1500 kg Floor Scale 0.5 kg Readability, IP67 Stainless Steel Platform 1000×1000 mm - KERN

Take advantage of the 15 m special length and the secure link between indicator and platform for flexible scale installation; compatibility notes require checking models with optional calibration before purchase. Order the cable directly via Metav Werkzeuge or consult our specialists for application advice. BFB-A03 connection cable for scales by KERN — 15 m special length The BFB-A03 is a 15 m connection cable designed to link a scale indicator and its weighing platform, suitable for industrial and workshop weighing setups where extended separation is required 15 m special length for flexible layouts Designed for indicator-to-platform connection Not retrofit‑compatible on calibrated models Suitable for industrial weighing installations Flexible installation that keeps the workspace organised The extended 15 m run enables placing the weighing indicator at a convenient workstation while the platform remains in the process area, so measurement points and operator stations can be separated without resorting to makeshift extensions. This layout reduces clutter on the bench and minimises the need to reposition heavy platforms, delivering a more efficient workflow. The long reach also simplifies integration into existing production lines where direct proximity is impractical. Clear compatibility guidance to avoid costly errors Compatibility is decisive when selecting this accessory. The cable is intended specifically for connection between evaluation unit and platform and is not retrofit‑compatible on models with optional calibration, which means certain scale configurations require ordering the cable at the time of initial system specification. For installations where calibration options have been selected later, an alternative factory‑approved connection must be used. This transparency prevents downtime and supports a reliable measuring chain. Practical benefits for industrial weighing applications Beyond mere length, the design focuses on dependable signal transmission and straightforward installation in workshop and industrial contexts. The robust construction suits routine handling and fixed installations, helping to maintain consistent measurement performance. Combined with Metav Werkzeuge’s role as a quality filter for the European market, the accessory contributes to a predictable supply chain and dependable product selection for professionals seeking long‑term reliability. Contact Metav Werkzeuge in Emmerich for compatibility checks and to secure the KERN BFB-A03 15 m connection cable — expert advice and prompt dispatch available from our warehouse to your workbench Technical data Article number: BFB-A03 Manufacturer: KERN GTIN: 4045761161788 Country of origin: China Core data Cable length: 15 m Weight: 3.5 kg Tariff code: 84239010 eCl@ss: 21131814 Special features Function: connection between indicator and platform Note: not retrofit-compatible for models with optional calibration Product group: scales accessories Category path: Scales › Accessories FAQ Is this cable suitable for remote mounting of the indicator? The BFB-A03 cable by KERN is intended precisely for remote mounting, enabling the indicator to be positioned up to 15 m from the platform for ergonomic or process-driven installations. Can the cable be fitted afterwards if calibration was added later? No, the cable is not retrofit‑compatible on models that use an optional calibration package; the BFB-A03 must be confirmed as suitable for the specific scale configuration before procurement. Which devices is the BFB-A03 compatible with? Compatibility depends on the scale model and its factory options; the BFB-A03 is a connection cable for indicator-to-platform links on compatible KERN weighing systems. Where does this cable ship from and who supplies it? The KERN BFB-A03 is supplied via Metav Werkzeuge’s stock in Emmerich, with logistics set up for reliable delivery to industrial and workshop customers. Manufacturer: KERN — Origin: China

A compact table base with an integrated wall holder enables flexible table or wall mounting for the weighing indicator and keeps the workspace tidy. Benefit from the lightweight 0.25 kg design and dependable KERN quality; order the accessory directly via Metav Werkzeuge or consult our specialists if required. Table base EOC-A04 – Table base with wall holder for EOC-A04 (KERN) A Table base EOC-A04 designed for secure table or wall mounting of the EOC‑A04 weighing indicator, ideal for compact workshop and production environments. Includes wall holder for EOC-A04 mounting Compact table base with integrated wall bracket Lightweight: 0.25 kg for easy handling Save bench space with flexible mounting The combination of a stable table base and an included wall holder allows the weighing indicator to be positioned where it best supports the workflow, whether temporarily on a bench or permanently on a wall. This flexibility reduces clutter, simplifies access to the display and contributes to faster weighing cycles. The design suits tight workstations and