Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
KDP-A03 Bluetooth LE Data Interface Module, Non-Retrofit - KERN
Take advantage of the combination of reliable Bluetooth LE transmission, compact integration and factory-installed assurance for consistent scale data flow; order the Bluetooth data interface directly via Metav Werkzeuge or consult our advisors for technical clarification. KDP-A03 Bluetooth data interface for KDP scales by KERN — Bluetooth LE connectivity, factory-installed The KDP-A03 Bluetooth data interface provides low-energy wireless data transfer for the KDP series of weighing platforms, enabling streamlined communication between scales and external systems. KERN Bluetooth LE connectivity Compact interface for KDP scales Low-energy operation for consistent transmission Factory-installed; not retrofittable Fast, reliable wireless transfer that keeps production moving The interface enables Bluetooth LE communication designed specifically for KDP weighing systems, delivering a steady stream of measurement values to connected logging or control systems. By replacing cable-bound data collection, the module reduces wiring complexity and shortens data latency, which supports faster process cycles and fewer manual entries. The built-in transmission profile is tailored for weighing data, so reliable transmission of single-point readings and continuous streams is ensured under normal workshop conditions. This lowers the risk of transcription errors and simplifies data capture in routine quality checks. Simple integration with existing KDP installations for predictable workflows Engineered as a factory-installed module for the KDP family, the unit permits immediate integration into established weighing setups without additional retrofitting. The compact footprint conserves panel space while the device’s low-energy operation reduces interference with other measurement electronics. Integration benefits include standardised output behaviour and stable connectivity with host devices that support Bluetooth LE, enabling automated logging or interfacing with inventory and MES systems. For operations seeking consistent data flow, this approach reduces setup uncertainty and shortens commissioning time. Practical value for workshop and industrial weighing applications For technical teams that prioritise dependable data transfer, the module provides a clear operational advantage: wireless export of weight values eliminates repetitive manual steps and supports traceable records. The factory-installed nature guarantees compatibility with the KDP hardware platform and avoids variability introduced by third-party add-ons. Where traceability and repeatability are essential, this interface helps maintain measurement integrity and supports efficient reporting. The streamlined data path benefits shop-floor efficiency and contributes to continuous production monitoring. Contact Metav Werkzeuge in Emmerich for ordering and technical advice on the KDP-A03 Bluetooth data interface; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for detailed specifications and delivery from stock. Technical Data Article number: KDP-A03 Manufacturer: KERN SKU: KDP-A03 GTIN: 4045761235823 ECLASS: 19050110 Country of origin: CN Customs tariff number: 84239010 Core technical figures GTIN: 4045761235823 ECLASS: 19050110 Customs tariff number: 84239010 Special features and compatibility Bluetooth LE communication Designed for KDP series scales Factory-installed, not retrofittable Manufacturer: KERN FAQ Is the Bluetooth module compatible with all KDP models? The KDP-A03 Bluetooth data interface is designed for the KDP series; compatibility depends on the specific KDP model and its configuration, with factory integration ensuring standardised behaviour. Can the module be added to existing scales as an upgrade? The interface is factory-installed and therefore not retrofittable; retrofit options are not provided for models that were not originally configured for this module. What wireless standard does the interface use? The module uses Bluetooth LE, optimised for low-energy, short-range data transmission suitable for workshop and industrial environments. How are measurement values transmitted and used? Weight data from the scale is transmitted via Bluetooth LE to a paired host that accepts the scale’s data format, enabling automated logging and integration into existing data systems. Who manufactures the module and where is it produced? The module is manufactured by KERN and marked with GTIN 4045761235823; the country of origin is CN. KERN — Origin: CN
Kern 0.1kg Indicator Conversion Module Quick Dispatch - KERN
Take advantage of fast dispatch, KERN compatibility and a compact retrofit design to modernise scale indicator units with minimal downtime. Order the retrofit directly via Metav Werkzeuge or consult our specialists for integration advice. Indicator Unit Retrofit KIB‑M01 — Scale indicator upgrade by KERN The Indicator Unit Retrofit KIB‑M01 is an upgrade module for scale evaluation units, developed to simplify integration into existing weighing systems and to restore or enhance indicator functionality for professional applications. Rapid dispatch from stock in Emmerich KERN compatibility for scale indicators Compact and lightweight at 0.1 kg Intended for weighing system retrofits Minimise downtime with a practical retrofit solution The retrofit module delivers a pragmatic approach to extending the service life of weighing equipment. By replacing or upgrading the existing evaluation electronics, workshops and industrial users benefit from reduced machine downtime and a targeted restoration of measurement capabilities. The compact construction and low mass support straightforward handling during installation, while the KERN provenance signals a component engineered for metrology environments. Clear technical fit and system compatibility Designed for use as an accessory within weighing systems, the unit aligns with standard indicator housings and electrical interfaces commonly encountered in scale fleets. The retrofit is presented as a straightforward alternative to full instrument replacement, enabling cost-efficient system upkeep. Where system specifications vary, Metav Werkzeuge can help verify mechanical and electrical compatibility before procurement to ensure a smooth integration. Practical advantages for maintenance and service planning Using a retrofit module helps centralise spare-part strategies and simplifies maintenance planning. Service teams gain a compact replacement item that is easy to stock and transport thanks to its low weight. The solution supports efficient workshop workflows: quicker replacements, fewer specialist parts to manage and predictable outcomes for quality assurance in weighing operations. Quality assurance and supply reliability from a trusted partner The product is supplied under the KERN name and is distributed through Metav Werkzeuge, a partner known for comprehensive metrology offerings and dependable order processing from Emmerich. This distribution route ensures traceable sourcing and access to broad product ranges, which supports consolidated procurement and consistent quality control across measurement equipment inventories. Request retrofit advice and availability from Metav Werkzeuge — our consultants support KERN indicator upgrades and can confirm suitability for specific weighing systems Technical data Article number: KIB SKU: KIB-M01 GTIN: 4045761198531 Manufacturer: KERN Country of origin: CN Tariff number: 84238220 eClass: 27329104 Weight: 0.1 kg Facts Weight (kg): 0.1 Tariff code: 84238220 eClass code: 27329104 GTIN: 4045761198531 Special features Accessory for scales and weighing systems Retrofit module for indicator/evaluation units Supplied via Metav Werkzeuge with rapid dispatch from Emmerich Brand compatibility: KERN FAQ What is the purpose of this retrofit module? The retrofit module is intended to renew or upgrade the evaluation electronics of a scale indicator, restoring functionality without replacing the entire weighing instrument. Is the module compatible with all KERN indicators? Compatibility depends on the indicator model and interface; Metav Werkzeuge can assist in verifying whether the KIB‑M01 retrofit matches a specific KERN indicator. How heavy and portable is the unit? The unit weighs 0.1 kg, making it compact and easy to handle for service technicians during installation. What documentation is supplied with the retrofit module? Technical details and dispatch information are provided by the distributor; Metav Werkzeuge can supply any available integration notes or specification sheets on request. Can this retrofit be used to upgrade older weighing systems? Yes, the module is designed as a cost‑effective option for extending the functional life of older indicator units, subject to compatibility checks. Manufacturer: KERN — Origin: CN; Distributor and contact: Metav Werkzeuge, Emmerich (Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271)
KERN CE-P4022 Load Corner For CT-500/1000/1500-3P1 Nickel-Plated Steel - KERN
