Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
Rollenbahn
Technical Data:Manufacturer: KERNSeries: YROModel: Roller conveyorMaterial: Aluprofil-RahmenSize: 405x305x130 mm - 655x505x130 mmOrder your new Roller conveyor now Online!
RS-232 Y Cable Data Interface, Incl. Connection Cable - KERN
Reliable RS-232 connectivity, Y-split capability and a compact 0.1 kg design deliver straightforward integration into weighing setups; order the KERN CCA-A01 directly via Metav Werkzeuge or consult our specialists for detailed application advice. Y-cable RS-232 CCA-A01 — KERN Y-split interface for scales The Y-cable RS-232 CCA-A01 is a compact RS-232 Y-split interface designed to link weighing instruments with multiple peripherals in industrial and workshop environments. RS-232 Y-split for parallel connections Includes interface cable for scales Compact design, weight 0.1 kg Seamless, reliable data transfer for efficient workflows The cable provides a straightforward solution for serial communication in weighing applications by using the established RS-232 protocol. As an accessory intended for balances and scales, the Y-split arrangement allows one serial output to be duplicated to two inputs where device implementations permit, helping to maintain traceable data records without repeated manual transcription. The low mass and simple form factor make mounting and routing within cabinets or on benches uncomplicated, supporting uninterrupted process flows and reducing handling time. Simple integration with existing weighing equipment Designed as an accessory in the scales category, this interface cable supports fast installation and tidy cable management in production and laboratory environments. The compact construction aids compatibility with crowded instrument panels and helps to keep data lines short and well routed, which supports signal integrity. Where system documentation is available, the KERN label and the SKU make procurement and inventory management easier for purchasing departments and stores of spare parts, promoting efficient stocking and rapid replacement when needed. Supports quality assurance and operational continuity By enabling parallel connections, the cable assists in linking a weighing instrument simultaneously to recording devices, printers or data acquisition systems, which strengthens measurement traceability and audit capability. The accessory’s design focus on function and simplicity contributes to operational uptime and consistent data capture, aligning with the demands of industrial workflows that require dependable interfaces. The compact footprint and light weight further reduce the risk of strain on connectors and fixtures, making the cable a practical component in long-term measurement setups. Contact Metav Werkzeuge today to discuss the KERN CCA-A01 RS-232 Y-cable and secure the right interface solution for your weighing processes — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and fast supply. Technical data Article number: CCA-A01 Manufacturer: KERN Origin: CN Facts Weight: 0.1 kg ECLASS: 19050111 Tariff number: 84239010 Special features Interface: RS-232 Y-split Category: Scales accessories Includes interface cable FAQ What does a Y-split RS-232 cable do? A Y-split RS-232 cable duplicates the serial signal so a single RS-232 output can be connected to two compatible inputs; the KERN CCA-A01 is intended for such parallel connections in weighing setups. Is the KERN CCA-A01 suitable for industrial balances? The CCA-A01 is produced by KERN as a scales accessory and is suitable where the balance and peripherals implement standard RS-232 signalling; compatibility should be checked against device manuals. Will the cable affect measurement accuracy? The cable itself does not change weight measurement results; using the KERN CCA-A01 simply enables simultaneous data transfer to recording or printing devices, supporting traceability without altering the instrument’s readings. How compact is the interface for panel routing? With a light design and small footprint, the cable is intended for tidy routing on benches and in instrument cabinets, helping to maintain signal integrity and neat installations. KERN — Country of origin: CN
RS-485 Data Interface Non-Upgradable, For Scales Accessories - KERN
Reliable serial connectivity and a compact form factor ensure dependable data transfer for industrial weighing applications; the RS-485 interface offers robust signal integrity while the module’s light weight supports simple installation. Take advantage of the combination of dependable performance, seamless system integration and KERN’s build quality. Order the RS-485 data interface directly via Metav Werkzeuge or ask our consultants if needed. KXS-A01 RS-485 Data Interface (Serial Connectivity, Compact Design) by KERN KXS-A01 RS-485 Data Interface is a compact serial module for integration into industrial weighing setups, enabling reliable digital transmission between scales and host systems. RS-485 serial data transmission Compact, lightweight design 0.1 kg Designed for direct integration, not retrofittable Manufacturer quality: KERN standard Robust serial connectivity for reliable weighing data The RS-485 connection provides a proven method for long-distance, noise-resistant data transfer in industrial environments. As an industrial-grade serial interface, the module concentrates on stable signal routing and minimal interference, which reduces retransmissions and data errors. The assembly’s compact footprint and negligible mass (0.1 kg) keep the hardware load low and simplify mechanical integration into existing instrument housings. For production environments where consistent readouts are critical, the unit supports dependable communication between weighing instruments and automation or data-logging systems. Integration optimised for system compatibility and uptime Designed for direct installation into compatible weighing instruments, the module prioritises straightforward electrical and logical integration. The serial interface is intended to plug into RS-485-capable hosts and leverages balanced differential signalling to maintain signal integrity across longer cable runs. Because this variant is not retrofittable, the module is best specified at the point of instrument ordering or during planned upgrades, ensuring hardware and firmware alignments are met and reducing unforeseen downtime during installation. Operational benefits that drive production efficiency Using a dedicated RS-485 interface reduces the need for intermediate converters and cuts points of failure in data paths, which translates into measurable workflow gains. The result is improved throughput and fewer interruptions to measurement logging or process control—advantages that contribute directly to operational efficiency. Where traceability and repeatable measurement records are required, the interface supports stable serial communication that helps downstream systems maintain accurate logs and comply with data-handling procedures. Quality and supply reliability for precision environments KERN’s reputation for measurement technology is reflected in this interface’s engineering choices, with emphasis on durable connectors and consistent electrical performance. For buyers seeking a partner that couples product reliability with dependable supply, Metav Werkzeuge acts as a quality filter for the European market; the arrangement supports predictable procurement and ongoing availability for production use. This makes the interface a pragmatic option for workshops and industrial users who prioritise long-term equipment dependability. For tailored integration of the KXS-A01 RS-485 data interface, contact Metav Werkzeuge for procurement guidance and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KXS-A01 SKU: KXS-A01 Manufacturer: KERN Designation: Datenschnittstelle RS-485 Core technical data Weight: 0.1 kg EClass: 19050111 Special features RS-485 serial interface Not retrofittable Intended for integration into weighing instruments Compact, lightweight module FAQ What is the primary function of this interface? The RS-485 data interface provides serial communication between weighing instruments and host systems, enabling stable digital data transfer for logging or control. Can the interface be retrofitted into existing scales? No, the module is specified as not retrofittable and is intended for direct integration during original equipment configuration or planned upgrades. Which systems are required to use the interface? A host device or controller with RS-485 compatibility is required; the interface implements balanced differential signalling for industrial data lines. How heavy is the interface module? The KXS-A01 weighs approximately 0.1 kg, supporting minimal mechanical impact on the host instrument. Who manufactures this interface and what is the SKU? The module is manufactured by KERN and marketed under SKU KXS-A01. KERN — address and contact details not provided
Schäkel für Kranwaage
Technical Data and Summary for KERN Shackle :Manufacturer: KERNSeries: YSCModel: ShackleMaterial: Feuerverzinkter Stahlgussbügel, geschweifte FormOrder your new Shackle now Online!
