Precision boring heads and taper adaptors for accurate large-diameter holes
Precision boring heads and taper adaptors enable machining of highly accurate, round bores on milling machines and deliver tight fits for assembly and tooling. These systems are used to produce large-diameter, close-tolerance holes by combining robust boring heads, matched taper adaptors and appropriate boring bars, allowing operators to achieve repeatable concentricity and surface finish. Ideal for metalworking applications where hole accuracy and fit are critical, they reduce rework and improve assembly reliability by providing controlled material removal and straightforward tool setup.
150mm Face And Boring Head Set BT-50 With Collet Range Ø10–Ø110mm, Set - Vertex
A compact facing and boring head set that pairs the BT-50 taper interface with a wide clamping range (Ø10–Ø110 mm) for robust shop-floor performance; benefits include higher rigidity and reproducible results. Order the set directly via Metav Werkzeuge or consult the Metav team for application guidance. Vertex VBHC Facing and Boring Head Set (BT-50, Ø10–Ø110 mm) The VBHC Facing and Boring Head Set is a precision tooling set for facing and internal/external boring, designed for mounting on BT-50 taper spindles in machine shops and toolrooms BT-50 taper collet interface Clamping range Ø10–Ø110 mm Complete facing and boring head set Robust 5.65 kg assembly weight Engineered for consistent facing and boring performance The set combines a BT-50 interface with a design focused on rigidity and repeatability, enabling stable machining of face and bore operations. The modular construction reduces run-out and vibration, which improves surface finish and extends cutter life. With a focus on reproducible centreline alignment, the tooling delivers measurable improvements in cycle stability and process control for production and repair work. Adaptable clamping for diverse diameters and straightforward set-up With a clamping capacity of Ø10–Ø110 mm, the set covers a broad range of shaft and bore sizes, reducing the need for multiple specialised tools. The use of a standard collet system simplifies changeovers and maintains concentricity across diameters, so calibration and measurement remain efficient. The complete set layout groups essential components for faster set-up and predictable machining times in mixed-production environments. Durability, serviceability and seamless shop-floor integration The assembly weight of 5.65 kg reflects a solid build that resists deflection under load while remaining manageable for routine handling. Components are designed for straightforward maintenance and replacement, supporting long-term precision and low downtime. As a Vertex solution, the head set integrates readily with established tooling registers and machining centres, helping to standardise processes and safeguard part quality across shifts. Secure the rigid BT-50 facing and boring solution from Vertex through Metav Werkzeuge — contact Metav Werkzeuge for tailored configuration and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: VBHC-BT50-BC2 GTIN: 4061905091308 ECLASS: 21041590 Brand: Vertex Facts Weight: 5.65 kg Clamping range: Ø10–Ø110 mm Set: yes Special features Collet type: BT-50 Designation: Facing and boring head set FAQ What diameters can be machined with this head set? The VBHC Facing and Boring Head Set supports diameters from Ø10–Ø110 mm, covering common shaft and bore sizes for general engineering work. Which spindle taper does the set require? The set is designed for a BT-50 taper interface; the VBHC-BT50-BC2 fits machines equipped with a BT-50 tool holder. Is the VBHC set suitable for high-precision finishing? Yes, the assembly emphasises rigidity and low run-out to support finishing operations where repeatable concentricity is required. Does the set include collets and mounting components? The product is supplied as a complete facing and boring set; specific collet sizes and included parts are listed with the SKU VBHC-BT50-BC2 in the product datasheet. How heavy is the assembly for handling and mounting considerations? The complete assembly weighs 5.65 kg, balancing robustness with practical handling for workshop personnel. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Boring Head Set MT-4, M16x2.0P Thread - Vertex
Take advantage of a high-stability solution for internal machining: a precision boring head set with an MT-4 collet taper and an M16x2.0 threaded mounting that helps keep setup time low and bore quality consistent. Order directly via Metav Werkzeuge or consult their specialists for application guidance. VBH2084 – Precision boring head set with MT-4 taper and M16x2.0 thread (Vertex) The VBH2084 is a precision boring head set designed for fine internal diameter finishing in workshop and CNC environments, offering rigid construction and standardised mounting for repeatable results. Precision boring geometry for tight tolerances MT-4 taper compatibility for standard tooling M16x2.0 threaded mounting for secure attachment Robust 7 kg kit suited to workshop use Achieve consistent internal accuracy with reliable machining geometry The VBH2084 is engineered as a precision boring head set to deliver consistent bore quality where dimensional control matters. The combination of a rigid construction and a standardised MT-4 taper provides stability during machining, reducing deflection and helping to maintain concentricity. With an M16x2.0 threaded mounting, the head secures reliably to common adaptors and spindles, enabling predictable tool behaviour. This configuration reduces rework and supports adherence to tight tolerance chains by converting cutting forces into stable, repeatable adjustments. Faster setup and adaptable integration for workshop and CNC use Designed for compatibility with common tooling systems, the set accepts standard collets and adapter interfaces, simplifying changeovers and minimising downtime. The MT-4 interface and M16x2.0 thread permit quick integration into lathes, spindles and boring bars without custom fixturing, which supports lean production flows. High repeatability in axial position and cutting alignment improves throughput by shortening inspection intervals and lowering scrap rates. Where cycle times and process reliability are key, this modular approach to internal tooling helps keep operations efficient. Durable design and predictable performance for production environments The kit’s substantial construction contributes to vibration dampening and sustained cutting stability, supporting consistent surface finish and bore roundness across runs. Maintenance is straightforward: precision adjustment mechanisms are accessible for fine tuning, while the standardised interfaces make replacement parts widely available. Backed by Vertex’s engineering pedigree, the set is suitable for toolrooms, small-batch production and integration into CNC cell tooling packages. For complex materials or specialised applications, technical data and compatibility checks are available from Metav Werkzeuge to ensure the tooling choice matches the machining task. For advice on integration or to request tailored application support, contact Metav Werkzeuge — Metav’s specialists can confirm suitability for specific machines and processes and arrange fast supply from their Emmerich facility. Technical Data Article number: VBH2084-MT4 GTIN: 4061905088957 Model: VBH2084 Facts Weight: 7 kg Thread: M16x2,0P ECLASS: 21041590 Special features Collet type MT-4 Category: Vertex SKU: VBH2084-MT4 FAQ What applications suit this boring head set best? The VBH2084 precision boring head set is intended for internal finishing and diameter correction in toolroom and CNC environments, where stable cutting conditions and repeatable accuracy are required. Which taper and mounting does the set use? The set uses an MT-4 taper interface and an M16x2.0 threaded mounting to secure the head to common adaptors and spindles. Is the VBH2084 compatible with standard collets? Yes, the VBH2084 accepts standard collet fittings associated with its MT-4 configuration, enabling straightforward replacement of toolholders and collets. How does the design improve repeatability? The rigid construction and standardised mounting reduce deflection and runout, so the VBH2084 maintains positional stability and consistent bore geometry across production runs. Can the set be used on automated CNC cells? The set’s standardised interfaces and robust build make it suitable for integration into CNC cells and automated workflows where secure mounting and repeatable performance are essential. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Boring Head Set VBH620 NT-40 - Vertex
Take advantage of the combination of precision fine adjustment, NT-40 collet compatibility and secure M16x2.0P mounting for stable internal machining; order the VBH620-NT40 directly via Metav Werkzeuge or consult the specialists for configuration advice. VBH620-NT40 Precision boring head set with NT-40 collet — Vertex The VBH620-NT40 is a precision boring head set designed for fine internal machining in CNC and toolroom environments, optimised for repeatable adjustments and secure NT-40 collet mounting. NT-40 collet compatibility Precision fine-adjustment mechanism Robust 6.5 kg construction Thread M16x2.0P for secure mounting Accurate hole-making that reduces rework and cycle time The set delivers precision through a calibrated fine-adjustment mechanism that converts minute index changes into controlled cutting-depth variation. This enables measurable improvements in tolerances and surface finish when producing internal bores or reworking fitted housings. The integration of a true NT-40 collet system provides stable clamping of cutting tools, reducing runout and resulting in fewer scrapped parts and less time spent on secondary operations. Such gains translate directly into productivity advantages on small- to medium-batch production runs. Engineered rigidity for consistent repeatability Built with a focus on rigidity, the assembly benefits from a substantial mass and compact geometry that stabilise the tool during cutting. The specified weight of 6.5 kg contributes to vibration damping, while the standard M16x2.0P thread ensures a secure mechanical interface to adaptors or toolholders. Together these characteristics promote steady cutting conditions and consistent results across shifts, which is particularly valuable in precision metalworking where repeatability defines overall process quality. Smooth integration into existing tooling systems and workflows Compatibility with the NT-40 collet family simplifies integration into established CNC toolchains and reduces