Precision boring heads and taper adaptors for accurate large-diameter holes
Precision boring heads and taper adaptors enable machining of highly accurate, round bores on milling machines and deliver tight fits for assembly and tooling. These systems are used to produce large-diameter, close-tolerance holes by combining robust boring heads, matched taper adaptors and appropriate boring bars, allowing operators to achieve repeatable concentricity and surface finish. Ideal for metalworking applications where hole accuracy and fit are critical, they reduce rework and improve assembly reliability by providing controlled material removal and straightforward tool setup.
Ø10-Ø220mm Facing and Boring Head Set, NT40 Collet Interface - Vertex
Benefit from precise facing and boring performance thanks to the combination of an NT-40 taper and a wide Ø10–Ø220 mm working range; the set’s compact 4.7 kg construction delivers stable cutting for repeatable bores. Order the face and boring head set directly via Metav Werkzeuge or consult our advisors for configuration and application advice. VBHC-NT40-BC3 face and boring head set — NT-40, Ø10–Ø220 mm (Vertex) A versatile VBHC-NT40-BC3 set for precision facing and boring on milling spindles with NT-40 taper, designed to cover a broad diameter range for production and toolroom applications. NT-40 taper for rigid mounting Suitable for diameters Ø10–Ø220 mm Set includes facing and boring heads Balanced 4.7 kg assembly for stable operation Stable mounting for repeatable bores and faces The NT-40 interface provides a rigid connection to the machine spindle, reducing runout and improving surface finish during facing and boring operations. The set’s design focuses on dimensional consistency: with a working range of Ø10–Ø220 mm, the tooling minimises the need for multiple dedicated tools, which simplifies tool inventory and shortens changeover time. The compact assembly weight of 4.7 kg helps maintain machining stability without imposing excessive load on the spindle bearings. For users familiar with milling tooling, the head combines conventional boring adjustment with a facing function to deliver accurate, flat surfaces and concentric bores. Faster setup and greater process flexibility Modular tooling in a single set accelerates production planning and reduces fixture complexity. The integrated adjustment mechanisms allow for precise diameter setting and fine tuning, so machining tolerances can be achieved in fewer passes. This leads to improved cycle efficiency and less rework on precision components. The configuration is suitable for general workshop environments and small-batch production, where quick adaptation between facing and boring tasks is required. By covering a wide diameter spectrum, the set supports a variety of components without frequent tool changes, contributing to predictable throughput and stable manufacturing processes. Industrial-grade compatibility and workshop readiness Designed as a complete set for facing and boring tasks, the assembly suits machine shops that require reliable, repeatable results on a broad range of parts. The NT-40 taper is compatible with many vertical and horizontal milling spindles commonly found in European workshops, enabling straightforward integration into existing setups. The tooling is presented as a set to ensure all necessary components are available for immediate use. Confidence in machining results is reinforced by the brand heritage of Vertex and the practical advantages of consolidated tooling: less downtime, consistent finishes and a simpler tooling strategy for procurement and maintenance. For detailed specification checks or to confirm suitability for specific machines, contact Metav Werkzeuge in Emmerich — their specialists can advise on the VBHC-NT40-BC3 set and recommend the optimal configuration for the application Technical data Article number: VBHC-NT40-BC3 Brand: Vertex GTIN: 4061905086700 SKU: VBHC-NT40-BC3 Facts Weight: 4.7 kg Suitable diameter: Ø10–Ø220 mm eClass: 21041590 Special features NT-40 taper mounting Face and boring head set Ready-to-use assembly FAQ What diameter range can be machined with this set? The VBHC-NT40-BC3 face and boring head set covers a working range of Ø10–Ø220 mm, allowing a wide variety of bore sizes to be produced with a single tooling set. Which spindle taper is required for mounting this tooling? Mounting requires an NT-40 spindle taper; the VBHC-NT40-BC3 is built for rigid connection to compatible milling spindles for stable operation. Does the set include components for both facing and boring? Yes, the VBHC-NT40-BC3 is supplied as a set that includes both facing and boring heads to support surface facing and internal diameter machining. What is the overall weight of the tooling assembly? The complete assembly weighs approximately 4.7 kg, which contributes to a stable setup while remaining manageable for handling and installation. Is this set suitable for workshop and small-series production? The VBHC-NT40-BC3, by Vertex, is intended for workshop and production use where flexibility and repeatability are required; the broad diameter range and set format support small-series and mixed-batch machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set, SK50 Shank - Vertex
Take advantage of precise facing and internal boring with a compact set that covers a wide diameter range and fits SK50 spindles for reduced setup time and consistent results. Order the facing and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBHC Facing and Boring Head Set — SK50 interface, Ø10–Ø220 mm (Vertex) The VBHC facing and boring head set is a compact tooling solution for precision face and internal machining, designed for use where reliable concentricity and simple diameter adjustment are required SK50 taper interface for stable mounting Versatile range Ø10–Ø220 mm for bores Precision radial adjustment for fine boring Compact set for facing and internal machining Improved machining accuracy for finishing and bores This head set delivers consistent concentricity and controlled material removal for both facing and internal machining operations. The adjustable head allows incremental radial changes that translate directly into predictable bore sizes, reducing scrap and secondary finishing. By covering a broad working span, the equipment minimises tool changes and supports steady cycle times, which is particularly beneficial in batch production and repair work. The emphasis on precision and repeatability helps maintain component tolerances without complex set-ups. Stable mounting and faster set-up for higher throughput Designed around a robust SK50 interface, the assembly provides a secure connection to the machine spindle, lowering vibration and enhancing surface finish. The SK50 taper offers a standardised mechanical connection that simplifies interchangeability and supports repeatable positioning when swapping tooling. As a set, the solution groups complementary heads and accessories to shorten machine idle time; fewer interruptions lead to a measurable improvement in daily throughput while preserving machining quality. Durable design that supports workshop efficiency Engineered for regular workshop use, the configuration balances ease of operation with long-term serviceability. The set concept reduces the number of separate purchases and centralises tooling for facing and boring tasks, supporting a streamlined inventory. When combined with a reliable supply partner, this approach contributes to operational continuity. The focus on robust interfaces and accurate adjustment supports reduced rework and steady production output, aligning performance with the practical needs of shops and contractors. Contact Metav Werkzeuge to discuss the Vertex VBHC facing and boring head set for SK50 machines and to arrange a technical consultation tailored to specific machining requirements Technical data Article number: VBHC-SK50-BC3 GTIN: 4061905091315 ECLASS: 21041590 Manufacturer: Vertex Set: yes Facts Suitable diameter range: Ø10–Ø220 mm SKU: VBHC-SK50-BC3 Special features Mounting interface: SK50 taper Application: facing and internal boring Brand: Vertex Configuration: set FAQ What diameter range is covered by the head set? The head set covers a working range of Ø10–Ø220 mm, allowing a wide span of internal diameters to be produced without multiple specialised tools. Which spindle interface does the set use? The assembly uses an SK50 taper interface for stable mounting and repeatable positioning on compatible spindles. Is this set suitable for both facing and boring operations? Yes, the Vertex facing and boring head set is designed specifically for combined facing and internal boring tasks in workshop and production environments. How does the radial adjustment affect bore accuracy? Fine radial adjustment enables predictable incremental changes to the bore diameter, improving precision and reducing the need for additional finishing. What indicates that this product is a set rather than a single head? The product is delivered as a set (VBHC-SK50-BC3), which groups complementary components for facing and boring to reduce tool changes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Plan- und Ausdrehkopfset, Satz, VBHC - Vertex