Choose a robust interface that combines nickel-plated steel construction with precise compatibility for KERN CT series scales; this ensures reliable force transmission and consistent measurement results. Order the part directly via Metav Werkzeuge or consult our specialists for integration advice. Load corner CE P4022 — nickel-plated steel load-corner for CT-500/1000/1500-3P1 (KERN) A Load corner CE P4022 designed to provide secure mechanical coupling and accurate force transmission for KERN CT-500/1000/1500-3P1 weigh modules and scale assemblies. Nickel-plated steel construction Compatible with CT-500/1000/1500-3P1 Robust design for precise force transfer Reliable connection for consistent measurement results The primary role of this load-carrying interface is to ensure repeatable, distortion-free transmission of applied force from the weighing surface to the measurement element. Built from nickel-plated steel, the component provides a stable mechanical path that keeps deflection and misalignment to a minimum, supporting reliable readings in industrial environments. Compatibility with the CT series guarantees straightforward mechanical integration into standard scale housings, reducing installation time and potential calibration effort. The design supports consistent measurement behaviour across repeated loading cycles, which is critical for quality control and production monitoring. Long-lasting finish and workshop-ready robustness A corrosion-resistant nickel-plated finish extends service life where humidity or handling introduce surface wear, while the steel core ensures structural integrity under normal workshop loads. The combination of surface treatment and solid construction offers low-maintenance durability: routine inspections suffice, with no specialised care required. Where traceability and uptime matter, such as in assembly lines or calibration benches, the durable interface helps prevent unexpected service interruptions and supports continuous operation. The use of established materials and finish standards also simplifies compliance checks during component audits. Practical integration advantages for industrial workflows Compatibility with common KERN modules makes the part a practical choice for workshop upgrades, repairs or new assemblies within weighing systems. The straightforward mechanical match to CT-500/1000/1500-3P1 reduces the risk of incorrect mating and subsequent measurement error, enabling faster commissioning. Technical advice is available from Metav Werkzeuge for complex set-ups or bespoke mounting scenarios, and the product’s robust properties contribute to fewer rework cycles and lower long-term maintenance needs. Overall, the component supports higher process reliability and clearer measurement traceability in metrology applications. Select the KERN CE P4022 through Metav Werkzeuge for dependable scale integration — technical advice and order processing are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: CE.P4022 Manufacturer: KERN SKU: CE.P4022 Material: Nickel-plated steel Product group: Load corners (accessories for measuring instruments) Facts Weight: 5.49 kg GTIN: 4045761220928 Customs tariff (HS code): 84239010 Origin: CN Special features Compatible with CT-500/1000/1500-3P1 Nickel-plated finish Robust connection for load cells Segment: Accessories for scales FAQ What is the purpose of this load corner? The Load corner CE P4022 serves as the mechanical interface that transmits force from the weighing surface into the scale’s measurement chain, ensuring stable and repeatable readings. Is this component compatible with my CT-500 scale? Yes — the CE P4022 is compatible with the CT-500 series and also matches CT-1000 and CT-1500 variants for straightforward installation. What material and finish does the component have? The part is made of steel with a nickel-plated finish, offering structural strength and enhanced surface corrosion resistance. Can the load corner withstand regular industrial use? Designed for workshop and industrial environments, the component’s robust construction and plated surface support reliable operation under standard load cycles. KERN, China — address and direct contact not specified
KERN CE-RQ 5 kg Load Corner for CT-Q1 Stainless Steel - KERN
Take advantage of the combination of a stainless-steel construction, precise fit for the CT-Q1 platform and central supply from Emmerich for reliable workshop weighing performance; order the load corner directly via Metav Werkzeuge or consult our specialists for technical advice KERN Load Corner for CT-Q1 — stainless-steel corner assembly for industrial scales KERN Load Corner for CT-Q1 is a purpose-made corner assembly for professional weighing platforms, designed to transfer loads accurately and withstand workshop conditions KERN load corner for CT-Q1 compatibility Stainless-steel construction for corrosion resistance Robust 5 kg component weight for stability Fast dispatch from central Emmerich warehouse Guaranteed weighing consistency and precise load transfer The KERN load corner is engineered to ensure consistent force transmission into the scale's sensing system, supporting accurate measurement results on the CT-Q1 platform. The corner assembly performs the mechanical function of directing load through a defined contact point, which reduces lateral forces and measurement deviation. The stainless-steel construction provides dimensional stability and resistance to deformation, meaning the precision of the weighing system is maintained over repeated cycles and under typical workshop stresses. Durable workshop design with simplified upkeep Constructed from stainless steel, this corner assembly resists corrosion and surface wear that commonly affect scale components in industrial environments. The robust mass (approx. 5 kg) contributes to mechanical stability during loading events and helps dampen vibration, reducing the need for frequent recalibration. Cleaning and visual inspection are straightforward, which keeps maintenance intervals short and operational downtime low. The design supports a long service life without specialised maintenance tools. Fewer suppliers, more dependable supply chain As an accessory tailored for the CT-Q1 series, the corner assembly integrates directly with existing platform hardware, simplifying installation and spare-parts management. Procuring this component via Metav Werkzeuge centralises supply and reduces the number of vendors required for workshop upkeep, supporting a more efficient procurement process. Fast dispatch from the Emmerich warehouse and Metav’s experience in metrology ensure dependable delivery and a clear quality filter for every item supplied. Secure the KERN load corner for CT-Q1 from Metav Werkzeuge for assured compatibility and rapid supply from Emmerich; contact our advisors for detailed installation guidance or additional technical data Technical data Article number: CE.RQ35902 Manufacturer: KERN Model ID: CE-RQ ECLASS: 21131725 Core data Weight: 5 kg Materials & compatibility Material: stainless steel Compatible with: CT-Q1 weighing platform Category: Scales / Accessory FAQ Is this corner assembly compatible with the CT-Q1 scale? The KERN load corner is designed for the CT-Q1 platform and provides direct mechanical compatibility for correct load transfer (SKU CE.RQ35902). What material is used and how does it affect longevity? Made from stainless steel, the corner assembly resists corrosion and surface wear, which supports long-term durability in workshop environments. Does the component require regular calibration after installation? Installation of the corner assembly supports stable load transmission; any required recalibration depends on the overall scale system and local quality procedures rather than the accessory itself. Can the corner be cleaned easily in an industrial setting? Yes, the stainless-steel surface allows straightforward cleaning and inspection, reducing maintenance time and simplifying routine checks. Where is the product shipped from and who supplies it? Supply and dispatch are handled from Metav Werkzeuge’s central warehouse in Emmerich, ensuring consistent availability and logistics for workshop customers. Manufacturer: KERN | Supplied via Metav Werkzeuge, Emmerich am Rhein | Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930
KERN HFD 6T-3 Hook 11.5 kg Zinc-Plated Cast Steel With Safety Latch - KERN
Take advantage of the combination of a secure safety latch, robust galvanised and painted cast steel construction and a fixed, non-rotating design for dependable lifting operations; order the hook directly via Metav Werkzeuge or consult our specialists for technical clarification. Hook with Safety Latch HFD-A03 — Lifting accessory for KERN crane scales (galvanised cast steel) The Hook with safety latch for HFD is a fixed lifting attachment designed to fit the KERN HFD 6T-3 crane scale and to increase operational safety in industrial weighing and lifting applications. Galvanised and painted cast steel construction Fixed, non-rotating lifting eye Integrated safety latch for secure loads Secure handling to protect loads and personnel The attachment has been specified to improve handling safety in everyday lifting tasks. Its safety latch prevents accidental disengagement during hoisting, while the robust galvanised and painted cast steel body withstands mechanical stresses and abrasion. This results in fewer interruptions and a lower risk of dropped loads, supporting a safer workplace and predictable process flow. The combination of a solid cast construction and a retention mechanism also simplifies compliance checks during routine inspections. Designed for reliable integration with existing crane systems Compatibility with the KERN scale series is a core benefit: the hook is dimensioned for the KERN HFD 6T-3 model, offering a seamless mechanical connection that reduces installation time and avoids fitment uncertainties. The non-rotating design reduces torsional wear on the scale's suspension point and on the hook itself, which in turn decreases maintenance frequency and preserves calibration stability. For engineers and workshop managers, this means fewer adjustments and a more consistent measuring chain between load and instrument. Built to reduce downtime and long-term maintenance needs Surface finishing and material choice contribute directly to lifecycle costs. The galvanised and painted surface offers measurable corrosion resistance, protecting the attachment in humid or workshop environments and extending service intervals. With this durable construction, the lifting accessory supports continuous operation under industrial conditions, helping to keep workflows steady and maintenance budgets predictable. The investment in a purpose-made lifting hook therefore translates into improved uptime and operational reliability. For secure and compatible lifting accessories, request the HFD-A03 from Metav Werkzeuge — email info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 to discuss suitability and availability. Technical data Article number: HFD-A03 SKU: HFD-A03 Manufacturer: KERN Material: galvanised and painted cast steel Weight: 11.5 kg GTIN: 4045761206762 Origin: DE Tariff number: 84239010 Facts Weight: 11.5 kg GTIN: 4045761206762 Tariff number: 84239010 Special features Safety latch included Non-rotating design Compatible with KERN HFD (Model HFD 6T-3) FAQ What load classes is the hook suitable for? The hook HFD-A03 is supplied as a dedicated lifting attachment for the KERN HFD series; load class must be verified against the connected crane scale and lifting equipment specifications. Does the hook include a safety mechanism? Yes, the hook is equipped with an integrated safety latch to prevent accidental release during lifting operations. Is the material suitable for workshop and mildly corrosive environments? The component is made from galvanised and painted cast steel, offering enhanced corrosion resistance for typical workshop conditions. Can this attachment rotate on the suspension point? The design is non-rotating, which reduces torsional load transfer and minimises wear on the scale suspension. KERN — Germany. Contact: not provided.
