WNMG 080404 T9215 Wendeplatten - Tungaloy

Take advantage of a rigid, ISO‑specified boring solution that accepts WNMG 0804 inserts and delivers consistent chip control via internal coolant; the combination of secure clamping, a 40 mm shank and a 300 mm overall length supports stable, repeatable turning operations—order directly through Metav Werkzeuge or request tailored advice from our consultants. PWLN for WNMG Indexable Inserts (A40T PWLNR) — Right‑hand boring bar, 40 mm shank A PWLN for WNMG Indexable Inserts boring bar engineered for precision internal and external turning applications, compatible with WNMG 0804 inserts and designed for coolant‑through machining Right‑hand cutting direction for standard turning 40 mm shank for high rigidity Internal coolant for improved chip evacuation Compatible with WNMG 0804 indexable inserts Greater rigidity for reliable surface quality The solid design with a 40 mm shank and a sturdy body diameter of 50 mm ensures high rigidity during cutting, reducing vibration and improving dimensional consistency. The tool geometry, including a 95° cutting angle and 60 mm cutting height, is suited to finishing and medium‑duty turning where surface finish and tolerance adherence matter. High rigidity translates directly into fewer reworks and more predictable cycle times, which benefits production planning and process stability. Controlled coolant flow for longer insert life Equipped with internal coolant, the boring bar delivers coolant directly to the cutting zone, supporting effective chip removal and thermal control. This targeted fluid delivery reduces the risk of built‑up edge and thermal softening of the insert, thereby extending insert life and maintaining a consistent surface finish. For operations that require uninterrupted throughput, the coolant‑through capability provides operational reliability and helps to minimise downtime for insert changes. Easy integration and secure clamping for fast set‑up The tool meets the A40T PWLNR ISO designation and accepts WNMG 0804 inserts, enabling compatibility with common indexable insert inventories. The bar’s clamping designation 08 and a total length of 300 mm allow straightforward mounting in standard holders and routers, reducing set‑up time. The right‑hand orientation supports conventional turning cycles. Taken together, these design choices simplify tool management and support consistent process repeatability on the shop floor. Request a tailored quotation or technical consultation via Metav Werkzeuge for Teknik Cutting Tools’ PWLN boring solution — contact info@metav-werkzeuge.com or call +49 2822 7131930 for fast, local supply and advice Technical data Article number: AP364TM ISO designation: A40T PWLNR Product name: PWLN for WNMG Indexable Inserts Numbers / Core technical data Shank diameter: 40 mm Cutting height: 60 mm Weight: 2.8 kg Cutting angle: 95° Body diameter: 50 mm Overall length: 300 mm Design / Special features Compatible inserts: WNMG 0804 Cutting direction: Right Internal coolant: Yes Clamping designation: 08 Manufacturer item name: Bohrstange PWLN für WNMG Wendeplatten FAQ Which inserts are compatible with this boring bar? The boring bar accepts WNMG 0804 indexable inserts; this compatibility ensures quick insert changes and alignment with common shop inventories. Does the tool support coolant‑through machining? Yes, the tool features internal coolant, enabling direct coolant delivery to the cutting edge for better chip control and prolonged insert life. What shank diameter and length does the bar have? The bar is supplied with a 40 mm shank and an overall length of 300 mm, offering a balance of reach and rigidity for a wide range of turning tasks. Is the cutter right‑handed or left‑handed? This tool is configured for right‑hand cutting, suitable for standard turning operations and compatible setups. What is the ISO designation and clamping reference? The bar carries the A40T PWLNR ISO designation and a clamping designation of 08, supporting secure mounting and standardised toolholder fitment. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the stable clamping and compact dimensions to keep turning operations precise and consistent; the left-hand orientation and 95° cutting angle make this toolholder suitable for a wide range of external turning tasks. Order the clamping holder directly via Metav Werkzeuge or request advice from their consultants. Clamping holder PWLN for WNMG Indexable Inserts – left-hand, 95° cutting angle (Teknik Makina) The Clamping holder PWLN for WNMG Indexable Inserts is a left-hand turning toolholder engineered for secure clamping of WNMG 0804 inserts in general turning and finishing operations across industry workshops and production shops Left-hand turning orientation Compatible with WNMG 0804 inserts 95° cutting angle for versatile machining Solid construction with 125 mm overall length Consistent clamping for repeatable turning accuracy The primary benefit of this toolholder is secure clamping, which reduces insert movement under cutting forces and supports repeatable part quality. The clamping concept used with this holder keeps the indexable insert firmly located so that tool life is optimised and rework is minimised. By combining a compact design with a reliable clamp interface, the holder helps to maintain consistent surface finish and dimensional accuracy across production batches. Broad compatibility and simple set-up that saves time Compatibility with WNMG 0804 inserts means easy integration into existing tooling stocks and straightforward reloading when indices are changed. The holder carries the PWLNL 2020 ISO designation, matching common tooling standards for groove and profile turning. For users unfamiliar with indexable systems: WNMG inserts are four-edged cutters that are indexed when an edge wears, so the holder’s compatible pocket and clamp geometry are essential to ensure correct positioning and repeatable cutting geometry. Robust dimensions and geometry for practical workshop use Designed with a 125 mm overall length and a 30 mm cutting height, the holder balances rigidity and access to workpieces in confined set-ups. The 25 mm cutting-head width and 20 mm body width support stable seating and help resist vibration during cutting. With a mass of 0.43 kg, the toolholder is substantial enough to damp chatter yet light enough for easy handling and changeover. The 95° cutting angle and left-hand orientation provide a neutral approach geometry that is suitable for a variety of external turning tasks where clearance and finish are priorities. Contact Metav Werkzeuge for tailored advice on compatibility and supply of the PWLN clamping holder—reliable delivery and stock information from Emmerich are available on request. Technical data Article number (SKU): P155TM Manufacturer: Teknik Makina Designation: PWLN for WNMG Indexable Inserts Facts Holder height: 20 mm Cutting-head width: 25 mm Holder body width: 20 mm Cutting height: 30 mm Weight: 0.43 kg Cutting angle: 95° Overall length: 125 mm Cutting direction: left Features ISO designation: PWLNL 2020 Suitable for WNMG 0804 inserts Shank designation: K08 Left-hand turning toolholder Compact, rigid construction FAQ Which inserts fit this toolholder? The clamping holder is specified for WNMG 0804 indexable inserts; the pocket and clamp geometry are matched to that insert size for correct seating and indexing. What does the 95° cutting angle mean in practice? A 95° cutting angle provides a near-neutral approach that balances clearance and strength at the cutting edge, suiting general external turning where a stable tool orientation is required. Is the holder suitable for finishing or roughing operations? The holder’s rigid construction and secure clamping make it well suited to finishing and medium-duty turning; for heavy roughing, insert grade and cutting parameters should be chosen accordingly. How is the left-hand orientation applied on the lathe? Left-hand orientation indicates the holder is arranged for turning where the cutting action proceeds in the opposite direction to a right-hand tool; the left-hand setup must match the machine and operation plan to ensure correct chip flow and tool clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 40 mm shank combined with compatibility for WNMG 0804 indexable inserts to maintain repeatable turning performance; the left‑hand 95° geometry and 300 mm overall length ensure stable chip control and tool life — order via Metav Werkzeuge or consult the specialists for integration advice. PWLN for WNMG Indexable Inserts – 40 mm shank left‑hand boring bar by Teknik Makina A PWLN for WNMG Indexable Inserts designed as a left‑hand boring bar for turning operations, compatible with WNMG 0804 inserts and optimised for stable clamping and consistent surface finish 40 mm shank diameter for stable clamping Compatible with WNMG 0804 inserts Left‑hand cutting, 95° cutting angle 300 mm overall length, robust 2.45 kg Stable clamping for repeatable turning accuracy The robust 40 mm shank and ISO designation S40T PWLNL provide high torsional stiffness and a secure toolholder fit, which reduces vibration during interrupted cuts. That stiffness translates into more consistent diameters and surface quality, making the bar suitable for serial production where repeatability matters. The combination of shank diameter and overall length gives a predictable deflection behaviour; the result is fewer reworks and improved productivity on batch turning tasks. Proven insert compatibility and machining orientation Designed to accept WNMG 0804 indexable inserts, the toolholder is set up for conventional left‑hand cutting and a 95° cutting angle, enabling reliable chip formation and predictable cutting forces. Compatibility with a common negative‑rake insert format simplifies tooling logistics and reduces inventory complexity. For workshops standardising on WNMG inserts, this holder fits directly into existing indexable‑insert toolsets and supports quick insert changes without additional adaptations. Rigidity, geometry and occupational benefits With a 300 mm overall length and a diameter of 50 mm at the head, the bar balances reach with rigidity for internal and external operations. The specified cutting height 60 mm ensures correct insert seating and clamping stability, which helps maintain cutting-edge geometry under load. The tool’s mass of 2.45 kg contributes to damping of high‑frequency vibrations, improving finish on sensitive components and extending insert life through steadier cutting conditions. For procurement or application guidance on the Teknik Makina PWLN boring bar, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P374TM Manufacturer: Teknik Makina ISO designation: S40T PWLNL Designation: PWLN for WNMG Indexable Inserts Cutting direction: left Facts Shank diameter: 40 mm Overall length: 