Separate Secondary Display for PFB.120‑3, Not For Open Retail Locations - KERN
Take advantage of the combination of KERN build quality, compact lightweight design and seamless system compatibility to achieve clear remote readout without changing the weighing base instrument; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. PFB-A08 Separate second display — compact remote readout for PFB.120-3 (KERN) The PFB-A08 is a dedicated separate second display for the KERN PFB.120-3 weighing system, intended to provide a clear remote readout in professional weighing environments Remote readout for PFB.120-3 compatibility Compact housing, lightweight 0.5 kg Industrial-grade quality by KERN Simple integration with existing systems Improved visibility that speeds up processes A dedicated remote readout reduces errors and streamlines workflows by allowing the display to be positioned where measurements are easiest to see. Designed for compatibility with the PFB.120-3, this accessory keeps the weighing transmitter in its usual location while offering a secondary, easily readable output point. The arrangement improves operator ergonomics and shortens cycle times in busy production or inspection areas, contributing to measurable productivity gains. Compact, robust construction for professional use The unit's compact housing and lightweight build make it suitable where space is limited or where a discreet secondary display is required. Produced under the KERN product standard, the accessory emphasises durability and a professional finish that fits industrial and workshop settings. The low mass simplifies mounting and reduces load on brackets or stands, while the construction supports continuous operation typical of commercial weighing applications. Straightforward integration and intended application Integration with the primary weighing instrument is designed to be direct and practical, enabling rapid deployment within existing setups without complex alterations. The second display is intended for closed professional installations and is not permitted for open retail outlets, a restriction that safeguards compliance with specific sales regulations. For environments that demand clear readouts away from the scale itself, this accessory offers a focused solution that enhances process clarity and traceability. Specify the KERN PFB-A08 via Metav Werkzeuge for professional remote readout and arrange delivery from Emmerich; Metav’s consultants are available to advise on system compatibility and availability Technical Data Article number: PFB-A08 Manufacturer: KERN SKU: PFB-A08 Category: Scales > Accessories Compatibility: for PFB.120-3 Special note: not permitted for open retail outlets Facts Weight: 0.5 kg Tariff code: 84239010 ECLASS: 21170401 Special features Designation: Separate second display Intended for: PFB.120-3 Origin: China Article group: Accessories for scales FAQ Is the second display compatible with models other than PFB.120-3? The KERN PFB-A08 is specified for the PFB.120-3; compatibility with other models is not guaranteed by the product specification. Can the display be used in an open retail environment? No, the separate second display is not permitted for open retail outlets and is intended for professional, closed installations. What is the weight and mounting implication for the accessory? The KERN PFB-A08 weighs 0.5 kg; its light weight reduces mounting load but mounting details depend on the main instrument and installation hardware. Is the accessory suitable for industrial production areas? Yes, the separate second display is designed for professional weighing setups and manufactured to standards appropriate for industrial use. KERN; Origin: China; Manufacturer contact not provided in product data.
Set zur Dichtebestimmung für PBS
KERN Set for density determination Overview and Technical Data:Manufacturer: KERNSeries: PBSModel: Set for density determinationOrder now Set for density determination Online.