helps maintain a clear, organised production area, improving throughput and operator efficiency. Quick installation for uninterrupted operation Fitted specifically for the weighing indicator, the included bracket enables straightforward mounting and reassignment between table and wall positions. Minimising installation time supports continuous operation and reduces setup-related downtime. The accessory’s compact format and low mass make handling and reinstallation swift, supporting rapid changeovers in busy environments without needing additional fixtures. Built for workshop compatibility and trusted sourcing Delivered by KERN and categorised for scale accessories, the product is meant to integrate seamlessly with common weighing setups. The low weight, 0.25 kg, makes it practical for frequent repositioning while the included wall bracket ensures consistent alignment of the indicator. As a supplier, Metav combines decades of experience with a broad product range, offering a reliable quality filter from Emmerich to European workshops and trade customers. Contact Metav Werkzeuge in Emmerich for ordering or technical clarification — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Article number: EOC-A04 SKU: EOC-A04 GTIN: 4045761192485 Manufacturer: KERN Origin: CN Tariff number: 84239010 Facts Weight: 0.25 kg eClass: 21160592 Special features Includes wall holder for mounting the EOC-A04 indicator Product category: Scales — Accessories Product group: Mounting bracket FAQ Is the bracket compatible with the EOC-A04 indicator? The included wall holder is designed specifically for the EOC‑A04 indicator and supports both table and wall installation. How much does the accessory weigh? The table base with wall holder has a weight of 0.25 kg. Who manufactures this accessory? The accessory is produced by KERN and supplied under the designation EOC‑A04. Can the base be moved between workstations easily? Yes, the compact and lightweight design allows simple repositioning between benches or walls as needed. KERN — Origin: China — Contact: not provided

Take advantage of reliable digital output and compact installation to secure consistent data transfer from your weighing equipment; the Ethernet connection and factory-fit design ensure straightforward network integration and low installation footprint — order via Metav Werkzeuge or consult our technical advisers for compatibility checks. KIB-A02 Ethernet data interface by KERN — Ethernet connectivity, compact design The KIB-A02 is an Ethernet data interface for precision scales, designed to provide stable digital transmission for laboratory and industrial weighing systems. Ethernet interface for precision scales Compact design, only 40 g weight Factory-fit device, not retrofittable Manufacturer KERN, SKU KIB-A02 Consistent digital output for precise process control The KIB-A02 provides a direct Ethernet link between weighing instruments and process networks, reducing manual data entry and the associated error risk. By delivering a continuous digital stream, the interface supports higher process efficiency and traceability; the emphasis on data integrity and deterministic transfer helps maintain measurement records without additional conversion hardware. Integration into existing IT landscapes is simplified by using standard network protocols, making the device suitable for both production lines and laboratory data acquisition systems. Small footprint and installation benefits that save space With a lightweight construction of 0.04 kg (40 g) and a compact form factor, the interface minimises its spatial impact within the weighing setup. The unit is supplied as a factory-fit accessory and is not retrofittable, which preserves calibration status and mechanical integrity when installed. These characteristics reduce installation time and the need for auxiliary mounting hardware, supporting faster commissioning and a cleaner system layout while keeping mechanical influence on the weighing device to a minimum. Supply reliability and practical support for industrial use Sourcing through Metav Werkzeuge ensures access to a broad portfolio of metrology and workshop products together with dependable logistics from Emmerich on the Rhine. The distribution model focuses on consistent availability and a centralised supply chain, which is particularly valuable for facilities managing multiple measurement points. If technical clarification or compatibility verification is required, Metav’s consultants can advise on suitable configurations and network integration to align with existing scale models and IT requirements. Contact Metav Werkzeuge for compatibility advice and to procure the KIB‑A02 Ethernet data interface directly from our Emmerich warehouse Technical data Article number: KIB-A02 Manufacturer: KERN GTIN: 4045761207028 Country of origin: China Weight: 0.04 kg Harmonised tariff code: 84239010 ECLASS: 19050111 Core figures Weight: 0.04 kg GTIN: 4045761207028 Harmonised tariff code: 84239010 ECLASS: 19050111 Special features Ethernet data interface for precision scales Factory-fit only, not