changeover time between operations. The modular nature of the set supports straightforward tool replacement and adjustment without extensive recalibration, providing practical convenience on the shop floor. Alongside technical benefits, the set aligns with Metav’s supply philosophy: accessible, dependable tooling backed by a European quality filter and stocked for reliable delivery to industrial and craft customers. Contact Metav Werkzeuge for tailored tooling configurations and stock availability — our specialists can advise on Vertex VBH620-NT40 setup and delivery options Technical data SKU: VBH620-NT40 GTIN: 4061905083426 Brand: Vertex Model: VBH620 Numbers / Core technical data Weight: 6.5 kg Thread: M16x2.0P eCl@ss: 21041590 Designs / Special features Product type: Precision boring head set Collet system: NT-40 Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ba/2f/97/63/63972fbac806fb82109e3554/vbh620-nt40-main.jpg FAQ What tooling system does this set use? The Vertex VBH620-NT40 uses the NT-40 collet system for secure tool clamping and reduced runout. How is the boring head mounted? Mounting is via a standard M16x2.0P thread to ensure a firm mechanical connection to adaptors or holder interfaces. What contributes to the set’s stability during cutting? A compact design and the 6.5 kg mass provide enhanced vibration damping, improving surface finish and repeatability. Is this set suitable for CNC applications? Yes, the unit is designed for integration into CNC toolchains where repeatable fine adjustment and NT-40 compatibility are required. What benefits does fine adjustment bring to machining? Fine adjustment enables precise depth control, reducing the need for rework and helping to maintain consistent bore diameters across batches. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
5.9kg Planing and Boring Head Set VBH, MT-3 Shank - Vertex
Take advantage of the combination of precise face and boring capability, secure MT‑3 collet compatibility, and a stable M12x1.75P threaded connection for reliable workshop performance. Order the VBH-102 directly via Metav Werkzeuge or contact our consultants for application guidance. VBH-102 – Vertex face and boring head set, MT‑3 taper, M12x1.75P thread The VBH-102 is a face and boring head set designed for precision machining tasks in toolrooms and small workshop CNC applications. Precise face and boring head functionality MT‑3 collet taper compatibility M12x1.75P threaded connection for stability Improved accuracy for finishing and bore alignment The set is designed to deliver consistent surface finish and true bores by combining rigid mounting and precise adjustment. Equipped to accept an MT‑3 collet, the unit ensures axial stability and reduced vibration during cuts, which directly improves concentricity and repeatability. For practical terms: a properly seated taper and the M12x1.75P threaded connection limit play between the head and the spindle, resulting in fewer reworks and a more predictable production flow. Compatibility and workshop efficiency Built as a compact solution for varied machining tasks, the head set supports standard Morse taper tooling and can be integrated quickly where an MT‑3 interface is accepted. The comparatively substantial mass (approx. 5.9 kg) contributes to dampening chatter while cutting, shortening cycle times through fewer tool changes and reduced scrap. These operational benefits translate into measurable savings in time and resources for small-batch and prototype work. Practical operation and upkeep for long-term reliability The unit functions as a conventional face and boring head: the collet secures the cutting tool while the head allows controlled radial adjustment for precise bore enlargement and facing. Routine checks of taper seating and thread engagement reduce runout; lubrication of moving parts and periodic inspection of the collet tension maintain axial accuracy. The construction supports regular workshop maintenance practices, extending service life and ensuring continued machining precision. Discuss the VBH-102 with Metav Werkzeuge for tailored machining advice and reliable delivery from Emmerich — Tel +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: VBH-102 GTIN: 4061905083433 Brand: Vertex Facts Weight: 5.9 kg Thread: M12x1.75P Eclass: 21041590 Special features Designation: Face and boring head set Collet type: MT‑3 Series: VBH FAQ What taper does the VBH-102 use? The VBH-102 uses an MT‑3 collet taper, which is a common Morse taper standard for securing tooling. What threaded connection is required for mounting? Mounting requires an M12x1.75P threaded connection as specified for the head interface. How much does the set weigh? The complete unit has a weight of approximately 5.9 kg, contributing to stability during cutting. What machining tasks suit this head set? This face and boring head set is suitable for precision facing and bore finishing where a Morse taper toolholding and fine radial adjustment are required. How can runout be minimised when using the head set? Ensure secure seating of the MT‑3 collet, correct tightening of the M12x1.75P thread and regular inspection of the taper and collet for wear to maintain low runout. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Automatische Universal-Plan- und Ausdrehköpfe VBHU
Technische Daten: Bezeichnung: Universal-Plan- und Ausdrehköpfe Vollhartmetall Geeignet für: Ø5-Ø250mm und Ø110mm für Vertikalbohrungen Gewicht: 4,5 kg bis 9,7 kg Gewinde: M12x1,5P bis M24x3,0P Spannzangen Typ: BT-50 bis Sk-50 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
BT-40 Boring and Facing Head Set M16x2.0P, Weight 7.1 kg - Vertex
Combining a BT-40 spindle interface with an M16x2.0P mounting thread and a sturdy 7.1 kg construction, this face and boring head set delivers stable, repeatable machining for precision facing and boring operations. Order the VBH-109 face and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBH-109 Face and Boring Head Set — BT-40 interface, M16x2.0P thread (Vertex) The VBH-109 is a compact face and boring head set designed for precision machining on BT-40-equipped machines, offering stable mounting via an M16x2.0P thread. BT-40 spindle interface M16x2.0P mounting thread Robust 7.1 kg construction Stability and repeatable results through rigid design A machining head's capacity to hold position under load is crucial for dimensional accuracy. The combination of a BT-40 interface and a substantial mass of 7.1 kg reduces vibration and improves cutting stability, which directly benefits repeatability and surface finish. In practical terms, this means fewer compensating passes and less downstream rework. The robust mechanical behaviour of the assembly helps preserve tool geometry and extends the useful life of both cutters and holders, delivering measurable improvements in process reliability. Faster set-up and reliable mounting for production environments A clearly specified mounting system simplifies fixture planning and changeover. The M16x2.0P mounting thread ensures a defined mechanical connection between arbor and head, reducing the need for trial fittings and adjustments. Where rapid machine turnaround is required, the head's standardised interface and collet type support predictable installation times and consistent alignment. These characteristics make the set suitable for batch production as well as single-part operations where quick, accurate set-up reduces cycle time and increases throughput. Quality machining outcomes and consistent bore control Manufactured under the Vertex name, the VBH-109 focuses on the essential requirements of facing and boring: stability, alignment and repeatability. The design aims to translate spindle motion into precise, controllable cutting action so that bore diameters and facing planes remain within narrow tolerances. For shops seeking dependable process results, this head set offers a practical mix of rigidity and compatibility, supporting quality assurance routines and repeatable part inspection outcomes. For BT‑40 applications, contact Metav Werkzeuge in Emmerich to discuss compatibility and procurement of the Vertex VBH‑109 face and boring head set and to obtain application-oriented advice from our specialists Technical Data Article number: VBH-109 Manufacturer: Vertex GTIN: 4061905091261 Facts Weight: 7.1 kg Thread: M16x2.0P ECLASS: 21041590 Special features Interface: BT-40 Application: face and boring operations Brand: Vertex FAQ Is the VBH-109 compatible with BT-40 spindles? Yes. The VBH-109 face and boring head set from Vertex is specified for use with a BT-40 interface and will mount to machines that accept BT-40 tooling. What operations is this head set intended for? The set is intended for precision facing and boring operations; the VBH-109 from Vertex is configured to support stable, repeatable machining for those tasks. What is the mounting thread and why is it important? The M16x2.0P mounting thread secures the head to the arbor and contributes to overall rigidity; this defined connection supports consistent alignment and improves cutting stability. How does the weight affect machining performance? At 7.1 kg, the mass of the assembly helps dampen vibration and stabilise the cutting interface, which supports improved surface finish and dimensional consistency. Can the VBH-109 maintain repeatable bore diameters? Yes. The Vertex VBH-109 face and boring head set is designed to provide repeatable results through its rigid mounting and stable construction, aiding consistent bore control across production runs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
BT-50 Precision Boring Head Set M24x3.0P, Tool Holder VBH2084 - Vertex