Set zur Dichtebestimmung mit Dichte ≤/≥ 1
Set zur Dichtebestimmung von Flüssigkeiten und Feststoffen mit Dichte ≤/≥ 1 Lieferumfang: Wägeplatte Becherglas (H×∅ 71×51 mm) Probenhalter Senkkörper
Software Balance Connection SCD-4.0 Data Interface For Scales - KERN
Reliable connectivity and dependable delivery combine to streamline measurement workflows for professional users. The KERN software package provides consistent balance integration and straightforward deployment, backed by fast dispatch from stock. Order the Software Balance Connection directly via Metav Werkzeuge or ask our consultants if needed. Software Balance Connection (SCD-4.0) — KERN balance connectivity software, fast dispatch The Software Balance Connection (SCD-4.0) is a KERN software package for connecting professional balances to workshop and laboratory data systems, intended as an accessory for precision weighing equipment. KERN compatibility for professional balances Rapid dispatch from Emmerich warehouse Streamlines balance data handling Available as SKU SCD-4.0 Reliable integration for professional workflows The Software Balance Connection (SCD-4.0) delivers reliable interfacing for measurement equipment used in routine and documented processes. By providing stable connectivity between weighing instruments and data infrastructure, the module reduces interruptions and supports uninterrupted production reporting. Technical consistency from a recognised manufacturer such as KERN means fewer unexpected compatibility issues and a predictable integration path for workshops and laboratories that depend on exact mass values. Reduce manual entry and improve traceability Facilitating direct transfer of weighing results into data systems enhances efficiency and lowers transcription errors, which in turn improves record accuracy and operational throughput. The utility simplifies data handling in environments where repeatable documentation is required, allowing staff to focus on value-adding tasks rather than manual logging. For businesses aiming to optimise quality control and traceability, the practical benefit is a measurable reduction in administrative workload combined with clearer audit information. Supply certainty and local support from Emmerich Metav Werkzeuge represents a dependable supply channel for precision tools and software, combining broad stockholding with a strong quality filter for the European market. The relationship between supplier and manufacturer ensures accessible servicing and transparent order processing, supporting the democratisation of precision: affordable, high-quality measurement technology for workshops and industry. With more than 48,000 customers relying on consistent delivery and professional advice, procurement is simplified and continuity of supply is reinforced. Contact Metav Werkzeuge for tailored advice on integrating the KERN Software Balance Connection (SKU SCD-4.0) or to arrange rapid dispatch from our Emmerich hub. Technical Data Article number: SCD SKU: SCD-4.0 GTIN: 4045761207622 Manufacturer: KERN Origin: DE ECLASS: 21160592 Tariff code: 85234910 Facts Weight: 0 kg GTIN: 4045761207622 ECLASS: 21160592 Tariff code: 85234910 Special features Category: Scales accessories Delivery medium: CD Rapid dispatch from warehouse Product images available FAQ Is the software compatible with KERN balances? Yes. The Software Balance Connection is designed for compatibility with professional KERN weighing instruments and carries the SKU SCD-4.0 for clear identification. How is the product delivered? The product is supplied on CD as indicated by the product specification (bezeichnung_2: CD) with rapid dispatch from stock in Emmerich. Which identification codes are provided for procurement and inventory? Procurement can reference GTIN 4045761207622, ECLASS 21160592 and tariff code 85234910 for the KERN Software Balance Connection (SCD-4.0). Is the product intended for workshop and laboratory use? Yes. The module is listed under scales accessories and is suitable for integration into workshop and laboratory data workflows where precise weighing data must be captured reliably. KERN — Germany — Sold via Metav Werkzeuge, Emmerich. info@metav-werkzeuge.com / +49 2822 7131930
Stabiler Grubenrahmen
KERN Stable pit frame Technical Data: and Detail Information:Manufacturer: KERNSeries: BICModel: Stable pit frameMaterial: Stahl, pulverbeschichtetOrder your new Stable pit frame now Online!
Stabiler Grubenrahmen für BFB
Additional Information and Technical Data for KERN Stable pit frame :Manufacturer: KERNSeries: BFSModel: Stable pit frame für BFBMaterial: Stahl, lackiertAblesbarkeit:Setting standard:Ideal for: Modelle mit Wägenplattengröße 1000x1000x85mm or Modelle mit Wägenplattengröße 1500x1500x85mm depending on the modelOrder now Stable pit frame Online.
Stainless Steel 300g Removable Precision Weighing Platform, Easy-Clean - KERN
Take advantage of a stainless-steel, removable weighing surface that keeps processes hygienic and reduces cleaning time; the lightweight construction supports quick replacements and steady production flow. Order the component directly via Metav Werkzeuge or consult our advisors for tailored compatibility details. FCE-A01 Stainless-steel Weighing Plate by KERN — removable and easy to clean The FCE-A01 is a stainless-steel weighing plate designed as a robust, removable platform for professional scales, combining hygienic surfaces with straightforward handling for industrial and workshop environments. Stainless-steel construction for durability Removable design for quick handling Easy to clean surface, hygienic maintenance Compatible with KERN scale accessories Maintain precise measurement performance with a hygienic platform A clean and stable load surface is essential for reliable results; the stainless steel construction resists corrosion and contaminant build-up, preserving measurement precision across repeated cycles. The platform’s robust build reduces wear on scale load cells by providing a consistent contact area, which helps to maintain calibration stability. For regulated environments where cleanliness matters, the polished surface simplifies routine maintenance without affecting accuracy. Reduce downtime through practical, lightweight handling The detachable format allows quick removal and replacement during cleaning or process changes, supporting uninterrupted workflows. The lightweight nature enables fast handling by workshop staff and minimises the time required for servicing a scale, which in turn lowers process interruptions. Simple removal also shortens inspection intervals and supports hygiene protocols, delivering a measurable efficiency gain in daily operations. Designed for integration in professional weighing setups As a dedicated scale accessory, this weighing plate fits into systematic workshop arrangements where durability and sanitation are priorities. The component is manufactured by KERN, a brand recognised in precision instruments, and the unit’s compact mass facilitates retrofitting across compatible models. The platform’s hygienic surface and removable design combine to provide a pragmatic solution for production lines, quality control benches, and processing areas where clean operation is non-negotiable. Contact Metav Werkzeuge today to request the KERN FCE-A01 stainless-steel weighing plate for reliable, hygienic operation and rapid replacement planning. Technical data Article number: FCE-A01 GTIN: 4045761147409 Manufacturer: KERN eClass: 27329290 Core specifications Weight: 0.3 kg Category: Scale accessory Materials and special features Material: Stainless steel Removable platform Easy to clean surface Robust construction FAQ What is the FCE-A01 used for? The FCE-A01 is a stainless-steel weighing plate intended as a removable platform for professional scales, providing a hygienic contact surface and stable load distribution. Is the platform compatible with KERN scales? Yes, the component is produced by KERN and designed to integrate with KERN scale accessories; compatibility can be confirmed with model details. How should the weighing plate be cleaned? The stainless-steel surface allows routine cleaning with standard non-abrasive agents; the removable design simplifies access and accelerates maintenance. Does the FCE-A01 affect weighing accuracy? When correctly fitted, the platform supports consistent load distribution and helps preserve the calibration stability of the scale, contributing to reliable measurement results. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930, WhatsApp +49 170 2837271
