Klemmhalter 95° PWLNL 2525 M08-IKG1/8 for WNMG 0804 Innenkühlung linksschneidend - Teknik Makina
€81.00
Product information "Klemmhalter 95° PWLNL 2525 M08-IKG1/8 for WNMG 0804 Innenkühlung linksschneidend - Teknik Makina"
Take advantage of a robust combination of rigidity and reliable chip control: the left-hand PWLN clamping holder accepts WNMG 0804 inserts and features internal coolant, ensuring longer insert life and consistent turning results. Order the holder directly via Metav Werkzeuge or request advice from the consultants if clarification is needed.
PWLN for WNMG Indexable Inserts (PWLNL 2525) — left-hand clamping holder with internal coolant by Teknik Makina
The PWLN for WNMG Indexable Inserts is a left-hand turning toolholder engineered for secure clamping of WNMG 0804 inserts, offering internal coolant and a 25 x 25 mm shank for stable finishing and roughing operations.
- Left-hand toolholder for turning operations
- Internal coolant for optimised chip evacuation
- Shank 25 x 25 mm, cutting height 38 mm
- Accepts WNMG 0804 indexable inserts
Improved stiffness for repeatable turning results
A square shank of 25 x 25 mm combined with a well-balanced overall length of 150 mm delivers the rigidity required for repeatable turning and stable finish quality. The ISO designation PWLNL 2525 signals a standardised mounting form that reduces setup time on production lathes. With a measured mass of 0.782 kg, the carrier maintains tool stability without excessive overhang, which helps to lower vibration and improve dimensional consistency in batch production.
Cooler cutting edge, longer insert life
Built-in internal coolant directs lubricant to the cutting edge, reducing temperature peaks and improving chip breaking when machining common external diameters. Matched to the 95° cutting angle and optimised for WNMG 0804 inserts, this configuration supports extended insert life and predictable tool wear. The result is fewer indexings, lower tooling cost per component and higher uptime — a clear efficiency advantage for series production and workshop jobs alike.
Secure clamping and straightforward maintenance
Clamping integrity is provided by the TH821 clamping screw together with the TA020-1 U‑plate and locating dowel TS-4, ensuring repeatable seat alignment and positive axial retention. The supplied knee lever TL4 and a 3 Allen key interface simplify service procedures and insert changes, reducing downtime. These service-oriented fittings are intended to let maintenance staff complete insert swaps rapidly while maintaining consistent cutting geometry.
Compatibility and shop-floor reliability
As a left-hand turning holder, the carrier suits conventional toolpost arrangements where the schnittrichtung (cutting direction) is left; this straightforward orientation avoids ambiguity during set-up. Manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge’s European quality filter, the assembly benefits from an established supply chain and documentation that supports industrial use. The combination of standardised interfaces and robust coolant routing makes this an economical choice for both small workshops and automated turning centres.
For personalised technical advice or to arrange procurement of the PWLN clamping holder from Teknik Makina, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for precise configuration and delivery options.
Technical data
- Article number: AP156TM
- Manufacturer: Teknik Makina
- ISO designation: PWLNL 2525
- Weight: 0.782 kg
- Total length: 150 mm
- Shank: 25 x 25 mm
- Head width: 32 mm
- Cutting height: 38 mm
- Cutting angle: 95°
- Direction: left
- Accepts inserts: WNMG 0804
- Internal coolant: yes
- Clamping screw: TH821
- U-plate: TA020-1
- Dowel: TS-4
- Knee lever: TL4
- Allen key: 3 Allen
Facts
- Weight: 0.782 kg
- Length: 150 mm
- Shank size: 25 x 25 mm
- Head width: 32 mm
- Cutting height: 38 mm
- Cutting angle: 95°
Special features
- Left-hand orientation
- Internal coolant routing
- Suitable for WNMG 0804 indexable inserts
- Standard ISO seat PWLNL 2525
- Clamping screw TH821
- Supplied U-plate TA020-1
- Locating dowel TS-4
- Knee lever TL4
- Allen key interface (3 Allen)
FAQ
Which inserts fit this toolholder?
The PWLN clamping holder is designed to accept WNMG 0804 indexable inserts; the ISO seat PWLNL 2525 ensures correct positioning for these inserts.
Is the coolant supplied externally or internal to the holder?
Internal coolant is integrated into the holder to deliver cutting fluid directly to the insert tip, improving tool life and chip control for the PWLN toolholder.
Can the holder be used for both finishing and roughing?
Yes. With a 25 x 25 mm shank and a 95° cutting angle, the holder provides sufficient rigidity for finishing while also supporting moderate roughing tasks when paired with suitable WNMG grades.
What fastening parts are required for assembly?
Assembly and clamping use the supplied TH821 clamping screw, TA020-1 U‑plate and locating dowel TS-4; the knee lever TL4 and the Allen key interface facilitate secure and repeatable clamping.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Klemmhalter |
| Diameter-1: | mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.