300 mm Head diameter: 50 mm Cutting angle: 95° Cutting height: 60 mm Weight: 2.45 kg Special features Compatible inserts: WNMG 0804 Clamping holder size: 08 Files available: 62de7e4533927e49dbf3273d, 62de7edf0f56dbb4de4dbf50 FAQ What inserts fit this boring bar? The PWLN for WNMG Indexable Inserts accepts WNMG 0804 indexable inserts; the holder is prepared to seat the insert securely for left‑hand turning operations. Is this tool suitable for internal boring and external turning? The bar’s geometry and 300 mm overall length allow both internal and external applications where the required reach and rigidity match the workpiece set‑up. What is the shank diameter and why does it matter? Shank diameter is 40 mm; a larger shank increases rigidity, reduces deflection and improves surface finish and dimensional stability during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity from the S40T shank and precise insert seating deliver stable machining with predictable chip control; the 95° cutting angle and right‑hand geometry support secure engagement in typical turning operations. Order the P364TM boring bar directly via Metav Werkzeuge or consult their specialists for integration and availability advice. P364TM — Boring bar S40T PWLNR for WNMG 0804 (Right‑hand, 95°) The P364TM is a right‑hand boring bar with an S40T shank, designed for turning operations using WNMG 0804 indexable inserts and intended for stable, repeatable metal‑removal tasks Right‑hand cutting direction Fits WNMG 0804 indexable inserts 40 mm shank diameter, 300 mm overall length 95° cutting angle for secure engagement Rigidity and predictable cutting performance for production use The S40T shank and the S40T PWLNR ISO designation provide a compact, stiff holder that reduces deflection under load. With a 40 mm shank diameter and 300 mm overall length, the toolholder sustains radial forces while maintaining repeatable seating of the insert; this leads to consistent part geometry and extended insert life. Specified mass and dimensions (weight 2.45 kg, cutting height 60 mm) enable planners to account for tool‑holder dynamics when programming spindle speeds and feeds. The result is measurable process stability and fewer reworks in batch production. Compatibility and machining benefits with WNMG 0804 inserts Engineered for WNMG 0804 indexable inserts, the holder accepts an industry‑standard insert format that simplifies stocking and changeover. The 95° cutting angle and right‑hand orientation promote positive engagement and controlled chip flow on typical turning tasks; this geometry is particularly useful where a secure approach angle reduces vibration and improves surface finish. For shops standardising on negative‑geometry turning inserts, the toolholder integrates directly into existing workflows and CAM setups without adapting insert geometry. Practical advantages for workshop integration and maintenance The toolholder’s nominal 50 mm diameter at the working end and its standard ISO naming make procurement and tool management straightforward. The design minimises setup time because insert clamping and seat alignment follow established conventions for PWLN‑style holders. As a product from Teknik Cutting Tools utilised via Metav Werkzeuge’s distribution, the assembly benefits from warehouse availability in Emmerich and advised compatibility checks where specific machine interfaces or clearances are constrained. Routine inspection is limited to insert seating and clamp torque, keeping maintenance effort low while ensuring reliable production output. For technical advice and availability of the Teknik Cutting Tools P364TM boring bar, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P364TM SKU: P364TM ISO designation: S40T PWLNR Type: PWLN for WNMG indexable inserts Brand: Teknik Makina Dimensions Shank diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 60 mm Weight: 2.45 kg Compatibility & Features Suitable for: WNMG 0804 inserts Cutting direction: Right‑hand Cutting angle: 95° ECLASS: 21180806 Files: 62de7e450f56dbb4de4dbefd, 62de7edf33927e49dbf32787 FAQ Which insert type fits this toolholder? The P364TM accepts WNMG 0804 indexable inserts; the holder is specified for PWLN‑style clamping compatible with that insert size. Is the cutting direction right‑hand or left‑hand? This toolholder is built with a right‑hand cutting direction and the ISO code indicates a right‑hand configuration. What are the key dimensions to check before fitting? Confirm the 40 mm shank diameter, 300 mm overall length and the 50 mm working diameter against turret clearance and toolpost capacity. What is the benefit of the 95° cutting angle? A 95° cutting angle provides secure engagement and stable contact at the cutting edge, improving surface finish and reducing chatter in many turning applications. Who manufactures and supplies the tool? The tool is produced by Teknik Cutting Tools and supplied through Metav Werkzeuge; for ordering and technical integration details consult Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable clamping for left-hand turning with WNMG 0804 inserts and a rigid 95° cutting angle; the robust 170 mm tool body and 32 mm clamp height ensure stable machining and consistent surface quality. Order the holder directly via Metav Werkzeuge or consult our specialists for additional guidance. Klemmhalter PWLN for WNMG Indexable Inserts — Left-hand, 95° Cutting Angle (Teknik Makina) A Klemmhalter engineered to hold WNMG 0804 indexable inserts securely for left-hand turning applications, designed for stable cuts and consistent repeatability in workshop and production environments Left-hand cutting direction compatibility For WNMG 0804 indexable inserts 95° cutting angle for versatile turning Robust 170 mm body with 32 mm clamp height Secure clamping for dependable left-hand turning The clamping system is configured to accept WNMG 0804 indexable inserts and to apply a firm hold via the ISO designation PWLNL 3232, ensuring reliable seating of the insert during machining. The left-hand orientation and the 95° cutting angle provide a defined cutting geometry that supports predictable chip flow and tool engagement. For users with limited technical background: a consistent cutting angle and secure clamping reduce chatter and uneven wear, so component tolerances are easier to maintain and rework is less frequent. Stable geometry that improves surface quality and tool life With an overall length of 170 mm, a cutting-head width of 40 mm and a body width of 32 mm, the toolholder delivers mass and geometry that contribute to vibration damping and cutting stability. The clamp height of 32 mm combined with a 38 mm cutting height produces a rigid setup that helps preserve insert life and maintain surface finish. The listed weight (1.421 kg) reflects a substantial construction that assists in reducing deflection under load; this translates into fewer interruptions for adjustments and higher first-pass yield in production. Designed for integration into workshop and production workflows The holder is specified with a shank designation P08 for secure mounting and is optimised for left-hand turning cycles commonly found in serial manufacturing and machine-shop use. Specifying this toolholder supports predictable process planning: repeatable changeover characteristics and a familiar ISO designation simplify tool lists and spare-part management. Maintenance cycles can be scheduled around verified tool stability rather than frequent troubleshooting, supporting efficient machining operations and controlled throughput. For support selecting the correct holder for left-hand turning with WNMG inserts, contact Metav Werkzeuge — Technik Makina’s PWLN clamping holder (SKU P157TM) can be ordered or discussed with our consultants via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: P157TM Manufacturer: Teknik Makina Article name: PWLN for WNMG Indexable Inserts ISO designation: PWLNL 3232 Facts Clamp height: 32 mm Cutting head width: 40 mm Body width: 32 mm Cutting height: 38 mm Cutting angle: 95° Overall length: 170 mm Weight: 1.421 kg Special features For WNMG 0804 indexable inserts Left-hand cutting direction Shank designation: P08 FAQ What insert type does this holder accept? The holder is specified for WNMG 0804 indexable inserts and is built to the ISO designation PWLNL 3232 for proper seating and clamping. Is the clamping holder suitable for left-hand turning only? Yes, the toolholder is designed for left-hand cutting direction and provides the correct geometry for corresponding turning operations. What are the key dimensions to check for machine compatibility? Relevant dimensions include an overall length of 170 mm, clamp height 32 mm, cutting-head width 40 mm and cutting height 38 mm; these determine fit and clearance in the turret or toolpost. Which shank designation is used for mounting? The holder uses the P08 shank designation for mounting and interface alignment. How does the 95° cutting angle affect application choice? The 95° cutting angle provides a sturdy cutting geometry that is well suited to general turning operations where a robust profile and predictable chip evacuation are priorities. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust right-hand clamp holder with ISO PWLNR 2525 compatibility and a precise 95° cutting angle to improve turning stability and repeatability on worn or new tool posts; benefit from a standardised 150 mm overall length that eases machine setup. Order the clamp holder directly via Metav Werkzeuge or ask our consultants if needed. Clamp holder PWLN for WNMG indexable inserts — right-hand turning toolholder (PWLNR 2525) The Clamp holder PWLN for WNMG indexable inserts is a right-hand turning toolholder designed for secure clamping of WNMG 0804 inserts in CNC and manual lathe operations, offering standard ISO fitting and a compact 150 mm overall length. *Right-hand turning toolholder PWLN form *Compatible with WNMG 0804 indexable inserts *ISO designation PWLNR 2525 for standardised fitting *150 mm overall length and 95° cutting angle Precise clamping for stable turning performance The clamp holder delivers consistent tool positioning through a dedicated clamping geometry that suits WNMG 0804 inserts and an M08 clamping screw interface. The specified clamping height and cutting height coordination ensures repeatable centreline position, reducing setup variation and enhancing process reliability. This solid interface is especially useful where insert repeatability is critical for batch consistency and tool-change routines. Standardised form factor for faster machine integration Built to the PWLN form and bearing the ISO PWLNR 2525 designation, the toolholder fits common turret and toolpost arrangements with minimal adaptation. The 150 mm overall length and compact head dimensions (head width 32 mm, holder width 25 mm) support close radius work and reduce interference on multi-holder setups. Standardisation simplifies inventory and replacement strategies across production lines. Balanced mass and geometry to reduce vibration With a mass of 0.773 kg, the holder provides sufficient inertia to assist in damping vibration in interrupted cut scenarios without adding excessive load to the turret. The 95° cutting angle gives a favourable clearance and approach for general turning tasks, improving chip flow and surface finish. Such mechanical consistency contributes directly to longer insert life and fewer rework cycles. Practical applications and workshop advantages Engineered for everyday turning and profiling tasks, the holder suits workshops that require straightforward interchangeability with WNMG inserts and consistent performance. The right-hand orientation and the product’s compact footprint make it appropriate for both finish and light roughing operations on medium-duty lathes. For production environments seeking reduced tool-change complexity, the standard form and ISO conformity support streamlined work processes and predictable tool behaviour. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Cutting Tools clamp holder into existing tool setups and for ordering information; Metav Werkzeuge can provide fast guidance from Emmerich and support supply to the workshop. Technical Data Article number: P151TM Manufacturer: Teknik Makina Designation (EN): PWLN for WNMG Indexable Inserts ISO designation: PWLNR 2525 Facts Overall length: 150 mm Cutting height: 38 mm Holder height: 25 mm Cutting head width: 32 mm Holder width: 25 mm Weight: 0.773 kg Cutting angle: 95° Compatible insert type: WNMG 0804 Cutting direction: right Special features M08 clamping screw interface Right-hand toolholder configuration Standardised PWLN form for modular setups Compact head suitable for close-radius operations FAQ What inserts fit this clamp holder? The clamp holder accepts WNMG 0804 indexable inserts; the holder’s geometry and clamping interface are matched to this insert size for secure seating and repeatable positioning. Is this toolholder right- or left-hand? This turning holder is configured for right-hand cutting, as specified in the technical data for P151TM. What is the ISO designation of the holder? The toolholder carries the ISO designation PWLNR 2525, enabling straightforward replacement within standardised tool systems. How does the 95° cutting angle affect machining? A 95° cutting angle provides a favourable approach and clearance for general turning, improving chip evacuation and contributing to a consistent surface finish. Can Metav Werkzeuge supply installation guidance? Metav Werkzeuge can advise on mounting and integration; contact details are provided below and assistance is available from the Emmerich location. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and a 95° cutting angle for stable, chatter‑free turning, combined with internal coolant to extend insert life; order the tool directly via Metav Werkzeuge or request technical advice for an optimised setup. AP372TM Boring bar — PWLN for WNMG indexable inserts, left‑hand, internal coolant (Teknik Makina) AP372TM Boring bar for CNC turning applications, designed to accept WNMG 0804 indexable inserts for reliable finishing and semi‑roughing on conventional and CNC lathes Left‑hand cutting for reverse turning operations Internal coolant for improved chip evacuation Holds WNMG 0804 indexable inserts securely Performance and application: reliable turning with defined insert geometry The AP372TM is a purpose‑built boring bar intended for machining tasks that demand repeatable results with indexable tooling. Built around the PWLN for WNMG concept, this bar accepts the common WNMG 0804 insert format, enabling fast insert changes and predictable cutting behaviour. Left‑hand orientation suits reverse or left‑hand cutting operations, while the tool form is optimised for turning and facing on lathes and turning centres. The combination of a standard insert format and a familiar holder geometry simplifies tooling management across workshops and production lines. Rigidity and reach: why shaft and angle matter for process stability A solid 32 mm shank and a substantial 60 mm cutting height give the bar notable stiffness for its class; the 95° cutting angle increases edge engagement without sacrificing stability. These dimensions reduce deflection under cutting forces, which results in improved surface finish and reduced rework. With an overall length of 300 mm and a compact weight of 1.764 kg, the tool balances reach and mass to limit vibrations—an essential factor when machining longer workpieces or when extending beyond the chuck. Cooling and chip control: practical benefits of through‑tool coolant Integrated internal coolant supplies cutting fluid directly to the insert rake zone, improving temperature control at the cutting edge and aiding chip evacuation. This targeted cooling reduces thermal wear and helps preserve insert geometry, extending service life and lowering tooling costs over time. Using indexable inserts with correct grades for the workpiece material, the bar enables efficient chip flow and repeatable cycle times, particularly on materials where heat dissipation is critical. Compatibility and workshop handling: straightforward integration The tool carries the ISO designation A32T PWLNL and is matched to WNMG 0804 inserts, a widely available negative‑geometry type that offers a good balance between toughness and cutting performance. The clamping reference "08" aligns the holder with common clamping systems for seamless replacement. As a left‑hand, coolant‑fed boring bar, it fits standard turning holders and quick‑change systems, reducing setup time and simplifying tool inventory for production or repair shops. For precise left‑hand turning with improved insert life and dependable chip control, contact Metav Werkzeuge for tailored advice on integrating the AP372TM boring bar into the production process — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: AP372TM Manufacturer: Teknik Makina Designation: PWLN for WNMG indexable inserts ISO designation: A32T PWLNL Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 40 mm Cutting angle: 95° Weight: 1.764 kg Special features Internal coolant: yes Compatible inserts: WNMG 0804 Cutting direction: left Clamping reference: 08 FAQ What insert type does this boring bar use? The AP372TM boring bar is designed for WNMG 0804 indexable inserts, providing easy interchangeability and predictable cutting behaviour. Is the tool suitable for left‑hand turning only? Yes, the holder is configured for left‑hand cutting, making it suitable for reverse turning operations and applications that require left‑hand tool orientation. How does the internal coolant benefit machining? Internal coolant supplied through the bar delivers fluid to the cutting zone, improving temperature control at the edge, aiding chip evacuation and extending insert life when using the AP372TM boring bar. What does the ISO designation A32T PWLNL indicate? The A32T PWLNL marking denotes the holder type and interface geometry, which helps ensure compatibility with standard tool posts and clamping systems used in turning centres. Will the 32 mm shank reduce vibration compared with smaller bars? A 32 mm shank increases stiffness compared with smaller diameters, improving resistance to deflection and reducing chatter in many turning scenarios when the AP372TM is used with suitable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust clamping solution that combines secure insert retention, compact workshop dimensions and a precise 95° cutting angle for stable turning results; order the PWLN clamping holder directly via Metav Werkzeuge or ask our consultants if needed. PWLN for WNMG Indexable Inserts – Clamping holder (PWLNR 2020), right-hand The PWLN for WNMG Indexable Inserts is a right-hand clamping holder engineered for reliable retention of WNMG 0804 inserts in turning applications. Right-hand holder for WNMG 0804 inserts 95° cutting angle for stable engagement 20 mm holder height, 25 mm head width 125 mm overall length for extended reach Precision and process reliability for turning This clamping toolholder delivers a combination of secure clamping and consistent cutting geometry that supports reliable chip formation and surface finish. The defined 95° cutting angle reduces lateral forces during engagement, which helps to maintain tool life and steady cutting conditions. The design emphasises repeatability: the seat and flank geometry ensure indexable inserts remain positively located during interrupted cuts, so machining cycles can run with fewer interruptions and predictable outcomes. Compact dimensions for simple integration With a 20 mm holder height, 25 mm head width and an overall length of 125 mm, the toolholder is dimensioned to fit most standard toolposts while offering sufficient reach for medium-reach turning tasks. The modest 0.43 kg mass lowers static overhang weight, which can assist in reducing imbalance and vibration on smaller lathes. These practical dimensions make the component straightforward to handle in a busy workshop and facilitate quicker setup and changeover, supporting higher uptime and smoother production flow. Compatibility, designation and mounting clarity The toolholder carries the ISO designation PWLNR 2020 and is specified for use with WNMG 0804 indexable inserts in right-hand orientation. The configuration is suitable where a firm clamping interface and consistent rake orientation are required for general turning operations. For procurement and logistics, the item is listed under SKU P150TM and is supplied by Teknik Makina; Metav Werkzeuge can advise on workshop fitment and offer the necessary ordering support to integrate the holder into existing tooling systems. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the PWLN clamping holder (SKU P150TM) and its suitability for precise turning operations in the workshop Technical data Article number: P150TM Manufacturer: Teknik Makina ISO designation: PWLNR 2020 Compatible inserts: WNMG 0804 Facts Holder height: 20 mm Head width (cutting head): 25 mm Holder width: 20 mm Cutting height: 30 mm Overall length: 125 mm Cutting angle: 95° Weight: 0.43 kg Special features Right-hand cutting direction Designed for WNMG 0804 indexable inserts PWLN series clamping concept Suitable for standard turning toolposts FAQ Which inserts are compatible with this clamping holder? The PWLN for WNMG Indexable Inserts (SKU P150TM) is designed specifically for WNMG 0804 indexable inserts and secures them in the PWLNR 2020 seat. Is this holder intended for right-hand turning only? Yes, the holder is specified for a right-hand cutting direction, providing correct rake and clearance for right-hand turning operations. What are the most important dimensions to check for machine fitment? Key dimensions are 20 mm holder height, 25 mm head width, 30 mm cutting height and 125 mm overall length; these determine clearance and reach when mounted on a toolpost. What advantage does the 95° cutting angle offer? A 95° cutting angle delivers a stable cutting engagement and predictable force direction, which helps to reduce lateral deflection and supports consistent surface quality. How is the item identified for ordering and reference? Reference the SKU P150TM or the ISO designation PWLNR 2020 when ordering or enquiring about the product. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: AP362TM Item: Boring Bar usable with WNMG 0804 Indexable Inserts Brand: Teknik Makina ISO Code: A32T PWLNR 08 Structural Details: Diameter: 40mm Weight: 1.764kg Total length: 300mm Cutting Height: 60mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a rigid clamping design and optimised geometry for reproducible turning results; the right‑hand tool holder offers a stable reach and secure seat for WNMG 0804 inserts — order or request advice from Metav Werkzeuge for seamless integration into production. PWLN for WNMG Indexable Inserts — PWLNR 3232 turning tool holder (right‑hand, 170 mm) by Teknik Makina The PWLN for WNMG Indexable Inserts is a right‑hand turning tool holder engineered for secure clamping of WNMG 0804 inserts in CNC lathes and turning centres *Turning tool holder for WNMG 0804 inserts *Right‑hand version with 95° cutting angle *Overall length 170 mm for stable reach *Robust 32 mm body, 40 mm head width Consistent clamping that improves dimensional accuracy The turning holder delivers secure clamping through a machined seat and ISO‑defined geometry, reducing insert movement under load. By accepting WNMG 0804 indexable inserts and complying with the PWLNR 3232 ISO form, the component promotes repeatable tool positioning and predictable cutting behaviour. The specified 95° cutting angle helps to control radial cutting forces in common turning operations, which translates into fewer workpiece rejects and reduced downstream rework. This focus on geometric stability supports tighter tolerances without additional machine modifications. Geometry and mass tuned for vibration control and productivity An overall length 170 mm combined with a compact head and body proportions gives a favourable stiffness‑to‑reach ratio. The holder’s cutting height 38 mm and 32 mm body contribute to a low overhang and improved rigidity, while the 40 mm head width stabilises the insert under intermittent cuts. At approximately 1.421 kg, the mass helps dampen chatter on medium‑duty turning cycles, supporting higher feed rates and improved surface finish. These engineered dimensions enable efficiency gains on batch work, allowing faster cycle times without sacrificing component integrity. Compatibility and workshop integration for smooth setup Designed for common workshop standards, the tool holder fits WNMG 0804 grade inserts and references the clamping bar designation P08, simplifying part selection in tool inventories. The right‑hand orientation matches typical lathe setups where conventional forward turning is required, avoiding unnecessary holder swaps. For straightforward integration, the holder’s ISO designation and dimensional data allow quick verification against machine tool envelopes and turret pockets. Technical assistance for fixture selection and process adaptation is available through Metav Werkzeuge to ensure the holder performs optimally within the production cell. For Teknik Makina quality and dependable turning performance, contact Metav Werkzeuge in Emmerich for tailored advice and order processing: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P152TM Manufacturer: Teknik Makina Article designation: PWLN for WNMG Indexable Inserts ISO designation: PWLNR 3232 Facts Overall length: 170 mm Cutting height: 38 mm Holder height: 32 mm Holder width: 32 mm Cutting head width: 40 mm Weight: 1.421 kg Cutting angle: 95° Special features Compatible with WNMG 0804 inserts Right‑hand orientation Clamping bar designation: P08 Tool category: turning tool holder for indexable inserts FAQ What insert size does the holder accept? The holder is specified for WNMG 0804 indexable inserts, ensuring a standard insert seat and reliable clamping. Is the orientation suitable for conventional turning on lathes? Yes, the component is a right‑hand turning tool holder designed for conventional lathe turning directions. What is the ISO designation for this tool holder? The ISO designation is PWLNR 3232, which aids compatibility checks with turrets and tool lists. How does the geometry affect machining stability? The combination of 170 mm overall length, controlled head width and body height reduces overhang and enhances rigidity, improving surface finish and reducing vibration. Which clamping bar or shank reference is compatible? The holder references the clamping bar designation P08, simplifying replacement and spares management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 40 mm shaft rigidity, internal coolant and compatibility with WNMG 0804 inserts for stable, reproducible turning operations; order the tool via Metav Werkzeuge or consult the specialists for application advice. A40T PWLNL Boring Bar — 40 mm shaft, internal coolant (Teknik Makina) A40T PWLNL Boring Bar for left‑hand turning, designed to accept PWLN holders for WNMG 0804 indexable inserts and to deliver stable chip control across medium and long overhangs. 40 mm shaft diameter for stable clamping Internal coolant for improved chip evacuation Compatible with WNMG 0804 indexable inserts 300 mm overall length for extended reach Increased process stability through a rigid build The A40T PWLNL is engineered for demanding turning tasks where vibration and chatter reduce surface quality and tool life. A 40 mm shaft provides a solid interface to the turret or toolpost, improving stability under radial cutting forces and enabling consistent tool engagement. The substantial mass and form reduce deflection during both roughing and finishing passes, which translates into fewer re‑works, improved tolerances and longer insert life. This focus on mechanical stiffness supports predictable cycle times and repeatable part quality. Better cooling and chip management for uninterrupted production An integrated internal coolant channel delivers coolant directly to the cutting edge, enhancing heat dissipation and aiding chip evacuation from the cut. Combined with the 95° cutting angle and the geometry suited to WNMG 0804 inserts, this arrangement reduces built‑up edge and thermal wear, allowing higher sustained cutting parameters on a range of ferrous and non‑ferrous components. Reliable coolant supply also helps achieve a better surface finish and reduces the likelihood of insert edge damage during longer turnings. Smooth integration with existing toolsets and quick setup The bar follows ISO‑style designation A40T PWLNL, making it straightforward to identify and match with existing indexable insert families and PWLN holders. With a 60 mm cutting height and an overall length of 300 mm, the tool balances reach and rigidity for through‑tool applications. At 2.8 kg, it is sufficiently robust for secure clamping while still manageable during tool changes. Compatibility with standard WNMG 0804 inserts streamlines tool inventory and minimises setup iterations, supporting faster changeovers and reduced machine downtime. For robust left‑hand turning with internal coolant, contact Metav Werkzeuge for tailored technical advice and reliable dispatch from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: AP374TM Manufacturer: Teknik Makina ISO designation: A40T PWLNL For inserts: WNMG 0804 Facts Shaft diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 60 mm Weight: 2.8 kg Cutting angle: 95° Cutting direction: left Special features Internal coolant Compatible with PWLN holders for WNMG inserts Left‑hand orientation ISO‑style clamping FAQ Is this boring bar compatible with standard WNMG 0804 inserts? Yes. The bar is configured for PWLN holders and is compatible with WNMG 0804 indexable inserts, allowing the use of widely available turning grades and geometries. Can the tool be used for through‑tool coolant applications? The bar includes internal coolant and is intended to supply coolant near the cutting zone to improve chip control and thermal management. Which machines are suitable for this bar? Stable turrets and toolposts that accept a 40 mm shaft and provide secure clamping are suitable; the design targets conventional CNC lathes and turning centres requiring left‑hand cutting tools. Does the left‑hand orientation affect insert selection? Insert geometry remains the same, but holders and seatings must match a left‑hand toolholder configuration; the product is supplied for left‑hand cutting as specified by the ISO designation. What are the key dimensions to check before ordering? Refer to shaft diameter 40 mm, overall length 300 mm, cutting height 60 mm, and nominal bar diameter 50 mm to ensure compatibility with the machine and holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from proven clamping stability and precise left‑hand performance with the PWLNL 2525; the 95° cutting angle and compatibility with WNMG 0804 inserts support consistent turning results. Order directly via Metav Werkzeuge or consult the specialist team for application advice. P156TM PWLNL 2525 Toolholder — PWLN for WNMG indexable inserts, left‑hand (Teknik Makina) The P156TM PWLNL 2525 toolholder is a left‑hand external turning holder designed for WNMG 0804 indexable inserts, delivering stable clamping and predictable chip control in general turning tasks. Left‑hand turning orientation Compatible with WNMG 0804 inserts 95° cutting angle for stable engagement Robust 150 mm overall length Precise clamping for consistent turning accuracy The holder is engineered for clamping stability, ensuring the insert is held securely during interrupted cuts and higher feed rates. Its ISO designation, PWLNL 2525, indicates a standardised shank and clamping geometry that supports repeatable set‑ups. The unit accepts WNMG 0804 indexable inserts, a common geometry that combines a generous cutting edge with easy indexing; this reduces set‑up time and simplifies inventory management. The left‑hand orientation means the cutting forces act predictably for counter‑clockwise external turning operations, which is important when configuring multi‑station workholding. Designed to improve workshop throughput and surface quality With a 95° cutting angle and an overall length of 150 mm, the toolholder balances accessibility and stiffness to limit vibration and chatter. The holder’s dimensions — 25 mm height and 25 mm width with a 32 mm cutting‑head