KERN Stainless Steel Accessory for CR-Q1 - KERN
Take advantage of robust stainless steel construction and stable, scale‑specific design to ensure consistent weighing results; ideal for integration into production lines. Order the accessory directly via Metav Werkzeuge or contact our consultants for compatibility checks and delivery from Emmerich. KERN CE.RQ42902 accessory for CR-Q1 – stainless steel, 13 kg The CE.RQ42902 accessory is a dedicated add‑on for the CR‑Q1 industrial scale, developed to enhance stability and long‑term reliability in workshop and production environments Compatible with CR‑Q1 scales for direct integration Robust stainless steel construction for industrial use Weighted design improves measurement stability Manufactured by KERN for proven metrological quality Improve measurement stability with a purpose‑built accessory The accessory is engineered to provide a solid, vibration‑resistant platform that supports precise weighing operations. Made from stainless steel, the construction resists corrosion and mechanical wear, which contributes to consistent readings over time. By matching the accessory’s dimensions and mounting points to the CR‑Q1 scale series, compatibility is guaranteed, reducing the need for ad‑hoc modifications. The additional mass of the component enhances stability during transient loads and helps to dampen external disturbances, which is particularly valuable in environments where repeatability and traceable results are required for quality control and process monitoring. Simple integration that reduces downtime and boosts throughput Designed for straightforward installation, the accessory allows rapid assembly into existing weighing systems, shortening service intervals and minimising production interruptions. Clear interface alignment with the CR‑Q1 family speeds setup and calibration, supporting faster return to operation. The solid build and predefined fixings mean fewer adjustments during commissioning, increasing operational efficiency and reducing the risk of measurement error introduced by improper mounting. In high‑throughput or batch processes, this ease of integration translates into measurable gains in uptime and productivity. Engineered for endurance and broad industrial use The choice of stainless steel and robust mechanical design ensures long service life with minimal maintenance. Surfaces are easy to clean, making the accessory suitable for workshop floors, production cells and laboratory environments where hygiene and durability are priorities. The component is compatible with standard industrial weighing routines and is appropriate for sectors that demand reliable repeatability under continuous use. Metav Werkzeuge’s role as a quality filter in Emmerich underpins supply chain reliability: items are dispatched from a controlled stock that supports consistent product quality and dependable delivery. For guaranteed compatibility and reliable supply from Emmerich, request the KERN CE.RQ42902 accessory for CR‑Q1 through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: CE‑RQ SKU: CE.RQ42902 Manufacturer: KERN Material: stainless steel Weight: 13 kg Category: Scales – Accessory Suitable for: CR‑Q1 scale series Facts Net weight: 13 kg Material specification: stainless steel Special features Designed for direct integration with CR‑Q1 Corrosion‑resistant surface Industrial grade construction Intended for enhanced stability during weighing FAQ What scales is this accessory compatible with? The accessory is compatible with the CR‑Q1 scale series; the CE.RQ42902 was developed specifically to match the CR‑Q1 interface and mounting points. How does the material affect performance? Stainless steel construction improves durability and corrosion resistance, which helps maintain consistent measurement results and reduces maintenance for the CE.RQ42902 accessory. Is the accessory suitable for industrial production environments? Yes, the robust design and weighted construction make the accessory suitable for workshop and production environments where enhanced stability is required. How does the accessory improve weighing accuracy? By providing a stable, vibration‑resistant platform and precise interface alignment with the CR‑Q1, the accessory minimises external influences and improves repeatability. Manufacturer: KERN Address: Not specified Contact: Not specified
KERN Stainless Steel Base Plate for CT-Q1, 3.2 kg - KERN
Take advantage of the combination of stainless steel construction and a weighted 3.2 kg design to improve stability and repeatability in precision weighing applications; order the part directly via Metav Werkzeuge or consult our specialists for tailored advice. Base plate CE.RQ35911 for CT‑Q1 — stainless steel, 3.2 kg A base plate for CT‑Q1 designed to provide a stable, corrosion‑resistant mounting surface for precision weighing instruments in industrial and workshop environments Stainless steel construction for corrosion resistance Compatible with KERN CT‑Q1 scales and accessories Weighted design (3.2 kg) for improved measuring stability Engineered stability for repeatable results The plate’s 3.2 kg mass and solid build reduce micro‑vibrations and movement that can affect measurement repeatability. By increasing the effective mass beneath a weighing module, the component helps to dampen transient forces and improves the signal stability from the load cell. For metrology and quality assurance tasks where small fluctuations matter, this contributes to more reliable readings and fewer rechecks, supporting efficient production workflows and traceable results. Durable stainless steel suited to workshop conditions Manufactured from stainless steel, the mounting surface resists corrosion and maintains dimensional integrity under regular cleaning and use. This material choice minimises the need for frequent replacement and reduces surface wear, which in turn lowers maintenance intervals. The corrosion‑resistant finish also supports use in environments where humidity or occasional exposure to liquids occurs, helping to preserve calibration stability over time. Straightforward integration with CT‑Q1 scale systems Designed for direct compatibility with the CT‑Q1 family, the plate simplifies installation and ensures consistent mechanical coupling between the scale and its support. The product is supplied under SKU CE.RQ35911, enabling quick identification in spare‑parts lists and documentation. Where alignment and secure mounting are essential for measurement accuracy, the mounting plate provides a reliable interface that maintains the correct datum for the weighing sensor. Supply reliability and professional sourcing Sourced through an experienced precision partner, this component benefits from a transparent supply chain and tested quality standards. Metav Werkzeuge acts as a quality filter for the European market, supporting reliable procurement: a broad product range and an established logistics base in Emmerich contribute to dependable availability. This makes the plate a practical choice for workshops and industrial users seeking consistent performance from their weighing equipment. For precision that endures and delivery from a trusted European supplier, request the KERN base plate via Metav Werkzeuge or speak to our advisors at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CE.RQ35911 Manufacturer: KERN eClass: 21130111 Core specifications Weight: 3.2 kg Material: Stainless steel Special features Compatible with CT‑Q1 scale systems Corrosion‑resistant construction SKU: CE.RQ35911 FAQ Is this plate compatible with other KERN models? The plate is specified for use with the CT‑Q1 family and is listed as SKU CE.RQ35911; compatibility with other models should be verified against the device mounting specifications. How does the plate affect weighing accuracy? A heavier, rigid mounting plate reduces vibration and movement beneath the load cell, improving the stability of readings and supporting more repeatable results when using the KERN CT‑Q1 system. What maintenance does the stainless steel surface need? The stainless steel finish requires only routine cleaning to remove debris and liquids; regular visual checks are recommended to ensure the mounting interface remains free of contaminants that could affect performance. Can this plate be used in humid or damp environments? The corrosion‑resistant stainless steel construction is suitable for environments with occasional moisture exposure, though permanent immersion or aggressive chemicals should be avoided to preserve long‑term integrity. Where can replacement plates or spares be ordered? Replacement parts are available under SKU CE.RQ35911; procurement can be arranged through Metav Werkzeuge or authorised KERN distributors. KERN
KERN Stainless Steel Base Plate for CT.3000/5000 Three-Point - KERN
Taking advantage of a robust stainless-steel design and clear compatibility with KERN CT.3000/5000 series, this base plate improves weighing stability and reduces measurement fluctuations; order directly via Metav Werkzeuge or consult our specialists for technical advice. Base plate for CT.3000/5000-3Q1 — stainless-steel scale accessory by KERN The base plate for CT.3000/5000-3Q1 is a stainless-steel mounting plate designed to stabilise KERN countertop scales and ensure consistent results in workshop and industrial weighing tasks Stainless-steel construction for corrosion resistance Compatible with CT.3000 and CT.5000 series Adds mass and stability at approx. 6 kg Fast dispatch from Metav's European stock Greater stability for more reliable weighing results The mounting plate increases the overall system mass and dampens external vibrations, which leads to measurably improved precision during repeat weighing cycles. Made from stainless steel, the plate resists corrosion in humid or workshop environments and maintains a consistent surface for scale placement. By adding approximately 6 kg of mass and a low centre of gravity, the accessory reduces small deflections that can otherwise introduce scatter in consecutive readings, helping to achieve more reliable averages and fewer re-checks during production or quality control. Secure fit and clear compatibility to reduce setup time Designed specifically for the CT.3000 and CT.5000 family, the base plate for CT.3000/5000-3Q1 aligns with the standard mounting points of these KERN countertop scales, which simplifies integration into existing setups. The precise fit reduces the need for shimming or additional adapters and therefore shortens installation time on the workshop floor. As a purpose-built accessory, the plate maintains the scale’s factory geometry, preserving calibration behaviour and avoiding unintended load-path changes that can affect measurement repeatability. Durable construction and dependable supply for uninterrupted workflows Constructed from corrosion-resistant stainless steel, the plate withstands regular cleaning and routine workshop use while preserving its structural integrity. Supplied by KERN and distributed through Metav Werkzeuge, the accessory benefits from a stable European supply chain that supports continuous operations. Metav's approach — democratising precision with a broad inventory and local stock in Emmerich — ensures dependable availability and covers a wide range of measurement needs across industry and trade. This dependable sourcing complements the plate’s durability, creating a long-term solution for scale stabilisation. For reliable upgrades to KERN countertop scales, contact Metav Werkzeuge in Emmerich for stock status and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CE.RQ35912 Manufacturer: KERN Material: stainless steel Facts Weight: 6 kg ECLASS: 21130111 Special features Compatible with CT.3000/5000-3Q1 Corrosion-resistant stainless steel Intended for scale stabilisation FAQ Is the plate suitable for all KERN countertop scales? The plate is designed specifically for the CT.3000 and CT.5000 series; compatibility with other KERN models is not specified and should be confirmed against the device’s mounting dimensions. What material is used for the plate and why does it matter? The accessory is manufactured from stainless steel, which provides corrosion resistance and dimensional stability, helping to maintain reliable weighing behaviour over time. How does the plate influence measurement repeatability? By adding approximately 6 kg of mass and lowering susceptibility to vibration, the plate improves stability and reduces short-term reading variability, supporting more consistent results during repeated measurements. Who supplies this accessory and where is it shipped from? The plate is a KERN accessory distributed via Metav Werkzeuge, with fast dispatch from Metav’s European stock to ensure steady supply for industrial and workshop environments. KERN