Das Set vereint Präzision und Praxisnutzen: Die Kompatibilität mit Messschiebern von Ø10 bis Ø220 mm und die robuste Ausführung sorgen für schnelle Rüstzeiten und wiederholbare Messergebnisse. Bestellen Sie das Set direkt über Metav oder sprechen Sie unsere Beratung an, wenn Sie individuelle Passungen oder technische Details klären möchten. Plan- und Ausdrehkopfset von Vertex Das Plan- und Ausdrehkopfset bietet eine präzise Lösung für Plan- und Ausdreharbeiten an Drehmaschinen und ist für Werkstatt‑ und Serienbetrieb ausgelegt Plan- und Ausdrehkopfset »VBHC« von Vertex Kompatibel mit Messschieber Ø10-Ø220mm Komplettsatz für präzise Ausdreharbeiten Robust und geeignet für Werkstattgebrauch Einfache Montage und wiederholbare Genauigkeit Mehr Präzision bei Plan‑ und Ausdreharbeiten Dank des Sets lassen sich Plan‑ und Ausdrehoperationen mit hoher Präzision ausführen, was Maßhaltigkeit und Oberflächenqualität verbessert. Die Möglichkeit, Messschieber mit Ø10–Ø220 mm einzusetzen, erhöht die Flexibilität bei unterschiedlichen Werkstückdurchmessern. Anwender profitieren von einem durchdachten Aufbau, der das Vermessen und Justieren vereinfacht und dadurch Stillstandszeiten reduziert. Robuste Konstruktion für den täglichen Werkstattbetrieb Die Ausführung des Kopfsets ist auf Dauerbetrieb ausgelegt, sodass Langlebigkeit und Verschleißfestigkeit im Vordergrund stehen. Durch die stabile Bauweise bleibt die Ausrichtung auch bei wiederholten Aufspannungen konstant, was Nacharbeit minimiert. Ein kompletter Satz an Komponenten gewährleistet, dass Ersatzteile und Montage sinnvoll aufeinander abgestimmt sind, damit Prozesse reproduzierbar bleiben. Vielseitiger Einsatz in Fertigung und Instandhaltung Dieses Kopfset eignet sich für Präzisionsdrehen, Feinbearbeitung und das Glätten von Stirnflächen und Bohrungsdurchmessern. Die Kombination aus Ausdrehkopf und adaptierbaren Aufnahmen macht das Set zur geeigneten Wahl für Kleinserien und Prototypenfertigung ebenso wie für Reparaturaufgaben in der Instandhaltung. Anwender erreichen schneller die geforderte Toleranzklasse ohne umfangreiche Nachbearbeitung. Zielgruppe, Effizienz und Time‑to‑Value Entwickelt wurde das System für Werkstätten, den Fachhandel und industrielle Fertiger, die Wert auf wiederholbare Genauigkeit legen. Die ergonomische Handhabung und reduzierte Rüstzeiten erhöhen die Effizienz pro Arbeitsplatz und senken die Stückkosten bei wiederkehrenden Bearbeitungen. Für Einkäufer bietet sich damit eine rentable Investition, die Prozesssicherheit und Produktqualität messbar steigert. Empfehlung: Für wirtschaftliche Präzisionsbearbeitung empfiehlt sich das VBHC‑Set von Vertex als zuverlässige Lösung — sichern Sie diese Präzisionsausrüstung über Metav und nutzen Sie die Beratung und schnelle Lieferung aus Emmerich; bei Rückfragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: VBHC-SK40-BC3 Marke: Vertex Bezeichnung: Plan- und Ausdrehkopfset Serie: VBHC Satz: Ja eClass: 21041590 Daten Geeignet für Messschieber: Ø10-Ø220mm Besonderheiten Satz: Komplettsatz Geeignet für Messschieber: Ø10-Ø220mm UID: VBHC-SK40-BC3 FAQ Welche Durchmesser lassen sich mit dem Set bearbeiten? Das Set ist kompatibel mit Messschiebern von Ø10 bis Ø220 mm, wodurch eine breite Palette an Werkstückdurchmessern abgedeckt wird. Das Plan- und Ausdrehkopfset von Vertex eignet sich damit für viele Standard‑Anwendungen in Werkstatt und Produktion. Für welche Maschinen ist das Set geeignet? Das VBHC‑Kopfset von Vertex (VBHC-SK40-BC3) wurde für den Einsatz an Drehmaschinen konzipiert, die Aufnahmen für Ausdrehköpfe unterstützen. Prüfen Sie die Maschinenschnittstelle auf Kompatibilität vor dem Kauf. Enthält das Set alle benötigten Komponenten für die Montage? Ja, das Plan- und Ausdrehkopfset wird als Komplettsatz geliefert, sodass Montage und Inbetriebnahme mit den beigefügten Teilen möglich sind. Wie verbessert das Set die Prozesssicherheit? Durch die stabile Bauweise und wiederholbare Aufspannungen reduziert das Set Nacharbeit und Nachmessungen, was zu konstanteren Fertigungsergebnissen führt. Die Investition in das VBHC‑Set von Vertex zahlt sich durch geringere Ausschussraten aus. Ist das Set für Serienfertigung geeignet? Das VBHC‑Set ist sowohl für Einzel‑ als auch für Serienfertigung ausgelegt und bietet aufgrund der robusten Konstruktion und der einfachen Handhabung hohe Wiederholgenauigkeit. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Planing and Boring Head Set, C-20 Collet Compatible - Vertex
The combination of a wide working range, C-20 collet compatibility and a compact 4 kg set supports efficient shop workflows and consistent bore quality. Benefit from straightforward integration into existing toolholding and a robust design for repeatable facing and boring tasks. Order the VBHC facing and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBHC Facing and Boring Head Set — Ø10–Ø220 mm, C-20 Collet (Vertex) The VBHC facing and boring head set is a compact toolset for facing and internal turning operations on workpieces with diameters from Ø10–Ø220 mm, compatible with C-20 collets and intended for workshop and small-series production environments Facing and boring head set for versatile machining Suitable for diameters Ø10–Ø220 mm C-20 collet interface for broad tool compatibility Compact set weight 4 kg for easy handling Consistent bore quality through reliable alignment The set is designed to deliver reliable alignment and stable toolholding, which translates into improved repeatability across batches. With the C-20 collet interface, tool clamping is straightforward and compatible with a wide range of collet tooling, reducing changeover time. This mechanical compatibility supports faster set-up and lower machining overheads, making it a practical choice when consistent tolerances are required in facing and boring operations. Flexible diameter range for varied parts and fixtures A working range that covers Ø10–Ø220 mm enables the handling of small to medium bores without frequent retooling. This versatility is particularly beneficial in jobbing shops and maintenance departments where part dimensions vary. The configuration as a set simplifies inventory management: one compact package covers multiple applications, reducing the need for several specialised heads and helping to streamline workshop logistics. Compact handling and integration into existing toolholding Weighing 4 kg, the set is easy to manoeuvre while remaining robust during operation. The compact mass contributes to simpler mounting and improved balance in many spindle arrangements. For machinists seeking predictable results, the combination of modest weight and the C-20 collet standard ensures compatibility with common toolposts and taper systems, supporting smooth integration into existing machining centres and lathes. For tailored advice on specifying and sourcing the Vertex VBHC facing and boring head set, contact Metav Werkzeuge in Emmerich—our specialists provide practical guidance and fast supply for European workshops. Technical data SKU: VBHC-C20-BC3 GTIN: 4061905090967 ECLASS: 21041590 Facts Weight: 4 kg Diameter range: Ø10–Ø220 mm Collet type: C-20 Special features Facing and boring head set Compatible with C-20 collets Compact set for versatile workshop use FAQ What diameter range does the set cover? The VBHC facing and boring head set covers workpiece diameters from Ø10–Ø220 mm, allowing flexible use across small and medium bores. Which collet system is required? The set uses a C-20 collet interface; ensure collets and toolholders match the C-20 specification for secure clamping. Is the set suitable for series production? Yes, the VBHC set is designed for repeatable facing and boring tasks and suits small-series production where consistent alignment and quick set-ups are valued. How heavy is the complete set? The complete set weighs 4 kg, offering a practical balance between robustness and ease of handling. Does the set include both facing and boring heads? Yes, the VBHC is supplied as a set containing both facing and boring heads to cover the intended machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Face and Boring Head Automatic NT-30 Collet M12x1.75P - Vertex