Take advantage of the combination of high rigidity, precise fine adjustment and a standard BT-50 interface to maintain consistent bore quality and minimise setup time. Order the VBH2084 precision boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBH2084 Precision boring head set — BT-50 interface, M24x3.0P adjustment, Vertex The VBH2084 is a precision boring head set for fine internal finishing and accurate bore diameter control in CNC turning and milling applications using a BT-50 toolholder. High-rigidity BT-50 interface Fine M24x3.0P adjustment thread Stable, workshop-ready construction Compact system for precision internal finishing Consistent precision for demanding internal bores The VBH2084 delivers measurable improvements in bore accuracy thanks to its focus on precision and repeatability. Designed as a precision boring head set, the tool converts micro-adjustments into reliable changes at the cutting edge, reducing guesswork during set-up. The combination of a rigid interface and calibrated thread control ensures each pass maintains tight tolerances, supporting processes where dimensional conformity is critical. For operators and engineers, this translates into fewer reworks and more predictable production outcomes. Faster set-up and repeatable adjustment reduce cycle time Integration with a BT-50 toolholder and the M24x3.0P adjustment thread makes the system straightforward to mount and adjust. The BT-50 connection provides a high-stability coupling to the spindle or turret, while the fine-pitch M24x3.0P leadscrew allows controlled radial changes in micrometres. This combination shortens set-up and adjustment phases, helping to lower non-productive time and to increase throughput on batch runs where multiple bore sizes are required. The design supports consistent indexing and repeatable positioning between tool changes. Robust construction for stable machining and workshop integration Weighing in at 10.4 kg, the assembly is engineered for mechanical stability and vibration damping during heavy cuts or interrupted machining. Solid construction and balanced mass contribute to stability at the cutting interface, which in turn prolongs cutter life and improves surface finish. The system is suitable for integration into standard BT-50-equipped CNC lathes and milling stations and is compatible with common workshop toolholding practices, enabling straightforward incorporation into existing production lines without special adaptations. Contact Metav Werkzeuge in Emmerich for a tailored consultation on the VBH2084 precision boring head set — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VBH2084-BT50 GTIN: 4061905096211 Manufacturer: Vertex Facts Weight: 10.4 kg Thread: M24x3.0P Collet / interface type: BT-50 eCl@ss: 21041590 Special features Precision boring head set configuration Designed for internal finishing and bore adjustment Vertex brand FAQ What interface does the set use? The VBH2084 precision boring head set uses a BT-50 interface for mounting to compatible spindles and turrets. How is adjustment achieved on the boring head? Adjustment is effected via an M24x3.0P fine-pitch thread that converts rotary input into precise radial movement for bore correction. What is the unit weight and why does it matter? The assembly weighs 10.4 kg; this mass contributes to mechanical stability and improved vibration damping during machining. Is the VBH2084 suitable for CNC turning centres? Yes. The set is intended for integration with CNC machines that accept BT-50 toolholders and is optimised for internal finishing tasks. Which manufacturer produces this tool? The tooling is produced by Vertex and supplied in this configuration as the VBH2084-BT50. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
BT30 Taper C-Type Tool Holder, VBC Shank - Vertex
Take advantage of the combination of BT30 compatibility, a C-type taper for improved concentricity and a robust 1.1 kg construction for stable toolholding. Order the component directly via Metav Werkzeuge or ask their consultants for integration and compatibility guidance. VBC-BT30 BT30 C-type taper — Vertex toolholder, 1.1 kg A VBC-BT30 taper designed for reliable BT30 spindle mounting, intended for secure clamping in CNC machining and toolholding assemblies BT30 spindle interface for standardised mounting C-type taper for reliable concentricity Solid build at 1.1 kg for stable operation Manufactured by Vertex with consistent quality Precision mounting for consistent machining results The BT30 spindle interface combined with a C-type taper offers a predictable mechanical fit that reduces radial runout and supports repeatable tool alignment. This mechanical pairing improves concentricity, which directly influences dimensional accuracy and surface finish during turning and milling operations. When integrated into a machine spindle, the taper's geometry ensures secure seating and even load transfer, so the machining process benefits from reduced vibration and predictable tool life. The design intent is compatibility with standard BT30 toolholding systems, enabling straightforward replacement or upgrade of existing holders without reworking the spindle interface. Mass and rigidity that improve stability and surface quality With a recorded mass of 1.1 kg, the component provides measurable inertial damping compared with lighter holders, which assists in absorbing cutting forces and dampening chatter. Increased mass, when matched with correct clamping practice, contributes to improved stability and a finer surface finish on workpieces. Rigidity in the clamping zone minimises deflection under load; this translates into fewer rework cycles and enhanced process reliability. For users focusing on consistent production output, the combination of a robust build and standardised taper geometry supports predictable tool behaviour across repetitive batches. Proven manufacturing and straightforward integration into workshops Produced by Vertex, the component benefits from established machining and quality control processes, offering traceability via the SKU and GTIN. This provenance supports procurement and inventory management in professional workshops and industrial settings, helping to maintain supply chain consistency. The straightforward interface and established form factor ease incorporation into existing tool sets, reducing setup time and simplifying spare-part strategies. Where detailed machining parameters are required, the standardised design enables cross-referencing with machine tool documentation and established clamping practice to determine optimal runout and torque settings. For specification sheets, compatibility checks or to secure supply of the Vertex VBC-BT30 taper, contact Metav Werkzeuge via info@metav-werkzeuge.com or phone +49 2822 7131930 for prompt procurement assistance Technical data SKU: VBC-BT30 GTIN: 4061905085505 Manufacturer: Vertex Facts Interface: BT30 Type: C-type taper Weight: 1.1 kg eClass: 21029010 Special features Standardised BT30 spindle mounting C-type taper geometry Image asset available FAQ What spindle interface does this taper use? The taper uses a BT30 spindle interface, providing standardised mounting for compatible spindles and toolholders. Does the component support high-speed machining? High-speed capability is not specified in the available data; assessment against machine and toolholder speed limits is recommended before use. How does the weight influence machining performance? At 1.1 kg, the mass contributes to damping and rigidity, which can reduce vibration and improve surface finish under appropriate clamping conditions. Which product codes identify this taper? The product is listed under SKU VBC-BT30 and GTIN 4061905085505 for procurement and inventory tracking. Who manufactures the taper? The part is manufactured by Vertex and is intended for integration into BT30 toolholding systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
BT40 Taper Tool Holder C-Type, Rigid Clamping - Vertex
Take advantage of the combination of standardised spindle compatibility, C-type taper clamping and compact weight for smooth workshop handling. Order the taper directly via Metav Werkzeuge or consult our specialists for application advice. VBC-BT40 BT40 C-type tool taper by Vertex — BT40 interface, C-type clamp The VBC-BT40 is a BT40 tool taper designed for secure spindle mounting and consistent clamping performance in machining centres and milling applications. BT40 interface for standard spindles C-type taper ensuring secure clamping Compact weight of 1.4 kg for easy handling Consistent spindle compatibility keeps production running The BT40 interface is an industry-standard spindle mount that guarantees broad compatibility with machining centres and toolholding systems. By using a standardised taper form, downtime for tool changeovers is reduced and setup becomes more predictable. For workshops seeking reliable interchangeability, the tool taper ensures components slot into the spindle with defined geometry, helping to maintain process stability and repeatable machine behaviour. Secure clamping and uncomplicated handling for precision work The C-type taper design provides secure axial and radial seating, which supports repeatable concentricity during machining operations. With a compact mass of 1.4 kg, the component is straightforward to manoeuvre during tool changes and storage, reducing handling effort without compromising mechanical integrity. The functional geometry of the taper assists in transmitting cutting forces while preserving the seating interface, making it suitable for routine production tasks where dependable clamping is essential. Seamless integration into procurement and workshop flows Delivered as a straightforward spindle adapter, the unit integrates with existing toolholder inventories and maintenance routines. Sourcing through an experienced distributor like Metav Werkzeuge supports supply reliability and quality control; Metav acts as a quality filter for the European market, combining broad product range with practical logistics. The combination of a standardised interface, robust taper form and compact design contributes to efficient tool management and predictable machine performance on the shop floor. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VBC-BT40 into existing setups; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and order guidance Technical Data SKU: VBC-BT40 GTIN: 4061905096358 Interface: BT40 Type: C-type taper Weight: 1.4 kg Facts Weight: 1.4 kg ECLASS: 21029010 GTIN: 4061905096358 Special features Adapter for BT40 spindle interface C-type taper design Manufacturer: Vertex SKU: VBC-BT40 FAQ What spindle type is the taper compatible with? The VBC-BT40 is compatible with machines using the BT40 spindle interface and is designed for standard BT40 toolholder systems. What does C-type taper mean for clamping performance? C-type taper refers to the seating geometry that ensures secure axial and radial contact; the VBC-BT40’s taper form supports repeatable clamping and consistent concentricity during machining. How heavy is the unit and how does that affect handling? The component weighs 1.4 kg, which keeps handling manageable while maintaining the mass needed for stable seating in the spindle. Can the taper be used in existing toolholder inventories? Yes, the design is intended to integrate with standard BT40 toolholder systems and workshop workflows when matched to corresponding spindle and retention fittings. Is the VBC-BT40 suitable for high-volume production environments? The standardised interface and secure taper seating are suitable for repetitive production use, supporting predictable tool changes and process continuity. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