KERN Stainless Steel Bearing for CT.7500/10000-3Q1 - KERN
Combine corrosion resistance and a solid build to ensure stable load support and long service life for industrial weighing systems; benefit from precise operation and reliable compatibility with CT.7500/10000-3Q1. Order genuine components directly via Metav Werkzeuge or consult our specialists for more details. Bearing for CT.7500/10000-3Q1 by KERN — stainless steel, heavy-duty support The Bearing for CT.7500/10000-3Q1 is a stainless steel support component for industrial scale assemblies, designed to deliver stable load transfer and long-term reliability in demanding workshop and production environments Stainless steel construction for corrosion resistance Designed for CT.7500/10000-3Q1 scale systems Solid build with approx. 8 kg unit weight Manufacturer: KERN quality standard Reliable support for industrial weighing The Bearing for CT.7500/10000-3Q1 features a robust stainless steel construction that resists corrosion and mechanical wear, which helps maintain consistent contact surfaces over time. With a solid mass of 8 kg, the component contributes to a stable mounting base that reduces micro-movements during weighing cycles; the resulting reduction in mechanical noise and disturbance supports more repeatable readings. Designed as an accessory for professional scale assemblies, the unit’s material choice also eases cleaning and supports longevity in humid or chemically active environments, lowering the need for frequent replacements. Precision-enhancing design reduces measurement error Engineered for accurate load transfer, this bearing minimises lateral forces and shear that can otherwise affect the measurement chain. By ensuring a direct and predictable load path into the weighing module, the component supports precision and reduces the frequency of recalibration for production lines and quality-control stations. Produced to KERN’s manufacturing standards, the part is suitable where consistent measurement performance is critical, enabling process stability and fewer interruptions for corrective maintenance. Efficient integration and low-maintenance operation The component’s straightforward interface with CT.7500/10000-3Q1 systems simplifies assembly into existing weighing frames and platforms, shortening downtime during replacements or upgrades. The installation process is clear-cut for workshop technicians, and the corrosion-resistant surface reduces routine servicing requirements, lowering total lifecycle effort. For procurement, selecting a factory-original bearing helps ensure compatibility across the measuring chain and supports dependable operation in industrial and laboratory weighing systems. Secure genuine KERN bearings via Metav Werkzeuge’s Emmerich stock — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and reliable supply from our European quality filter Technical data Article number: CE-RQ SKU: CE.RQ35918 Manufacturer: KERN Material: stainless steel ECLASS: 21130403 Weight: 8 kg Facts Weight (kg): 8 ECLASS ID: 21130403 Special features Compatible with CT.7500/10000-3Q1 Category: Waagen > Zubehör Intended use: accessory for professional scales Origin: manufacturer component for weighing assemblies FAQ What materials is the bearing made from? The bearing is manufactured from stainless steel, providing corrosion resistance and easy cleaning for industrial environments. Is this bearing compatible with my CT.7500/10000-3Q1 scale? Yes, the bearing is specified for use with CT.7500/10000-3Q1 systems and is intended to interface with those scale assemblies. How does the bearing improve measurement performance? By providing a stable, well-defined load path and reducing lateral forces, the bearing supports precision and repeatability in weighing operations. What is the unit weight and why does it matter? The component has an approximate weight of 8 kg, contributing to mechanical stability and reduced sensitivity to external disturbances during weighing cycles. Is special maintenance required for the bearing? Routine maintenance is minimal due to the corrosion-resistant material; periodic inspection and cleaning are typically sufficient to preserve performance. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
KERN Three-Point Load Corner for CT.2500/3000/5000-3P1, Nickel-Plated Steel - KERN
Benefit from the combination of robust nickel-plated steel, precise compatibility with CT series scales and substantial mass for stable weighing — a practical solution that supports reliable measurement routines. Order the load corner directly via Metav Werkzeuge or consult our advisors if needed. Load corner CE.P4025 – load adapter for KERN CT.2500/3000/5000-3P1, nickel-plated steel The load corner is a load adapter for KERN CT series scales, engineered to provide a secure mechanical interface and consistent load transfer in industrial weighing applications. Compatible with CT.2500/3000/5000 series Nickel-plated steel construction Robust 9.39 kg mass for stability Designed for industrial weighing systems Consistent bearing for repeatable measurement results A stable support element reduces measurement scatter and improves traceability of results. The CE.P4025 acts as a rigid corner interface, designed to transmit loads evenly into the weighing module so that repeatable measurements are achieved under varying operational conditions. Its substantial mass contributes to stability on busy workshop floors, reducing vibration-related deviations and helping to maintain calibration integrity over time. This translates into fewer retests and a smoother production process. Durable nickel-plated steel for long service life Constructed from nickel-plated steel, the component combines mechanical strength with corrosion resistance suited to industrial environments. The surface finish eases cleaning and reduces the risk of surface degradation in routine use, while the underlying steel core provides load-bearing capacity without excessive deformation. The result is a component that demands minimal maintenance and offers predictable behaviour across long service intervals, supporting uptime and lowering the total cost of ownership for weighing assemblies. Seamless integration with KERN CT series and workshop workflows Designed specifically for compatibility with CT.2500/3000/5000-3P1 scales, this adapter ensures straightforward mechanical integration and reliable alignment of the weighing module. The dedicated fit reduces assembly time and potential mismatch errors that can affect measurement accuracy. Where production reliability and process control matter, the combination of compatibility and robust construction contributes directly to efficient quality assurance and fewer interruptions in everyday operations. Contact Metav Werkzeuge in Emmerich for advice on KERN load corner CE.P4025 and secure workshop delivery tailored to industrial weighing needs Technical data Article number: CE.P4025 SKU: CE.P4025 GTIN: 4045761220942 Manufacturer: KERN Origin: CN HS code: 84239010 Facts Weight: 9.39 kg Category path: Waagen › Zubehör eClass: 21131725 Special features Material: Steel, nickel-plated Compatible with: CT.2500/3000/5000-3P1 Intended use: Accessory for industrial weighing systems FAQ What is the primary purpose of this load adapter? The load corner CE.P4025 by KERN is intended to provide a secure mechanical interface for CT.2500/3000/5000-3P1 scales, ensuring consistent load transfer and improved measurement repeatability. Is the adapter suitable for harsh workshop environments? Yes, the nickel-plated steel construction of the KERN load corner CE.P4025 offers enhanced corrosion resistance and mechanical durability appropriate for industrial conditions. Will the component affect calibration intervals? By improving load stability and reducing mechanical variability, the CE.P4025 can contribute to longer intervals between recalibration events when installed as part of a correctly configured weighing system. How does the adapter integrate with existing CT series installations? The adapter is designed for direct mechanical compatibility with CT.2500/3000/5000-3P1 scales, simplifying installation and minimising the risk of alignment issues that could impact weighing accuracy. KERN · Origin: China · Manufacturer contact: not provided
KERN YHA-06 Hook With Safety Latch, Galvanised Painted Ductile Iron Accessories Included - KERN
Take advantage of a durable, safety-focused hook that combines robust zinc-plated cast-steel construction with ready-to-fit hardware for fast integration into lifting systems. The secure latch reduces risk during handling while the included shackles and connecting bolt speed up assembly. Order the hook directly via Metav Werkzeuge or contact our consultants for application-specific advice. Hook KERN YHA-06 – safety latch, zinc-plated cast-steel hook The Hook KERN YHA-06 is a zinc-plated and painted cast-steel hook with an integrated safety latch, designed for use with crane scales and lifting equipment where reliable load attachment is required. Safety latch for secure load holding Zinc-plated cast steel, painted finish Supplied with 2 shackles and connector Compatible with KERN HCB crane scales Reduce downtime with a ready-to-fit lifting accessory The robust zinc-plated cast steel construction and painted finish provide corrosion resistance and mechanical durability that keep workshop routines running. Supplied hardware such as two shackles and a connection link means fewer procurement steps and quicker installation on site. For industrial environments where continuity matters, this accessory delivers measurable savings in assembly time while maintaining safe operation. Minimise risk through a positive locking mechanism A built-in safety latch offers secure load retention during lifting and handling, lowering the likelihood of accidental release. This mechanical safeguard is particularly valuable in repetitive lifting tasks or outdoor operations where load movement and vibration are factors. The latch’s design focuses on functional reliability rather than complexity, making inspection and routine checks straightforward. Straightforward compatibility with scale systems and accessories Designed to mate with KERN scale equipment, the hook is noted as compatible with KERN HCB models and suitable for applications involving scales with a weighing range of ≥100 kg. Inclusion of the painted screw bolt and connection link facilitates rapid assembly to most crane-scale suspension arrangements. Where traceability is required, the product’s SKU: YHA-06 and GTIN are available for inventory and compliance records. Contact Metav Werkzeuge at info@metav-werkzeuge.com or on +49 2822 7131930 for tailored technical advice and fast supply from our Emmerich stock Technical data Article number: YHA SKU: YHA-06 GTIN: 4045761208612 Manufacturer: KERN Origin: DE Weight: 1.32 kg Core specifications Weight: 1.32 kg Included shackles: 2 Included connection link: 1 Suitable for weighing range: ≥100 kg Features & compatibility Material: zinc-plated and painted cast steel Safety latch for secure load holding Supplied with 2 shackles, 1 painted screw bolt and 1 hook Compatible with KERN HCB crane scale models FAQ What material is the hook made from? The hook is manufactured from zinc-plated and painted cast steel, providing mechanical strength and corrosion resistance for industrial use. Is the hook supplied with fittings for installation? Yes, the delivery includes two shackles, one painted screw bolt and one connection link for immediate assembly to compatible suspension systems. Can this hook be used with KERN crane scales? The hook is compatible with KERN HCB models and suited for use with scales that have a weighing range of ≥100 kg. Does the hook have a safety mechanism to prevent accidental release? A safety latch is integrated into the design to reduce the risk of unintentional load release during lifting and handling. How should load limits be determined for safe use? Load limits are determined by the rated capacity of the lifting system and the crane scale in use; the hook should be operated within those specified limits to ensure safety. KERN · Germany · Contact not specified in product data
