ADMT120408R-G56 WSM35G WSM35G Wendeplatten - Walter Tools

The combination of a Tiger·tec Gold coating and the WSM35G grade delivers stable cutting edges and secure chip control for demanding materials; order the insert via Metav Werkzeuge or request application advice from Metav Werkzeuge consultants for optimal integration into existing processes.

ADMT120408R-G56 WSM35G milling insert (Tiger·tec Gold) by Walter Tools — for stainless steels & superalloys

The ADMT120408R-G56 WSM35G is a Tiger·tec Gold‑coated milling insert engineered for robust performance in the machining of stainless steels and heat‑resistant superalloys, offering secure chip formation and reliable edge life.

• Tiger·tec Gold coating for thermal stability
• Optimised G56 chipformer for secure chip control
• 15° relief angle for robust cutting performance
• Parallelogram 85° shape with 0.8 mm corner radius

Consistent edge life through advanced coating technology

The combination of the Tiger·tec Gold coating and the WSM35G cemented‑carbide grade is designed to resist thermal and mechanical loads encountered when machining demanding alloys. The multi‑layer coating provides a thermal barrier and improved surface hardness, which together reduce flank wear and delay crater formation under elevated cutting temperatures. This means fewer tool changes and a more predictable tool‑life curve, contributing directly to process stability and reduced machine downtime. Where high heat generation is an issue, the coated grade supports a consistent cutting edge and helps maintain dimensional accuracy of the workpiece.

Geometry and chip control for safer machining

The insert’s G56 chipformer and parallelogram 85° geometry improve chip breaking and evacuation in interrupted and continuous milling operations. The 15° relief angle reduces rubbing at the margin while the 0.8 mm corner radius increases edge strength, producing a favourable balance between surface finish and insert durability. These geometry choices are particularly beneficial during heavier cuts or when axial depths vary, as they reduce the risk of built‑up edge and stabilise cutting forces. Clear chip control lowers the chance of recutting and helps maintain consistent machining cycles.

Tailored for stainless steels and high‑temperature alloys

This grade is assigned to the ISO groups M and S, indicating suitability for stainless steels and heat‑resistant superalloys/titanium respectively. Such materials are prone to work hardening, poor thermal conductivity and sticky chip formation; the WSM35G grade compensates by promoting stable chip formation and maintaining a sharp, wear‑resistant edge. In practice, this enables more reliable machining of components that demand tight tolerances and good surface integrity. Where geometry permits, the insert supports operations that prioritise tool life and reproducible component quality.

Practical benefits and selection guidance for production

When integrating the insert into production, the main advantages are process reliability, reduced unplanned interventions and consistent surface quality, particularly on demanding alloys. Selection should consider machine rigidity, cutting parameters and the intended cut type: the insert is suited to medium to heavy milling, where the combination of the Tiger·tec Gold coating and robust chipformer delivers measurable uptime benefits. For specification matching or to confirm optimal cutting data, technical consultation with Metav Werkzeuge is recommended to align insert choice with machining strategy and production goals.

Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger·tec Gold inserts, or arrange a material‑specific consultation via Metav Werkzeuge.

Technical data

• Article number: ADMT120408R-G56-WSM35G-WALTER
• Designation: ADMT120408R-G56 WSM35G
• Manufacturer: Walter Tools

Facts

• Size: 12
• Thickness: 04
• Relief angle: 15°
• Corner radius: 0.8 mm
• Tolerance class: M

Special features

• Coating/series: Tiger·tec Gold
• Grade: WSM35G (coated cemented carbide)
• Chipformer: G56
• Geometry: Parallelogram 85°
• Suitable for: stainless steels (M), superalloys & titanium (S)

FAQ

What materials is this insert intended for?
The ADMT120408R-G56 WSM35G insert by Walter Tools is intended for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), as indicated by the grade and series designation.

How does the Tiger·tec Gold coating help in practice?
The Tiger·tec Gold coating on the WSM35G grade improves thermal resistance and surface hardness, which extends edge life during high‑temperature cutting and reduces wear when machining challenging alloys.

What is the effect of the G56 chipformer?
The G56 chipformer is optimised for predictable chip breaking and evacuation, reducing the risk of built‑up edge and enabling safer, more stable milling cycles in both continuous and interrupted cuts.

Which operations suit this geometry best?
Parallelogram 85° geometry combined with a 15° relief angle and 0.8 mm corner radius is well suited to medium and heavy milling operations where edge strength and chip control are priorities.

Is this insert appropriate for finishing cuts on stainless steel?
Yes; the insert’s coating and edge geometry support improved surface quality while maintaining tool life, making it a viable option for finishing operations depending on machine and process parameters.

Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany

The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is part of the Sandvik group and is a leading manufacturer of precision cutting tools. Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are mentioned exclusively for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.