) The CE.Q42902 is a galvanised steel accessory for the CR‑Q1 weighing system, engineered to support heavy static loads and to enhance stability in industrial weighing applications. Galvanised steel construction Rated for ≥20 t nominal load Robust 13 kg unit weight Built for heavy‑duty weighing and reliable performance The accessory is manufactured from galvanised steel, which provides a stable base for industrial scales and contributes directly to measurement consistency. With a nominal load ≥20 t, the component is suited to applications where high static capacity is essential, such as vehicle weighing or large platform scales. The choice of material and the component’s mass ensure that vibration damping and positional stability are improved, which in turn reduces measurement variability and the need for frequent recalibration. Compatibility with the CR‑Q1 series allows integration with established weighing systems without redesigning the platform. Durability that reduces maintenance and downtime A corrosion‑resistant finish means prolonged operational life in demanding environments, from covered docks to industrial yards where humidity and airborne contaminants accelerate wear. The galvanised coating protects the substrate against oxidation, lowering the frequency of replacement and unplanned maintenance. The robust construction supports continuous operation under load, so production flows remain uninterrupted and maintenance windows can be planned rather than reactive. This translates into measurable savings in labour hours and fewer interruptions to production schedules. Straightforward installation and system compatibility Designed as an accessory for the CR‑Q1 weighing range, the unit offers straightforward mechanical integration and predictable mechanical behaviour under load. The 13 kg mass provides inertia that stabilises the weighing assembly without requiring additional ballast. As a KERN‑made component, CE.Q42902 is produced to established tolerances and quality standards, simplifying procurement and ensuring parts are interchangeable across compatible platforms. For technical clarification or to match the accessory precisely to an existing scale setup, Metav Werkzeuge’s technical advisors can provide detailed guidance and documentation. Contact Metav Werkzeuge for tailored advice on KERN accessories for CR‑Q1 systems and to ensure the correct specification for heavy‑duty weighing applications; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CE.Q42902 Manufacturer: KERN Product type: Accessory for CR‑Q1 Material: Steel, galvanised Weight: 13 kg Nominal load: ≥20 t Data Weight: 13 kg Nominal load: ≥20 t Special features Galvanised steel construction Suitable for CR‑Q1 weighing systems Accessory category: Zubehör SKU: CE.Q42902 FAQ Is this accessory compatible with CR‑Q1 weighbridges? Yes. The CE.Q42902 accessory by KERN is designed specifically for use with CR‑Q1 systems and integrates mechanically with the platform assembly. What nominal load capacity does the accessory support? The accessory is rated for a nominal load of ≥20 t, suitable for heavy static weighing tasks. What material and finish are used? The unit is manufactured from steel with a galvanised finish to provide corrosion resistance and extended service life. How much does the component weigh and why does that matter? The unit weighs 13 kg; this mass contributes to stability and vibration damping in the weighing assembly. Is the accessory suitable for outdoor industrial environments? Yes. The galvanised finish offers protection against corrosion, making the accessory appropriate for many covered or semi‑exposed industrial settings. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com