KIB-A06 Signal Lamp, Non-Retrofit, With Interface, 1.04kg - KERN
Take advantage of dependable visual signalling and a built‑in connection option to standardise status feedback across weighing stations; the compact, robust design and clear integration path simplify installation and ongoing operation. Order the unit directly via Metav Werkzeuge or consult our team for application advice. KIB-A06 Signal lamp – indicator light with integrated interface by KERN The KIB-A06 Signal lamp offers clear visual status indication for scales and weighing systems, engineered for workshops and industrial environments where unambiguous signalling is essential. Indicator light for weighing systems Integrated interface for direct connection Non-retrofittable design for fixed installations Fast dispatch from European warehouse Reduce downtime with instant, unambiguous alerts A single, unmistakable visual signal reduces interpretation errors on the shop floor. The signal lamp delivers visual status indication that is immediately recognisable by operators, enabling faster reactions to process events and fewer interruptions. This tangible improvement in workflow clarity translates into measurable time savings on repetitive tasks and fewer inspection delays, supporting continuous production flow. Seamless connection cuts integration effort The built‑in integrated interface means the lamp can be connected directly to compatible weighing systems and control panels without additional adapters. For technical teams this reduces wiring complexity and shortens commissioning time. Where control logic or stack lights are already in place, the lamp’s direct connectivity simplifies electrical planning and keeps installation costs transparent and predictable. Robust design for everyday industrial use Constructed to suit routine workshop conditions, the lamp balances sturdy construction with a compact footprint. The moderate mass of 1.04 kg contributes to a secure mounting and a stable presence on signalling posts or brackets. The fixed‑configuration approach is intended for installations where a permanent signalling solution is required rather than frequent retrofits. Supply reliability and tailored procurement benefits Sourcing through Metav Werkzeuge provides access to centralised stock management and a European distribution point in Emmerich, which supports dependable replenishment and straightforward ordering. The combination of product quality, direct connectivity and consistent supply reduces procurement complexity for maintenance planners and purchasing teams, helping to streamline inventory and supplier consolidation. Contact Metav Werkzeuge today for advice on integrating the KIB-A06 signal lamp into existing weighing systems and to arrange prompt delivery from our Emmerich warehouse via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: KIB-A06 Manufacturer: KERN SKU: KIB-A06 GTIN: 4045761207066 Origin country: CN ECLASS: 27110631 ETIM: EC000399 HS code: 84239010 Facts Weight: 1.04 kg Special features Integrated interface Non-retrofittable Suitable for scales – accessories Category: Zubehör (scales accessories) FAQ What applications is the signal lamp suitable for? The signal lamp is designed for status signalling on weighing systems and station equipment; it fits industrial and workshop environments where clear visual feedback is required. Does the device include a connection interface? Yes, the KIB-A06 from KERN features an integrated interface for direct connection to compatible control hardware. Can the lamp be retrofitted to existing systems? The KIB-A06 has a non-retrofittable design intended for fixed installations rather than incremental retrofitting. What is the weight of the signal lamp and does it affect mounting? The unit weighs 1.04 kg, which supports stable mounting on posts and brackets commonly used in industrial signalling setups. Is the lamp supplied from a European warehouse? Stock and dispatch are managed for fast processing via Metav Werkzeuge’s European distribution channels. Manufacturer: KERN · Address: China · Contact: info@metav-werkzeuge.com / +49 2822 7131930
KXS-A02 Bluetooth Data Interface For Wireless Data Transfer To PC/Tablets, Not For Calibration - KERN
Take advantage of wireless data transfer and a compact, lightweight design to streamline scale data capture and reduce transcription errors; the device also integrates smoothly into existing inspection workflows while noting it is not compatible with legal calibration. Order the KERN interface directly via Metav Werkzeuge or ask our consultants for tailored advice. KXS-A02 Bluetooth data interface — wireless data transfer to PCs and tablets (KERN) KXS-A02 Bluetooth data interface for cable-free transmission of readings from weighing instruments to PCs and tablets, suited to workshop and laboratory data capture Wireless data transfer to PC and tablets Compatible with KERN scales accessory Lightweight: approx. 0.1 kg Not compatible with legal calibration Faster, error‑reduced data capture for weighing processes The Bluetooth accessory connects weighing instruments to PCs and tablets to eliminate manual transcription and accelerate reporting. By enabling direct digital transfer of readings, the interface supports more consistent data logging and reduces the risk of entry errors that can interrupt production or quality assurance routines. Installation is intended to complement existing metrology workflows, providing a clear efficiency uplift where repeated measurements are captured for documentation. Practical integration that keeps workshop routines simple Designed as an accessory for weighing equipment, the unit combines a compact footprint with a lightweight build (approx. 0.1 kg) to avoid interfering with bench setups. The interface supports straightforward pairing with standard computing devices, keeping cabling to a minimum and freeing bench space for measurement tasks. This streamlined connection contributes to measurable time savings during routine checks and batch documentation, enhancing overall operational efficiency without changing established measurement practices. Appropriate applications and a critical limitation to note The interface is particularly useful in quality control, calibration labs (for non‑legal routines), and production monitoring where rapid transfer of weighing data into spreadsheets or inspection systems is required. It is not suitable for use in combination with legal calibration (Eichung); where official trade approvals or sealed-for-trade procedures are needed, alternative certified solutions must be used. For processes focused on consistent measurement and traceable records, the accessory supports better quality control and improved traceability of measurement results. Supply reliability and service from a precision partner Sourcing this accessory via Metav delivers the practical benefit of a dedicated European supply and a quality filter based in Emmerich. Metav combines decades of metrology experience with a broad portfolio — more than 250,000 products — and a long track record of satisfied customers, backed by a client base of over 48,000 customers. That presence ensures dependable availability and an established logistics chain to workshop benches across Europe, reinforcing reliable procurement for precision tools and accessories. Contact Metav Werkzeuge to arrange supply of the KERN KXS-A02 Bluetooth data interface and receive tailored advice from our technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: KXS SKU: KXS-A02 Manufacturer: KERN GTIN: 4045761151871 Origin: CN Tariff code: 84239010 Weight: 0.1 kg Core specifications ECLASS: 19050110 Weight: 0.1 kg GTIN: 4045761151871 Tariff code: 84239010 Design & features Wireless data transmission to PCs and tablets Accessory for weighing instruments Not compatible with legal calibration Lightweight design for workshop use FAQ How does the interface transmit readings to a computer? The interface uses Bluetooth radio to send measurement values from the weighing instrument to a connected PC or tablet, enabling direct capture into software or spreadsheets without manual entry. Can the device be used for official trade calibrations? No — the accessory is not compatible with legal calibration and must not be used where sealed or legally approved weighing procedures are required. Which weighing instruments is it compatible with? The accessory is intended as a KERN scales accessory and integrates with compatible KERN weighing instruments for wireless data transfer. Is the unit portable and suitable for mobile inspection tasks? Yes — its lightweight design (approx. 0.1 kg) and compact form make it suitable for benchtop and portable inspection setups where cable reduction is preferred. What are the identification details for procurement? Refer to the SKU KXS-A02 and GTIN 4045761151871 when ordering or checking compatibility with existing equipment. KERN — Origin: China (CN)
KXS-A03 Foot Switch Non-Retrofittable, For Scales - KERN
The compact design and dependable switching behaviour ensure consistent, hands‑free weighing operations, while the straightforward integration and light weight support efficient workflows in busy production or laboratory environments. Order the Footswitch KXS-A03 directly via Metav Werkzeuge or ask our consultants if needed. Footswitch KXS-A03 — KERN foot control for scales, compact and reliable The Footswitch KXS-A03 provides hands‑free switching for scales and weighing stations in industrial and workshop settings. Footswitch for scale operation KERN manufacturing quality Not retrofittable to other models Faster, repeatable hands‑free operation for weighing tasks The pedal control delivers a hands‑free trigger that stabilises process flow and reduces handling time during repetitive weighing operations. Designed for straightforward actuation, the unit supports consistent cycle times and helps avoid interruptions that can occur when operators must handle controls manually. With its compact footprint and light mass, the device minimises interference at the workplace while maintaining reliable switching behaviour for routine tasks. Designed integration and what “not retrofittable” means for workshops This control is built for direct integration with compatible weighing systems and is not retrofittable, which means retro‑installation to other scale models is not supported. That design choice ensures connector and function compatibility where the unit is specified, reducing the risk of mismatched signalling or unreliable behaviour. For installations where interchangeability is required, opting for a modular interface or confirmed compatibility list is recommended to guarantee correct operation. Low‑effort operation and dependable sourcing for professional environments The pedal switch offers simple mechanical operation with minimal maintenance demands, delivering long periods of use without complex servicing. Supplied by a manufacturer with an established reputation for metrology equipment, the component benefits from controlled sourcing and quality assurance practices that support reliable delivery to production benches and inspection stations. Its compact form factor and straightforward function make it an unobtrusive yet effective accessory for weighted processes. For precise hands‑free control choose the KERN Footswitch KXS-A03 from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for ordering or further technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: KXS-A03 Manufacturer: KERN GTIN: 4045761151895 Country of origin: CN Weight: 0.5 kg Tariff code: 84239010 Special feature: not retrofittable Facts ECLASS: 27371217 SKU: KXS-A03 Asset filename: KXS-A03-main.png Special features Category: Scales accessory (Waagen > Zubehör) Intended use: foot control for weighing equipment Delivery note: rapid dispatch available via reseller channels Origin: China (CN) FAQ What is the primary function of this footswitch? The footswitch KXS-A03 from KERN is a pedal control intended for hands‑free actuation of weighing systems and related scale equipment. Can the KXS-A03 be retrofitted to an existing scale? The KERN KXS-A03 is specified as not retrofittable; it is intended for direct integration where compatibility is confirmed by the scale manufacturer. How heavy is the unit and how does that affect installation? The KXS-A03 weighs 0.5 kg, which supports easy placement and secure mounting without significant load on mounting points. Is this footswitch suitable for industrial workshop environments? Yes, the pedal control is designed for professional weighing and workshop settings, providing simple, low‑maintenance hands‑free operation. KERN, China