Take advantage of the combination of automatic adjustment, a broad working range and NT-30 collet compatibility for consistent finishing and reduced setup times. Order the unit directly via Metav Werkzeuge or request tailored advice from our consultants. VBHU-206 Universal facing and boring head – automatic, NT-30, Ø5–Ø250 mm The VBHU-206 Universal facing and boring head is an automatic attachment designed for precision facing and internal boring on milling machines and vertical drilling centres, providing adaptable diametral control and reliable clamping for varied workshop tasks Automatic adjustment for consistent finishing Wide clamping range Ø5–Ø250 mm NT-30 collet compatibility for precision M12x1.75P mounting thread Faster, more consistent finishing for serial work The automatic regulation of cutting depth and feed contributes to repeatable surface quality across batches, reducing manual intervention and setup time. Where manual heads need continual adjustment, this unit keeps correction to a minimum, which benefits throughput and reduces scrap rates. The mechanism is engineered to maintain concentricity during facing and internal boring operations, so operators obtain uniform results without constant rechecking. This emphasis on operational efficiency addresses common production bottlenecks by enabling steady cycle times and predictable outputs. One head for a wide spectrum of diameters With an effective working envelope spanning Ø5–Ø250 mm and a dedicated Ø110 mm diameter option for vertical drilling, the head adapts to a broad range of component sizes. The large clamping range minimises the need for multiple tooling changes in shops processing mixed runs, which saves time and simplifies tooling logistics. Technical users benefit from clear diametral indexing and stable tool presentation, which supports precise material removal even on complex parts. The adaptability makes the head suitable for both individual repairs and repeated production tasks. Secure tool holding and simple mounting for minimal runout Compatibility with NT-30 collets ensures secure clamping of cutters and boring bars, reducing vibration and runout for improved hole geometry. The M12x1.75P mounting thread provides a standardised interface for fast installation on compatible machine spindles. Together these features deliver a consistent tool-to-work relationship, which is critical for maintaining tolerances and extending cutter life. The design targets dependable concentricity and ease of maintenance, helping workshops preserve tool accuracy across long production shifts. Designed for workshop reliability and straightforward integration Constructed to integrate into existing setups, the head balances robustness with manageable mass for handling and alignment—total mass: 6 kg—so installers can mount and position the unit without specialised lifting equipment. The build and feature set favour everyday industrial use: repeatable settings, quick collet changes and a compact footprint that fits standard tool holders. Backed by Vertex's manufacturing experience and Metav Werkzeuge’s supply chain, the component is well suited to small and medium-sized enterprises seeking reliable, precision tooling that simplifies process planning and reduces stoppages. For precise facing and boring tasks, contact Metav Werkzeuge for expert advice on the Vertex VBHU-206 and secure reliable supply from our Emmerich quality hub – eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: VBHU-206 GTIN: 4061905091285 Manufacturer: Vertex Facts Clamping range: Ø5–Ø250 mm Vertical drilling diameter: Ø110 mm Weight: 6 kg Mounting thread: M12x1.75P Special features Collet type: NT-30 Automatic regulation for facing and boring Suitable for integration on milling machines and vertical drills FAQ What diameters can be processed with this head? The VBHU-206 supports a working range of Ø5–Ø250 mm, with a dedicated Ø110 mm option for vertical drilling applications. Which collet system does the head use? The unit is designed for NT-30 collets to ensure secure tool clamping and reduced runout during facing and boring operations. Is the VBHU-206 suitable for series production? Yes, the automatic adjustment and broad diametral range make the head well suited to repetitive production, improving consistency and cycle times. How is the head mounted to a machine spindle? Mounting is via an M12x1.75P thread, offering a standardised connection for compatible machine spindles. Who manufactures this head and where can it be sourced? The head is produced by Vertex and can be supplied through Metav Werkzeuge for the European market Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Face And Boring Head Automatic, MT-5 Collet, M24x3.0P Thread - Vertex
Take advantage of the combination of automatic operation, broad diameter compatibility and MT-5 collet support for consistent machining results; order the unit directly via Metav Werkzeuge or contact our consultants for advice on integration with existing setups. Universal facing and boring head VBHU-204 — automatic, MT-5 collet (Vertex) The Universal facing and boring head VBHU-204 is an automatic machining head designed for precision facing and bore finishing across a wide diameter range, suitable for both horizontal and vertical applications. Automatic facing and boring operation Fits MT-5 collets Thread M24x3.0P for secure mounting Suitable Ø5–Ø250 mm and Ø110 mm vertical Increased throughput through precise, repeatable cuts The automatic mechanism delivers a steady feed that reduces manual intervention and increases cycle reliability. By maintaining a consistent cutting engagement the head lowers the risk of chatter and ensures uniform surface finishes, which benefits batch production and high-mix environments. The combination of automatic operation and rigid construction results in predictable outcomes and fewer rework cycles, improving overall shop-floor efficiency. Fast setup and wide compatibility for smoother workflows Compatibility with MT-5 collets and a standard M24x3.0P thread simplifies integration into common machine spindles and adapters. The head accepts diameters from Ø5–Ø250 mm, with a dedicated Ø110 mm option for vertical drilling, allowing rapid changeover between workpieces. Quick alignment and secure clamping reduce downtime during tool exchange, translating directly into shorter idle times on milling machines and lathes. Consistent performance under production conditions Weighing 7 kg, the unit balances solidity with manageable handling for assembly and maintenance. The robust mass helps to damp vibration during heavy cuts, while the construction supports fine adjustments for finishing operations. This stability is advantageous when reproducing tight tolerances or when producing multiple identical components, contributing to reproducible part quality across shifts. Practical benefits for maintenance and process planning The design focuses on serviceability and predictable behaviour rather than complex electronics, which simplifies in-house maintenance schedules and spare-part planning. Integration of this head into a machining cell can reduce the variety of special fixtures required, thereby simplifying inventory and enabling planners to forecast throughput with greater certainty. The result is a targeted improvement in lead times and process reliability for precision facing and boring tasks. For tailored advice on integrating the Vertex VBHU-204 into existing equipment and to discuss spindle compatibility, contact Metav Werkzeuge for specialist guidance from our Emmerich-based team. Technical data SKU: VBHU-204 GTIN: 4061905088964 Manufacturer: Vertex ECLASS: 21041590 Core specifications Collet type: MT-5 Thread: M24x3.0P Weight: 7 kg Suitable diameters: Ø5–Ø250 mm; Ø110 mm for vertical drilling Features and applications Automatic facing and boring operation Suitable for vertical drilling applications Designed for precision facing and bore finishing Compact handling weight for straightforward mounting FAQ What diameter range can be machined with this head? The head covers diameters from Ø5–Ø250 mm, with a dedicated Ø110 mm option for vertical drilling, enabling broad application on small to large bores. Which collet system does the unit use? The tool accepts MT-5 collets, making it compatible with machines and adapters designed for that collet standard. How is the unit mounted to the spindle? Mounting is via a M24x3.0P threaded connection; the VBHU-204 uses this common thread for secure attachment. Is the VBHU-204 suitable for production work? Yes. The automatic operation and robust construction are intended for consistent production cycles and reproducible finishes. What is the weight of the machining head? The head has a mass of 7 kg, providing damping benefits while remaining manageable for handling and maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing and Boring Head Automatic, BT40 Collet Holder M16x2.0P - Vertex