retrofittable Accessory for scales (Zubehör) Manufacturer SKU KIB-A02 Origin: China FAQ Is the interface compatible with all KERN scales? Compatibility depends on the scale model and its communication options; the KIB-A02 Ethernet data interface is designed for use with KERN weighing equipment that supports a network connection, and Metav can advise on specific model compatibility. Can the device be retrofitted to existing scales? The device is supplied as a factory-fit accessory and is not retrofittable, so retrofitting to scales that were not prepared for it is not supported. What are the physical dimensions and weight of the interface? The interface has a compact footprint and a weight of 0.04 kg (40 g); exact mounting dimensions are available on request from the manufacturer or Metav. Which standards or protocols does the interface use? The unit provides standard Ethernet connectivity for digital data transfer; protocol specifics and integration details should be confirmed for the target system. KERN — Origin: China — GTIN: 4045761207028

Take advantage of a compact, reliable USB data interface that ensures fast, error‑reduced transfer of measurement results and straightforward integration into existing workflows; benefit from KERN engineering and expert supply via Metav Werkzeuge for dependable delivery and technical guidance. KERN USB data interface KIB-A03 — plug‑and‑play connection for scales, not retrofittable A KERN USB data interface KIB-A03 designed to transfer weighing and measurement data directly to computers and data loggers, intended as an integrated accessory for KERN scales and lab devices. USB connection for KERN scales Plug-and-play serial data transfer Compact design, low weight 0.38 kg Not retrofittable — fixed integration Faster, more reliable data transfer to prevent costly input errors The interface module replaces manual transcription with direct digital capture, reducing administrative effort and the risk of transcription mistakes. With its USB connection and straightforward serial data output, the unit enables consistent data transfer from measuring instruments into spreadsheets and database systems. This rational improvement supports quality assurance processes, speeds up documentation and ensures that production and inspection records remain auditable and consistent. Seamless integration that preserves traceability and throughput Lightweight and compact, the module adds data logging capability without imposing significant installation or handling burden—the housing and cabling are sized for workshop and laboratory benches. At 0.38 kg, the module is unobtrusive yet robust, allowing secure mounting close to measurement points and quick connection to a host PC. By enabling electronic capture and timestamped records, the device strengthens traceability within production chains and simplifies batch documentation for audits. Engineered for dependable workshop use and clear product lifecycle expectations Manufactured by KERN, the unit is supplied as an accessory that must be specified at the time of equipment purchase because it is not retrofittable. This fixed‑integration approach avoids retrofit complexity and preserves calibration status and compliance of the measuring system. For businesses seeking a pragmatic balance of reliability and ease of use, the module fits well into established metrology processes and delivers measurable time savings during routine measuring tasks. Metav Werkzeuge supports selection and supply as a dedicated partner for precision equipment. For integration advice or to secure supply of the KERN USB data interface KIB-A03, contact Metav Werkzeuge in Emmerich for availability and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 — assistance also available by WhatsApp at +49 170 2837271 Technical data Article number: KIB-A03 SKU: KIB-A03 Manufacturer: KERN GTIN: 4045761207035 Origin: China Tariff number: 84239010 eClass: 19050111 Facts Net weight: 0.38 kg GTIN: 4045761207035 Tariff number: 84239010 eClass: 19050111 Special features Accessory for scales (Zubehör) Not retrofittable Intended for direct USB data output Supplied by KERN FAQ What devices is the interface compatible with? The KERN USB data interface KIB-A03 is intended as an accessory for compatible KERN weighing and measuring instruments and provides direct USB output for serial data capture. Can the interface be installed on existing scales? The module is not retrofittable; it is supplied for integration with specific KERN devices and should be specified when ordering the instrument. Which data formats does the interface support? The KERN USB data interface outputs serial measurement data suitable for capture by PC applications and data loggers; exact protocol details depend on the connected KERN instrument and its documentation. Who supplies the module and where can help be obtained? The accessory is manufactured by KERN and available via Metav Werkzeuge; Metav provides procurement and consultative support for integration into workshop workflows. KERN — Origin: China. Manufacturer contact information not provided.