KXS-A04 Interface Cable Factory Option, Compatible With Scales - KERN
Reliable data transfer and factory-fitted compatibility keep weighing workflows uninterrupted; the compact, lightweight construction supports tidy installation and easy integration on the shop floor. Order the interface cable directly via Metav Werkzeuge or consult our advisers for technical clarification. KXS-A04 Interface cable (Factory Option) by KERN — reliable data link, compact design The KXS-A04 is a factory option interface cable intended to provide a direct data connection between KERN weighing instruments and external devices, optimising measurement workflows in industrial and workshop environments. Factory option for KERN scales Reliable serial data transmission Compact and lightweight, 0.1 kg Quick integration for weighing systems Keep measurement data flowing with minimal effort The interface cable delivers a straightforward means of transferring recorded values from weighing instruments into production systems or data collectors, reducing manual transcription and the risk of entry errors. As a factory option, the cable is built to match the electrical and mechanical requirements of KERN devices, which simplifies commissioning and avoids time-consuming adaptations. This stabilises data capture across repetitive weighing tasks and supports process reliability in quality-controlled environments. Installation that reduces downtime and clutter Designed for simple routing and a modest footprint, the accessory is compact and weighs only 0.1 kg, allowing neat panel and bench installations without adding bulk. The design prioritises ease of connection so that integration into existing setups can be completed with minimal disruption to production. Clear labelling and a robust connector interface mean less time spent diagnosing connection faults and more time on productive measuring and inspection work. Built for dependable use in metrology workflows As an accessory for weighing systems from KERN, the cable is intended to match professional workshop demands and to be stored or deployed easily as required. Identified by SKU KXS-A04 and GTIN 4045761151901, the component supports a consistent equipment configuration strategy for serialised instruments and spares management. Origin information is recorded as CN, and the design reflects an emphasis on functional reliability and compatibility rather than decorative elements. For dependable integration of KERN weighing instruments, request the KXS-A04 factory option from Metav Werkzeuge — our advisers can confirm fitment and provide procurement guidance via info@metav-werkzeuge.com or by telephone Technical Data Article number: KXS-ACC Manufacturer: KERN SKU: KXS-A04 GTIN: 4045761151901 Country of origin: CN Tariff number: 84239010 ECLASS: 19050112 Weight: 0.1 kg Core Data Weight (kg): 0.1 GTIN: 4045761151901 Tariff code: 84239010 ECLASS: 19050112 Special features Factory option for KERN scales Category: Scales / Accessories Compact, lightweight design SKU: KXS-A04 FAQ Is the cable compatible with KERN weighing instruments? The KXS-A04 is supplied as a factory option for KERN weighing instruments and is intended to match the device interfaces specified by the manufacturer. What is the weight and size consideration for mounting? The cable weighs 0.1 kg and is designed for compact routing and minimal panel space, allowing tidy installations in workshop and production environments. Does the package include any software or drivers? The KXS-A04 provides the physical interface; software or driver requirements depend on the connected system and should be confirmed with the weighing instrument manual or our technical advisers. How is the component identified for stock and procurement? The accessory is listed under SKU KXS-A04 and GTIN 4045761151901, and the article number for ordering is KXS-ACC. KERN – Origin: CN · Distributor contact: info@metav-werkzeuge.com · +49 2822 7131930
Lager for CB.500-3Q1 Stainless Steel - KERN
Reliable stainless-steel bearing designed for accurate load support and long service life; compact 0.5 kg construction makes handling and replacement straightforward. Benefit from a precision-fit component for CB.500-3Q1 scale modules and order directly via Metav Werkzeuge or request advice from our consultants. CE.Q30906 Bearing for CB.500-3Q1 — KERN stainless-steel replacement The CE.Q30906 is a stainless-steel bearing intended as a precision replacement for KERN CB.500-3Q1 weighing modules, suited to industrial scales and calibration workshops. Precision fit for CB.500-3Q1 modules Made from stainless steel Compact weight: 0.5 kg Suitable for industrial scale repairs Consistent measurement through precision engineering The bearing is engineered to provide stable load support in metrology applications, reducing measurement variability in weighing systems. Manufactured from stainless steel, the component delivers a predictable contact interface that maintains alignment under repeated use; this improves repeatability and contributes to reliable process control on the shop floor. By specifying a precision replacement component, maintenance cycles become more deterministic and the risk of drift in calibration-sensitive equipment is lowered. Robust construction that reduces maintenance intervals Corrosion-resistant stainless steel construction offers long-term protection against environmental effects commonly encountered in industrial and workshop settings. The result is a reduction in unplanned downtime thanks to prolonged component life and fewer replacements. The compact mass of 0.5 kg simplifies handling during service interventions, enabling quicker swap-outs with minimal disruption to operations. Fewer interventions translate into lower overall cost of ownership for weighing equipment. Direct compatibility and practical installation benefits Designed specifically for the CB.500-3Q1 module, the bearing ensures a precise mechanical fit that avoids tolerance stacking and alignment errors associated with generic parts. As a dedicated replacement, the unit restores original mechanical conditions for the weighing assembly and supports straightforward installation with standard workshop tools. Where clarification of fitment is required, technical documentation from the scale manufacturer should be consulted; the component's role is to re-establish smooth rotational or load-bearing behaviour within the weighing system. Contact Metav Werkzeuge for expert guidance on KERN replacement bearings and secure reliable delivery from Emmerich to the workshop bench. Technical data Article number: CE.Q30906 Manufacturer: KERN Material: stainless steel Designation: Lager Compatible with: for CB.500-3Q1 Facts Weight: 0.5 kg eClass: 21130403 Special features Precision replacement part for scale modules Corrosion resistance Category path: Waagen > Zubehör SKU: CE.Q30906 FAQ What material is the bearing made from? The bearing is manufactured from stainless steel, providing corrosion resistance and durable performance in industrial weighing applications. Is this bearing compatible with the CB.500-3Q1 module? Yes, the component is specified as a replacement for the CB.500-3Q1 weighing module and is designed to restore the original mechanical fit and function. How does a replacement bearing affect weighing accuracy? Replacing a worn bearing restores stable load support and alignment, which reduces measurement variability and helps maintain the scale’s accuracy and repeatability. Are specialised tools required for installation? Installation typically requires standard workshop tools for removal and refit; precise torque and alignment procedures should follow the scale manufacturer's guidance to ensure correct assembly. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
Lastecke für CB-Q1
Summary and Technical Data for KERN Load corner :Manufacturer: KERNModel: Load cornerOrder now Load corner Online.
M12 Leveling Foot For CT-P1/ P2, Nickel-Plated Steel, ≤2000 kg Capacity - KERN
Reliable support for industrial scales through nickel‑plated steel construction and an M12 thread; compatible with CT‑P1 and CT‑P2 models and rated for nominal loads up to 2,000 kg. Order the levelling foot directly via Metav Werkzeuge or ask our consultants if needed. Levelling foot M12 for CT‑P1/CT‑P2 — nickel‑plated steel, up to 2,000 kg (KERN) A Levelling foot M12 designed as an adjustable support for CT‑P1 and CT‑P2 scales, providing stable alignment and reliable load support in workshop and industrial weighing setups. Nickel‑plated steel construction Compatible with CT‑P1 and CT‑P2 Rated for nominal loads ≤ 2,000 kg Compact M12 thread for secure mounting Stable weighing through robust materials and clear limits The levelling foot is manufactured from nickel‑plated steel, a finish that improves surface resistance against corrosion and abrasion in workshop environments. This adjustable support transfers loads evenly to the floor, reducing measurement noise and uneven wear on weighing equipment. Specified compatibility with CT‑P1 and CT‑P2 models and a declared nominal load limit of 2,000 kg provide clear parameters for safe use; these objective limits help planners and technicians select the correct component without guesswork. The compact design keeps installation space to a minimum while maintaining a dependable support surface. Quick integration and secure mechanical interface Fitted with a standard M12 thread, the component enables straightforward attachment to compatible scale housings or frames. The thread size is a common workshop standard, facilitating rapid replacement or retrofit without special adaptors. At approximately 0.35 kg, the support foot adds minimal mass to assemblies while offering a robust contact point for load transfer. The nickel plating combined with the steel substrate ensures mechanical durability and long service intervals; routine visual inspection and a brief check of thread engagement are sufficient for ongoing reliability. Practical choice for consistent measurement results Designed for industrial weighing and workshop use, this levelling foot reduces lateral movement and helps maintain repeatable load paths, which is essential when precise measurements are required. The simple geometry and corrosion‑resistant finish make the component low‑maintenance, supporting uptime and predictable calibration intervals. As a replacement or spare part from KERN, the support foot is a practical, no‑frills solution where defined load capacity and mechanical stability are priorities. For assured compatibility with CT‑P1/CT‑P2 and dependable workshop weighing, request the KERN levelling foot M12 from Metav Werkzeuge — Metav’s specialists in precision equipment can advise on fit and availability Technical data Article number: CE.P2012 SKU: CE.P2012 Manufacturer: KERN GTIN: 4045761220867 Facts Weight: 0.35 kg Country of origin: CN HS code: 84239010 Special features Nickel‑plated steel Suitable for models CT‑P1, CT‑P2 Compatible with nominal load ≤ 2,000 kg FAQ What models is this levelling foot compatible with? The levelling foot is specified for use with CT‑P1 and CT‑P2 models and is manufactured as a compatible replacement component. What is the maximum nominal load for this support foot? The levelling foot is rated for nominal loads up to 2,000 kg, enabling use on heavier industrial weighing systems within that limit. Which material and finish does the foot have? The component is made from steel with a nickel‑plated finish to improve surface resistance and mechanical durability. How is the levelling foot attached to the scale? Attachment is via an M12 thread, a standard mechanical interface that allows straightforward installation or replacement. Is the levelling foot a original KERN part? Yes, the foot is supplied by KERN and intended as a compatible accessory for the manufacturer’s CT‑P series. Manufacturer: KERN — Country of origin: CN
