ADMT180712R-D56 WSP45G Wendeplatten - Walter Tools

Take advantage of a PVD-coated Tiger·tec Gold grade and a versatile P/M/S material range to improve tool life and process stability; order directly via Metav Werkzeuge or request tailored application advice from the technical team.

ADMT180712R-D56 WSP45G milling indexable insert — Tiger·tec Gold, 15° relief (Walter Tools)

An ADMT180712R-D56 WSP45G insert engineered for robust milling of steel, stainless steel and heat‑resistant alloys in demanding production environments

• Tiger·tec Gold PVD coating
• Suitable for P / M / S materials
• Parallelogram 85° geometry
• 15° relief, 1.2 mm corner radius

Higher productivity across mixed materials

The combination of the Tiger·tec Gold coating and the WSP45G grade yields a PVD-coated carbide solution tailored for milling tasks where both toughness and wear resistance matter. This grade is optimised for the characteristic heat and chip formation of steels, the toughness of stainless steels and the thermal demands of superalloys and titanium. The result is a more consistent removal rate and reduced interruptive tool changes — benefits that translate directly into improved throughput and lower unit machining costs.

Consistent surface quality with stable cutting edges

Designed to support a stable cutting edge, the insert geometry and chipcontrol features reduce build‑up and improve surface finish even under high thermal load. The D56 chipbreaker promotes reliable chip evacuation while the 15° relief prevents rubbing at the flank, maintaining dimensional fidelity over longer tool lives. These technical choices lead to fewer rework cycles and a predictable surface quality across batches.

Geometry and dimensions that enhance process security

The parallelogram 85° form gives defined approach angles and secure seat location in compatible toolholders, increasing clamping stability and reducing vibration. The 1.2 mm corner radius contributes to edge strength where interrupted cuts or heavy depths of cut are present, while the plate thickness code 07 supports the stiffness required for industrial milling applications. Tolerance class M ensures repeatable interchangeability in multi‑tool setups.

Practical application notes and selection guidance

As a versatile milling insert for general and demanding operations, this plate is suitable for roughing and semi‑finishing passes where a balance of wear resistance and toughness is required. The P / M / S designation means the insert is explicitly intended for steel, stainless steel and heat‑resistant superalloys/titanium, making it a good single‑grade choice for mixed‑material production runs. If uncertain about cutting parameters or holder compatibility, consult Metav Werkzeuge’s application engineers for parameter windows and toolholder recommendations to ensure optimal performance.

Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange reliable supply — info@metav-werkzeuge.com | +49 2822 7131930

Technical data

• Article number: ADMT180712R-D56-WSP45G-WALTER
• Designation: ADMT180712R-D56 WSP45G
• Type: milling indexable insert
• Manufacturer: Walter Tools

Core dimensions

• Plate size: 18
• Plate thickness: 07
• Relief angle: 15°
• Corner radius: 1.2 mm
• Plate form angle: parallelogram 85°

Materials & special features

• Series: Tiger·tec Gold
• Grade: WSP45G
• Grade class: PVD-coated carbide
• Material suitability: P / M / S
• Chipbreaker: D56
• Tolerance class: M
• Version: T

FAQ

Which materials can this insert machine effectively? The ADMT180712R-D56 WSP45G insert is specified for P / M / S — suitable for steel, stainless steel and heat‑resistant superalloys/titanium, reflecting the versatile character of the Tiger·tec Gold grade.

For which milling tasks is this grade best suited? WSP45G is a tough, versatile PVD grade intended primarily for milling operations that require a balance between wear resistance and edge stability, making it suitable for both roughing and semi‑finishing.

What does the parallelogram 85° shape influence in practice? The parallelogram 85° geometry provides a defined cutting approach angle and secure seating in compatible toolholders, improving clamping stability and chip flow during interrupted or heavy cuts.

How does the D56 chipbreaker contribute to machining? The D56 chipbreaker supports controlled chip formation and evacuation, which helps to maintain a stable cutting edge and consistent surface quality under varying cutting conditions.

What does tolerance class M mean for tool fitting? Tolerance class M indicates a medium tolerance level, providing reliable interchangeability and repeatable positioning within multi‑tool assemblies and standard toolholders.

Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen

Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.