Stainless Steel Bearing for CT-Q1 Accessory, - KERN
Take advantage of a robust stainless steel support that is specifically matched to the CT‑Q1 system and manufactured by KERN; the construction delivers long-term corrosion resistance and dependable mechanical stability. Order genuine components directly via Metav Werkzeuge or consult the technical team for compatibility questions. Bearing for CT‑Q1 — KERN stainless steel support for weighing systems The Bearing for CT‑Q1 is a stainless steel support component designed to provide stable mounting and reliable performance within KERN CT‑Q1 weighing assemblies. Stainless steel construction, corrosion resistant Compatible with CT‑Q1 weighing modules Robust support, approx. 2 kg mass Manufacturer: KERN — industry‑grade reliability Durable stainless steel construction for longevity Constructed from stainless steel, this support offers high corrosion resistance and dimensional stability in standard industrial environments. The choice of material reduces the risk of surface degradation and helps maintain mechanical integrity over time, which supports continuous operation of weighing setups. This durability translates into fewer replacements and lower lifecycle interruptions for production or workshop applications, while the solid build contributes to consistent mechanical behaviour under routine loads. Stable support that preserves weighing accuracy Designed to interface with CT‑Q1 frames and modules, the component provides a steady support surface that aids in the preservation of precision across measurement cycles. A stable mechanical connection helps to reduce unforeseen deflections or misalignments that can influence scale readouts. The bearing's compatibility with the CT‑Q1 series ensures straightforward integration into existing assemblies, facilitating reliable performance in both calibration and daily use without complex adaptation. Sourced reliability and traceable supply for professional use As a KERN component, the support benefits from established manufacturing quality and traceability. Supplied via Metav Werkzeuge, the part passes a central quality filter based in Emmerich, offering buyers a consistent standard of sourcing for industrial metrology accessories. The combination of a recognised manufacturer and Metav's distribution network supports dependable availability for workshops and trade customers seeking genuine replacement or upgrade components. Secure a genuine KERN bearing through Metav Werkzeuge — request technical confirmation or order via info@metav-werkzeuge.com or call +49 2822 7131930 to ensure exact compatibility with existing CT‑Q1 installations Technical Data Article number: CE.RQ35909 Manufacturer: KERN SKU: CE.RQ35909 Material: stainless steel Facts Weight: 2 kg eClass: 21130403 Special features Compatible with CT‑Q1 Corrosion‑resistant material suitable for industrial use Image asset available: CE-Q30906-main.png FAQ What material is the bearing made of? The bearing for CT‑Q1 is made from stainless steel to provide corrosion resistance and mechanical stability in workshop environments. Is this component compatible with existing CT‑Q1 modules? Yes, the KERN bearing is specified for use with CT‑Q1 weighing modules and is supplied to match the system's mounting requirements. How heavy is the support? The support has a mass of approximately 2 kg, which contributes to a stable mounting base for weighing assemblies. Does the bearing affect measurement precision? A secure and stable support reduces mechanical variation; the KERN bearing is intended to support consistent measurement performance when installed with CT‑Q1 modules. Manufacturer: KERN; Supplier: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com / +49 2822 7131930
Stativ 330m oder 600mm
KERN Support 330m oder 600mm, Detailled Information and Technical Data:Manufacturer: KERNSeries: IFBModel: SupportOrder your new Support now Online!
Stativ für SFE
Technical Data and additional information for KERN Support für SFE :Manufacturer: KERNSeries: SFEModel: SupportOrder now Support Online.
Stativ für SXS und IXS
Technical Data and additional information for KERN Support für SXS und IXS :Manufacturer: KERNSeries: IXSModel: SupportSupport quick and easy order Online!!
Temperature Calibration Kit 160mm Probe With Analyzer, Includes Sensor – KERN
Take advantage of precise, repeatable temperature checks with the compact KERN calibration kit that is compatible with DLB.160-3A and includes a measuring probe with an evaluation unit. The lightweight design (0.1 kg) makes handling straightforward, while the complete set reduces calibration downtime. Order directly via Metav Werkzeuge or consult our specialists for integration advice. KERN Temperature calibration set DLB-A01N – compatible with DLB.160-3A, includes probe & readout Temperature calibration set DLB-A01N for quick verification of scale temperature sensors and routine calibration tasks on DLB.160-3A devices Calibration set for DLB.160-3A compatibility Includes measuring probe and evaluation device Compact and lightweight at 0.1 kg Manufacturer: KERN, origin Italy Consistent calibration for routine temperature checks A calibrated verification tool is essential for reliable measurement chains. This temperature calibration set combines a purpose-made measuring probe with an integrated evaluation device, enabling fast cross-checks of sensor readings on compatible weighing systems. By providing a defined reference and a clear readout, the set helps to maintain measurement consistency across shifts and operators and to identify sensor drift before it affects processes. The compact format supports frequent verification without adding workflow complexity. Straightforward handling and clear readout for technicians The included evaluation device offers an immediate, legible display of the measured value, simplifying the interpretation of results during routine inspections. As the kit is light and portable (0.1 kg), it is suited to busy workshop or laboratory environments where quick verification is required between production runs. For those less familiar with calibration terminology: the evaluation device converts the sensor input into a calibrated temperature value, displayed for rapid assessment, reducing the need for time-consuming manual calculations. Practical advantages for workshops and instrument rooms Produced by KERN, the set is intended as an accessory to weighing systems and sensor checks, making it appropriate for maintenance teams and quality departments that require dependable temperature verification. Its compatibility with DLB.160-3A models ensures direct integration into existing equipment setups without additional adapters. The kit supports operational efficiency by enabling in-house verification, so scheduled maintenance can be executed with confidence and minimal disruption