Pair of Base Plates 1000x1000/1500x1250/1500x1500mm Fixing for Load Cell Platform, - KERN
Stable anchoring for precise weighing: the accessory secures the weighing bridge to the floor, compatible with common bridge plate footprints and designed for rapid installation; order the pair of base plates directly via Metav Werkzeuge or consult our specialists for application advice. Pair of base plates for BFB — floor anchor for weighing bridge, KERN Pair of base plates for stable fixation of a weighing bridge in industrial and workshop environments Pair of base plates for floor anchoring Compatible with plate sizes up to 1500x1500x85mm Quick fixation of weighing bridge to floor Lightweight design, total weight 0.74 kg Secure foundation for repeatable weighing results A reliable weighing process depends on mechanical stability. The pair of base plates provides a defined interface between the scale and the floor, reducing micro-movements that can cause measurement scatter. Designed for use with stationary platforms, the accessory improves repeatability by stabilising the load path of the weighing bridge. Compatibility with footprints from 1000×1000×85 mm up to 1500×1500×85 mm ensures the anchoring solution matches common industrial bridge sizes, helping to maintain consistent results across shifts and operators. Fast fitting that minimises downtime Installation is straightforward and engineered for workshop efficiency. The base-plate pair (BFS-A06N) features a compact form and lightweight total mass (0.74 kg), allowing quicker positioning and bolting with standard toolsets. Because the plates are intended solely for mechanical fixation, they do not alter the metrological behaviour of the scale and so support existing calibration intervals. The result is reduced installation time, minimal production interruption and straightforward retrofitting into established weighing set-ups. Integrates with professional procurement and operations Supplied as an accessory for KERN systems, these mounting plates fit into an organised spare-part strategy and simplify inventory management for maintenance teams. Availability through Metav supports reliable supply from a European stock point, reducing lead times and smoothing workshop logistics. Where consistent throughput and predictable maintenance are priorities, the plates serve as a small but effective component of a controlled weighing workflow. For direct procurement or technical clarification on the KERN BFS-A06N pair of base plates contact Metav Werkzeuge—order via Metav or request tailored advice from our Emmerich-based team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BFS-A06N Manufacturer: KERN GTIN: 4045761180062 Country of origin: CN Facts Weight: 0.74 kg Suitable for plate sizes: 1000×1000×85 mm, 1500×1250×85 mm, 1500×1500×85 mm ECLASS: 21130190 Tariff code: 84239010 Special features Application: Fixation of weighing bridge to floor Compatible with BFB systems Matching accessory for KERN weighing bridges Packaged for workshop logistics FAQ What is the primary function of the pair of base plates? The pair of base plates (BFS-A06N) secures the weighing bridge to the floor, providing a defined mechanical interface that reduces movement and improves repeatability. Which bridge sizes are compatible with these base plates? Compatibility covers bridge plate footprints of 1000×1000×85 mm, 1500×1250×85 mm and 1500×1500×85 mm as specified for the accessory. What is the weight of the KERN BFS-A06N accessory? The total weight for the base-plate pair is 0.74 kg. Is the material specified for the base plates? Material details are not specified in the product data; refer to the KERN product documentation for construction specifics if required. Where is this accessory manufactured? The KERN base-plate pair BFS-A06N is listed with country of origin CN (China). KERN, Country of origin: CN
Pair of Base Plates for NFB, Replacement Accessory - KERN
Take advantage of the combination of precise stability, straightforward installation and reliable supply for uninterrupted weighing operations; order the accessory directly via Metav Werkzeuge or consult our specialists for tailored advice. Foot plate pair BFS-A06 — KERN accessory for NFB scales, stable replacement The Foot plate pair for NFB ensures steady support and repeatable readings for workshop and industrial weighing applications. Compatible with KERN NFB scales Robust replacement for worn feet Quick, tool-friendly installation Suited to workshop and industrial environments Stable support that protects measurement accuracy The replacement foot plates deliver a measured improvement in stability, reducing tilt and minimising variability in repeat weighings. Designed as a direct accessory for NFB series scales, the pair restores the original contact geometry, which helps to maintain factory calibration and consistent results. The emphasis on mechanical steadiness translates to fewer rechecks and smoother process control where precision weighing is required. Fast exchange to reduce machine downtime Fitting the pair is engineered to be straightforward, enabling rapid replacement with standard workshop tools and limiting interruption of operations. The modular nature of the parts means the weighing unit can be returned to service quickly, supporting production continuity and efficient maintenance cycles. Where frequent checks or relocations occur, the low-effort swap contributes directly to higher equipment availability and predictable workflow. Integration in a dependable supply chain As an OEM accessory from KERN, the pair is intended for use with NFB instruments and supplied under the logistics and quality assurance that professionals expect. Sourced via Metav Werkzeuge, the item benefits from a broad selection of metrology products and a secure fulfilment channel from Emmerich, which supports stable replenishment and inventory planning for workshops and industrial buyers. Contact Metav Werkzeuge for procurement and technical guidance on the KERN foot plate pair (SKU BFS-A06); enquiries by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930 ensure rapid clarification of compatibility and delivery options Technical data Article number: BFS-A06 SKU: BFS-A06 Manufacturer: KERN Country of origin: CN Tariff code: 84239010 Core figures Weight: 0.35 kg ECLASS: 21130190 Compatibility and features For use with NFB series scales OEM accessory by KERN Listed in categories: Scales, Accessory Rapid dispatch available from stock FAQ Are these foot plates compatible with all NFB models? The KERN foot plate pair (SKU BFS-A06) is specified for NFB series instruments; verification against the exact NFB variant is recommended to ensure fit. What benefit does the replacement foot plate pair provide? Fitting the foot plate pair restores correct support geometry and improves measurement repeatability for KERN NFB scales. Is special tooling required for installation? No specialised tools are necessary; the parts are designed for straightforward replacement to minimise downtime on typical workshop equipment. Can the foot plates be sourced through Metav Werkzeuge? Yes, the accessory is available via Metav Werkzeuge and can be ordered through the webshop or by contacting the sales team for procurement details. Is the product supplied with mounting hardware? Mounting hardware specifics are not stated; consult the product listing or contact Metav Werkzeuge for confirmation on included components Manufacturer: KERN | Origin: China | Contact via Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930
PCD-A04 24h Internal Battery Operation For PCD.250-3, Rechargeable 10h Charge Time - KERN
Take advantage of the integrated power supply, prolonged operating time and the switchable AUTO‑OFF feature for dependable mobile weighing and uninterrupted workflow; order the accessory directly via Metav Werkzeuge or consult the specialists for compatibility and delivery details. PCD-A04 internal battery pack for PCD.250-3 – up to 24 h runtime, AUTO‑OFF (KERN) The PCD-A04 is an internal battery solution for the PCD.250-3 scale, engineered to provide extended portable operation and to protect battery life with a switchable AUTO‑OFF function. Internal battery operation for scales Up to 24 h runtime without backlight Switchable AUTO‑OFF for battery protection Compatible with PCD.250‑3 scales Dependable mobile power for continuous measurement The integrated internal battery supplies the scale with stable energy, reducing dependence on mains power and allowing scales to remain fully operational during transport or remote use. With a runtime of up to 24 hours without backlight, the pack supports long measurement sessions and reduces interruptions in production checks and quality control routines. This improves process reliability and helps maintain throughput in workshops and inspection stations. Battery protection that saves service time The unit features a switchable AUTO‑OFF function designed to conserve battery life by automatically powering down after inactivity; this setting can be disabled where continuous measurement is required. The compact design and low weight (0.18 kg) keep additional load minimal, making the module suitable for regular handling and installation without affecting scale ergonomics. The result is less downtime for charging cycles and fewer unexpected stops during critical weighing tasks. Clear fit for workshop and quality environments Designed as an accessory for precision scales, the module is intended for professional contexts that demand consistent, mobile weighing capabilities. Compatibility with the PCD.250‑3 range ensures a straightforward integration into existing setups. Backed by KERN manufacturing and distributed via Metav Werkzeuge, the accessory supports a transparent supply chain and dependable stock availability for industrial and trade customers. Contact Metav Werkzeuge for procurement and technical advice on KERN internal battery packs such as the PCD-A04 — email info@metav-werkzeuge.com or call +49 2822 7131930 to secure a reliable supply from Emmerich am Rhein Technical data Article number: PCD-A04 Manufacturer: KERN GTIN: 4045761134188 Country of origin: CN Tariff number: 85075000 Core specifications Battery runtime: up to 24 h (without backlight) Weight: 0.18 kg eClass: 21059207 Features Accessory for scales, intended for internal battery use Product group: batteries / accumulators Switchable AUTO‑OFF function for battery preservation Designed for use with the PCD.250‑3 scale series FAQ Is the battery pack compatible with other scale models? Compatibility is specified for the PCD.250‑3 series; the PCD-A04 is designed as the internal power option for these models and should be verified against other models before use. How long will the battery keep the scale operating? When used without the display backlight, the internal battery provides operation for up to 24 hours under typical conditions. Can the AUTO‑OFF function be turned off? Yes, the AUTO‑OFF feature is switchable so that automatic shutdown can be disabled where continuous operation is required. Is the battery pack supplied ready to install? The module is supplied as an internal accessory for the PCD.250‑3; installation should follow the scale manufacturer’s instructions to ensure correct fitting and safety. Who manufactures the battery pack and where is it produced? The module is manufactured by KERN with origin indicated as China and distributed through Metav Werkzeuge for the European market. Manufacturer: KERN; Supplier: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com | +49 2822 7131930
PCD.250-3 Foot Switch Tare/Print Control (RS-232 Cable Required), With Junction Box & Cable - KERN