width and 38 mm cutting height — contribute to a rigid tool assembly; higher rigidity translates into improved surface finish and extended insert life. The mass of approximately 0.773 kg also helps to dampen resonance during medium‑duty cuts. These tangible attributes make the holder suitable for production environments where repeatability and reduced rework are priorities. Robust design to reduce downtime and maintenance A straightforward clamping concept and standard insert format simplify maintenance and replacement procedures, which supports fast turnaround in busy workshops. The robust construction was conceived to withstand frequent indexings and routine handling; as a result, tool change intervals can be scheduled rather than improvised, supporting predictable machine utilisation. Where tool life and machine uptime matter, the combination of a standard ISO profile and a widely available insert type reduces the risk of supply bottlenecks and keeps the production flow steady. For application guidance, to confirm suitability for specific workpieces, or to arrange procurement through our European distribution, contact Metav Werkzeuge in Emmerich for expert assistance and swift processing. Technical data Article number: P156TM Manufacturer: Teknik Makina ISO designation: PWLNL 2525 Type: PWLN for WNMG indexable inserts Cutting direction: left Facts Holder height: 25 mm Holder width: 25 mm Cutting‑head width: 32 mm Cutting height: 38 mm Cutting angle: 95° Overall length: 150 mm Weight: 0.773 kg Special features Compatible inserts: WNMG 0804 Left‑hand turning holder Brand SKU: P156TM Standardised ISO shank designation Suitable for general turning and semi‑finishing FAQ Which inserts fit this holder? The holder accepts WNMG 0804 indexable inserts; the P156TM is optimised for that insert format to provide reliable cutting edge support. Is the toolholder left‑hand or right‑hand? This PWLN toolholder is supplied in a left‑hand configuration, designed for external turning where the tool approaches the workpiece from the right. What does the ISO designation PWLNL 2525 mean? The ISO code PWLNL 2525 identifies the shank profile and clamping geometry used on this toolholder; it facilitates compatibility with standardised toolpost mounts and simplifies tool exchanges. For which machining tasks is this holder recommended? The P156TM is suited to medium‑duty turning and semi‑finishing operations where a 95° cutting angle and stable clamping help achieve consistent surface quality and repeatable dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the robust S32T PWLNR design combined with compatibility for WNMG 0804 indexable inserts to secure stable turning and predictable tool life. Take advantage of the 32 mm shank and 300 mm overall length for deeper machining with reduced vibration — order via Metav Werkzeuge or consult the team for tailored application advice. Boring bar PWLN for WNMG indexable inserts (S32T PWLNR, 32 mm shank) by Teknik Makina The PWLN for WNMG indexable inserts is a right-hand boring bar engineered for secure turning with WNMG 0804 inserts in industrial and workshop turning applications S32T PWLNR design for stable clamping Compatible with WNMG 0804 indexable inserts 32 mm shank diameter for secure mounting 300 mm overall length for deep operations Stable clamping for consistent turning performance The S32T configuration delivers a compact, rigid toolholder geometry that promotes secure clamping and reduced chatter in interrupted cuts. With a 32 mm shank and the specified ISO designation, the holder provides standardised mounting that simplifies fixture selection and repeatability across setups. Using indexable inserts means only the cutting edge requires replacement, lowering downtime and enabling consistent component tolerances. Reach deeper with a balanced, vibration‑resistant design A 300 mm overall length combined with a 40 mm head diameter gives reach for deeper bores while maintaining a controlled mass distribution. The 95° cutting angle and a 60 mm cutting height support efficient chip control and stable engagement in right‑hand cuts. These dimensions make the tool suitable where extended reach is necessary without sacrificing surface finish or dimensional stability in the machined part. Simplified tool integration and predictable productivity Marked as S32T PWLNR, the bar fits common toolholders and complements workflows that rely on WNMG 0804 inserts. The standardised insert interface reduces setup complexity and enables quick insert changes to adapt to different materials and cutting conditions. The tool’s measured weight (approx. 1.764 kg) and nominal geometry aid in balancing considerations for spindle and turret operations, supporting steady cycle times. Practical guidance for selecting inserts and applications This boring bar accepts WNMG 0804 indexable inserts; the choice of insert grade and geometry determines cutting performance for specific materials and feeds. The right‑hand cutting direction aligns with standard lathe configurations. As the bar is a modular component, selecting an appropriate insert coating, grade and chipbreaker will tailor the combination to priorities such as tool life, surface finish or productivity without altering the holder. For secure, repeatable turning with a robust 32 mm shank and standard WNMG 0804 compatibility, contact Metav Werkzeuge for application guidance or to arrange procurement through Metav Werkzeuge GmbH in Emmerich Technical data SKU: P362TM Manufacturer: Teknik Makina Article designation: Boring bar PWLN for WNMG indexable inserts ISO designation: S32T PWLNR Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Head diameter: 40 mm Cutting angle: 95° Weight: 1.764 kg Cutting direction: right Special features Compatible with WNMG 0804 indexable inserts Right‑hand boring bar Clamping size: 08 FAQ What insert type does this boring bar accept? The boring bar accepts WNMG 0804 indexable inserts; the insert determines the cutting performance and material suitability. Is the bar suitable for deep bore operations? Yes. The 300 mm overall length and balanced geometry make the bar suitable for deeper turning operations while maintaining stability. What is the shank diameter and why does it matter? The shank diameter is 32 mm; a larger shank diameter improves clamping rigidity and reduces deflection during cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity and reliable chip control: the left-hand PWLN clamping holder accepts WNMG 0804 inserts and features internal coolant, ensuring longer insert life and consistent turning results. Order the holder directly via Metav Werkzeuge or request advice from the consultants if clarification is needed. PWLN for WNMG Indexable Inserts (PWLNL 2525) — left-hand clamping holder with internal coolant by Teknik Makina The PWLN for WNMG Indexable Inserts is a left-hand turning toolholder engineered for secure clamping of WNMG 0804 inserts, offering internal coolant and a 25 x 25 mm shank for stable finishing and roughing operations. Left-hand toolholder for turning operations Internal coolant for optimised chip evacuation Shank 25 x 25 mm, cutting height 38 mm Accepts WNMG 0804 indexable inserts Improved stiffness for repeatable turning results A square shank of 25 x 25 mm combined with a well-balanced overall length of 150 mm delivers the rigidity required for repeatable turning and stable finish quality. The ISO designation PWLNL 2525 signals a standardised mounting form that reduces setup time on production lathes. With a measured mass of 0.782 kg, the carrier maintains tool stability without excessive overhang, which helps to lower vibration and improve dimensional consistency in batch production. Cooler cutting edge, longer insert life Built-in internal coolant directs lubricant to the cutting edge, reducing temperature peaks and improving chip breaking when machining common external diameters. Matched to the 95° cutting angle and optimised for WNMG 0804 inserts, this configuration supports extended insert life and predictable tool wear. The result is fewer indexings, lower tooling cost per component and higher uptime — a clear efficiency advantage for series production and workshop jobs alike. Secure clamping and straightforward maintenance Clamping integrity is provided by the TH821 clamping screw together with the TA020-1 U‑plate and locating dowel TS-4, ensuring repeatable seat alignment and positive axial retention. The supplied knee lever TL4 and a 3 Allen key interface simplify service procedures and insert changes, reducing downtime. These service-oriented fittings are intended to let maintenance staff complete insert swaps rapidly while maintaining consistent cutting geometry. Compatibility and shop-floor reliability As a left-hand turning holder, the carrier suits conventional toolpost arrangements where the schnittrichtung (cutting direction) is left; this straightforward orientation avoids ambiguity during set-up. Manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge’s European quality filter, the assembly benefits from an established supply chain and documentation that supports industrial use. The combination of standardised interfaces and robust coolant routing makes this an economical choice for both small workshops and automated turning centres. For personalised technical advice or to arrange procurement of the PWLN clamping holder from Teknik Makina, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for precise configuration and delivery options. Technical data Article number: AP156TM Manufacturer: Teknik Makina ISO designation: PWLNL 2525 Weight: 0.782 kg Total length: 150 mm Shank: 25 x 25 mm Head width: 32 mm Cutting height: 38 mm Cutting angle: 95° Direction: left Accepts inserts: WNMG 0804 Internal coolant: yes Clamping screw: TH821 U-plate: TA020-1 Dowel: TS-4 Knee lever: TL4 Allen key: 3 Allen Facts Weight: 0.782 kg Length: 150 mm Shank size: 25 x 25 mm Head width: 32 mm Cutting height: 38 mm Cutting angle: 95° Special features Left-hand orientation Internal coolant routing Suitable for WNMG 0804 indexable inserts Standard ISO seat PWLNL 2525 Clamping screw TH821 Supplied U-plate TA020-1 Locating dowel TS-4 Knee lever TL4 Allen key interface (3 Allen) FAQ Which inserts fit this toolholder? The PWLN clamping holder is designed to accept WNMG 0804 indexable inserts; the ISO seat PWLNL 2525 ensures correct positioning for these inserts. Is the coolant supplied externally or internal to the holder? Internal coolant is integrated into the holder to deliver cutting fluid directly to the insert tip, improving tool life and chip control for the PWLN toolholder. Can the holder be used for both finishing and roughing? Yes. With a 25 x 25 mm shank and a 95° cutting angle, the holder provides sufficient rigidity for finishing while also supporting moderate roughing tasks when