to workflow. Contact Metav Werkzeuge in Emmerich am Rhein for tailored procurement and technical advice on KERN temperature calibration sets and accessories Technical data Article number: DLB-A01N Manufacturer: KERN Model code: DLB Core data Weight: 0.1 kg ECLASS: 32120392 ETIM: EC002744 HS code: 90160090 Special features Includes measuring probe with evaluation device Compatible with DLB.160-3A Category: Accessories for scales Origin: IT FAQ What is included with the temperature calibration set? The KERN temperature calibration set (SKU DLB-A01N) includes a measuring probe and an evaluation device for direct reading of temperature values. Which devices is the calibration set compatible with? The kit is designed for use with DLB.160-3A models and other compatible scale sensor systems that accept the probe interface. How portable is the kit for workshop use? With a total weight of 0.1 kg, the calibration set is compact and easy to transport between workstations for routine checks. Can the evaluation device be used independently of the probe? The evaluation device is supplied to work with the included measuring probe; separate operation depends on the device interfaces and is not specified for standalone use. Where is the kit manufactured? The product origin is listed as IT and it is supplied by the manufacturer KERN. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
Thermodrucker 2 Zeilen/s
Hochwertiger Thermodrucker – schnell, robust, bedienerfreundlich Robuster und wartungsarmer Thermodrucker für den Einzelhandel, die Gastronomie und für Restaurantküchen Sehr kompakt und langlebig Dank der wasserdichten Schalterabdeckung eignet er sich besonders für den Einsatz unter widrigen lauten Umgebungsbedingungen Thermodruck Geschwindigkeit: 2 Zeilen/s Max 64 Zeichen/Zeile Unterstützte Papierstreifenbreite: 58 mm, 80 mm (Rolle) Betrieb über Netzadapter 230 V/50 Hz Standard EU, serienmäßig Schnittstellen: RS-232 Schnittstellenkabel nicht im Lieferumfang enthalten Abmessungen Gehäuse 140 x 199 x 146 mm · Nicht passend für Serien KERN DAB, DBS, DLB, FKT, RFE
Up to 30h Battery Operation Internal Power Pack, 10 h Charge Time - KERN
A reliable choice for uninterrupted weighing operations: combine the internal rechargeable battery with long standby performance and compact design to reduce downtime and simplify maintenance. Order directly via Metav Werkzeuge or consult our specialists for compatibility and delivery from Emmerich. KERN NDE-A02 Internal Battery Unit for Scales — up to 30 h runtime, 10 h charge The KERN NDE-A02 is an internal rechargeable battery unit designed to extend the operating time of portable and bench scales, suitable for industrial and workshop weighing applications. *Internal rechargeable battery unit *Up to 30 h runtime without backlight *10 h charging time for full capacity *Lightweight at 0.21 kg, compact design Prolonged operation to keep workflows moving The internal power pack delivers up to 30 h of operation without backlight, providing a clear operational advantage for environments where mains access is intermittent or where mobility is required. With a 10 h charge time, this rechargeable unit balances runtime and recharge convenience to reduce production interruptions. The technical design focuses on stable voltage delivery for weighing electronics, helping to maintain measurement repeatability and avoiding the measurement errors that can occur during unstable power conditions. The compact construction and lightweight profile mean minimal impact on the host instrument's footprint and transport weight. Practical compatibility and dependable performance Designed as an accessory for weighing instruments, the battery unit is intended for internal installation and integrates with devices where an internal rechargeable source is specified. Runtime and charging behaviour are dependent on the connected instrument and its power consumption, notably display backlighting and peripheral functions; the stated runtime assumes operation without backlight. The unit supports standard weighing workflows by offering a predictable power profile and simple recharge cycle, reducing the need for frequent battery swaps. The modest mass of 0.21 kg contributes to easier handling during service and replacement cycles. Trusted supply and service assurance from Metav Sourcing through Metav Werkzeuge brings logistic and quality benefits: central stock and a quality filter from Emmerich ensure reliable availability for workshops and production lines. Metav’s long-standing presence in precision tooling and metrology, plus an extensive product range, supports streamlined procurement and fewer supplier interfaces. That operational reliability, combined with a compact internal battery solution, helps maintain productivity and offers peace of mind in daily use. Contact Metav Werkzeuge for personalised advice on compatibility and delivery from Emmerich — eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 Technical data Article number: NDE SKU: NDE-A02 GTIN: 4045761085633 Manufacturer: KERN Facts Weight: 0.21 kg Charging time: 10 h Runtime: up to 30 h without backlight Country of origin: CN HS code: 85075000 Special features Internal rechargeable battery for scales Compact and lightweight design Intended for integration with weighing instruments Runtime dependent on host device and backlight usage FAQ What is the typical runtime of the battery unit? The battery unit delivers up to 30 h of operation without the display backlight; actual runtime for the KERN NDE-A02 depends on the connected device and its power consumption. How long does it take to recharge fully? Full recharge requires approximately 10 h under standard charging conditions for the rechargeable internal unit supplied with KERN weighing accessories. Is the battery suitable for portable and bench scales? Yes, the internal battery is intended for integration into portable and bench weighing instruments and supports applications where mains power is intermittent. How heavy is the battery and does it affect instrument handling? At 0.21 kg, the unit is lightweight and designed to have minimal impact on the instrument's handling and transportability. Who manufactures the battery unit and where is it produced? The battery unit is manufactured by KERN and its origin is listed as China. KERN — Origin: China — Contact: not provided
USB Barcode Scanner Handheld, USB Interface, 152x84x63mm, 0.62kg - KERN
Reliable plug-and-play USB connectivity combined with a compact handheld design and robust construction enables smooth barcode capture at weighing stations and inventory points. Benefit from straightforward integration, precise data transfer and stable handling — order the device directly via Metav Werkzeuge or consult our specialists for application advice. KERN PET-A09 USB barcode scanner — Handheld, USB plug-and-play reader The KERN PET-A09 USB barcode scanner is a handheld scanning device for fast barcode capture in weighing, inventory and workshop accessory applications. Handheld design, compact 152 x 84 x 63 mm USB connectivity for plug-and-play operation Robust construction, 0.62 kg weight for stability GTIN 4045761160910 and SKU PET-A09 for traceability Faster, more reliable data capture for scales and inventory The handheld reader delivers consistent barcode capture and direct data transfer via the USB interface, reducing manual entry and measurement errors in weighing workflows. Integrated into a scale or inventory station, the unit supports streamlined processes by providing immediate electronic input to connected systems. The compact dimensions contribute to ergonomic handling while the measured mass ensures stable placement during scans, enhancing repeatability