Take advantage of dependable visual signalling and a built‑in connection option to standardise status feedback across weighing stations; the compact, robust design and clear integration path simplify installation and ongoing operation. Order the unit directly via Metav Werkzeuge or consult our team for application advice. KIB-A06 Signal lamp – indicator light with integrated interface by KERN The KIB-A06 Signal lamp offers clear visual status indication for scales and weighing systems, engineered for workshops and industrial environments where unambiguous signalling is essential. Indicator light for weighing systems Integrated interface for direct connection Non-retrofittable design for fixed installations Fast dispatch from European warehouse Reduce downtime with instant, unambiguous alerts A single, unmistakable visual signal reduces interpretation errors on the shop floor. The signal lamp delivers visual status indication that is immediately recognisable by operators, enabling faster reactions to process events and fewer interruptions. This tangible improvement in workflow clarity translates into measurable time savings on repetitive tasks and fewer inspection delays, supporting continuous production flow. Seamless connection cuts integration effort The built‑in integrated interface means the lamp can be connected directly to compatible weighing systems and control panels without additional adapters. For technical teams this reduces wiring complexity and shortens commissioning time. Where control logic or stack lights are already in place, the lamp’s direct connectivity simplifies electrical planning and keeps installation costs transparent and predictable. Robust design for everyday industrial use Constructed to suit routine workshop conditions, the lamp balances sturdy construction with a compact footprint. The moderate mass of 1.04 kg contributes to a secure mounting and a stable presence on signalling posts or brackets. The fixed‑configuration approach is intended for installations where a permanent signalling solution is required rather than frequent retrofits. Supply reliability and tailored procurement benefits Sourcing through Metav Werkzeuge provides access to centralised stock management and a European distribution point in Emmerich, which supports dependable replenishment and straightforward ordering. The combination of product quality, direct connectivity and consistent supply reduces procurement complexity for maintenance planners and purchasing teams, helping to streamline inventory and supplier consolidation. Contact Metav Werkzeuge today for advice on integrating the KIB-A06 signal lamp into existing weighing systems and to arrange prompt delivery from our Emmerich warehouse via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: KIB-A06 Manufacturer: KERN SKU: KIB-A06 GTIN: 4045761207066 Origin country: CN ECLASS: 27110631 ETIM: EC000399 HS code: 84239010 Facts Weight: 1.04 kg Special features Integrated interface Non-retrofittable Suitable for scales – accessories Category: Zubehör (scales accessories) FAQ What applications is the signal lamp suitable for? The signal lamp is designed for status signalling on weighing systems and station equipment; it fits industrial and workshop environments where clear visual feedback is required. Does the device include a connection interface? Yes, the KIB-A06 from KERN features an integrated interface for direct connection to compatible control hardware. Can the lamp be retrofitted to existing systems? The KIB-A06 has a non-retrofittable design intended for fixed installations rather than incremental retrofitting. What is the weight of the signal lamp and does it affect mounting? The unit weighs 1.04 kg, which supports stable mounting on posts and brackets commonly used in industrial signalling setups. Is the lamp supplied from a European warehouse? Stock and dispatch are managed for fast processing via Metav Werkzeuge’s European distribution channels. Manufacturer: KERN · Address: China · Contact: info@metav-werkzeuge.com / +49 2822 7131930

Take advantage of a robust, powder-coated steel ramp that simplifies loading onto workshop scales and reduces handling time; its substantial mass and durable finish support stable weighing operations, so order the component directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN BIC-A01 Loading Ramp — powder-coated steel, workshop-grade run-on solution The KERN BIC-A01 Loading Ramp is a sturdy run-on ramp designed to facilitate safe and reliable access to industrial weighing platforms in production and workshop environments Powder-coated steel construction Fits weighing platforms 1000×1000×108 mm Robust 45 kg base weight for stability Designed for KERN scale platforms Built for consistent, measurable performance Constructed from powder-coated steel, this run-on ramp prioritises durability and low maintenance in demanding environments. The solid finish provides corrosion resistance, reducing the need for frequent touch-ups and extending service life compared with untreated alternatives. By offering a rigid approach surface and a comparatively high mass, the ramp improves stability during transfer and weighing processes, which supports repeatable measurement results and minimises rework. Integrates with weighing workflows to save time Engineered as an accessory for industrial scales, the ramp permits smoother transitions of trolleys or pallets onto the weighing surface, cutting loading time and lowering the risk of misalignment. Compatibility with KERN platform systems ensures