paired with suitable WNMG grades. What fastening parts are required for assembly? Assembly and clamping use the supplied TH821 clamping screw, TA020-1 U‑plate and locating dowel TS-4; the knee lever TL4 and the Allen key interface facilitate secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, robust clamping for WNMG 0804 indexable inserts and a compact 32 mm diameter for reliable internal turning — secure supply and expert advice from Metav Werkzeuge for seamless tool integration and stable production. A25S PWLNL boring bar — PWLN for WNMG indexable inserts, 32 mm, left‑hand, internal coolant (Teknik Cutting Tools) A compact A25S PWLNL boring bar designed for internal turning with PWLN geometry for WNMG indexable inserts, suited to precision turning tasks and stable chip control Internal coolant for controlled chip removal Compatible with WNMG 0804 indexable inserts 32 mm diameter with 25 mm shank Left‑hand orientation for negative rake operations Stable internal turning with assured insert support The A25S PWLNL boring bar is engineered to deliver rigidity where it matters most, enabling repeatable internal turning cycles with reduced vibration. Its compatibility with WNMG 0804 indexable inserts provides a familiar, economical insert family for a wide range of operations. The tool's geometry and secure clamping reduce insert movement and maintain cutting stability, which translates into fewer rejections and more predictable cycle times. Built-in coolant channels support uninterrupted cutting and help manage temperatures at the cutting edge, improving tool life and surface integrity. Controlled chip evacuation and consistent finishes Integrated internal coolant and a defined 95° cutting angle help to direct chips away from the cutting zone and to maintain a stable machining environment. This results in improved surface finish and reduced need for secondary operations. The left‑hand cutting orientation is useful for specialised set‑ups or reversing toolholders and ensures the bar performs as intended in left‑hand turning applications. With a cutting height of 50 mm, the geometry supports effective cutting forces while keeping chip form manageable, helping to reduce machine downtime and improving overall process reliability. Compact dimensions for easy integration and repeatability Designed for straightforward installation, the tool's 32 mm diameter and 25 mm shank allow easy mounting in standard holders while providing the stiffness required for internal work. The 250 mm overall length balances reach and rigidity for many common bores, and the modest mass (0.911 kg) aids in maintaining spindle balance when correctly mounted. The ISO designation A25S PWLNL and clear specification for PWLN for WNMG inserts make tooling planning and procurement transparent and efficient, reducing setup time and simplifying inventory management. Discuss how the Teknik Cutting Tools boring bar with internal coolant and WNMG compatibility can improve machining stability — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AP370TM SKU: AP370TM Brand: Teknik Cutting Tools ISO designation: A25S PWLNL Designation: PWLN for WNMG indexable inserts Core measurements Diameter: 32 mm Shank diameter: 25 mm Overall length: 250 mm Cutting height: 50 mm Weight: 0.911 kg Cutting angle: 95° Special features Internal coolant Left‑hand cutting direction Compatible with WNMG 0804 indexable inserts PWLN insert geometry eClass: 21180806 FAQ Which insert type fits this boring bar? The boring bar accepts WNMG 0804 indexable inserts using the PWLN geometry specified for the A25S PWLNL tool, ensuring stable clamping and predictable chip formation. Is the coolant internal or external? The tool features internal coolant, routed to the cutting edge to support chip evacuation and temperature control during internal turning operations. What are the key dimensions for mounting? Key dimensions include a 32 mm tool diameter, a 25 mm shank diameter and a 250 mm overall length, which together determine compatibility with common toolholders and bar supports. Can this boring bar be used for heavy interrupted cuts? The bar's design emphasises rigidity and secure insert clamping; while it supports stable cutting, suitability for heavy interrupted cuts depends on machine power, holder stiffness and the chosen insert grade. What does the left‑hand orientation mean in practice? Left‑hand cutting direction indicates the bar is configured for turning operations where the cutting action proceeds in a left‑hand sense relative to the spindle — appropriate for designated left‑hand toolholders and setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 95° cutting angle, integrated internal coolant and a sturdy 25 mm shank for stable, long-running turning operations; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar PWLN for WNMG Indexable Inserts — 95° A25S PWLNR (Teknik Makina) The Boring Bar PWLN for WNMG Indexable Inserts is a 95° toolholder designed for precision turning with internal coolant and a compact 25 mm shank for workshop versatility 95° cutting angle for stable engagement Internal coolant for improved chip evacuation Compatible with WNMG 0804 indexable inserts 25 mm shank, 250 mm overall length Stable engagement and consistent surface quality for turning tasks The 95° geometry, specified as 95° cutting angle, together with the A25S PWLNR designation, provides a toolholder profile that favours rigidity and consistent cutting contact. The combination of a 25 mm shank and a 50 mm cutting height reduces vibration during engagement, which translates into improved surface finish and reduced scrap rates. For workshops processing batch work or single components, this stability supports predictable cycle times and repeatable results. Integrated coolant and improved tool life with reliable chip control Integrated internal coolant directs cutting fluid close to the cutting edge, aiding chip evacuation and heat management. This targeted coolant delivery reduces thermal load on the insert and holder, which helps to extend tool life and maintain cutting edge integrity. The result is longer intervals between indexings or insert changes and fewer unplanned stoppages, supporting a smoother production flow and lower operating costs per part. Proven compatibility and practical handling for the shop floor Designed for use with WNMG 0804 indexable inserts, the toolholder is suitable for right-hand turning applications and features an overall length of 250 mm with a nominal 32 mm diameter where applicable. At a weight of 0.911 kg, the bar is robust yet manageable for tool changes and set-up. The ISO designation and compatibility with standard negative-geometry turning inserts simplify procurement and inventory management while ensuring the holder fits established clamping systems. For dependable machining performance from Teknik Makina, contact Metav Werkzeuge for tailored technical advice and fast delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AP360TM Brand: Teknik Makina ISO designation: A25S PWLNR Compatible inserts: WNMG 0804 Cutting direction: right Internal coolant: yes Core specifications Shank diameter: 25 mm Cutting height: 50 mm Overall length: 250 mm Diameter: 32 mm Weight: 0.911 kg Cutting angle: 95° Materials & features For WNMG 0804 indexable inserts ISO A25S PWLNR holder style Right-hand cutting Internal coolant channel SKU: AP360TM FAQ What inserts fit this boring bar? The boring bar is compatible with WNMG 0804 indexable inserts and is designed to accept standard WNMG geometry for reliable clamping and cutting performance. Is the tool suitable for through-coolant applications? Yes, the holder includes internal coolant, allowing cutting fluid to reach the insert edge directly for better chip control and thermal management. What are the key dimensions and mass of the holder? Key dimensions include a 25 mm shank diameter, 250 mm overall length, 50 mm cutting height and a weight of 0.911 kg; the SKU for reference is AP360TM. Which cutting direction is intended for this toolholder? The toolholder is specified for right-hand cutting operations and is set up accordingly. How does the 95° angle affect machining? A 95° cutting angle increases engagement stability and reduces tool deflection in certain turning operations, contributing to improved surface finish and consistent results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a sturdy 95° turning geometry combined with internal coolant and compatibility with WNMG 0804 inserts to maintain stable metal removal and consistent surface quality. Purchase or request technical guidance directly via Metav Werkzeuge for reliable supply and fast dispatch from Emmerich. AP150TM Clamping Holder (PWLN for WNMG indexable inserts) — 95° right-hand, internal coolant (Teknik Makina) The AP150TM is a 95° right-hand clamping holder designed for secure mounting of WNMG 0804 indexable inserts, optimised for reliable turning operations and controlled coolant delivery. 95° cutting angle for stable turning Compatible with WNMG 0804 inserts Internal coolant for improved chip control Robust head profile 20 × 25 mm Consistent machining performance for demanding turning work The 95° tool geometry delivers a stable cutting attitude that reduces vibration and promotes repeatable results when turning medium to heavy sections. Built to accept WNMG 0804 inserts, the holder converts insert grades into predictable cycle times and surface integrity, helping to keep tool change intervals regular and setup time low. The combination of a defined cutting angle and rigid head dimensions supports reliable chip formation and reduced tool deflection for precision turning tasks. Secure clamping and repeatable positioning A secure clamping concept with the specified clamp screw and locating elements provides a constant insert seat and consistent rake engagement. The machined head, with a 20 mm body height and a 25 mm cutting-head width, ensures a positive force transmission from workpiece to holder, which stabilises the cut and lengthens insert life. The right-hand configuration permits conventional feed directions on standard lathes, while the included locating parts (clamp screw TH821, U-plate TA020-1, dowel TS-4, lever TL4) simplify assembly and maintenance, reducing downtime between jobs. Integrated coolant path and workshop fit for practical operation Internal coolant routing supports effective cooling at the cutting edge and aids chip evacuation, which can improve tool life and surface finish when using appropriate coolant and cutting parameters. The holder’s overall length of 125 mm and a cutting height of 30 mm make it suitable for common lathe setups and tooling systems where compact, robust holders are required. At roughly 0.425 kg, the unit balances rigidity with manageable mass for quick handling during tool changes, providing a practical mix of durability and workshop ergonomics. Contact Metav Werkzeuge for tailored technical advice and secure the AP150TM clamping holder with expert shipping from Emmerich Technical data Article number: AP150TM Manufacturer: Teknik Makina Facts Holder height: 20 mm Holder width: 20 mm Cutting-head width: 25 mm Cutting height: 30 mm Overall length: 125 mm Weight: 0.425 kg Cutting angle: 95° Cutting direction: right Special features Compatible insert: WNMG 0804 Internal coolant: yes Clamp screw: TH821 U-plate: TA020-1 Dowel pin: TS-4 Knee lever: TL4 Allen key: 3 FAQ Which insert size fits this holder? The holder is specified for WNMG 0804 indexable inserts and is engineered to provide a secure seat and correct rake for that insert format. Does the holder provide internal coolant? Yes, this clamping holder includes an internal coolant channel to support cooling at the cutting zone and assist chip evacuation. What is the cutting angle and direction of the tool? The toolholder has a 95° cutting angle and is configured for right-hand cutting direction. Which assembly parts are supplied or referenced for mounting? Assembly and locating parts linked to this holder include clamp screw TH821, U-plate TA020-1, dowel TS-4 and knee lever TL4; an Allen key (3) is referenced for adjustment. Is this holder suitable for standard lathe toolposts? With an overall length of 125 mm and a compact head profile, the holder is intended for conventional lathe setups where WNMG 0804 inserts are employed and the stated dimensions are compatible. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust build, precise compatibility with WNMG 0804 inserts and an optimised 95° cutting angle for consistent chip control; order directly via Metav Werkzeuge or consult the team for application-specific advice. Boring bar PWLN for WNMG indexable inserts (S32T PWLNL) by Teknik Makina — 32 mm shank, left‑hand The PWLN boring bar for WNMG indexable inserts delivers a left‑hand turning solution for internal and external machining where stable clamping and predictable chip flow matter most 32 mm shank diameter Compatible with WNMG 0804 inserts Left‑hand design for internal turning 95° cutting angle for reliable chip control Precision that raises throughput and reduces rework The bar is engineered to provide repeatable results under industrial conditions. Its 32 mm shank and ISO designation S32T PWLNL ensure stable mounting in standard tool holders, reducing vibration and the risk of tool chatter. The geometry, matched to WNMG 0804 indexable inserts, translates into consistent cutting engagement and predictable tool life; fewer interruptions for tool changes mean higher effective machine uptime and improved process economy. Easy integration and mechanical reliability on the lathe With a 300 mm overall length, 40 mm diameter and a cutting height of 60 mm, the bar fits typical turret and tool‑post set‑ups while keeping the centre‑of‑mass close to the holder. The left‑hand configuration and a 95° cutting angle support controlled chip evacuation and stable side cutting forces, which simplifies set‑up and reduces the need for frequent readjustment. The component’s mass (approx. 1.764 kg) contributes to damping without excessive inertia, helping to maintain surface finish and dimensional accuracy during extended cuts. Practical application advantages for workshop and production use Compatibility with WNMG 0804 inserts means fast indexable insert changes and broad grade options for different materials and cutting conditions. The holder’s design supports a wide range of turning tasks where left‑hand engagement is required, from finishing grooves to light roughing passes. As a standardised tool, it enables straightforward stock management and quick replacement in multi‑machine environments, supporting predictable scheduling and lower downtime. Contact Metav Werkzeuge for tailored advice on integrating this tool into production and to secure supply from Emmerich — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: P372TM Brand: Teknik Makina Designation: PWLN for WNMG indexable inserts ISO designation: S32T PWLNL Dimensions / Core data Shank diameter: 32 mm Diameter: 40 mm Overall length: 300 mm Cutting height: 60 mm Cutting angle: 95° Weight: 1.764 kg Special features Compatible inserts: WNMG 0804 Cutting direction: left Clamping holder designation: 08 FAQ What insert size is required for this holder? The boring bar accepts WNMG 0804 indexable inserts; the holder geometry is matched to this insert size for correct seating and chip control. Is the tool suitable for left‑hand turning only? Yes — the bar is a left‑hand design and is intended for operations where left‑hand cutting is required. What is the ISO designation of the tool? The tool carries the ISO code S32T PWLNL, which defines the shank and holder style for standard tool posts. Can grades and coatings of inserts be varied for different materials? Different grades and coatings for WNMG 0804 inserts can be selected to suit specific materials and cutting speeds while using this holder. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid shank design and precise indexable-insert compatibility for consistent turning results; the 25 mm shank and 32 mm head diameter provide stability while the tool accepts WNMG 0804 inserts for versatile finishing. Order the Teknik Makina boring bar directly via Metav Werkzeuge or consult their advisors for application-specific recommendations. PWLN for WNMG Indexable Inserts boring bar by Teknik Makina — right-hand, 32 mm head A robust PWLN for WNMG Indexable Inserts boring bar intended for right-hand turning operations, compatible with WNMG 0804 inserts and designed for stable, repeatable metalcutting in workshop and production environments. 25 mm shank diameter for high rigidity Compatible with WNMG 0804 indexable inserts 95° cutting angle for profile accuracy Stable performance for indexable-insert turning The design focuses on delivering consistent cut quality when used with indexable turning inserts. The tool accepts WNMG 0804 inserts, which are a common format for finishing and general turning, enabling predictable geometry and repeatable results. The specified 95° cutting angle supports profile work and controlled tool engagement, reducing the need for extensive rework. This compatibility simplifies tooling logistics and helps maintain a steady production flow with established insert grades. Rigidity and toolholding that reduce vibration A 25 mm shank diameter paired with a 32 mm head diameter gives the bar improved stiffness compared with smaller-shank alternatives. Greater rigidity translates to less chatter, better surface finish and longer insert life under comparable cutting conditions. The tool’s mass of 0.911 kg contributes to stable cutting dynamics without excessive overhang, which is beneficial during medium- to light-duty turning cycles on conventional and CNC lathes where repeatable dimensional accuracy matters. Practical integration and predictable handling With an overall length of 250 mm and the ISO designation S25S PWLNR, the boring bar is straightforward to identify and mount in common toolposts and turret systems. The right-hand cutting direction conforms to typical lathe setups and cutting strategies, so adaptations are minimal. The combination of standard ISO labelling and WNMG insert compatibility supports quick insert changes and predictable tool indexing, reducing downtime and keeping throughput steady in both jobbing and batch production. Contact Metav Werkzeuge for application-specific advice on Teknik Makina boring bars and ensure the right clamping and insert choice for reliable workshop performance Technical data Article number: P360TM Manufacturer: Teknik Makina Name: PWLN for WNMG Indexable Inserts ISO designation: S25S PWLNR Weight: 0.911 kg Facts Diameter: 32 mm Shank diameter: 25 mm Cutting edge height: 50 mm Overall length: 250 mm Cutting angle: 95° Special features Right-hand cutting direction For WNMG 0804 indexable inserts PWLN geometry for insert turning FAQ What inserts fit this boring bar? The boring bar is specified for WNMG 0804 indexable inserts; Teknik Makina's PWLN geometry and the ISO designation S25S PWLNR ensure correct seating for that insert format (SKU P360TM). Is the bar suitable for CNC turret use? Yes — the bar’s 25 mm shank and 250 mm overall length are compatible with standard turret and toolpost clamping; the design supports stable cutting when securely mounted. What does the 95° cutting angle mean in practice? A 95° cutting angle provides a near-neutral approach suitable for profile turning and finishing; this geometry helps maintain dimensional stability when using WNMG 0804 inserts on the PWLN toolholder. Can the bar be used for heavy roughing cuts? The PWLN boring bar is optimised for rigidity and finishing operations with indexable inserts; for heavy roughing, assessment of insert grade and machine power is recommended before use with the Teknik Makina PWLN boring bar (P360TM). How does the shank diameter affect performance? The 25 mm shank diameter increases stiffness compared with smaller shanks, reducing deflection and vibration for improved surface finish and longer insert life on both manual and CNC lathes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of left‑hand cutting, compatibility with WNMG 0804 indexable inserts and a 25 mm shank for secure clamping; order directly via Metav Werkzeuge or contact our consultants for application advice. PWLN Boring Bar P370TM — for WNMG indexable inserts, left‑hand cutting The PWLN Boring Bar P370TM is a left‑hand external turning bar designed to accept WNMG 0804 indexable inserts, offering a rigid shank and a compact overall length for straightforward integration into standard turning centres. Compatible with WNMG 0804 inserts Shank Ø 25 mm for rigid clamping 95° cutting angle for stable cuts Stability and precision for consistent turning results The design prioritises rigidity and reproducible tool geometry to reduce vibration and improve surface finish. With a shank diameter of 25 mm and a cutting angle of 95°, the bar provides a stable support for the insert, which in turn reduces chatter during medium‑duty external turning operations. The specified cutting height of 50 mm ensures correct seating of the indexable insert, so setup is more predictable and repeatable. These characteristics translate into fewer rejected parts and a steadier process window on the shop floor. Predictable chip behaviour and insert compatibility Engineered for use with WNMG 0804 indexable inserts, the toolholder geometry supports reliable chip formation and evacuation when cutting in the left direction. The ISO designation S25S PWLNL indicates the shank and holder form factor, helping maintenance teams and buyers select compatible clamping systems and spare