and operational speed. Simple integration and low-maintenance operation Designed as an accessory for industrial weighing and workshop environments, the scanner offers plug-and-play convenience that keeps installation time to a minimum. The USB connection provides a direct link to POS terminals, PCs and weighing instruments without complex configuration, while the handheld format allows flexible placement. Maintenance requirements are limited due to the straightforward mechanical design, which supports uninterrupted operation in everyday production and quality-control routines. Robust design adapted to workshop routines Construction suitable for regular workshop use balances durability with portability: the device’s solid build helps withstand standard handling while remaining easy to pass between workstations. As an accessory for scales and measurement stations, the reader contributes to process reliability by ensuring that identification codes are transferred accurately to the measurement system, supporting traceability and inventory control without adding complexity. For reliable, plug-and-play barcode capture choose the KERN PET-A09 — contact Metav Werkzeuge in Emmerich for personalised advice and order support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: PET SKU: PET-A09 Manufacturer: KERN GTIN: 4045761160910 Country of origin: CN Commodity code: 90160090 Facts Dimensions: 152 x 84 x 63 mm Weight: 0.62 kg Special features Handheld version USB interface for direct data transfer Category: Accessory for scales (Waagen > Zubehör) Suitable for workshop and inventory applications FAQ Is the scanner compatible with standard weighing equipment and POS systems? The KERN PET-A09 USB barcode scanner transfers barcode data via USB and is intended for easy integration with weighing equipment and common POS or inventory systems. What are the physical dimensions and weight of the unit? Dimensions are 152 x 84 x 63 mm and the device weighs 0.62 kg, providing a compact, stable handheld solution. Does the scanner require special drivers to operate? The handheld reader is designed for plug-and-play use via USB; most standard systems accept the input without additional drivers. Which identifiers help with product tracking and ordering? The scanner is listed under SKU PET-A09 and GTIN 4045761160910, enabling clear tracking and reordering. Can the device be used directly at a scale workstation? The reader is supplied as an accessory for scale environments and is suitable for direct use at weighing and inventory stations. Manufacturer: KERN — Address not provided — Contact via Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930
USB Datainterface For Scales Data Transfer To PC/Printer, Plug‑In Interface - KERN
Take advantage of reliable, automated weighing-data transfer and clear compatibility with standard platform sizes to speed up documentation and reduce manual errors; order the KERN interface directly via Metav Werkzeuge or contact our consultants for technical matching and delivery guidance. CKE-A02 USB Data Interface by KERN — USB transfer for scales and printers The CKE-A02 USB data interface provides direct transfer of weighing results to a PC, printer or other data receivers and is designed for integration into routine industrial weighing tasks. USB interface for automatic weighing data transfer Compatible with 340 x 240 mm weighing platforms Plug-and-play connection for fast integration Suitable for PC and printer data logging Streamline documentation with automatic digital export The CKE-A02 enables dependable, electronic export of weighing data, removing the need for manual transcription and lowering the risk of human error. A stable USB connection ensures consistent delivery of measured values to accounting or quality‑assurance systems, which shortens reporting cycles and supports traceable records. For workshops and production lines that rely on timely data, this interface turns intermittent manual tasks into continuous, auditable workflows while maintaining the original measurement integrity. Faster workflows and fewer interruptions for precise production By converting weight readings directly into digital form, the interface promotes operational efficiency and supports faster decision‑making. The automated transfer reduces paperwork and avoids repeated handling of measurement results, which helps to prevent delays on the shop floor and at inspection stations. Integration of the KERN interface can therefore contribute to improved throughput and fewer stoppages caused by documentation bottlenecks, delivering a measurable productivity advantage in routine metrology tasks. Clear technical fit and straightforward integration Compatibility is specified for scales with a 340 x 240 mm weighing platform, so mechanical fit and signal alignment can be checked quickly before installation. The interface is intended for straightforward connection to computers and printers, supporting common data‑logging setups in workshops and laboratories. Supplied as a compact unit, it is easy to position close to the weighing device and connect via standard USB cabling, enabling rapid commissioning without complex configuration. Contact Metav Werkzeuge in Emmerich for product matching, availability and expert advice on integrating the KERN USB data interface CKE-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Article number: CKE-A02 Manufacturer: KERN GTIN: 4045761245228 Category: Waagen > Zubehör Facts eClass: 19050112 Weight: 0 kg HS code: 90119000 Country of origin: CN Special features Function: Transfer of weighing data to PC, printer, etc. Compatibility: Scales with 340 x 240 mm weighing platform SKU: CKE-A02 Image asset available FAQ Which devices can receive the data from the interface? The KERN USB data interface transfers weighing results to PCs, printers and similar receivers that accept standard USB input for data logging. Is the interface compatible with existing KERN scales? Compatibility is specified for scales with a 340 x 240 mm weighing platform; the CKE-A02 is designed to match that mechanical and functional profile. Does the interface require special drivers or software? The unit is intended for straightforward USB connection; detailed driver requirements depend on the host system and its data‑capture software. Can the interface reduce documentation errors in quality control? Automated transfer of recorded weights via the KERN interface removes manual rekeying and thereby lowers the risk of transcription mistakes during inspection and reporting. What identifier should be used when ordering spare interfaces? Use the article number CKE-A02 or the GTIN 4045761245228 to ensure the correct USB data interface is supplied. KERN — Country of origin: CN — Contact details not provided
USB Interface Module Non-Upgradeable, For Scales - KERN