straightforward placement and consistent positioning, which helps to reduce operator corrections and maintain throughput. The practical result is a more efficient weighing routine and fewer interruptions to production flow. Practical design for everyday workshop use The functional design focuses on reliability rather than complexity: a robust metal construction delivers predictable behaviour under routine use, while the surface treatment keeps cleaning and upkeep simple. The ramp’s weight contributes to a secure, non-shifting base during operations, helping to protect both the scale and handled goods. For workshops seeking to standardise equipment, this accessory supports safer handling and clearer procedural outcomes without the need for specialised training. For precise compatibility checks or to arrange a supply of the KERN BIC-A01, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; specialist advice and prompt order handling are available from our team. Technical Data Article number: BIC-A01 Manufacturer: KERN GTIN: 4045761193239 Country of origin: CN Material: Powder-coated steel Weight: 45 kg Customs tariff number: 73269098 Facts ECLASS: 22108608 SKU: BIC-A01 Weight (kg): 45 GTIN: 4045761193239 Origin: China Special features Suitable for models with weighing platform size 1000x1000x108mm Non-standard production note: nicht serienmäßig Powder-coated finish Accessory for scales / ramp for weighing platforms FAQ Is the ramp compatible with KERN weighing platforms? The ramp is designed for use with KERN scale platforms and aligns with models specified for the corresponding platform size, simplifying integration into existing weighing setups. What material is the ramp made from and how durable is it? Constructed from powder-coated steel, the ramp offers robust corrosion resistance and durability suitable for regular workshop use with KERN accessories. How heavy is the ramp and why does that matter? At 45 kg, the ramp provides a stable base that reduces movement during loading, which helps to maintain repeatable weighing results when used with a compatible platform. Can the ramp be used in wet or humid environments? The powder-coated surface enhances protection against moisture and general workshop contaminants, making it more resilient than untreated metal in typical industrial conditions. Is the ramp supplied ready to use, or does it require assembly? The ramp is supplied as a ready-made accessory for weighing platforms; specific installation or placement instructions should be followed to ensure correct alignment with the scale. Manufacturer: KERN — Address: not provided — Contact: not provided

Take advantage of a combination of powder‑coated steel construction and a design made specifically for flush installation to secure long‑term reliability and simple, barrier‑free access to floor scales; order the frame directly via Metav Werkzeuge or ask our consultants for tailored assistance. Pit frame BIC-A04 by KERN — powder‑coated steel support for floor scales The Pit frame BIC-A04 is a recessed support frame intended for the installation of weighbridges, enabling barrier‑free access and flush mounting of floor scales. Powder‑coated steel construction Designed for 1 m square weighplates Robust support for flush‑mounted scales Quick installation for barrier‑free access Built for durable, flush installation The frame is made from powder‑coated steel, which provides corrosion resistance and a durable surface finish suitable for workshop environments. Its geometry is optimised to accept a standard square weighplate, allowing the scale to sit flush with the floor for barrier‑free access. The solid construction reduces movement and deformation during loading, translating technical stability into consistent weighing results and fewer installation adjustments over time. Practical benefits for workshop and industrial use By offering a recessed mounting solution, this support frame simplifies access to floor scales and helps prevent trip hazards or ramps in the working area. The robust support provided by the frame contributes to precise weighing by keeping the weighplate aligned and stable, reducing the risk of tare shifts. For production areas and goods receiving bays, the resulting ease of loading and unloading accelerates throughput and reduces manual handling effort, delivering a measurable improvement in daily operational efficiency. Designed for straightforward installation and serviceability The construction allows for straightforward placement and fixing of the weighbridge without complex civil works. Once installed, the frame permits regular inspection around the weighplate and access for maintenance without dismantling surrounding floor sections. Clear compatibility with standard weighplate dimensions means planning and replacement are simpler, while the cleaner installation facilitates routine cleaning and prevents debris accumulation that can affect measurement accuracy. For assistance selecting the right recessed frame or to arrange supply of the KERN pit frame, contact Metav Werkzeuge in Emmerich for expert advice and direct ordering support. Technical data Article number: BIC-A04 SKU: BIC-A04 Manufacturer: KERN GTIN: 4045761193260 Origin: CN Customs tariff no.: 84239010 ECLASS: 35011090 Dimensions & weight Compatible weighplate size: 1000×1000×108 mm Weight: 30 kg Materials & features Material: Steel, powder‑coated Application: Recessed installation for floor scales Product group: Pit frames / scale accessories Category: Accessories for scales FAQ Is the frame suitable for