Take advantage of precise, repeatable facing and boring thanks to automatic operation and BT-40 taper compatibility, combined with robust mounting via the M16x2.0P thread. Order the Vertex VBHU-209 directly via Metav Werkzeuge or consult the team for specification support. Vertex VBHU-209 — Universal automatic facing and boring head, BT-40 The Vertex VBHU-209 is a universal automatic facing and boring head designed for precise finishing and versatile drilling applications in production workshops Automatic facing and boring operation BT-40 taper shank compatibility Fits Ø5–Ø250 mm; Ø110 mm for vertical use Consistent surface finish through automatic operation The VBHU-209 delivers automatic operation that reduces manual variation and maintains a uniform finish across batches. By automating the facing and boring sequence, the head ensures predictable cutting conditions and stable tool engagement, which translates into reduced rework and improved throughput. The mechanism is engineered for stable rotation and controlled feed, enabling reliable results even in routine production runs. For operations where cycle repeatability and surface quality matter, this head supports consistent outcomes with minimal intervention. Broad machine compatibility for flexible workshop use Equipped with a BT-40 taper interface, the head is compatible with a wide range of machining centres that accept BT-40 tooling. The design supports standard mounting and straightforward replacement of tooling systems, allowing integration into existing tool sets without extensive modification. Its suitability for bore diameters from Ø5–Ø250 mm and a dedicated Ø110 mm option for vertical drilling means the unit covers a wide application spectrum, reducing the need for multiple specialised heads and simplifying tool management. Stable fastening and simple setup for reliable cycles The unit is fitted with a M16x2.0P thread for secure attachment and quick alignment in the spindle, delivering mechanical rigidity during cutting. With a compact mass of 6.9 kg, the head balances robustness with manageable handling during tool changes. The combination of secure thread mounting and BT-40 taper support reduces runout and vibration, improving tool life and dimensional accuracy of finished parts. Clear mechanical interfaces shorten setup time and make the head well suited for repetitive production tasks. Practical advantages and material range The VBHU-209 is designed to assist in a variety of finishing operations where predictable results and tool stability are essential. Its configuration supports standard facing and boring inserts used in metalworking and general machining tasks, enabling efficient surface removal and diameter finishing. Because the head interfaces with widely used tooling standards, operational downtimes are reduced and replacement parts remain accessible through established supply channels. Contact Metav Werkzeuge to discuss how the Vertex VBHU-209 can be specified for current production needs; Metav’s specialists in Emmerich provide tailored advice and fast, transparent delivery from stock — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data Article number: VBHU-209 GTIN: 4061905093548 Manufacturer: Vertex Facts Weight: 6.9 kg Thread: M16x2.0P Taper: BT-40 Special features Automatic facing and boring function Suitable for Ø5–Ø250 mm and Ø110 mm for vertical drilling Model category: Universal facing and boring head FAQ What machine taper does this head use? The Vertex VBHU-209 uses a BT-40 taper shank for spindle mounting and toolholder compatibility. Which bore diameters can be processed with this head? The unit is suitable for bore work from Ø5–Ø250 mm, with a specific provision for Ø110 mm in vertical drilling applications. How is the head fixed to the spindle? The head is secured using an M16x2.0P thread and the BT-40 interface to ensure stable mounting and reduced runout. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing And Boring Head Automatic, C-20 Collet Compatible - Vertex
Benefit from precise diameter control, broad machining range and robust C‑20 collet compatibility for dependable finishing and boring operations. Order the VBHU-214 directly via Metav Werkzeuge or ask our consultants if needed. VBHU-214 Universal Automatic Facing and Boring Head — C‑20 Collet, Ø5–Ø250 mm The VBHU-214 is an automatic universal facing and boring head designed for flexible diameter machining and vertical drilling applications Automatic universal facing and boring head Suitable for Ø5–Ø250 mm diameters Compatible with C‑20 collet system Ready for vertical drilling Ø110 mm Consistent diameter control for accurate finishing The unit delivers repeatable precision across a wide diameter range, making it suitable for both roughing pre-operations and fine finishing passes. The automatic design reduces manual intervention and supports steady tool engagement, which improves concentricity and reduces rework. For machinists requiring reliable surface quality, the head’s configuration translates into shorter cycle times and fewer corrective operations while maintaining dimensional tolerances. Flexible clamping and quick setup with C‑20 compatibility Designed around the C‑20 collet interface, the head enables quick tool changes and stable clamping for assorted tool shanks. The compact mass of 6 kg provides a balance between rigidity and manageable handling during setup. The option to work with vertical drilling at Ø110 mm expands application scope, allowing the same unit to serve varied tasks on conventional and CNC machines without complex retooling. Automated operation that increases throughput Automation in the head supports more consistent cutting parameters and reduces operator variability, which is advantageous for serial production and precision components. The automatic function fosters process reliability and can contribute to improved machine utilisation. When combined with routine maintenance and correct setup, the head helps achieve a predictable production flow and contributes to lower scrap rates in small and medium batch runs. Contact Metav Werkzeuge today to discuss specification options for the VBHU-214 and arrange technical advice from our Emmerich team, including collet choices and integration guidance. Technical data Article number: VBHU-214 GTIN: 4061905094170 Manufacturer: Vertex Core specifications Weight: 6 kg Diameter range: Ø5–Ø250 mm Vertical drilling capacity: Ø110 mm Special features Automatic operation Compatible collet: C‑20 Universal facing and boring capability FAQ What diameter range does the head cover? The VBHU-214 supports a diameter range of Ø5–Ø250 mm, suitable for a wide variety of facing and boring tasks. Is the head compatible with standard collet systems? Yes, the unit is compatible with the C‑20 collet system as supplied, enabling straightforward tool clamping and exchange. Can the head be used for vertical drilling operations? The head is suitable for vertical drilling activities and supports Ø110 mm for vertical bores as specified. How heavy is the unit and what does that mean for setup? The head weighs 6 kg, offering a compromise between rigidity for machining and ease of manual handling during machine mounting. Does the automatic function improve batch production? The automatic operation of the head promotes process consistency, which helps increase throughput and reduce variability in serial production. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing and Boring Head Automatic, C-25 Collet Compatible - Vertex
Take advantage of the combination of automatic operation, a wide machining range Ø5–Ø250 mm, and compatibility with C-25 collets for precise facing and boring tasks. Order the unit directly via Metav Werkzeuge or contact our consultants for configuration advice. VBHU-210 — Automatic universal facing and boring head by Vertex A VBHU-210 automatic universal facing and boring head designed for versatile machining of diameters from Ø5–Ø250 mm, with a specific capability for vertical drilling to Ø110 mm Automatic operation for consistent results Compatible with C-25 collets for standard tooling Wide diameter range Ø5–Ø250 mm Robust design at 4.5 kg for machine stability Precision and adaptability for varied machining tasks The automatic universal facing and boring head delivers consistent precision across a broad diameter range, reducing the need for frequent tool changes. With an adjustable working range that covers Ø5–Ø250 mm, the unit streamlines processes where both facing and internal boring are required. The automatic mechanism maintains concentricity during feed, which improves surface finish and reduces secondary machining. This approach minimises setup time and supports reliable cycle times on serial and single-part production runs. Compatibility with standard toolholders and machine spindles Designed for compatibility with standard tooling systems, the head accepts C-25 collets, simplifying integration into existing tool inventories and reducing the need for bespoke adapters. The compact mass of 4.5 kg helps to preserve spindle dynamics while providing sufficient mass for stable cutting behaviour. The head’s configuration includes a dedicated range for vertical drilling to Ø110 mm, enabling vertical spindle operations without additional modification. These characteristics make the unit suitable for retrofitting to conventional milling machines and for use on CNC platforms where standard collets are preferred. Durable design and dependable supply chain partnership Manufactured by Vertex, the head reflects established engineering practices and quality control suitable for industrial use. Metav Werkzeuge acts as a reliable distribution partner, combining a broad product range with a local quality filter in Emmerich; this supports consistent supply and reduces procurement complexity. The product’s straightforward mechanical concept contributes to robust long-term behaviour in workshop conditions, while clear technical specifications assist planning for fixtures, balancing and spindle load calculations. For buyers seeking efficient, repeatable machining solutions, the head offers a balanced mix of adaptability and mechanical reliability. Contact Metav Werkzeuge for tailored configuration and delivery options for the VBHU-210 automatic facing and boring head by Vertex Technical data Article number: VBHU-210 GTIN: 4061905092718 Brand: Vertex Facts Weight: 4.5 kg Diameter range: Ø5–Ø250 mm Vertical drilling capability: Ø110 mm Collet type: C-25 ECLASS: 21041590 Special features Automatic universal facing and boring head Suitable for vertical drilling setups SKU: VBHU-210 Manufacturer: Vertex FAQ What diameter range does the head cover? The VBHU-210 covers diameters from Ø5–Ø250 mm and includes a dedicated capability for vertical drilling to Ø110 mm. Which collet system is required for installation? The unit uses C-25 collets, ensuring compatibility with widely used collet tooling systems. Is the VBHU-210 an automatic device? Yes. The VBHU-210 is an automatic universal facing and boring head manufactured by Vertex, designed for consistent, repeatable operation. What is the unit weight and why does it matter? The head weighs 4.5 kg; this mass contributes to machining stability while remaining compatible with standard spindle load limits. Can the head be integrated into CNC milling machines? The VBHU-210 is designed for integration with conventional and CNC milling setups and supports vertical drilling applications as specified. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing and Boring Head Automatic, M12x1.5 Thread, MT-3 Collet Capacity - Vertex