Take advantage of a compact, reliable USB data interface that ensures fast, error‑reduced transfer of measurement results and straightforward integration into existing workflows; benefit from KERN engineering and expert supply via Metav Werkzeuge for dependable delivery and technical guidance. KERN USB data interface KIB-A03 — plug‑and‑play connection for scales, not retrofittable A KERN USB data interface KIB-A03 designed to transfer weighing and measurement data directly to computers and data loggers, intended as an integrated accessory for KERN scales and lab devices. USB connection for KERN scales Plug-and-play serial data transfer Compact design, low weight 0.38 kg Not retrofittable — fixed integration Faster, more reliable data transfer to prevent costly input errors The interface module replaces manual transcription with direct digital capture, reducing administrative effort and the risk of transcription mistakes. With its USB connection and straightforward serial data output, the unit enables consistent data transfer from measuring instruments into spreadsheets and database systems. This rational improvement supports quality assurance processes, speeds up documentation and ensures that production and inspection records remain auditable and consistent. Seamless integration that preserves traceability and throughput Lightweight and compact, the module adds data logging capability without imposing significant installation or handling burden—the housing and cabling are sized for workshop and laboratory benches. At 0.38 kg, the module is unobtrusive yet robust, allowing secure mounting close to measurement points and quick connection to a host PC. By enabling electronic capture and timestamped records, the device strengthens traceability within production chains and simplifies batch documentation for audits. Engineered for dependable workshop use and clear product lifecycle expectations Manufactured by KERN, the unit is supplied as an accessory that must be specified at the time of equipment purchase because it is not retrofittable. This fixed‑integration approach avoids retrofit complexity and preserves calibration status and compliance of the measuring system. For businesses seeking a pragmatic balance of reliability and ease of use, the module fits well into established metrology processes and delivers measurable time savings during routine measuring tasks. Metav Werkzeuge supports selection and supply as a dedicated partner for precision equipment. For integration advice or to secure supply of the KERN USB data interface KIB-A03, contact Metav Werkzeuge in Emmerich for availability and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 — assistance also available by WhatsApp at +49 170 2837271 Technical data Article number: KIB-A03 SKU: KIB-A03 Manufacturer: KERN GTIN: 4045761207035 Origin: China Tariff number: 84239010 eClass: 19050111 Facts Net weight: 0.38 kg GTIN: 4045761207035 Tariff number: 84239010 eClass: 19050111 Special features Accessory for scales (Zubehör) Not retrofittable Intended for direct USB data output Supplied by KERN FAQ What devices is the interface compatible with? The KERN USB data interface KIB-A03 is intended as an accessory for compatible KERN weighing and measuring instruments and provides direct USB output for serial data capture. Can the interface be installed on existing scales? The module is not retrofittable; it is supplied for integration with specific KERN devices and should be specified when ordering the instrument. Which data formats does the interface support? The KERN USB data interface outputs serial measurement data suitable for capture by PC applications and data loggers; exact protocol details depend on the connected KERN instrument and its documentation. Who supplies the module and where can help be obtained? The accessory is manufactured by KERN and available via Metav Werkzeuge; Metav provides procurement and consultative support for integration into workshop workflows. KERN — Origin: China. Manufacturer contact information not provided.
USB-Enabled Alibi Memory For Weighing Results Export, KERN
Take advantage of secure, audit-ready storage and rapid USB export to streamline documentation of weighing results; the compact design and KERN quality support reliable data capture and simple archiving. Order the module via Metav Werkzeuge or consult our advisers for compatibility and delivery from Emmerich. KIB-A01 Alibi Data Logger — alibi memory with USB export for weighing results (KERN) The KIB-A01 Alibi Data Logger is a compact accessory designed to store and export recorded weighing results via a built-in USB interface, suited to industrial and laboratory weighing applications Secure storage of weighing results USB export to external storage Compact 0.1 kg module KERN quality for industrial use Reliable, audit-ready recording that supports traceability The alibi memory module provides a secure record of weighing operations, ensuring clear traceability for quality management and compliance workflows. Built to preserve entries in a tamper-evident format, the logger reduces manual documentation errors and supports a verifiable chain of measurement custody. This means fewer disputes during audits and a transparent archive of measured values, all stored locally and ready for export. Fast export and uncomplicated archiving for efficient workflows Equipped with a dedicated USB interface, the device offers straightforward export of saved weighing results to external media for rapid archiving, evaluation or integration into production documentation. The direct data transfer capability speeds up administration, cuts transcription time and helps maintain consistent records across shifts. Integrating the module into existing data-handling procedures simplifies reporting and frees technical staff for higher-value tasks. Compact, robust accessory made for scale environments Designed as an accessory for weighing systems, the module combines a small footprint with dependable operation; its 0.1 kg weight facilitates discreet installation without affecting scale setup. Manufactured by KERN, the unit follows industrial accessory standards and is identified by GTIN 4045761198722, making it straightforward to reference in procurement and inventory systems. The compact form factor supports flexible placement in workshops and laboratory benches while maintaining professional data integrity. For audit-ready weighing documentation with the KERN KIB-A01, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KIB-A01 Manufacturer: KERN GTIN: 4045761198722 Origin: CN Category: Waagen > Zubehör Numbers / Core technical data Weight: 0.1 kg Tariff number: 84238220 eCl@ss: 19150490 Special features Alibi memory for secure storage of weighing results USB interface for export to external storage Accessory for weighing systems (Zubehör) SKU: KIB-A01 FAQ What is the primary function of the KIB-A01? The KIB-A01 is an alibi memory module that securely stores recorded weighing results and enables export via its USB interface for archiving and audit purposes. How are saved weighing results exported? Saved entries are exported from the logger via the integrated USB interface to external storage devices for documentation, analysis or import into reporting systems. Is the module suitable for regulatory audits? Yes, the alibi memory provides audit-ready records that support traceability and documentation requirements for quality management and compliance checks. What are the physical characteristics of the device? The module is compact and lightweight, with a specified weight of 0.1 kg, intended as an unobtrusive accessory for scale installations. Who manufactures the alibi memory and how is it identified? The device is manufactured by KERN and identified by GTIN 4045761198722 and SKU KIB-A01 for procurement and inventory reference. KERN · Origin: China · Address and direct manufacturer contact not specified
Wall Mounting Bracket for DE-D Indicator, For Parcel Scales - KERN