flush mounting of floor scales? The KERN pit frame BIC-A04 is designed for recessed installation and supports flush mounting of a standard square weighplate. What material and finish does the frame have? The frame is manufactured from steel with a powder‑coated finish to improve durability and resistance to workshop conditions. Which weighplate dimensions are compatible with the frame? Compatibility is specified as weighplates sized 1000×1000×108 mm for the BIC-A04 model. Can the frame be used outdoors? The powder‑coated steel provides protection against corrosion, but outdoor use should consider site‑specific exposure and any required additional surface protection. How heavy is the support frame for handling and installation? The support frame weighs 30 kg, which informs handling and installation planning for the BIC-A04. KERN — Origin: China — Distributor contact: Metav Werkzeuge, Emmerich | Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930

Take advantage of reliable floor anchoring and compact design to improve weighing stability; the pair of foot plates provides secure fixation for a weighing bridge while keeping installation quick and unobtrusive. Order through Metav Werkzeuge or consult our advisors for application advice and fast supply. BIC-A07 Foot Plate Pair – Floor fixing for weighing bridge by KERN The BIC-A07 is a pair of foot plates designed to secure a weighing bridge to the floor, intended for use in industrial metrology and workshop scale installations. Secure floor anchoring for weighing bridge Durable pair for industrial scale installations Rapid, straightforward installation on-site Compact design with low weight 0.75 kg Stabilise measurements with dedicated floor anchoring A weighing bridge needs a steady foundation to deliver consistent results; the BIC-A07 foot plates provide exactly that. By securing the load cell structure to the floor, these mounting plates reduce lateral movement and vibration that can cause measurement drift. The direct consequence is improved repeatability of readings and fewer recalibrations, which translates into measurable time savings during routine quality checks. The design focuses on reliable fixation rather than decorative elements, so the practical benefit is clear: better measurement stability for industrial scales and test benches. Save assembly time with a compact, practical mounting solution Installation routines are often a bottleneck in workshop set-ups. The foot plates have been conceived for quick integration with existing weighbridge frames, enabling technicians to achieve firm anchorage without extended on-site modification. The compact footprint and low mass (0.75 kg) make handling and positioning straightforward during installation phases. For operations that require short downtimes and predictable set-up times, this results in lower labour overheads and fewer interruptions to production workflows. The simple mechanical function—anchoring the weighing bridge to the floor—means less specialist tooling is required and commissioning is faster. Choose KERN components through a dependable partner Selecting accessories from a recognised manufacturer brings compatibility and traceability. These foot plates are supplied under the KERN brand and are categorised within scale accessories, which simplifies inventory and spare-part management for calibration labs and maintenance teams. Procuring the plates via Metav Werkzeuge connects that brand reliability with a broad supply chain: Metav’s Emmerich hub acts as a quality filter for the European market, supporting consistent availability and transparent fulfilment. For procurement managers seeking to consolidate suppliers while maintaining metrology-grade performance, this combination supports a robust supply strategy. Request a suitability check or a tailored quote for the KERN BIC-A07 from Metav Werkzeuge – contact: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 — our consultants will advise on compatibility and delivery Technical data Article number: BIC-A07 Manufacturer: KERN SKU: BIC-A07 GTIN: 4045761193291 Country of origin: CN Tariff number: 84239010 Facts Weight: 0.75 kg ECLASS: 21130190 Special features Pair of foot plates for floor fixation of a weighing bridge Category: scale accessories (Waagen Zubehör) Intended use: secure anchoring of weighing bridge assemblies FAQ What is the primary purpose of these foot plates? The foot plates are intended to fix a weighing bridge to the floor, providing stable floor anchoring and improved measurement repeatability for scale installations. Are these plates compatible with different weighing bridges? Compatibility depends on the bridge frame design; the BIC-A07 is a standard accessory for scale assemblies and is typically suitable where floor fixation points match the plate mounting geometry. How much do the plates weigh? The pair has a combined weight reference of 0.75 kg, which supports easy handling during installation. Who manufactures the foot plates and where are they produced? These foot plates are manufactured by KERN and are listed with origin country CN and GTIN 4045761193291. Can these plates improve weighing accuracy? By reducing movement and vibration of the weighing bridge, the plates contribute to greater stability and can lower the frequency of recalibration, improving operational reliability. Manufacturer: KERN · Country of origin: CN · GTIN: 4045761193291