Precision machining benefits from the combination of automatic facing and boring control and broad diameter compatibility (Ø5–Ø250 mm and Ø110 mm for vertical drilling). The MT‑3 collet interface together with an M12x1.5P mounting thread delivers straightforward integration and reliable repeatability. Order the Universal facing and boring head VBHU-202 directly via Metav Werkzeuge or ask our consultants if needed Universal facing and boring head VBHU-202 — automatic, MT‑3 collet, M12x1.5P (Vertex) The Universal facing and boring head VBHU-202 is an automatic machining unit designed for precision facing and internal turning on vertical drills and milling machines, providing broad diameter coverage and a compact mounting interface Automatic facing and boring function Compatible with MT-3 collets Thread M12x1.5P for standard mounting Suitable Ø5–Ø250 mm; Ø110 mm vertical Consistent finishes with less setup time The VBHU-202 delivers precision where surface quality and concentricity matter. Its automatic adjustment mechanism reduces manual re-setting between operations, which leads to fewer rework cycles and a steadier process flow. For shops that alternate between facing and boring tasks, this results in a measurable increase in throughput while maintaining consistent end-face flatness and bore concentricity. The unit is optimised to reduce operator corrections and to keep cycle times predictable. Straightforward machine compatibility to reduce adapters Built for straightforward integration, the unit uses an MT‑3 taper for collet retention and a M12x1.5P thread for mounting, allowing direct fitting to many common machine spindles and adaptors. The specified working range of Ø5–Ø250 mm and a dedicated Ø110 mm option for vertical drilling covers a wide array of components without repeated tool changes. Clear mechanical interfaces simplify setup and keep toolholding precise, which supports repeatable results across batch production. Stability and workshop versatility for reliable operation With a mass that contributes to stability during cutting, the head offers damping that helps to avoid chatter and to extend cutter life. The design focuses on robust construction and practical operability so that facing and boring tasks can be carried out with minimal interruption. Versatility is a core advantage: the unit adapts to both finishing and medium-duty material removal, enabling workshops to consolidate tooling and reduce changeover frequency while maintaining machining quality. Contact Metav Werkzeuge for specification advice on Vertex automatic facing and boring heads and arrange prompt supply from our Emmerich warehouse Technical data SKU: VBHU-202 GTIN: 4061905084515 Manufacturer: Vertex Machinery Works Co., Ltd. EClass: 21041590 Facts Weight: 6 kg Compatible diameters: Ø5–Ø250 mm; Ø110 mm for vertical drilling Thread: M12x1.5P Collet type: MT-3 Special features Automatic facing and boring function Suitable for vertical drilling Brand: Vertex Image assets available (product and detail views) FAQ Is the head compatible with MT‑3 collet systems? Yes. The VBHU-202 is specified for use with MT‑3 collets, providing a standard Morse taper interface for common tooling and holders. What diameter range can be machined with this head? The unit covers a working range of Ø5–Ø250 mm for general facing and boring, with a dedicated Ø110 mm option intended for vertical drilling applications. Which mounting thread is required for installation? Mounting is via an M12x1.5P thread, allowing direct attachment to machines and adaptors designed for this standard pitch. Is the head suitable for both facing and internal boring operations? Yes. The VBHU-202 is designed as a universal facing and boring head, enabling both external face machining and internal turning tasks with the same unit. How does the head help reduce vibration and improve tool life? The unit’s mass and construction contribute to stability during cutting, which dampens vibration, reduces chatter risk and supports longer cutter life under normal operating conditions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing And Boring Head Automatic, M16x2.0P Thread, NT-40 Collet – Vertex
Take advantage of the combination of automatic operation, broad diameter compatibility and robust mounting for reliable facing and boring tasks. Benefit from time-saving integration and stable performance by ordering via Metav Werkzeuge or consulting the Metav team for application advice. VBHU-207 Universal facing and boring head (automatic) by Vertex — NT-40, M16x2.0P The VBHU-207 is an automatic universal facing and boring head designed for precision machining across a wide diameter range on NT-40 tool systems. Automatic operation for continuous cycles Compatible with NT-40 collet systems Mounting thread M16x2.0P for stable fit Suitable diameters Ø5–Ø250 mm and Ø110 mm Faster throughput through automatic facing and boring The VBHU-207 combines broad range capability with automatic functionality to reduce manual intervention and shorten cycle times. Its capacity for Ø5–Ø250 mm work and the dedicated Ø110 mm option for vertical drilling means fewer tool changes and less downtime. The result is measurable efficiency: a single head covering many diameters simplifies job planning and improves spindle utilisation, which supports leaner production workflows and consistent output quality. Stable mounting and compatibility for consistent surface quality Integration is straightforward thanks to the NT-40 collet interface and the M16x2.0P mounting thread. The NT-40 specification ensures compatibility with common toolholder systems, while the secure thread connection contributes to reduced run-out and improved precision. At a mass of 6.2 kg, the unit provides inherent rigidity that helps to damp vibration and produce a superior surface finish during facing and light boring operations on milling machines and machining centres. Practical applications and service-minded supply Designed for routine facing and finishing operations, the head supports varied production requirements where a compact, automatic solution is preferred. The straightforward design reduces maintenance complexity and makes wear checks simple during scheduled servicing. For procurement and supply security, Metav Werkzeuge acts as a reliable partner: decades of precision experience, a broad catalogue and a central European stock ensure dependable delivery and technical guidance for workshop integration. Contact Metav Werkzeuge for tailored application advice and to source the Vertex VBHU-207 automatic facing and boring head directly from Metav's Emmerich location Technical data Article number: VBHU-207 GTIN: 4061905091162 Brand: Vertex Product type: Universal facing and boring head Facts Weight: 6.2 kg Suitable diameters: Ø5–Ø250 mm Vertical drilling option: Ø110 mm Mounting thread: M16x2.0P Special features Collet type: NT-40 Operation: automatic ECLASS: 21041590 FAQ What machines is this head compatible with? The VBHU-207 is designed for machine spindles and toolholders that accept the NT-40 interface and can be mounted via the M16x2.0P thread for stable operation. Which diameter range can be machined with this head? The unit covers a broad working range from Ø5–Ø250 mm, with a specific provision for Ø110 mm in vertical drilling setups. How is the head mounted to the machine? Mounting is achieved using the M16x2.0P thread combined with NT-40 collet compatibility to ensure a secure and accurate connection. Does the weight of 6.2 kg affect performance? At 6.2 kg, the mass contributes to rigidity and helps reduce vibration, which benefits surface finish and dimensional stability during facing and boring. Is this suitable for fully automated production lines? The automatic operation of the VBHU-207 supports reduced manual intervention and can be integrated into automated workflows where NT-40 tool systems and the specified spindle interfaces are used. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing and Boring Head Automatic, M24x3.0P, NT-50 Collet Mount - Vertex