BT50 Taper C-Type Tool Holder BT50 Shank - Vertex
Take advantage of the combination of a BT50 taper interface, C-type cone geometry and solid mass for reliable tool seating and stable machining. Order directly via Metav Werkzeuge or consult our specialists for compatibility and supply. VBC-BT50 BT50 cone (C-type) by Vertex — BT50 taper interface, 3.97 kg The VBC-BT50 is a BT50 taper cone in C‑type design, built for secure tool clamping and stable seating in machining centres and toolholders BT50 taper interface for standard spindles C‑type cone geometry for precise centring Mass 3.97 kg for stable operation Vertex industrial build quality Enhanced machining accuracy through a standard taper interface The BT50 taper ensures consistent mechanical engagement with matching spindle sockets, reducing lateral play during rotation. A standardised taper interface permits straightforward interchangeability across machines that accept BT50 tooling, eliminating adaptation work and streamlining setup. The result is improved machining accuracy and more predictable component tolerances, because a reliably seated taper translates directly into reduced wobble and more repeatable tool positioning. Stable seating and vibration damping for longer tool life The C‑type cone geometry contributes to a secure seat between tool and spindle, while the component mass of 3.97 kg helps to dampen vibrational energy during cutting. Reduced vibration not only supports surface finish quality but also extends cutter life by lowering dynamic loads at the cutting edge. For workshop environments where cycle consistency matters, this combination yields fewer rejects and less frequent tool replacement, supporting more efficient production runs. Compatibility-focused design for easy integration Designed around the BT50 standard, this taper component integrates with existing toolholding systems without requiring special adapters. The straightforward mechanical function means minimal setup time and predictable behaviour in rotating applications. For users migrating between machines or consolidating tooling across a shop floor, the standard interface simplifies inventory management and ensures parts remain usable across multiple machining platforms. Proven manufacturing standards and industrial robustness Manufactured by a recognised brand, the component reflects established workshop expectations for repeatability and durability. The geometry and mass balance have been configured for industrial use, meaning performance remains stable under continuous operation. For procurement teams seeking reliable spares or upgrades, this part delivers a pragmatic balance of compatibility and mechanical integrity without unnecessary complexity. Contact Metav Werkzeuge for tailored advice on Vertex BT50 tapers and to confirm compatibility with existing spindles; our Emmerich location acts as a quality filter for the European market Technical Data Article number: VBC-BT50 GTIN: 4061905096365 Manufacturer: Vertex Core data Taper interface: BT50 Mass: 3.97 kg eClass: 21029010 Special features Cone type: C‑type Designation: Kegel SKU: VBC-BT50 FAQ What spindle types is this taper compatible with? The taper is specified for BT50 spindle interfaces; the VBC‑BT50 works with machines and toolholders that accept the BT50 standard. How does the C‑type geometry affect seating? C‑type cone geometry on the VBC‑BT50 promotes precise centring and secure seating, enhancing stability during rotation. Will the component reduce vibration during heavy cuts? The mass and cone design contribute to vibration damping, improving stability and potentially extending tool life under demanding cutting conditions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
C20 Tapered Tool Holder C-Type – Vertex
Taking advantage of a C-type taper with a standard C20 mounting and a lightweight construction of 0.4 kg ensures reliable alignment and reduced spindle inertia for consistent machining performance. Order the taper directly via Metav Werkzeuge or consult Metav's advisors for application guidance. VBC-C20 taper (C-type) — C20 mounting, Vertex A VBC-C20 taper for secure tool mounting and precise spindle interface alignment in workshop and industrial applications. C20 mounting for standard spindle interfaces Lightweight 0.4 kg construction Manufactured by Vertex Reliable taper connection for accurate alignment Reliable alignment for consistent machining results The C-type taper design delivers a predictable contact geometry that supports precision alignment between spindle and toolholder. The defined C20 mounting ensures a repeatable interface, reducing runout and promoting steady tool engagement. For machines where concentricity and positional accuracy matter, this taper provides a simple mechanical solution that improves part quality and reduces rework. The combination of a standardised mounting and stable contact geometry minimises setup variability and supports process reproducibility. Reduced rotational inertia for faster spindle response At 0.4 kg, the taper contributes minimal mass to the rotating assembly, which translates into reduced inertia and quicker spindle acceleration and deceleration. This characteristic benefits applications with frequent tool changes or variable-speed cycles, where dynamic response affects cycle time and surface finish. Lower rotating mass can also reduce wear on bearings over time, supporting longer service intervals for the machine without altering machining parameters or compromising stability. Clear identification and practical integration in inventory Marked with SKU VBC-C20 and recorded under ECLASS 21029010, the component is ready for straightforward stock control and procurement. The GTIN 4061905096372 supports barcode-based tracking and simplifies logistics. Supplied by Vertex, the taper integrates with equipment that accepts a C20 interface and is suitable where a standardised, compact taper connection is required. Metav Werkzeuges’ European distribution ensures local availability and a quality filter for incoming parts. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VBC-C20 taper into existing setups and to arrange delivery from the Emmerich warehouse Technical Data Article number: VBC-C20 GTIN: 4061905096372 SKU: VBC-C20 Manufacturer: Vertex Facts Weight: 0.4 kg Mounting: C20 ECLASS: 21029010 Special features Type: C-type taper Brand: Vertex Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/18/01/9b/63/639b01187cbe127e134bbd9d/vbc-r8-main.PNG FAQ What spindle interfaces is this taper compatible with? The taper is designed for a C20 mounting, making the VBC-C20 suitable for machines and toolholders that accept the standard C20 spindle interface. How does the taper help machining accuracy? The C-type taper geometry provides a stable contact surface and repeatable seating, which reduces runout and contributes to consistent part geometry during machining. Is the weight significant for machine dynamics? With a mass of 0.4 kg, the taper reduces rotating mass and helps improve spindle acceleration and deceleration behaviour compared with heavier alternatives. Can the VBC-C20 be tracked in inventory systems? Yes, the product is identifiable by SKU VBC-C20 and GTIN 4061905096372, facilitating barcode-based inventory management. Who manufactures this taper and where is it distributed from? The taper is produced by Vertex and is available through Metav Werkzeuge's European distribution channels for prompt supply. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Kegel C-Typ
Technische Daten: Bezeichnung: Kegel Vollhartmetall Gewicht: 0,39 kg - 3,97 kg Aufnahme: BT30 bis SK50 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
M10x1.5P Taper C-Type Mounting Shank - Vertex
Take advantage of a compact, industry-standard taper that combines secure axial clamping with clear traceability; the result is reliable toolholding that supports steady production. Order the component directly via Metav Werkzeuge or consult the team for application advice. VBC-MT2 C-type taper with M10x1.5P thread by Vertex The VBC-MT2 is a C-type taper designed for standard toolholding in machine spindles, featuring an M10x1.5P clamping interface for axial fixation and easy inventory integration. C-type taper for secure tool mounting M10x1.5P threaded clamping interface Robust construction, weight 0.39 kg Precision clamping for consistent machining The C-type taper geometry delivers a standardised interface that simplifies repeatable positioning in a variety of toolholding arrangements. Coupled with the M10x1.5P threaded clamping interface, the component provides axial fixation that supports steady torque transmission and reduces micro-movement between tool and spindle. This results in improved process stability and fewer interruptions for re-setting, which benefits cycle-time reliability and overall shop-floor throughput. Compact, robust design that eases handling A compact form factor and 0.39 kg mass make the taper straightforward to handle during set-up and storage, while still offering the mechanical solidity expected in production environments. The balanced construction minimises unnecessary load on the spindle during rapid tool changes and contributes to predictable dynamic behaviour. Durable build quality ensures long service life under normal workshop conditions, reducing the need for frequent replacements. Clear identification and procurement benefits Traceability is supported through SKU: VBC-MT2 and GTIN: 4061905096341, helping to streamline stock management and reordering processes. As a Vertex product, the component integrates with existing tool inventories that rely on standard tapers and threaded clamping interfaces, simplifying compatibility checks. High-quality labelling and available imagery facilitate correct part selection and reduce the risk of assembly errors on the shop floor. Contact Metav Werkzeuge today for procurement or to discuss how the Vertex VBC-MT2 C-type taper with M10x1.5P interface can be integrated into existing toolholding systems Technical data Article number: VBC-MT2 GTIN: 4061905096341 Manufacturer: Vertex Facts Weight: 0.39 kg Thread: M10x1.5P ECLASS: 21029010 Special features Designation: Taper (C-type) Type: C-type taper Image available FAQ What clamping interface does this taper use? The VBC-MT2 uses an M10x1.5P threaded clamping interface to provide axial fixation and consistent tool retention. Is the part traceable for inventory systems? Yes; the component is identified as SKU VBC-MT2 with GTIN 4061905096341 to support procurement and stock management. Which manufacturer produces this taper? This taper is manufactured by Vertex and supplied under the SKU VBC-MT2 as a C-type taper for standard toolholding. Can this taper be used in automatic tool changers? The VBC-MT2 C-type taper with its threaded clamping interface is suited to standard toolholder arrangements; compatibility with specific automatic tool changers should be confirmed against the machine’s toolholding specifications. What is the physical weight of the taper? The taper weighs 0.39 kg, offering a compact and manageable component for workshop handling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