Take advantage of hands-free operation combined with selectable TARE or PRINT control and a compact, workshop-ready design for faster weighing cycles. Order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKF-01 Foot switch for PCD.250-3 — KERN, selectable TARE/PRINT control The YKF-01 is a foot switch designed to enable hands-free TARE or PRINT signalling for compatible scales, optimised for busy workshop and production environments where two free hands are required. Hands-free TARE or PRINT control Includes foot switch, junction box and cable PRINT function requires RS-232 interface cable Compact 0.25 kg unit for workshop use Faster, hands-free weighing for more efficient workflows The foot switch allows rapid, repeatable triggering of weighing functions so operators can keep both hands on the workpiece. By providing selectable TARE and PRINT outputs the device reduces cycle times and the risk of contamination from manual intervention. The PRINT option is suitable for automated data capture but requires a dedicated RS-232 interface cable for full functionality, ensuring reliable data transfer to printers or PC systems. This solution is ideal for repetitive tasks and for setups where ergonomics and speed are priorities. Simple installation that integrates without fuss Connection is simplified by the supplied junction box and connection cable, which are designed for straightforward wiring to compatible indicators. The unit’s compact form and low mass (0.25 kg) permit installation close to the operator without adding bulk to the workstation. Compatibility with scale models such as the PCD.250-3 is maintained through a standardised interface approach, so existing systems can be extended without major adaptation. Where the print function is required, the separate RS-232 cable (KERN interface cable) completes the link to peripherals. Dependable partner for professional environments The YKF-01 foot switch from KERN is built for continuous workshop use and supports consistent process control in industry and craft applications. Metav Werkzeuge provides distribution and expert advice, backed by decades of precision competence and a broad product portfolio, helping to reduce supplier complexity. The supplied components are clearly stated in the scope of delivery to set expectations and support straightforward commissioning of the accessory in production or inspection workflows. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKF-01 foot switch into your weighing setup and to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: YKF-01 Manufacturer: KERN Scope of delivery: foot switch, junction box, connection cable Facts Weight: 0.25 kg ECLASS: 27371217 Special features Selectable TARE or PRINT control PRINT function requires RS-232 interface cable (not included) Compatible with PCD.250-3 Category: Scales accessory FAQ Is the foot switch compatible with the PCD.250-3? The YKF-01 foot switch (KERN) is designed for compatibility with the PCD.250-3 and connects via the supplied junction box and connection cable. Is an RS-232 cable included for printing? No, the YKF-01 includes the junction box and connection cable; the RS-232 interface cable required for the PRINT function must be obtained separately (KERN interface cable). What functions can be triggered with the foot switch? The device can trigger TARE or PRINT functions; switching between these modes is supported by the unit’s signalling options. How heavy and compact is the unit for bench mounting? The YKF-01 foot switch weighs 0.25 kg and is deliberately compact for convenient mounting near the weighing station. What is included in the delivery when ordering the foot switch? Delivery contains the foot switch, a junction box and a connection cable as stated in the product’s scope of delivery. KERN — Manufacturer. Distributor: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930
Power Supply Adapter 230V Monitorable For DIN Rail Mounting, CE HS Compatible - KERN
Take advantage of a compact, monitorable mains adapter that delivers stable voltage to CE HS weighing systems while keeping installation time and service interruptions to a minimum; order directly via Metav Werkzeuge or consult our specialists for tailored support. Mains adapter CE.HSS – DIN‑rail monitorable power supply for CE HS by KERN The Mains adapter CE.HSS is a compact power supply engineered to provide a stable mains feed for CE HS series weighing instruments, offering DIN‑rail monitoring and reliable operation in workshop and industrial environments. DIN‑rail monitorable design Compact 0.15 kg housing Compatible with CE HS scales Genuine KERN accessory Stable power to support accurate weighing results A regulated output and stable voltage reduce fluctuations that can affect measurement precision, so the weighing process remains consistent even under variable mains conditions. The adapter is designed as a dependable power supply for scale electronics, limiting reset cycles and potential downtime. By ensuring a steady feed to the weighing electronics, this unit contributes directly to reproducible readings and controlled production workflows. Fast integration with DIN‑rail monitoring for diagnostics The DIN‑rail format allows direct mounting in control cabinets and switchgear, while the monitorable feature enables system diagnostics and status checks without dismantling the installation. The compact construction and low mass (0.15 kg) simplify retrofits and new installations alike, reducing fitting time and saving panel space. Where remote supervision is required, the monitorable design supports preventative maintenance plans and a transparent production environment. Built to match industrial weighing requirements Designed as an original KERN accessory for CE HS weighing systems, this adapter aligns with the expectations of workshop and industrial users who need a dependable mains solution. The construction focuses on essential characteristics — compact footprint, straightforward mounting and clear compatibility with CE HS instruments — to streamline procurement and maintenance processes. Integration with existing weighing setups is straightforward, maintaining the precision levels demanded in metrology applications. For dependable power supply solutions for your scales, choose the KERN CE.HSS mains adapter and contact Metav Werkzeuge in Emmerich for expert advice and supply from our European quality hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CE.HSS GTIN: 4045761236073 Manufacturer: KERN eClass: 21059206 Tariff code: 84239010 Country of origin: CN Facts Weight: 0.15 kg GTIN (numeric): 4045761236073 eClass (numeric): 21059206 Tariff code (numeric): 84239010 Special features Monitorable on DIN‑rail For power supply of CE HS weighing systems Category: Scales › Accessories FAQ Is the adapter compatible with CE HS series weighing instruments? The CE.HSS mains adapter is specified for the power supply of CE HS weighing systems and is presented as a genuine KERN accessory for those devices. Can the adapter be mounted on a DIN rail in a control cabinet? Yes, the unit is designed to be mounted on a DIN‑rail and includes monitorable functionality for integration into switchgear. How heavy is the power adapter for planning cabinet space? The adapter weighs 0.15 kg, offering a compact option that conserves panel and cabinet space. Does this adapter support remote monitoring or diagnostics? The monitorable design enables status checks and supports diagnostic workflows when integrated into a compatible control or monitoring setup. What identifies the product for ordering and logistics? Key identifiers include article number CE.HSS and GTIN 4045761236073, which are useful for procurement and inventory systems. Manufacturer: KERN, Country of origin: CN
Red Polyurethane Steering Wheel Pad For Scales, Low Abrasion Finish - KERN
Take advantage of a resilient red polyurethane surface and low‑abrasion design to protect bright floors while maintaining straightforward handling; order the component via Metav Werkzeuge or consult our specialists for matching accessories and supply from Emmerich. VHB-A02 steering wheel — red polyurethane, low‑abrasion design by KERN A VHB-A02 steering wheel supplied as a red polyurethane placement accessory for scales and workstations, developed to offer a durable contact surface where visible floor abrasion must be minimised Red polyurethane surface Low abrasion on light floors Compact 1.6 kg construction KERN quality accessory Robust material that reduces visible wear Made from red polyurethane, the component delivers a hard‑wearing contact surface that resists everyday mechanical stress while remaining forgiving against delicate surfaces. The choice of polyurethane provides a balance between durability and surface protection: it reduces the tendency for scuffing and leaves fewer visible abrasion marks on bright floors, which is especially useful in weighing stations and production areas where appearance and cleanliness matter. The resilient material also dampens minor impacts, helping to protect sensitive equipment. Practical handling for busy workshops With a mass of 1.6 kg, the unit is easy to position, remove and reallocate across different workstations, making it a practical accessory for mobile weighing setups and fixed benches. The moderate weight supports quick reconfiguration of production lines and simplifies manual handling without the need for lifting aids. Paired with its compact footprint, this accessory contributes to efficient workflows by enabling rapid placement and repeatable positioning on existing scales and benches, supporting consistent operational routines. Designed for metrology environments and long service life Produced by KERN, the design aligns with demands of industrial metrology and weighing applications: a stable, consistent interface that helps preserve both the underlying floor finish and the contact surfaces of scales. The construction minimises debris retention and is compatible with standard cleaning practices used in workshops and laboratories. Procurement through an established distributor ensures reliable supply and traceability, supporting uninterrupted operations and predictable maintenance cycles. Partner benefits and supply reliability Sourcing through a specialist distributor ensures that the product reaches the bench quickly and in consistent quality. Metav Werkzeuge operates a central quality filter in Emmerich, combining decades of specialist knowledge with a broad portfolio that simplifies procurement and reduces supplier complexity. The result is dependable availability and a sourcing route that supports both small workshops and larger industrial users seeking consistent, quality‑assured accessories. Contact Metav Werkzeuge in Emmerich for tailored advice on application and supply; email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support and delivery from our warehouse Technical Data Article number: VHB SKU: VHB-A02 Manufacturer: KERN Facts Weight: 1.6 kg eClass: 21131920 Special features Material: red polyurethane Application: accessory for scales and workstations Floor suitability: bright floors, leaves fewer visible abrasion marks Category: Waagen › Zubehör Image: VHB-A02-main.png FAQ What is the main material of the component and why is it chosen? The product uses red polyurethane, selected for its balance of durability and surface protection; the material reduces visible abrasion on bright floors while providing a resilient contact surface. Is this accessory compatible with standard industrial scales? Yes, the accessory is intended as an addition for scales and workstations; the KERN‑manufactured design is suitable for typical weighing environments where a protective placement pad is required. How heavy is the unit and is it easy to handle? The unit weighs 1.6 kg, which allows for simple manual handling and quick repositioning across benches and mobile weighing stations. Can the surface be cleaned using standard workshop methods? The polyurethane surface is compatible with standard cleaning practices used in laboratories and workshops; routine cleaning preserves the surface appearance and function. Who supplies the product and where is it dispatched from? Supply is managed via Metav Werkzeuge with distribution from Emmerich, ensuring quality control and reliable delivery. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com