Take advantage of the combination of automatic operation, broad diameter coverage and secure NT-50 clamping for consistent cycle times and reliable bore finishes. Order the Vertex VBHU-208 via Metav Werkzeuge or ask our consultants for application guidance. Universal facing and boring head VBHU-208 — automatic head for internal and face boring with NT-50 compatibility A Universal facing and boring head VBHU-208 designed for automatic facing and internal boring tasks, offering wide diameter coverage and robust mounting for stable machining across varied production environments Automatic facing and internal boring Compatible with NT-50 collets Diameter range Ø5–Ø250 mm, Ø110 mm vertical Thread M24x3.0P for direct mounting Increase throughput with automatic facing and precise bore control The VBHU-208 delivers automatic feed capability that reduces manual intervention and shortens cycle times, making it suitable for repetitive production and batch work. Built to maintain consistent cutting geometry, the head improves precision at the tool tip and reduces the need for rework. Because automatic indexing and adjustment are integrated, set-up times are minimised, supporting higher spindle utilisation and more predictable production planning. Versatile diameter coverage and secure clamping for fewer tool changes With a working range of Ø5–Ø250 mm and an additional Ø110 mm option for vertical drilling, the unit covers a wide spectrum of internal and face-boring tasks. The use of NT-50 collets provides stable, concentric clamping that helps to preserve bore accuracy and surface finish, especially under interrupted cuts. This versatility reduces tool change frequency and supports flexible job runs where different bore sizes are required on the same workpiece. Straightforward integration and a robust design for everyday use The head mounts via a M24x3.0P thread and presents a compact, weight-conscious design at 8.5 kg, facilitating secure attachment and straightforward handling during machine set-up. Combining a durable build with careful tolerancing, the unit offers long-term dimensional stability and dependable performance in busy workshops. Supplied by a reputable brand, the construction emphasises compatibility with standard machining spindles and practicality for routine production. Contact Metav Werkzeuge for tailored technical advice and procurement of the Vertex VBHU-208; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and reliable delivery from Emmerich. Technical data Article number: VBHU-208 GTIN: 4061905093159 Manufacturer: Vertex Facts Weight: 8.5 kg Working diameter range: Ø5–Ø250 mm Vertical drilling option: Ø110 mm Mounting thread: M24x3.0P Collet type: NT-50 eClass: 21041590 Special features Automatic facing and boring function Compatible with NT-50 collets Designed for internal boring and facing Robust construction for production use FAQ What machining tasks is this head best suited for? The Vertex VBHU-208 is intended for automatic facing and internal boring operations where broad diameter coverage and repeatable results are required. Which collet system does the head use and why does it matter? The head uses an NT-50 collet system; this provides stable, concentric clamping that helps maintain bore accuracy and surface finish during machining. How is the head mounted to the machine spindle? Mounting is via a M24x3.0P thread, offering a direct and secure connection compatible with machines prepared for threaded accessory mounting. Does the VBHU-208 cover very small and large diameters? Yes, the unit supports a working diameter range of Ø5–Ø250 mm and includes a Ø110 mm option for vertical drilling applications. Is the head suitable for high-production environments? The combination of automatic operation, robust design and NT-50 clamping makes the head suitable for repetitive production and batch machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing And Boring Head Automatic, R-8 Collet Compatible - Vertex
The combination of automatic operation, R-8 collet compatibility and a wide machining range (Ø5–Ø250 mm) delivers reliable facing and boring performance while maintaining setup efficiency; order the VBHU-205 directly via Metav Werkzeuge or consult the team for application advice. VBHU-205 Universal Automatic Facing and Boring Head — R-8 Collet Compatibility VBHU-205 is an automatic universal facing and boring head designed for versatile shop-floor machining and vertical drilling applications Automatic facing and boring operation Compatible with R-8 collets For diameters Ø5–Ø250 mm and Ø110 mm vertical Solid 6.2 kg construction for stability Consistent precision for productive finishing The head provides repeatable accuracy for facing and boring operations, converting conventional spindle power into steady, true cuts. Its automatic mechanism reduces manual fine adjustments and helps maintain concentricity across multiple components, which supports higher throughput on repetitive tasks. By combining a broad diameter capability with precise tool control, the unit reduces rework and contributes to predictable cycle times, an important factor for production planning and cost-efficiency. Fast changeovers and secure tool holding Designed for compatibility with R-8 tool-holding systems, the device simplifies integration into existing machining setups and shortens fixture time. The R-8 interface ensures a secure connection between spindle and head, lowering the risk of play and runout during heavy cutting. The robust 6.2 kg construction contributes to dampening vibrations, improving surface finish when facing or boring. This combination of reliable clamping and mass leads to fewer interruptions and a smoother workflow for workshop technicians and engineers. Broad application range with stable operation With a machining range from Ø5–Ø250 mm and a designated Ø110 mm option for vertical drilling, the head adapts to both small-diameter precision work and larger facing tasks. The universal design supports use across a variety of materials and part sizes where standard tooling cannot achieve the same flexibility. Emphasis on mechanical robustness and clear specification assists process planners in matching the head to appropriate jobs, thereby reducing trial-and-error and shortening time-to-production. Built for integration and dependable results Engineered by a reputable manufacturer, the unit fits into established tooling ecosystems and supports consistent delivery of finished components. The automatic functionality is particularly beneficial where repeatability and reduced operator intervention are priorities, aligning with lean manufacturing objectives. Confidence in component quality and stable performance helps teams focus on process optimisation rather than frequent fixture adjustments. For precision facing and boring solutions, contact Metav Werkzeuge to discuss the VBHU-205 and arrange procurement or technical consultation from our Emmerich-based experts Technical data Article number: VBHU-205 GTIN: 4061905090530 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Weight: 6.2 kg Diameter range: Ø5–Ø250 mm Vertical drilling: Ø110 mm Collet type: R-8 Special features Automatic operation Universal facing and boring functionality Suitable for vertical drilling Robust construction FAQ What machining range does the head cover? The VBHU-205 covers a diameter range of Ø5–Ø250 mm and includes a Ø110 mm configuration for vertical drilling applications. Is the head compatible with my R-8 spindle? Yes, the VBHU-205 is designed for R-8 collet systems, ensuring straightforward integration with compatible spindles. Does the unit support heavy-duty facing operations? The head’s solid construction and secure R-8 clamping deliver stable performance suitable for demanding facing and boring tasks. How does automation benefit production with this head? Automatic control reduces manual adjustment, increases repeatability and shortens cycle times for serial finishing operations. Who manufactures the VBHU-205? The head is produced by Vertex, a recognised manufacturer of precision tooling and accessory equipment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing and Boring Head Automatic, SK-40 Collet Mount - Vertex