parts. Because the bar accepts a widely used insert format, stock management is simplified and changeover times are reduced, supporting efficient production runs without complex tooling inventories. Compact integration and workshop reliability With an external diameter of 32 mm, overall length 250 mm and a service weight of 0.911 kg, the boring bar is compact enough for confined setups yet substantial enough to deliver stable performance. The model’s compatibility with a clamp holder designation 08 facilitates direct replacement in many existing toolposts, minimising downtime. Marked by measured, domain‑specific engineering rather than unnecessary complexity, this bar is suited to workshops seeking a balance of robustness and straightforward handling. Contact Metav Werkzeuge for tailored application advice on the PWLN boring bar P370TM and procurement from our Emmerich stock at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: P370TM Manufacturer: Teknik Makina Shank diameter: 25 mm Overall length: 250 mm External diameter: 32 mm Cutting height: 50 mm Weight: 0.911 kg Cutting angle: 95° Compatible inserts: WNMG 0804 Cutting direction: left ISO designation: S25S PWLNL Clamp holder designation: 08 FAQ What insert type does the boring bar accept? The PWLN boring bar is designed for WNMG 0804 indexable inserts and seats them at the specified cutting height of 50 mm for reliable engagement. Is the bar suitable for right‑hand and left‑hand turning? This tool is specified for left‑hand cutting; the geometry and rake are optimised accordingly. What are the key dimensions for machine setup? Relevant dimensions include a shank diameter of 25 mm, overall length 250 mm and an external diameter of 32 mm, which help determine compatibility with existing toolposts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust clamping, internal coolant and precise cutting geometry to secure stable turning performance; the right‑hand PWLN holder ensures reliable seating of WNMG 0804 inserts and straightforward integration via Metav Werkzeuge for machining continuity and procurement support. PWLN for WNMG Indexable Inserts — PWLNR 2525 toolholder (right‑hand, internal coolant) The PWLN for WNMG Indexable Inserts is a right‑hand turning toolholder designed for WNMG 0804 inserts, offering internal coolant and a compact 25 × 25 mm shank for consistent lathe mounting Right-hand toolholder for turning applications Fits WNMG 0804 indexable inserts Internal coolant for controlled lubrication Robust 25 × 25 mm shank, 150 mm overall length Reliable clamping for consistent turning results A stable clamp interface is central to repeatable turning. The toolholder, specified as PWLNR 2525, combines a 25 × 25 mm shank with a sturdy clamp screw (TH821) to secure WNMG inserts with minimal radial runout. This translates into consistent cutting forces and reduced vibration, which helps maintain tolerances over batch runs; the moderate mass (0.782 kg) delivers good inertial damping without adding excessive load on tool posts. Optimised chip control and coolant delivery Built‑in internal coolant channels enable targeted coolant delivery directly to the cutting zone, improving chip evacuation and thermal management. For operations requiring sustained contact with the workpiece, this feature reduces heat build‑up at the cutting edge and can extend insert life. Controlled lubrication also contributes to a cleaner surface finish and lowers the risk of built‑up edge when machining challenging materials with indexable inserts. Precision geometry for dependable right‑hand turning The holder’s 95° cutting angle and defined head geometry position WNMG 0804 inserts for predictable engagement in right‑hand turning. With a cutting height of 38 mm and a cutting‑head width of 32 mm, the assembly provides a balance between rigidity and accessibility at the tool tip. This geometry supports stable chip flow and predictable tool behaviour, which is particularly beneficial for repeatable facing and light to medium turning tasks. Straightforward assembly and maintenance on the shop floor Installation and routine upkeep are simplified by the included accessory interfaces: U‑plate TA020‑1, dowel TS‑4, lever TL4 and the matching 3‑Allen key. These parts enable rapid mounting and secure clamping of inserts without specialised jigs. The overall length of 150 mm offers a compact footprint while the standardised ISO designation aids compatibility checks when replacing holders or organising tooling inventories. Contact Metav Werkzeuge to discuss Teknik Cutting Tools’ right‑hand PWLN toolholder with internal coolant and confirm suitability for specific turning tasks — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AP151TM Manufacturer: Teknik Makina Designation: PWLN for WNMG Indexable Inserts (PWLNR 2525) SKU: AP151TM Facts Shank: 25 × 25 mm Cutting head width: 32 mm Cutting height: 38 mm Overall length: 150 mm Weight: 0.782 kg Cutting angle: 95° Cutting direction: right‑hand Compatible inserts: WNMG 0804 Special features Internal coolant Clamp screw: TH821 U‑plate: TA020-1 Dowel: TS-4 Lever: TL4 Allen key: 3 Allen ISO designation: PWLNR 2525 Drill rod: M08-IKG1/8 FAQ What inserts are supported by this holder? The holder accepts WNMG 0804 indexable inserts; the toolholder is supplied in the PWLNR 2525 format for standard lathe tool posts. Is the coolant internal or external? This turning holder features internal coolant, which delivers lubrication directly to the cutting zone for improved chip control and thermal management. Which handedness does the toolholder have? The holder is configured for right‑hand cutting, matching common turning orientations for facing and external turning operations. What are the key mounting components supplied or required? Mounting and clamping use standard parts such as the TH821 clamp screw, U‑plate TA020‑1, dowel TS‑4 and lever TL4; a 3‑Allen key is specified for assembly. How does the holder geometry affect machining stability? The 95° cutting angle and compact head dimensions position the insert for stable engagement, promoting consistent cutting forces and repeatable surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise clamping, integrated internal coolant and a 95° cutting angle for consistent chip control and repeatable turning results; the compact 125 mm design reduces interference in tight set-ups. Order the clamping holder directly via Metav Werkzeuge or consult the Metav team for application advice. Klemmhalter PWLN for WNMG Indexable Inserts — left-hand clamping holder with internal coolant (Teknik Makina) The Klemmhalter PWLN for WNMG Indexable Inserts is a left-hand clamping holder intended for turning operations with WNMG 0804 inserts, offering integrated coolant delivery and a rigid PWLNL 2020-style mounting *Left-hand turning holder for WNMG 0804 inserts *Internal coolant for improved chip evacuation *95° cutting angle for stable facing and turning *125 mm overall length, robust 20 mm shank Increased process stability through precise geometry The clamping tool is engineered for repeatable performance: compatibility with WNMG 0804 inserts and the PWLNL 2020 mounting ensure a standardised fit across common indexable insert systems. The 95° cutting angle reduces radial forces during facing and roughing, which contributes directly to longer tool life and more predictable component tolerances. Because the toolholder is designed for left-hand orientation, it is immediately suitable for lathes and turning centres configured for left-hand operations, preventing setup ambiguity and minimising changeover time. Reliable chip evacuation and cooling for higher productivity Integrated internal coolant channels deliver cutting fluid close to the cutting edge, which aids chip control and heat dissipation during demanding cuts. The result is improved surface finish and reduced thermal wear on the insert, translating into fewer interruptions for regrinding or insert changes. Combined with the holder’s compact 125 mm overall length and a cutting height of 30 mm, the design balances rigidity and access, enabling higher material removal rates where stable clamping is required. Practical fastening and compact handling for workshop efficiency Clamping is secured using the designated TH821 clamping screw together with the matching U-plate TA020-1, dowel TS-4 and lever TL4, providing a secure, repeatable seat for inserts. The holder’s modest mass (0.425 kg) and a shank dimension of 20 × 20 mm make tool changes straightforward and reduce spindle load during acceleration. Basic maintenance and setup require only the supplied 3 Allen key sizes, so downtime for assembly or replacement is kept to a minimum. Application benefits and suitability This holder excels in turning tasks that demand consistent chip flow and coolant at the cutting zone: facing, light roughing and finishing on steel and alloy components where WNMG geometry is appropriate. The compact head width (25 mm) and robust shank provide a balance between accessibility and stiffness, which is particularly useful in confined tool pockets or multi-tool turrets. The result is fewer rejects, steadier surface quality and a predictable machining cycle time. For application recommendations or to secure the Teknik Cutting Tools clamping holder AP155TM, contact Metav Werkzeuge in Emmerich for tailored technical advice and prompt supply via e‑mail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: AP155TM Manufacturer: Teknik Makina Designation: Clamping holder PWLN for WNMG indexable inserts ISO designation: PWLNL 2020 Core specifications Overall length: 125 mm Head width: 25 mm Holder width: 20 mm Holder height: 20 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.425 kg Insert size compatibility: WNMG 0804 Cutting direction: left-hand Internal coolant: yes Special features Clamping screw: TH821 U-plate: TA020-1 Dowel: TS-4 Knee lever: TL4 Allen key set: 3 Allen Compatible boring bar: K08-IKG1/8 FAQ Is this holder compatible with standard WNMG inserts? The clamping holder PWLN for WNMG indexable inserts is specified for WNMG 0804 inserts and uses the PWLNL 2020 mounting style to ensure a standardised fit. Can the holder be used with through‑coolant systems? Yes, the holder features internal coolant channels to deliver cutting fluid close to the cutting edge for improved chip control and cooling. Which cutting direction is supported by this toolholder? This toolholder is configured for left‑hand cutting direction, suitable for left‑hand turning set-ups or specific machining arrangements requiring left‑hand orientation. What fastening parts are required for installation? Installation uses the TH821 clamping screw, U‑plate TA020-1, dowel TS‑4 and knee lever TL4; the product specification AP155TM lists these matching components. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com