150mm PWLNR 2525 PWLN for WNMG Wendeplatten, 95° Schnittwinkel, M08-IKG1/8, For WNMG 0804 Wendeplatten, Innenkühlung, Rechtsschneidend - Teknik Makina
€81.00
Product information "150mm PWLNR 2525 PWLN for WNMG Wendeplatten, 95° Schnittwinkel, M08-IKG1/8, For WNMG 0804 Wendeplatten, Innenkühlung, Rechtsschneidend - Teknik Makina"
Combine robust clamping, internal coolant and precise cutting geometry to secure stable turning performance; the right‑hand PWLN holder ensures reliable seating of WNMG 0804 inserts and straightforward integration via Metav Werkzeuge for machining continuity and procurement support.
PWLN for WNMG Indexable Inserts — PWLNR 2525 toolholder (right‑hand, internal coolant)
The PWLN for WNMG Indexable Inserts is a right‑hand turning toolholder designed for WNMG 0804 inserts, offering internal coolant and a compact 25 × 25 mm shank for consistent lathe mounting
- Right-hand toolholder for turning applications
- Fits WNMG 0804 indexable inserts
- Internal coolant for controlled lubrication
- Robust 25 × 25 mm shank, 150 mm overall length
Reliable clamping for consistent turning results
A stable clamp interface is central to repeatable turning. The toolholder, specified as PWLNR 2525, combines a 25 × 25 mm shank with a sturdy clamp screw (TH821) to secure WNMG inserts with minimal radial runout. This translates into consistent cutting forces and reduced vibration, which helps maintain tolerances over batch runs; the moderate mass (0.782 kg) delivers good inertial damping without adding excessive load on tool posts.
Optimised chip control and coolant delivery
Built‑in internal coolant channels enable targeted coolant delivery directly to the cutting zone, improving chip evacuation and thermal management. For operations requiring sustained contact with the workpiece, this feature reduces heat build‑up at the cutting edge and can extend insert life. Controlled lubrication also contributes to a cleaner surface finish and lowers the risk of built‑up edge when machining challenging materials with indexable inserts.
Precision geometry for dependable right‑hand turning
The holder’s 95° cutting angle and defined head geometry position WNMG 0804 inserts for predictable engagement in right‑hand turning. With a cutting height of 38 mm and a cutting‑head width of 32 mm, the assembly provides a balance between rigidity and accessibility at the tool tip. This geometry supports stable chip flow and predictable tool behaviour, which is particularly beneficial for repeatable facing and light to medium turning tasks.
Straightforward assembly and maintenance on the shop floor
Installation and routine upkeep are simplified by the included accessory interfaces: U‑plate TA020‑1, dowel TS‑4, lever TL4 and the matching 3‑Allen key. These parts enable rapid mounting and secure clamping of inserts without specialised jigs. The overall length of 150 mm offers a compact footprint while the standardised ISO designation aids compatibility checks when replacing holders or organising tooling inventories.
Contact Metav Werkzeuge to discuss Teknik Cutting Tools’ right‑hand PWLN toolholder with internal coolant and confirm suitability for specific turning tasks — info@metav-werkzeuge.com / +49 2822 7131930
Technical data
- Article number: AP151TM
- Manufacturer: Teknik Makina
- Designation: PWLN for WNMG Indexable Inserts (PWLNR 2525)
- SKU: AP151TM
Facts
- Shank: 25 × 25 mm
- Cutting head width: 32 mm
- Cutting height: 38 mm
- Overall length: 150 mm
- Weight: 0.782 kg
- Cutting angle: 95°
- Cutting direction: right‑hand
- Compatible inserts: WNMG 0804
Special features
- Internal coolant
- Clamp screw: TH821
- U‑plate: TA020-1
- Dowel: TS-4
- Lever: TL4
- Allen key: 3 Allen
- ISO designation: PWLNR 2525
- Drill rod: M08-IKG1/8
FAQ
What inserts are supported by this holder? The holder accepts WNMG 0804 indexable inserts; the toolholder is supplied in the PWLNR 2525 format for standard lathe tool posts.
Is the coolant internal or external? This turning holder features internal coolant, which delivers lubrication directly to the cutting zone for improved chip control and thermal management.
Which handedness does the toolholder have? The holder is configured for right‑hand cutting, matching common turning orientations for facing and external turning operations.
What are the key mounting components supplied or required? Mounting and clamping use standard parts such as the TH821 clamp screw, U‑plate TA020‑1, dowel TS‑4 and lever TL4; a 3‑Allen key is specified for assembly.
How does the holder geometry affect machining stability? The 95° cutting angle and compact head dimensions position the insert for stable engagement, promoting consistent cutting forces and repeatable surface quality.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Klemmhalter |
| Diameter-1: | mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.