Secure wall mounting for the indicator offers a compact, reliable solution that frees bench space and improves visibility. Benefit from direct compatibility with KERN DE package scales and a lightweight design of approx. 0.25 kg for effortless integration. Order the component directly via Metav Werkzeuge or consult the team for technical advice. DE-A13 Wall Mount for KERN DE-D Indicator — compatible with KERN DE, lightweight 0.25 kg The DE-A13 Wall Mount is a purpose-designed accessory for secure wall mounting of the indicator belonging to KERN DE package scales, aimed at workshops and industrial weighing stations. Compatible with KERN DE package scales Designed for wall mounting of the DE-D indicator Compact, space-saving installation Weighs approx. 0.25 kg Make more of workshop space with secure wall mounting Mounting the weighing indicator on a dedicated wall bracket converts cluttered workbenches into organised work areas and supports ergonomic viewing angles. The wall mounting option removes the need to dedicate bench area to the display, which is particularly valuable in packing bays and inspection stations where surface area is at a premium. A mounted display delivers consistent sightlines for staff, helping to reduce handling errors and speeding up process steps. The configuration supports stable positioning of the evaluation unit and contributes to repeatable workflow patterns in production and shipping environments. Fast integration with KERN DE systems for dependable operation Compatibility with KERN DE package scales ensures straightforward mechanical fit and electrical interface considerations are minimised at installation. The mount accommodates the weighing indicator, providing a fixed attachment point that keeps the display accessible without occupying valuable bench space. At an approximate weight of 0.25 kg, the accessory is lightweight enough for quick installation yet robust enough to hold the indicator securely. This straightforward integration reduces setup time and helps to maintain continuous operation in busy weighing applications, supporting higher throughput and lower downtime. Practical design that supports professional weighing workflows A reliable mounting solution enhances both stability and operational discipline on the shop floor. Fixed positioning of the evaluation unit improves readability during rapid operations and reduces the risk of accidental knocks that can affect measurement consistency. As an accessory within the scale ecosystem, the mount is intended to complement existing calibration and quality routines, providing a fixed reference point for the indicator. The result is a small but effective improvement in process reliability and ergonomics that benefits technicians, packers and quality inspectors in equal measure. For secure, space-saving mounting of KERN indicators such as the DE-A13, contact Metav Werkzeuge in Emmerich for technical advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DE SKU: DE-A13 Manufacturer: KERN GTIN: 4045761135956 Country of origin: CN Weight: 0.25 kg Facts eClass: 21160592 Tariff number: 84239010 Compatibility & features For KERN DE package scales For wall mounting of the DE-D indicator Accessory for scales — category: Zubehör / Accessories FAQ Is this mount compatible with KERN package scales? The DE-A13 wall mount is designed for compatibility with KERN DE package scales and provides a secure attachment point for the associated indicator. Which indicator does the mount support? The mount is intended for the DE-D evaluation unit (indicator) used with KERN DE package scales and secures the display for wall-mounted operation. What is the weight of the wall mount? The DE-A13 wall mount weighs approximately 0.25 kg, making it lightweight for handling and installation while providing stable support for the indicator. Is the mount suitable for workshop and industrial use? Yes, the wall mount is designed to support professional weighing workflows in workshops and industrial environments by improving stability and freeing bench space. Manufacturer: KERN, Country of origin: China
Windshield Back Panel with Integrated Ioniser for Scales, Anti-Static Windshield Insert - KERN
Take advantage of precise static control and quick retrofit installation to reduce weighing errors and downtime; the integrated ioniser neutralises electrostatic charge while the panel replaces the existing glass rear panel, maintaining enclosure integrity. Order the KERN ALJ-A03 via Metav Werkzeuge or consult our advisors for application guidance. Draft-shield rear panel (KERN ALJ-A03) with integrated ioniser for scales A Draft-shield rear panel fitted with an integrated ioniser, designed to replace the glass rear panel of a weighing draft shield and to neutralise electrostatic charges that can skew sensitive measurements. *Integrated ioniser neutralises electrostatic charge *Replaces existing glass rear panel of the draft shield *Compact, lightweight design (0.53 kg) Ensure measurement reliability by removing electrostatic interference The addition of an integrated ioniser directly addresses the common source of weighing variation caused by electrostatic charge on samples, packaging or containers. In laboratory and industrial weighing, even minute static fields can attract or repel the pan load and distort results; the retrofittable rear panel provides targeted neutralisation inside the draft shield, improving repeatability and reducing the need for repeated tare cycles. This technical improvement translates into measurable time savings and fewer rejected readings. Fast retrofit that preserves enclosure performance and workflow Designed to be mounted in place of the existing glass rear panel, the replacement panel offers a straightforward upgrade path for balances and enclosed weighing stations without altering the front enclosure or balance mounting. The lightweight 0.53 kg construction keeps handling safe while minimising the risk of imbalance or stress on the draft shield assembly. As a factory-option accessory from KERN, the component integrates with standard enclosures and helps reduce downtime compared with complete enclosure replacement. Practical applications and reduced process variability The panel is particularly effective when weighing powders, films or charged plastics where static can produce inconsistent readings. By neutralising charge inside the weighing enclosure, the solution supports tighter process control in QC checks, formulation tasks and laboratory dosing operations. Specifying this accessory helps standardise measurement conditions across multiple workstations, supporting traceable procedures and better overall quality assurance. Request the KERN ALJ-A03 through Metav Werkzeuge for improved static control in weighing enclosures — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility advice. Technical Data Article number: ALJ-A03 Manufacturer: KERN SKU: ALJ-A03 GTIN: 4045761206809 Country of origin: CN Facts Net weight: 0.53 kg Commodity code: 90160090 Special features Integrated ioniser for neutralising electrostatic charge Mounts instead of existing glass rear panel Factory option Product category: Scales accessories FAQ How does the integrated ioniser improve weighing results? The integrated ioniser in the KERN rear panel neutralises electrostatic charge within the draft shield, reducing attraction or repulsion effects that cause unstable or drifting readings. Is the panel compatible with existing draft shields? Compatibility depends on the draft shield geometry; the KERN ALJ-A03 is designed to replace the glass rear panel of standard weighing enclosures, and further compatibility details can be provided by Metav Werkzeuge. Will installation require modification of the balance? The panel is intended as a retrofit replacement for the rear glass panel and normally requires no modification to the balance itself; exact fitment should be checked against the enclosure model. Can the accessory be used in environments with sensitive samples such as powders or films? Yes, the neutralising function of the KERN rear panel helps stabilise measurements for charged powders, films and plastic components, lowering variability in such applications. KERN — Origin: CN, SKU ALJ-A03
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com