M12x1.75P Cone C-Type Toolholder, MT3 Thread Mount - Vertex
Taking advantage of the C-type taper and the M12x1.75P mounting thread, this taper coupling provides secure, repeatable toolholding with a compact footprint and low mass for easier handling. Its combination of precision and compatibility supports steady production and simplified tool changes—order the taper directly via Metav Werkzeuge or ask our consultants if needed. VBC-MT3 C-type taper — M12x1.75P mounting, Vertex A VBC-MT3 taper engineered for compact toolholding and stable mounting in conventional and CNC machining environments C-type taper for compact toolholders Thread M12x1.75P for secure mounting Precision machined for high repeatability Lightweight design at 0.6 kg Consistent clamping for reliable production The C-type taper is designed to deliver repeatable clamping with minimal radial runout, which translates into fewer part reworks and steadier machining tolerances. The integrated M12x1.75P mounting thread ensures a positive mechanical connection between spindle or adapter and the holder, reducing micro-movements under load. By focusing on accurate cone geometry and tight fitment tolerances, the component reduces setup variation; this is particularly important when batch-to-batch consistency is required. For operators unfamiliar with taper technology, the cone interface functions as a precise, self-centring joint: axial preload converts to radial stability, improving surface finish and tool life. Seamless integration into existing tooling systems Compact construction and standardised thread dimensions make the unit suitable for retrofits and new installations alike. The small mass and compact profile assist in maintaining spindle balance and reduce the dynamic load at higher spindle speeds, while the standard thread form supports interchangeability with common adapters and holders. Where shorter overall length or reduced overhang is a priority, the C-type format offers a space-efficient solution without sacrificing clamping integrity. For shops managing mixed tooling inventories, the component permits straightforward integration, shortening changeover times and contributing to higher machine uptime. Durable design that supports workshop workflows Manufactured to precise tolerances, the taper coupling emphasises low maintenance and long service intervals. The design concentrates on a robust mechanical fit rather than sacrificial coatings or complex assemblies, so inspection and cleaning routines remain simple and effective. The modest mass facilitates handling during toolset-up and reduces strain in repetitive operations, while the overall construction suits regular use in busy production areas. Assistance with selection and compatibility is available from Metav Werkzeuge for customers seeking assembly guidance or verification of fit with existing fixtures. For dependable C-type taper performance and expert advice on compatibility, contact Metav Werkzeuge — supplied from our Emmerich facility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VBC-MT3 GTIN: 4061905085901 Manufacturer: Vertex Facts Weight: 0.6 kg Mounting thread: M12x1.75P Classification: 21029010 Special features Type: C-type taper Designation: Kegel (C-type) SKU: VBC-MT3 FAQ What is the intended application for this taper coupling? The taper coupling is intended for secure toolholding and stable mounting in conventional and CNC machining setups; the VBC-MT3 supports compact toolholders and repeatable clamping. Is the M12x1.75P thread compatible with standard adapters? Yes, the M12x1.75P thread matches common adapter and retention systems and is designed for straightforward integration with existing tooling. How does the C-type taper affect machining accuracy? The C-type geometry promotes self-centring and reduced runout, improving repeatability and surface finish when the VBC-MT3 is used in correctly matched holders. Can the taper be used at high spindle speeds? The compact, low-mass construction helps maintain balance and reduce dynamic loads; suitability for specific spindle speeds should be confirmed against machine and tooling specifications. Who supplies technical advice for selection and fitment? Metav Werkzeuge provides guidance on compatibility and selection; for detailed technical support, contact their consultants via the published channels. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
M16x2.0P MT4 Taper C-Type Toolholder, Threaded Shank - Vertex
Benefit from the combination of precise C‑type geometry, an M16x2.0 threaded mounting and a compact 0.9 kg mass for reliable, low-vibration toolholding; order the part directly via Metav Werkzeuge or consult our specialists for application advice. VBC-MT4 Cone (C‑Type) with M16x2.0 Mounting by Vertex The VBC-MT4 is a C‑type cone designed for secure toolholding with an M16x2.0 threaded interface, intended for workshop and industrial toolroom use. C‑type precision cone M16x2.0 threaded mounting 0.9 kg mass for stable toolholding Increased stability through compact mass and geometry The C‑type cone provides a compact, balanced solution for tool retention where reduced vibration and consistent seating are required. Thanks to the 0.9 kg mass and the tapered C‑type profile, the component promotes stable clamping behaviour and helps to minimise residual runout, which in turn supports reproducible machining outcomes. This translates into fewer rejects and less downstream rework when used in repetitive production or accurate setup tasks. Simple mechanical integration with standard thread Equipped with a M16x2.0 threaded mounting, this cone integrates directly where an M16x2.0 interface is specified, allowing straightforward replacement or upgrade of existing holders. The standardised thread pitch reduces installation time and simplifies tooling logistics, enabling faster setup changes and maintaining machine availability. Compatibility with widely used interfaces supports efficient tool management and a rational workflow across production cells. Reliable design for everyday workshop use The tapered design and C‑type form factor focus on robust mechanical contact and predictable seating forces without adding unnecessary complexity. The result is a component that contributes to a reliable machining environment and reduced maintenance interventions. Where workshop efficiency is important, such a straightforward, mechanically driven solution supports continuous operation and lowers the risk of unexpected interruptions. For application support or to secure a Vertex C‑type cone for precise toolholding, contact Metav Werkzeuge in Emmerich for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VBC-MT4 GTIN: 4061905085727 Manufacturer: Vertex Facts Weight: 0.9 kg eClass: 21029010 Mounting: M16x2.0 pitch Special features C‑type cone geometry Designed for precision toolholding Compact, balanced mass FAQ What is the thread specification of the cone? The cone uses an M16x2.0 threaded mounting as stated for the VBC-MT4 C‑type cone by Vertex. How heavy is the component and what does that mean for stability? At 0.9 kg, the component offers a compact mass that contributes to stable seating and reduced vibration during operation. Is the VBC-MT4 suitable for direct replacement of existing C‑type holders? Where an M16x2.0 interface and C‑type geometry are required, the VBC-MT4 can be integrated as a compatible option within the same mechanical specification. Which manufacturer produces this cone and how can its origin be verified? The cone is manufactured by Vertex; the SKU VBC-MT4 and the GTIN 4061905085727 identify the product and its origin. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
M16x2.0P NT40 Taper C-Type, Threaded Spindle Adapter - Vertex
Taking advantage of the NT40 taper interface, the C-type configuration and the standard M16x2.0P drawbar thread ensures a precise, repeatable connection and robust retention during machining; order the VBC-NT40 directly via Metav Werkzeuge or consult a specialist for compatibility checks. VBC-NT40 NT40 taper adaptor, C-type with M16x2.0P drawbar thread — Vertex The VBC-NT40 is a compact NT40 taper adaptor designed for standardised toolholder retention in milling spindles, usable where a C-type configuration and M16x2.0P drawbar engagement are required NT40 taper interface for standard spindles C-type configuration for common toolholder setups M16x2.0P drawbar thread for secure retention Robust construction at 1.3 kg mass Repeatable location and high precision The NT40 taper is a widely adopted spindle interface that provides concentric seating and consistent axial location. By using a standardised taper connection, this adaptor reduces setup variation and minimises runout, which translates into improved component accuracy and longer tool life. The clear mechanical fit supports fast tool changes and keeps production interruptions short, making it suitable for series machining where reproducibility is essential. Secure retention with standardised drawbar engagement Retention is handled via the M16x2.0P drawbar thread, a common specification that delivers reliable axial clamping force. The C-type configuration complements this by matching customary toolholder geometries, so clamping performance remains stable under cutting loads. The assembly’s mass (approx. 1.3 kg) contributes to vibration damping without compromising handling, yielding steadier cuts and fewer rejects during high-precision operations. Engineered compatibility for workshop efficiency Produced by Vertex, this taper adaptor integrates with existing NT40 toolholding systems and is intended to simplify inventory and tool management. The compact design and standard interfaces mean minimal adaptation effort when retrofitting or expanding spindle fleets. For maintenance planning, familiar thread and taper standards allow straightforward inspection and replacement procedures, supporting continuous production and predictable service intervals. Contact Metav Werkzeuge today for a specification check and to secure the Vertex VBC-NT40 taper adaptor with NT40 interface and M16x2.0P drawbar thread for your workshop Technical data Article number: VBC-NT40 Manufacturer: Vertex GTIN: 4061905096204 Facts Weight: 1.3 kg ECLASS: 21029010 Thread: M16x2.0P Special features Taper: NT40 Type: C-type Image filename: vbc-r8-main.PNG FAQ What taper does this adaptor use? The adaptor uses an NT40 taper, providing standardised seating for compatible milling spindles. Which drawbar thread is fitted to the adaptor? The adaptor features an M16x2.0P drawbar thread for direct engagement with standard drawbar systems. Is the adaptor suitable for high-precision machining? Yes, the VBC-NT40 is designed to reduce runout and enhance repeatability, making it suitable for precision machining tasks. What does C-type mean for the adaptor? C-type denotes the specific configuration of the adaptor that aligns with common toolholder geometries and clamping practices. Who manufactures the VBC-NT40? The VBC-NT40 is manufactured by Vertex, a supplier of precision machine tool accessories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