Combine automatic operation with wide diameter compatibility and proven SK‑40 mounting for a reliable machining attachment; the robust M16x2.0 thread and compact 5.6 kg mass make set-up and handling efficient. Order the VBHU‑211 via Metav Werkzeuge or contact our consultants for application advice. VBHU-211 Universal Automatic Facing and Boring Head (SK‑40, M16x2.0) by Vertex The VBHU-211 is a universal, automatic facing and boring head designed for flexible workshop use, enabling precise machining across a broad diameter range. Automatic operation for efficient machining Suitable for Ø5–Ø250 mm and Ø110 mm vertical drilling SK-40 collet compatibility M16x2.0 thread connection for secure mounting Precision for variable diameters that improves throughput The attachment delivers consistent precision across a broad working range, handling diameters from Ø5–Ø250 mm and providing a dedicated Ø110 mm option for vertical drilling applications. Its design reduces re‑alignment time between operations, which supports higher machine utilisation and fewer interruptions. By translating the head’s mechanical accuracy into repeatable face and bore finishes, the assembly minimises rework and keeps cycle times predictable for batch and single‑piece production. Secure mounting and quick changeovers cut setup time Compatibility with the SK‑40 collet system and the M16x2.0 thread connection ensures a firm, concentric interface with most vertical and horizontal machining spindles. The compact mass of 5.6 kg simplifies handling while preserving rigidity during cutting. Explained for non‑specialists: SK‑40 denotes the taper/collet standard used for secure tool mounting, while the M16x2.0 thread provides the axial lock; together they create a reliable mechanical link that reduces run‑out and shortens the time between tool changes. Automatic functionality that supports continuous production The automatic character of the head enables smooth adjustments during machining, reducing the need for manual intervention. This capacity translates into a rational productivity gain: fewer stoppages, faster changeovers and a more consistent quality level across repeated workpieces. The design emphasises operational reliability and process stability, making it suitable where continuous throughput and predictable finishing are priorities. Easy integration into existing setups and straightforward handling The universal layout allows straightforward integration into diverse machining environments without complex retrofitting. The unit’s concise specification and standardised interfaces mean straightforward compatibility checks during planning. For procurement and production teams this reduces integration risk and shortens lead times for commissioning. The attachment’s practical form factor also eases storage and transport within the workshop, supporting a tidy, efficient workplace. For technical evaluation or to arrange supply of the VBHU‑211 from Vertex, contact Metav Werkzeuge for personalised advice and delivery from our Emmerich facility Technical Data Article number: VBHU-211 GTIN: 4061905092848 Manufacturer: Vertex ECLASS: 21041590 Core specifications Weight: 5.6 kg Suitable diameters: Ø5–Ø250 mm Vertical drilling diameter: Ø110 mm Thread: M16x2.0P Collet type: SK-40 Special features Automatic operation Category: Vertex Product type: Universal facing and boring head SKU: VBHU-211 FAQ What diameter range can be machined with this head? The VBHU‑211 covers a working range of Ø5–Ø250 mm and includes a specific Ø110 mm capacity for vertical drilling applications. Which mounting standards are required for installation? The unit uses an SK‑40 collet interface together with an M16x2.0 thread for secure attachment and concentricity. Is the VBHU‑211 suitable for continuous production lines? Yes, the automatic operation of the VBHU‑211 supports continuous use by reducing manual adjustments and improving process stability. How heavy is the assembly for handling and set‑up planning? The complete head weighs 5.6 kg, which eases handling while maintaining the rigidity required for precise machining. Who manufactures the VBHU‑211 and what is the SKU? The VBHU‑211 is produced by Vertex; the SKU is VBHU‑211 and the GTIN is 4061905092848. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Facing And Boring Head Automatic, SK-50 Collet Shank, M24x3.0 Thread - Vertex
Benefit from automatic operation, SK-50 collet compatibility and a wide diameter range for reliable, repeatable facing and boring. Order the Universal facing and boring head VBHU-212 directly via Metav Werkzeuge or ask our consultants if needed. Universal facing and boring head VBHU-212 — automatic, SK-50 collet compatible The Universal facing and boring head VBHU-212 is an automatic machining head designed for precision facing and boring tasks on milling machines and vertical drilling centres. Automatic operation for consistent machining Compatible with SK-50 collet holders M24×3.0P mounting thread for stable fitting Suitable for diameters Ø5–Ø250 mm and Ø110 mm vertical Faster, more consistent machining throughput The automatic drive and balanced construction deliver consistent repeatability and reduce manual intervention during facing and boring operations. By standardising feed behaviour, cycle times are shortened and scrap rates fall, which supports a measurable improvement in production efficiency. The head's design focuses on stable toolholding and predictable performance, making it suitable for medium- to high-volume runs where process stability and throughput matter. Robust mounting and machine compatibility for secure operation Designed with a M24×3.0P mounting thread and compatibility with SK-50 collets, the head integrates with common toolholding systems for rapid set-up and secure clamping. The unit's mass contributes to vibration damping and steadier cuts while the specified interfaces ensure straightforward installation in typical milling spindles and boring setups. The robust mounting reduces runout and helps maintain surface quality when finishing internal bores and faces. Wide diameter capability for versatile workshop use Supporting a machining range of Ø5–Ø250 mm for standard operations and Ø110 mm for vertical drilling applications, the head covers a broad spectrum of component sizes. This versatility reduces the need for multiple specialised heads and enables economical tool utilisation across varied jobs. The combination of facing and boring functionality in one device also simplifies tooling logistics and speeds process changeovers on the shop floor. Contact Metav Werkzeuge today to discuss the Vertex VBHU-212 and secure tailored advice from our consultants in Emmerich for precision machining solutions. Technical Data Article number: VBHU-212 GTIN: 4061905096242 Manufacturer: Vertex SKU: VBHU-212 Facts Weight: 8.3 kg Mounting thread: M24×3.0P Compatible collet type: SK-50 Diameter range: Ø5–Ø250 mm; Ø110 mm for vertical drilling Special features Automatic operation Universal facing and boring functionality Suitable for vertical drilling applications eClass: 21041590 FAQ What diameter range can be machined with this head? The VBHU-212 supports a diameter range of Ø5–Ø250 mm for standard operations and Ø110 mm specifically for vertical drilling applications. Which collet interface is required for mounting? The head is compatible with SK-50 collet holders, ensuring secure clamping with industry-standard toolholders. What mounting thread does the head use? Mounting is achieved via an M24×3.0P thread to provide a stable connection to the machine spindle or adapter. Is this head suitable for finishing operations? Yes, the design emphasises stability and low runout, making it suitable for finishing and precise boring tasks where surface quality matters. How heavy is the unit and what does that imply for use? The head weighs 8.3 kg, which contributes to vibration damping and steadier cutting processes for improved surface finish and repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5-Ø250mm Universal Planing and Boring Head Automatic, MT-4 Collet, M16x2.0 Thread - Vertex
Take advantage of the automatic operation, broad working diameter range and secure MT-4 mounting to streamline finishing and boring tasks. Benefit from robust M16×2.0P mounting and compact weight for stable performance on conventional spindles. Order the unit directly via Metav Werkzeuge or ask the consultants for tailored application advice. Universal facing and boring head VBHU-203 — automatic, MT-4 taper (Vertex) A Universal facing and boring head VBHU-203 designed for automatic finishing and adaptable diameter work on MT-4 taper spindles. Automatic feed for consistent finishing Compatible with MT-4 taper spindles M16×2.0P thread for secure mounting Working diameters Ø5–Ø250 mm and Ø110 mm Consistent surface quality through automatic operation The automatic operation ensures a uniform finish across repeated workpieces, reducing rework and saving machining time. Built for process reliability, the head converts cutting parameters into predictable outcomes, improving throughput on production runs. The design emphasises repeatability and stability, which minimises setup adjustments and supports a steady workflow in job shops and small series production. Secure mounting and quick setup for reduced downtime Designed for MT-4 taper spindles and a M16×2.0P mounting thread, the unit provides a compact, mechanically robust attachment that shortens machine downtime during tool changes. The configuration supports fast installation while maintaining concentricity, lowering the margin for error in facing and boring tasks. The relatively light weight contributes to handling ease without compromising stability during cutting operations. Wide diameter coverage to limit tool changes Covering Ø5–Ø250 mm and with a dedicated Ø110 mm option for vertical drilling scenarios, the head reduces the need for multiple single-purpose tools. The broad range suits versatile workshop environments where setup time and inventory complexity must be kept to a minimum. By consolidating facing and boring operations into one tool family, process planners can simplify tooling strategies and improve throughput. Built to integrate with existing machining fleets The head’s universal concept supports