125mm Precision Clamp Holder PWLNL 2020 PWLN for WNMG 0804, 95° Cut Angle, Internal Coolant, Left-Hand Cutting - Teknik Makina
€77.00
Product information "125mm Precision Clamp Holder PWLNL 2020 PWLN for WNMG 0804, 95° Cut Angle, Internal Coolant, Left-Hand Cutting - Teknik Makina"
Take advantage of precise clamping, integrated internal coolant and a 95° cutting angle for consistent chip control and repeatable turning results; the compact 125 mm design reduces interference in tight set-ups. Order the clamping holder directly via Metav Werkzeuge or consult the Metav team for application advice.
Klemmhalter PWLN for WNMG Indexable Inserts — left-hand clamping holder with internal coolant (Teknik Makina)
The Klemmhalter PWLN for WNMG Indexable Inserts is a left-hand clamping holder intended for turning operations with WNMG 0804 inserts, offering integrated coolant delivery and a rigid PWLNL 2020-style mounting
*Left-hand turning holder for WNMG 0804 inserts *Internal coolant for improved chip evacuation *95° cutting angle for stable facing and turning *125 mm overall length, robust 20 mm shank
Increased process stability through precise geometry
The clamping tool is engineered for repeatable performance: compatibility with WNMG 0804 inserts and the PWLNL 2020 mounting ensure a standardised fit across common indexable insert systems. The 95° cutting angle reduces radial forces during facing and roughing, which contributes directly to longer tool life and more predictable component tolerances. Because the toolholder is designed for left-hand orientation, it is immediately suitable for lathes and turning centres configured for left-hand operations, preventing setup ambiguity and minimising changeover time.
Reliable chip evacuation and cooling for higher productivity
Integrated internal coolant channels deliver cutting fluid close to the cutting edge, which aids chip control and heat dissipation during demanding cuts. The result is improved surface finish and reduced thermal wear on the insert, translating into fewer interruptions for regrinding or insert changes. Combined with the holder’s compact 125 mm overall length and a cutting height of 30 mm, the design balances rigidity and access, enabling higher material removal rates where stable clamping is required.
Practical fastening and compact handling for workshop efficiency
Clamping is secured using the designated TH821 clamping screw together with the matching U-plate TA020-1, dowel TS-4 and lever TL4, providing a secure, repeatable seat for inserts. The holder’s modest mass (0.425 kg) and a shank dimension of 20 × 20 mm make tool changes straightforward and reduce spindle load during acceleration. Basic maintenance and setup require only the supplied 3 Allen key sizes, so downtime for assembly or replacement is kept to a minimum.
Application benefits and suitability
This holder excels in turning tasks that demand consistent chip flow and coolant at the cutting zone: facing, light roughing and finishing on steel and alloy components where WNMG geometry is appropriate. The compact head width (25 mm) and robust shank provide a balance between accessibility and stiffness, which is particularly useful in confined tool pockets or multi-tool turrets. The result is fewer rejects, steadier surface quality and a predictable machining cycle time.
For application recommendations or to secure the Teknik Cutting Tools clamping holder AP155TM, contact Metav Werkzeuge in Emmerich for tailored technical advice and prompt supply via e‑mail info@metav-werkzeuge.com or phone +49 2822 7131930
Technical data
- Article number: AP155TM
- Manufacturer: Teknik Makina
- Designation: Clamping holder PWLN for WNMG indexable inserts
- ISO designation: PWLNL 2020
Core specifications
- Overall length: 125 mm
- Head width: 25 mm
- Holder width: 20 mm
- Holder height: 20 mm
- Cutting height: 30 mm
- Cutting angle: 95°
- Weight: 0.425 kg
- Insert size compatibility: WNMG 0804
- Cutting direction: left-hand
- Internal coolant: yes
Special features
- Clamping screw: TH821
- U-plate: TA020-1
- Dowel: TS-4
- Knee lever: TL4
- Allen key set: 3 Allen
- Compatible boring bar: K08-IKG1/8
FAQ
Is this holder compatible with standard WNMG inserts?
The clamping holder PWLN for WNMG indexable inserts is specified for WNMG 0804 inserts and uses the PWLNL 2020 mounting style to ensure a standardised fit.
Can the holder be used with through‑coolant systems?
Yes, the holder features internal coolant channels to deliver cutting fluid close to the cutting edge for improved chip control and cooling.
Which cutting direction is supported by this toolholder?
This toolholder is configured for left‑hand cutting direction, suitable for left‑hand turning set-ups or specific machining arrangements requiring left‑hand orientation.
What fastening parts are required for installation?
Installation uses the TH821 clamping screw, U‑plate TA020-1, dowel TS‑4 and knee lever TL4; the product specification AP155TM lists these matching components.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Klemmhalter |
| Diameter-1: | mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.