M16x2.0P Planing and Boring Head Set SK-40 Mount, 6.8kg - Vertex
Take advantage of proven precision, compatibility with SK-40 spindles and secure M16x2.0 mounting to maintain consistent facing and boring results; order the set directly via Metav Werkzeuge or ask our consultants if needed VBH-110 Facing and Boring Head Set — SK-40 taper, M16x2.0 thread by Vertex The VBH-110 facing and boring head set is designed for precision facing and fine boring tasks on milling machines and machining centres, delivering repeatable surface quality and accurate bore alignment in industrial workshop environments VBH-110 facing and boring head set by Vertex SK-40 spindle taper for standard toolholders M16x2.0 thread for secure mounting Robust construction, weight 6.8 kg Repeatable precision for machining operations The head set provides a reliable way to achieve consistent facing and boring results across serial production runs. With a focus on dimensional stability, the assembly reduces variation between parts by enabling controlled tool engagement and fine axial adjustment. The mechanical design supports precision alignment, making the set suitable for tasks where surface flatness and concentricity are critical. This results in fewer reworks and a steadier process flow for production lines. Seamless integration with standard spindles and holders Engineered for compatibility with SK-40 interfaces and fitted with an M16x2.0 mounting thread, the unit integrates directly into standard machine spindles and holders without additional adapters. The standard taper ensures secure clamping and quick changeover, while the threaded connection provides positive axial fixation for heavy-duty cuts. This compatibility shortens setup time and supports higher machine utilisation in mixed-production shops. Robust construction for dependable workshop use Constructed to withstand daily industrial use, the set’s mass and build quality—total weight 6.8 kg—contribute to vibration damping and stable cutting behaviour. The compact yet sturdy design minimises deflection during facing and boring, preserving tool life and improving surface finish. Maintenance demands are low thanks to accessible components and a design that prioritises mechanical reliability for long service intervals. Versatile applications and practical handling Suitable for a wide range of facing and boring jobs, the set adapts to finishing and semi-finishing operations where precise bore diameter and flatness are required. Adjustments are intuitive, enabling skilled operators to dial in cuts efficiently. The combination of compatibility, mechanical stability and uncomplicated handling makes the product a practical choice for job shops and production departments seeking a dependable accessory for milling operations. For tailored procurement and application advice on Vertex facing and boring head sets, contact Metav Werkzeuge in Emmerich for local stock information and technical guidance via info@metav-werkzeuge.com or by telephone +49 2822 7131930 Technical data Article number: VBH-110 GTIN: 4061905093555 Manufacturer: Vertex Facts Weight: 6.8 kg eClass: 21041590 Special features Spindle taper: SK-40 Thread: M16x2.0P Intended use: Facing and boring operations FAQ What machines is the VBH-110 compatible with? The VBH-110 facing and boring head set is compatible with milling machines and machining centres that accept an SK-40 taper and have provisions for an M16x2.0 mounting thread. Can the set be used for finishing operations? Yes, the assembly is suitable for finishing and semi-finishing tasks where controlled removal and surface flatness are required; careful setup and appropriate tooling deliver the required finish quality. How does the SK-40 taper benefit workshop workflows? The SK-40 taper provides standardised clamping compatibility, enabling quick integration with existing toolholders and reducing changeover time in mixed-production environments. Is the mounting secure during heavy cuts? The combination of an SK-40 taper and M16x2.0 threaded fixation ensures secure axial and radial stability for routine facing and boring loads. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
M20x3.0P Boring and Facing Head Set, MT-5 Shank - Vertex
Take advantage of precise finishing and robust mounting: the combination of reliable precision, a standard M20x3.0 spindle thread and MT-5 taper compatibility keeps cycle times predictable and reduces setup repetition. Order the facing and boring head set directly via Metav Werkzeuge or consult the specialists for configuration advice. VBH-104 Facing and Boring Head Set — MT‑5 collet, M20x3.0 thread (Vertex) The VBH-104 facing and boring head set is a workshop-grade tool head assembly for accurate facing and internal boring operations on lathes and machining centres, optimised for stable finishes and repeatable set-ups. Accurate finishing for facing and boring Morse taper MT-5 collet compatibility M20x3.0 thread for standard spindle mounting Solid construction, approx. 7 kg mass Consistent finishes through engineered rigidity and balance The head assembly is built to provide consistent surface quality during facing and internal turning cycles. Its mass (approx. 7 kg) and robust construction reduce vibration and support a stable cutting process, which in turn improves tool life and repeatability. The combination of a standard M20x3.0 spindle thread and a Morse taper MT-5 interface simplifies mounting on a wide range of machines and shortens retooling times. For workshops that prioritise process reliability, the design translates into fewer rejects and less rework. Fast set-up and broad machine compatibility Mounting and changeover are simplified by the standard interface choices. The MT-5 taper accepts widely used adapters and holders, enabling quick integration into existing tooling concepts, while the M20x3.0 thread meets common spindle adaptor dimensions. The assembly permits controlled radial and axial positioning for accurate bore alignment and facing runs. Technical users will appreciate that these interfaces are industry-standard components; less experienced staff can thereby perform repeatable installations with minimal specialist tooling. Precision engineering that supports production targets Manufactured under the Vertex brand, the head set prioritises dimensional stability and service life. Key components are machined to maintain concentricity and minimise runout, delivering precision where surface integrity and bore tolerance matter. The set is intended for routine facing and boring rather than exotic alloys not specified in the data; selection of cutting parameters and inserts remains a process decision. The overall design focuses on delivering measurable process improvements—shorter set-up, stable cutting conditions and consistent finish quality—that integrate into a leaner production flow. For a tailored quotation or to confirm machine compatibility, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, practical advice and reliable supply. Technical Data SKU: VBH-104 GTIN: 4061905089428 Manufacturer: Vertex Facts Weight: 7 kg Thread: M20x3.0P Collet / taper: MT-5 eCl@ss: 21041590 Special features Facing and boring head set Designed for workshop and production environments Standard spindle thread and Morse taper interface FAQ Which spindles accept this head set? The VBH-104 facing and boring head set mounts to spindles with an M20x3.0 thread and is compatible with toolholders that accept an MT-5 taper, matching common lathe and turning centre interfaces. What does MT-5 mean for mounting? MT-5 indicates a Morse taper 5 seating; the VBH-104 uses this taper for secure axial and radial location, allowing conventional collet or sleeve adapters to be employed for installation. Is this suitable for both facing and boring tasks? Yes, the assembly is engineered specifically for facing and boring operations, offering the rigidity and mounting standardisation required for repeatable finishing work. Why is the mass of the head set relevant? The head set’s mass (about 7 kg) contributes to damping of cutting vibrations and improves stability during machining, which helps to achieve better surface finish and consistent bore accuracy. Who manufactures this head set? The head set is produced by Vertex and supplied under the VBH series; Vertex is noted for manufacturing engineered machining accessories suitable for industrial applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
M24x3.0P Taper C-Type Mount MT5 - Vertex