Take advantage of secure, audit-ready storage and rapid USB export to streamline documentation of weighing results; the compact design and KERN quality support reliable data capture and simple archiving. Order the module via Metav Werkzeuge or consult our advisers for compatibility and delivery from Emmerich. KIB-A01 Alibi Data Logger — alibi memory with USB export for weighing results (KERN) The KIB-A01 Alibi Data Logger is a compact accessory designed to store and export recorded weighing results via a built-in USB interface, suited to industrial and laboratory weighing applications Secure storage of weighing results USB export to external storage Compact 0.1 kg module KERN quality for industrial use Reliable, audit-ready recording that supports traceability The alibi memory module provides a secure record of weighing operations, ensuring clear traceability for quality management and compliance workflows. Built to preserve entries in a tamper-evident format, the logger reduces manual documentation errors and supports a verifiable chain of measurement custody. This means fewer disputes during audits and a transparent archive of measured values, all stored locally and ready for export. Fast export and uncomplicated archiving for efficient workflows Equipped with a dedicated USB interface, the device offers straightforward export of saved weighing results to external media for rapid archiving, evaluation or integration into production documentation. The direct data transfer capability speeds up administration, cuts transcription time and helps maintain consistent records across shifts. Integrating the module into existing data-handling procedures simplifies reporting and frees technical staff for higher-value tasks. Compact, robust accessory made for scale environments Designed as an accessory for weighing systems, the module combines a small footprint with dependable operation; its 0.1 kg weight facilitates discreet installation without affecting scale setup. Manufactured by KERN, the unit follows industrial accessory standards and is identified by GTIN 4045761198722, making it straightforward to reference in procurement and inventory systems. The compact form factor supports flexible placement in workshops and laboratory benches while maintaining professional data integrity. For audit-ready weighing documentation with the KERN KIB-A01, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KIB-A01 Manufacturer: KERN GTIN: 4045761198722 Origin: CN Category: Waagen > Zubehör Numbers / Core technical data Weight: 0.1 kg Tariff number: 84238220 eCl@ss: 19150490 Special features Alibi memory for secure storage of weighing results USB interface for export to external storage Accessory for weighing systems (Zubehör) SKU: KIB-A01 FAQ What is the primary function of the KIB-A01? The KIB-A01 is an alibi memory module that securely stores recorded weighing results and enables export via its USB interface for archiving and audit purposes. How are saved weighing results exported? Saved entries are exported from the logger via the integrated USB interface to external storage devices for documentation, analysis or import into reporting systems. Is the module suitable for regulatory audits? Yes, the alibi memory provides audit-ready records that support traceability and documentation requirements for quality management and compliance checks. What are the physical characteristics of the device? The module is compact and lightweight, with a specified weight of 0.1 kg, intended as an unobtrusive accessory for scale installations. Who manufactures the alibi memory and how is it identified? The device is manufactured by KERN and identified by GTIN 4045761198722 and SKU KIB-A01 for procurement and inventory reference. KERN · Origin: China · Address and direct manufacturer contact not specified

Take advantage of a stable, lightweight floor stand that elevates the indicator to an ergonomic 1000 mm working height while remaining retrofittable for existing systems; order the KERN EOB-A02B directly via Metav Werkzeuge or consult our advisers for application-specific guidance. KERN EOB-A02B floor stand — 1000 mm height, retrofittable The KERN EOB-A02B is a floor stand designed to raise the weighing indicator to an ergonomic working height, ideal as an accessory for laboratory and workshop scales. Raises indicator to approx. 1000 mm height Retrofit-ready for existing indicator units Lightweight for quick installation — 2.65 kg Designed as accessory for weighing systems Raise indicator visibility and reduce handling errors A dedicated floor stand that positions the indicator at 1000 mm delivers tangible workflow benefits: improved line of sight, fewer posture-related interruptions and quicker data entry. Fitting the indicator at an elevated level reduces the need to bend or lift displays during repetitive weighing tasks, which supports faster cycles and fewer accidental knocks. The stand is presented as a practical ergonomic improvement for production benches and quality-control stations. Fast integration with existing weighing equipment Designed to be retrofittable, the stand enables the retro‑installation of an indicator without replacing the base scale, cutting downtime and spare-part complexity. With a lightweight assembly of 2.65 kg, handling and mounting are straightforward, which shortens installation times and keeps disruption to a minimum. This practical compatibility helps preserve existing investments in weighing electronics while upgrading usability at the bench. Practical design for workshop and industrial use As an accessory from KERN, the unit focuses on a compact footprint and reliable positioning for everyday operation in busy environments. The simple upright configuration secures the indicator at working height, improving ergonomics and operational clarity for operators. The accessory nature of the product makes it suitable wherever indicator visibility and repeatable measurement workflows are priorities, from workshops to inspection areas. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN EOB-A02B into your weighing setup — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number / SKU: EOB-A02B Manufacturer: KERN GTIN: 4045761192171 Origin country: CN Core specifications Height: approx. 1000 mm Weight: 2.65 kg Tariff number: 73269098 ECLASS: 21170601 Special features Retrofit-capable (nachrüstbar) Accessory for weighing indicator units Product category: Accessories for scales Product group: Stands / tripods FAQ Is the stand compatible with different indicator models? The KERN EOB-A02B is designed as an accessory for weighing systems and can be retrofitted to many indicator units; compatibility depends on the indicator's mounting interface and bracket dimensions. What is the total height of the stand? The floor stand offers an overall working height of approximately 1000 mm to position the indicator at an ergonomic level. How heavy is the KERN EOB-A02B and is it easy to install? The stand weighs 2.65 kg and is intentionally lightweight to enable quick mounting and repositioning with minimal effort. Can the stand be retrofitted to existing equipment? Yes — the EOB-A02B is retrofittable (nachrüstbar) so it can be added to existing setups without replacing the base scale. Where is the product manufactured? The KERN EOB-A02B is listed with origin country CN. KERN — distributed via Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Take advantage of a reliable RS-232 connection and a practical ~1.5 m cable length to ensure precise, uninterrupted data transfer between weighing instruments and PC systems; order the cable directly via Metav Werkzeuge or consult our specialists for compatibility advice. EOC-A12 Interface Cable — RS-232 connection, approx. 1.5 m (KERN) EOC-A12 Interface Cable is a dedicated RS-232 lead for integrating weighing equipment with data acquisition systems and control terminals in workshop and laboratory settings. RS-232 interface compatible Approx. 1.5 m cable length Suitable for weighing equipment Manufacturer: KERN Reliable connectivity for measurement workflows The RS-232 standard provides a stable, proven method for sending numerical measurement results from instruments to computers and printers; this connection reduces the risk of data loss during transfer and supports established serial communication protocols. Designed by KERN, the cable ensures reliable data transfer for metrology and industrial weighing applications, which helps maintain traceable records and simplifies quality control procedures. By choosing a serial interface lead, latency and compatibility issues common with improvised adapters are avoided. Simple setup that fits existing installations A cable of approx. 1.5 m balances freedom of movement and tidy installation, allowing scales and terminal units to be positioned conveniently without extra extensions. The lead is engineered for plug-and-play integration with standard serial ports used on many weighing instruments, reducing setup time and limiting the need for specialist configuration. For facilities replacing older leads, the modest length helps avoid signal degradation while enabling organised cable routing within cabinets or across workbenches. Durable design and wide equipment compatibility Constructed for routine workshop use, the connection cable combines a compact form with handling resilience appropriate for industrial environments. Its mass and construction provide stable handling during regular connection cycles and maintenance. Compatibility with weighing accessories and related scale interfaces makes this lead a practical spare part for service departments and production lines that rely on consistent measurement transfer. For procurement or technical confirmation of compatibility with specific weighing models, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 to secure the KERN RS-232 EOC-A12 cable with immediate dispatch advice Technical data SKU: EOC-A12 Manufacturer: KERN GTIN: 4045761198463 Origin: CN Commodity code: 84239010 Core specifications Weight: 0.38 kg Cable length: approx. 1.5 m eClass: 19050112 Features Interface: RS-232 Application: accessories for scales / weighing equipment Segment: Accessories, product category: Scales, product group: Cable FAQ What interface standard does the cable use? The EOC-A12 interface cable uses the RS-232 serial standard for direct instrument-to-PC communication, supplied by KERN. Is the cable suitable for industrial weighing systems? Yes, the KERN EOC-A12 connection cable is specified for use with scales and weighing equipment and is commonly employed in industrial metrology environments. What is the length of the connection lead? The connection lead measures approximately 1.5 m, providing practical reach for most bench and floor-mounted setups. Can the cable be used with older serial ports? The EOC-A12 is compatible with standard RS-232 serial ports, making it suitable for legacy interfaces often found on older instruments. How heavy is the cable and is it robust enough for workshop use? The cable has a listed weight of 0.38 kg and is designed for routine workshop handling and reliable reconnection cycles. KERN — Origin: CN — GTIN: 4045761198463

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271