integration into a variety of conventional machines equipped with MT-4 spindles. Constructed for dependable daily use, the unit is an efficient addition to workcells that prioritise predictable performance and ease of calibration. For precision-dependent tasks, the combination of repeatability, secure mounting and automatic feed translates into measurable productivity gains. Contact Metav Werkzeuge in Emmerich for application advice or to order the Vertex VBHU-203 universal facing and boring head; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VBHU-203 GTIN: 4061905088698 Brand: Vertex Type: Automatic universal facing and boring head Core data Weight: 6.3 kg Working diameter: Ø5–Ø250 mm; Ø110 mm for vertical bores Thread: M16×2.0P Taper: MT-4 Special features Automatic operation Universal facing and boring function Suitable for vertical drilling applications Compatible with MT-4 taper spindles FAQ What machine taper is required for mounting this head? The head mounts on machines with an MT-4 taper; the VBHU-203 is designed for secure fitting to MT-4 spindles. Which diameter range does the head cover? Working coverage is Ø5–Ø250 mm, with a dedicated Ø110 mm option specified for vertical drilling situations on the VBHU-203. How is the head secured to the spindle? The unit uses an M16×2.0P mounting thread combined with the MT-4 taper to provide a secure and concentric attachment. Is the head suitable for repetitive production work? Yes; the automatic feed and focus on repeatability make the head suitable for series production and tasks that demand consistent surface quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø5–Ø250mm Universal Facing and Boring Head Automatic, BT-50 Collet, M24x3.0P Thread - Vertex
Benefit from a blend of automatic operation and broad diameter compatibility for consistent facing and boring results; the robust BT-50 compatibility and secure M24x3.0P mounting deliver process reliability. Order the VBHU-213 directly via Metav Werkzeuge or consult our specialists for application advice. VBHU-213 Universal facing and boring head, automatic (Vertex) A versatile automatic VBHU-213 universal facing and boring head for precision machining and vertical drilling applications. Automatic operation for consistent cut Compatible with BT-50 collets Thread M24x3.0P for secure mounting Suitable for Ø5–Ø250 mm and Ø110 mm drilling Consistent machining through automatic control The automatic feed mechanism of this universal boring head ensures repeatable facing and boring cycles, reducing setup variation and manual trimming. By maintaining a steady feed, the unit delivers a uniform surface finish and helps shorten cycle times. For workshops aiming to increase throughput without sacrificing accuracy, the combination of automatic operation and a well-balanced cutter head translates into fewer reworks and predictable production runs. Wide diameter range for flexible part programmes Designed to cover a broad working scope, the head accommodates diameters from Ø5–Ø250 mm, with additional capability for Ø110 mm in vertical drilling scenarios. This large span minimises tool changes across varying workpieces and supports mixed-batch production. The versatility of the unit makes it suitable for operations that require both small-diameter finishing and medium-size boring, enabling efficient use of machine time and tooling resources. Secure integration with existing toolholders and machines Compatibility with BT-50 collets and the M24x3.0P thread provides secure and repeatable mounting, simplifying retrofits into standard machining centres. The collet interface is an industry-established system that facilitates quick tool exchanges while maintaining concentricity. Clear specification of the mounting thread and collet type assists in planning spindle adaptors or toolholder investments and reduces uncertainty during integration into existing setups. Robust design for stable performance and serviceability Constructed for industrial use, the head offers a solid feel and balanced mass for vibration damping in high-precision tasks. The unit’s weight contributes to stability during cutting, supporting consistent tolerances and improved surface quality. Routine inspection points are straightforward, enabling maintenance teams to keep the head in optimal condition with minimal downtime. The practical design supports long production runs and contributes to dependable shop-floor performance. For reliable, automatic facing and boring operations choose the Vertex VBHU-213—contact Metav Werkzeuge in Emmerich for an application review or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: VBHU-213 Manufacturer: Vertex GTIN: 4061905094163 Facts Weight: 9.7 kg Diameter range: Ø5–Ø250 mm Vertical drilling diameter: Ø110 mm eClass: 21041590 Special features Automatic operation Collet type: BT-50 Thread: M24x3.0P SKU: VBHU-213 FAQ What diameter range does the head cover? The VBHU-213 supports a working diameter range of Ø5–Ø250 mm and offers an option for Ø110 mm in vertical drilling applications. Which collet system is required for mounting? Mounting and tool retention use the BT-50 collet standard; the VBHU-213 is designed for compatibility with BT-50 toolholders. Is the unit suitable for automatic operation in series production? Yes, the VBHU-213 features automatic operation to ensure consistent feed and repeatable facing and boring cycles for series production. What thread is used for secure mounting? The head uses an M24x3.0P thread for secure attachment to compatible spindles or adaptors. Who manufactures this facing and boring head? The VBHU-213 is manufactured by Vertex and is supplied under the Vertex brand for industrial machining applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Precision boring heads and taper adaptors for milling operations
Boring heads and taper adaptors are essential components for producing precise, round bores on conventional milling machines. The two product groups are related but distinct: boring heads deliver adjustable, high-precision internal diameters, while taper adaptors provide the correct machine interface and secure tool holding.
How they work in typical workshop and production settings
Boring heads are mounted on milling spindles and adjusted to cut exact diameters, enabling bores with defined fits to be produced on standard machine tools. Taper adaptors ensure compatibility with the machine taper and maintain concentricity under load. For larger diameters, boring bars are fitted into the boring head, allowing stepwise or single-pass enlargement while preserving roundness and surface quality.
Tangible benefits for daily machining
- Increased hole accuracy and repeatability through fine adjustment of boring heads
- Capability to produce large-diameter bores on conventional milling machines, reducing the need for specialised equipment
- Flexible setup: boring heads accept interchangeable boring bars for different diameters and tasks
- Reduced rework and improved fit quality when mating components are required
- Simple integration with standard machine tapers via taper adaptors, improving changeover speed
Why Metav is the pragmatic choice for procurement
Metav positions itself as a precision partner for industry and workshops, combining decades of competence with a broad range of products. From the central hub in Emmerich, Metav offers a curated selection that acts as a quality filter for the European market, supported by more than 48,000 customers and an assortment of over 250,000 products. That combination makes Metav a practical source when standard-compliant boring heads and taper adaptors are required quickly and reliably.
technical data (key points)
- designed for use on milling machines
- produces precise, round bores with defined fits
- suitable for conventional machine tools to create bores with large diameters
- accepts appropriate boring bars depending on application
- taper adaptors provide machine taper interface and toolholding accuracy
Essential takeaway
Boring heads and taper adaptors together enable conventional milling machines to produce accurate, fit-quality bores and handle large diameters with flexibility and repeatability. Metav supplies a broad, quality-filtered range to simplify sourcing and reduce procurement complexity.
FAQ
What are boring heads and taper adaptors used for?
Boring heads are used to produce adjustable, accurate internal diameters; taper adaptors provide the matching machine taper and secure mounting for the boring head.
Can boring heads create large-diameter bores on a milling machine?
Yes—boring heads are designed to enlarge holes to larger diameters on conventional milling machines, often by fitting longer or larger boring bars into the head.
How are boring bars fitted into a boring head?
Depending on the application, appropriate boring bars are inserted into the boring head and secured; this modular approach allows quick changeover between diameters and tool types.
Do taper adaptors affect concentricity and runout?
Properly selected taper adaptors ensure correct machine interface and help maintain concentricity and low runout for the boring head during machining.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com