Take advantage of the combination of a precision C-type taper, a standard M24x3.0P drawbar thread and robust mass for secure spindle connection and consistent machining results. Order directly via Metav Werkzeuge or ask our consultants for application advice. VBC-MT5 – Vertex C-type taper adapter with M24x3.0P thread The VBC-MT5 is a C-type taper adapter intended for spindle and tool-holder interfaces, providing a secure mechanical connection for workshop and industrial machining applications. Precision C-type taper adapter M24x3.0P drawbar thread compatibility Stable mass of 1.6 kg for secure mounting Manufactured by Vertex for consistent quality Accurate interface for repeatable machining The C-type taper design ensures a concentric, repeatable interface between spindle and tooling, reducing setup variation and contributing to consistent part quality. The combination of a standard taper form with a defined M24x3.0P drawbar thread means the adapter integrates with common drawbar systems, so process stability is improved without complex modifications. This translates into fewer rejects and more predictable cycle times in production environments where precision matters. Secure thread connection that simplifies retrofit A clear advantage of the adaptor is the use of the standard M24x3.0P drawbar thread, which enables straightforward fitting into machines that accept this metric pitch. The threaded drawbar engagement provides axial retention while the taper transfers radial and torque loads, meaning tool changes and retrofits are both simple and reliable. With a mass of 1.6 kg, the component adds inertia that helps dampen vibration during cutting, supporting cleaner surface finishes and longer tool life. Robust manufacture for workshop conditions Produced by a recognised manufacturer, the adapter is intended for demanding workshop use where repeatable mounting and long service life are required. The solid construction supports routine machining tasks and frequent tool changes without compromising alignment. Where traceability is required, the component is identifiable by its SKU and GTIN, supporting inventory control and maintenance planning. For complex applications or integration into legacy machines, technical advice is available to ensure the choice matches the intended machining task. Contact Metav Werkzeuge today to specify the Vertex C-type taper adapter VBC-MT5 with M24x3.0P drawbar thread for reliable spindle connections, or request tailored technical guidance from our consultants at Metav Werkzeuge Technical data SKU: VBC-MT5 GTIN: 4061905087196 Manufacturer: Vertex Core specifications Designation: Kegel (taper) Type: C-Type Drawbar thread: M24x3.0P Weight: 1.6 kg eClass: 21029010 Special features Standardised C-type taper interface M24x3.0P thread for drawbar systems Suitable for workshop and industrial spindles Vertex product identity FAQ What machines is the adaptor compatible with? Compatibility is determined by the spindle's acceptance of a C-type taper and an M24x3.0P drawbar thread; the VBC-MT5 is designed for machines that use these standard interfaces. Does the adaptor support heavy-duty machining? The VBC-MT5 provides a robust mechanical connection and added mass for improved stability; suitability for heavy-duty tasks depends on the specific machine and process parameters. How is the adaptor installed and secured? Installation uses the M24x3.0P drawbar thread for axial retention and the C-type taper for concentric seating; proper torque on the drawbar and correct alignment are essential for dependable operation. How can the component be identified for ordering or inventory? Use the SKU VBC-MT5 and the GTIN 4061905087196 to order the exact Vertex taper adapter and to maintain traceability in stock systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT-4 Face and Boring Head Set M16x2.0P, Collet System - Vertex
Combining rigid MT‑4 collet compatibility, a secure M16×2.0P mounting thread and a 6.1 kg mass for vibration damping, this facing and boring head set delivers steady, repeatable finishing and internal boring performance. Order the VBH-103 directly via Metav Werkzeuge or ask our consultants if needed. Facing and Boring Head Set VBH-103 by Vertex — MT‑4 collet, M16×2.0P thread A compact Facing and Boring Head Set VBH-103 intended for precise face machining and internal boring where secure mounting and vibration resistance are essential MT‑4 collet compatibility for standard tooling M16×2.0P mounting thread for secure attachment Robust 6.1 kg construction for vibration damping Vertex industrial quality and traceable production Stable machining for repeatable finishing quality The set is engineered to provide consistent runout and improved surface finish by combining a heavy-duty body with standard tooling interfaces. With its MT‑4 collet compatibility and M16×2.0P mounting, the assembly ensures a reliable hold on cutting tools, reducing chatter and rework. For operations that demand stable finishing, the result is fewer corrective passes and more predictable tolerances. Simple integration with existing spindles and toolholders Designed around common industrial standards, the head set offers straightforward mechanical integration. Machines or adapters that accept an M16×2.0P mounting can host the unit with minimal modification, while the MT‑4 collet interface accepts a broad range of cutters and boring tooling. This compatibility translates into lower setup complexity and faster changeovers during mixed-production runs. Robust construction that supports operator confidence The unit’s mass of 6.1 kg contributes to natural vibration damping without compromising access to the workpiece. The sturdy build supports steady cutting conditions over medium-duty cycles, promoting longer tool life and improved surface integrity. Regular inspection of the collet and mounting thread keeps performance optimal and preserves the head set’s ability to deliver consistent results. For tailored technical advice and availability from stock, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or call +49 2822 7131930 — to discuss the Vertex Facing and Boring Head Set VBH-103 and matching tooling options. Technical Data Article number: VBH-103 GTIN: 4061905088629 Manufacturer: Vertex Facts Weight: 6.1 kg Mounting thread: M16×2.0P Collet type: MT‑4 Special features Facing and boring head set configuration Compatibility with standard MT‑4 tooling Industrial-grade construction for reduced vibration FAQ Which collet type is used with this head set? The Facing and Boring Head Set VBH-103 from Vertex uses an MT‑4 collet interface for compatible boring and finishing cutters. What mounting thread is required for installation? Installation requires an M16×2.0P mounting thread; the VBH-103 is designed to attach securely via that thread form. How does the weight affect machining performance? At 6.1 kg, the mass of the VBH-103 contributes to vibration damping, which promotes stable cutting and improves surface finish during facing and boring tasks. Is the head set suitable for quick tool changes? The MT‑4 collet system on the Vertex VBH-103 facilitates the use of standard tooling, supporting efficient tool changes when using compatible collets. What production benefits can be expected from this head set? By combining secure clamping, standard interfaces and a robust body, the VBH-103 supports repeatable results and reduced rework in medium-duty facing and boring operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-50 Facing and Boring Head Set M24x3.0P, Heavy-Duty Turning Attachment - Vertex
Take advantage of the combination of robust clamping, secure M24x3.0P mounting and precision balance for stable machining and consistent finishes. Order the set directly via Metav Werkzeuge or consult the Metav specialists for compatibility checks. VBH-108 VBH Facing and Boring Head Set – NT-50 collet, M24x3.0P thread (Vertex) The VBH-108 VBH is a facing and boring head set designed for precision internal turning and facing operations in CNC and conventional machine tools. *NT-50 collet system for rigid clamping *M24x3.0P thread for secure mounting *Precision-balanced mass for vibration control *Engineered for facing and internal boring Repeatable accuracy through rigid interfaces The set's core design focusses on repeatable accuracy: the NT-50 collet interface delivers a rigid clamping arrangement that reduces radial runout, while the M24x3.0P mounting thread secures the assembly to standard tooling spindles. This mechanical stability supports consistent cutting conditions, which in turn leads to predictable tool life and uniform surface quality during production runs. Emphasis is placed on reducing variables that commonly cause scrap, so machining cycles remain efficient and trackable. Stable machining and practical setup benefits Stable operation is achieved by a balanced assembly with a mass of 8.9 kg, which contributes to lower vibration at the cutting zone and steadier finishes. The head set is intended for combined facing and boring tasks, allowing a single tooling solution to serve two process steps. By consolidating operations, the tooling arrangement can shorten set-up sequences and reduce the number of changeovers required in short to medium production runs, helping to maintain throughput and machine availability. Integration into workshop workflows and documentation The facing and boring head set is supplied as a standard Vertex assembly and is suitable for integration into existing toolholding systems that accept the specified thread and collet type. Technical specification data such as mounting thread and collet type are provided to facilitate correct selection and installation. Purchasing via Metav ensures access to verified documentation and distribution channels, supporting predictable delivery into the workshop and alignment with existing tooling inventories. For specification requests or to arrange supply from our Emmerich warehouse, contact Metav Werkzeuge regarding the Vertex VBH-108 facing and boring head set – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VBH-108 GTIN: 4061905091179 Brand: Vertex ECLASS: 21041590 Facts Mass: 8.9 kg Thread: M24x3.0P Collet type: NT-50 SKU: VBH-108 Special features Facing and boring head set NT-50 collet interface M24x3.0P mounting thread Precision-focused design FAQ What mounting interface does the head set use? The VBH-108 uses an M24x3.0P mounting thread together with an NT-50 collet interface for secure attachment. What operations is this set intended for? This assembly is a facing and boring head set intended for precision internal turning and facing tasks on suitable machine spindles. What is the mass of the assembly and why does it matter? The VBH-108 has a mass of 8.9 kg; the mass contributes to the dynamic behaviour and helps reduce vibration during cutting. Which identifiers are associated with this product for ordering and tracking? Relevant identifiers are SKU VBH-108 and GTIN 4061905091179 for ordering and inventory management. Who manufactures the head set? The head set is manufactured by Vertex and supplied under the Vertex VBH product family. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-50 Precision Boring Head Set VBH620, M24x3.0P Thread - Vertex
Take advantage of the combination of precision, robust NT‑50 compatibility and a secure M24×3.0 thread interface for consistent bore quality and reduced rework; order the assembly directly via Metav Werkzeuge or consult our specialists for integration advice. VBH620 Precision Boring Head Set — NT‑50 Interface, M24×3.0 Thread (Vertex) The VBH620 is a precision boring head set intended for fine internal machining and hole finishing, designed to be mounted in NT‑50 toolholders for workshop and light industrial turning operations. Precision boring head set, VBH620 NT‑50 spindle compatibility M24 × 3.0 thread interface Robust 7.8 kg assembly for stability Accurate hole finishing for demanding components The assembly delivers a precision boring capability that supports fine-tuning of internal diameters where concentricity and surface condition matter. By offering a rigid construction and a defined thread interface, the set helps to reduce tolerance scatter and minimise rework cycles. The design focuses on transferring cutting forces cleanly to the toolholder, which contributes to a predictable machining outcome and reliable bore geometry. Seamless NT‑50 integration for fast setup Engineered for compatibility with NT‑50 toolholders, the device features an M24×3.0 thread interface to secure the boring head within the holder. This combination simplifies changeovers and keeps the axial and radial positions repeatable after re-clamping. The standardised connection supports straightforward alignment procedures and streamlines tool preparation, making it suitable for workshops that maintain NT‑50 tooling systems. Engineered mass and geometry for stability and repeatability With an overall assembly weight of 7.8 kg, the design uses mass and balanced geometry to dampen vibration during cutting, which improves surface finish and dimensional stability. The construction emphasises rigidity to lower the risk of chatter when adjusting bore diameter, and the robust build supports consistent results across repeated operations. These characteristics are particularly relevant for components that demand tight bore tolerances or superior internal surface quality. Workshop compatibility and traceable identification The set is supplied as a ready-to-fit precision boring assembly with a clear SKU and GTIN for inventory control and reordering. Its standard interfaces ensure compatibility with existing NT‑50 systems and common workshop practices for tool maintenance. Routine upkeep—cleaning the M24×3.0 thread and verifying clamping condition—preserves accuracy and extends service intervals, while the standardised labelling supports traceability in production environments. For procurement or integration support with Vertex tools, contact Metav Werkzeuge—our Emmerich quality hub supplies the VBH620 with NT‑50 compatibility and can advise on mounting, toolholder matching and workshop logistics; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VBH620-NT50 GTIN: 4061905088605 Manufacturer: Vertex Performance figures Weight: 7.8 kg ECLASS: 21041590 Special features Precision boring head set NT‑50 collet/toolholder compatibility M24×3.0 thread connection Robust assembly for stable operation FAQ What toolholder interface does the set use? The set is designed for NT‑50 toolholders and secures via an M24×3.0 thread, ensuring a standardised fit for compatible toolholder systems. Is the VBH620 suitable for fine finishing operations? Yes. The VBH620 precision boring assembly is intended for fine internal machining and offers the stability required for improved surface finish and dimensional control. How heavy is the boring head assembly and why does that matter? The complete assembly weighs 7.8 kg; the additional mass helps to dampen vibration during cutting, which supports repeatable bores and better surface quality. Can the VBH620 be identified for inventory and reordering? The product is supplied with the SKU VBH620-NT50 and GTIN 4061905088605 to support inventory control and straightforward reordering. What maintenance helps retain accuracy over time? Routine cleaning of the M24×3.0 thread, inspection of the clamping surfaces and correct mounting in an NT‑50 holder will help preserve the set’s precision and service life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT30 Taper Tool Holder C-Type M12x1.75P - Vertex
Take advantage of the combination of a genuine NT30 taper, a defined M12x1.75P mount thread and a compact 0.7 kg mass to ensure consistent spindle seating and reduced setup variability. Order the cone directly via Metav Werkzeuge or consult the technical team for fitment advice. VBC-NT30 NT30 taper cone, C‑type with M12x1.75P thread by Vertex VBC-NT30 is a C‑type cone designed for secure NT30 spindle interfaces, offering a standard M12x1.75P retention-thread connection for reliable tool clamping across production machines NT30 taper for standard spindles M12x1.75P retention-thread interface C-type cone for precise seating Robust 0.7 kg construction Optimised seating for consistent spindle accuracy The taper geometry delivers a precise fit between toolholder and spindle, reducing radial runout and improving repeatability across batches. The defined M12x1.75P mount thread provides a standardised method for attaching retention devices, allowing secure clamping without ambiguous adapters. By ensuring uniform contact and axial alignment, the cone supports stable cutting conditions and contributes to longer tool life and fewer rejected parts. Stable mass and balance to lower vibration A compact mass of 0.7 kg helps to balance assembly inertia while maintaining a low-profile design that does not overload the spindle. This balanced construction reduces vibration transmission at typical machining speeds, which in turn supports better surface finish and steadier tool paths. The result is a tangible improvement in process reliability and cycle-time consistency for repetitive production tasks. Straightforward integration into existing tool systems The NT30 taper form factor and C‑type configuration suit a wide range of machines that accept NT30 interfaces. Compatibility with a standard M12x1.75P retention-thread arrangement eases replacement and retrofit operations, minimising machine downtime during changeovers. Clear identification via SKU and GTIN simplifies inventory management and ensures traceability in procurement and maintenance workflows. Contact Metav Werkzeuge in Emmerich for a compatibility check or bespoke advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VBC-NT30 GTIN: 4061905096198 Designation: Kegel, C‑Typ Mount thread: M12x1,75P Weight: 0.7 kg Facts Weight: 0.7 kg ECLASS: 21029010 Special features NT30 taper cone C‑type design Vertex brand FAQ What spindle standard does this cone use? The cone is manufactured to an NT30 taper form, ensuring compatibility with spindles and toolholders designed for the NT30 standard. Which retention thread is fitted to the cone? The cone features an M12x1.75P mount thread for retention devices, as specified for this C‑type Vertex component (SKU VBC-NT30). How much does the cone weigh and how does that affect machining? The component weighs 0.7 kg; this compact mass supports balance without adding excessive inertia, helping to reduce vibration and promote consistent cutting performance. Is this cone suitable for quick retrofit or replacement tasks? Yes, the C‑type NT30 cone with a standard thread interface is intended for direct replacement or retrofit where NT30 toolholders and corresponding retention systems are used. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Plan- und Ausdrehkopfset VBH
Technische Daten: Bezeichnung: Plan- und Ausdrehkopfset VHM Gewicht: 5,7 kg - 9,4 kg Gewinde: M12x1,75P - M24x3,0P Spannzangen Typ: BT-40 - SK-50 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Precision boring heads and taper adaptors for milling operations
Boring heads and taper adaptors are essential components for producing precise, round bores on conventional milling machines. The two product groups are related but distinct: boring heads deliver adjustable, high-precision internal diameters, while taper adaptors provide the correct machine interface and secure tool holding.
How they work in typical workshop and production settings
Boring heads are mounted on milling spindles and adjusted to cut exact diameters, enabling bores with defined fits to be produced on standard machine tools. Taper adaptors ensure compatibility with the machine taper and maintain concentricity under load. For larger diameters, boring bars are fitted into the boring head, allowing stepwise or single-pass enlargement while preserving roundness and surface quality.
Tangible benefits for daily machining
- Increased hole accuracy and repeatability through fine adjustment of boring heads
- Capability to produce large-diameter bores on conventional milling machines, reducing the need for specialised equipment
- Flexible setup: boring heads accept interchangeable boring bars for different diameters and tasks
- Reduced rework and improved fit quality when mating components are required
- Simple integration with standard machine tapers via taper adaptors, improving changeover speed
Why Metav is the pragmatic choice for procurement
Metav positions itself as a precision partner for industry and workshops, combining decades of competence with a broad range of products. From the central hub in Emmerich, Metav offers a curated selection that acts as a quality filter for the European market, supported by more than 48,000 customers and an assortment of over 250,000 products. That combination makes Metav a practical source when standard-compliant boring heads and taper adaptors are required quickly and reliably.
technical data (key points)
- designed for use on milling machines
- produces precise, round bores with defined fits
- suitable for conventional machine tools to create bores with large diameters
- accepts appropriate boring bars depending on application
- taper adaptors provide machine taper interface and toolholding accuracy
Essential takeaway
Boring heads and taper adaptors together enable conventional milling machines to produce accurate, fit-quality bores and handle large diameters with flexibility and repeatability. Metav supplies a broad, quality-filtered range to simplify sourcing and reduce procurement complexity.
FAQ
What are boring heads and taper adaptors used for?
Boring heads are used to produce adjustable, accurate internal diameters; taper adaptors provide the matching machine taper and secure mounting for the boring head.
Can boring heads create large-diameter bores on a milling machine?
Yes—boring heads are designed to enlarge holes to larger diameters on conventional milling machines, often by fitting longer or larger boring bars into the head.
How are boring bars fitted into a boring head?
Depending on the application, appropriate boring bars are inserted into the boring head and secured; this modular approach allows quick changeover between diameters and tool types.
Do taper adaptors affect concentricity and runout?
Properly selected taper adaptors ensure correct machine interface and help maintain concentricity and low runout for the boring head during machining.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com