Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
800mm Workshop Caliper Without Tip 0.05mm, 300mm Jaw, Fine Adjustment, Monoblock, Stainless Hardened Chrome Scale, in Case - Metav IndustryLine
Take advantage of robust long‑range measurement, corrosion‑resistant construction and precise fine adjustment for dependable workshop performance; order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. M201.328.2 — Workshop vernier caliper, 0–800 mm, stainless, fine adjustment (Metav IndustryLine) M201.328.2 is a workshop vernier caliper engineered for long‑reach external, internal and step measurements in heavy‑duty machine‑shop environments. 0–800 mm measuring range for large components Hardened stainless steel with matt‑chromed scale Fine‑adjustment spindle for precise positioning Monoblock design for increased rigidity Accurate long‑reach measurement for heavy assemblies Designed as a large‑range (500–1,000 mm) caliper, this instrument provides a practical balance between reach and stiffness, making it suitable for larger fixtures, housings and machining set‑ups. The 0–800 mm measuring span and extended jaw length of 300 mm enable access into deep bores and across wide faces without multiple gauge changes, reducing cycle time and handling. The mechanical Vernier is configured for a reading step of 0.05 mm, aligning with industrial workshop practice for repeatable checks and quick visual verification. Robust construction that withstands workshop demands The frame and measuring faces are made from hardened stainless steel, finished with a matt‑chromed scale to resist corrosion and minimise glare under workshop lighting. The monoblock construction increases profile rigidity across the full bar length, which improves reproducibility of measurements on heavy components; the tool’s mass (approx. 8.5 kg) reflects the substantial build and should be considered when planning handling or storage. A fine‑adjustment spindle permits micro‑positioning of the slider for confident setting of measurement points and comparison checks. Standards, handling and usability in daily inspection routines Calibration and traceability follow the specified norm: conformity to DIN 862 is provided for shorter jaw variants, while calipers with larger spans are produced to the manufacturer’s factory standard, ensuring consistent quality across sizes. The dual vernier arrangement (upper scale 1/128‑inch, lower scale 1/20 mm) supports mixed‑unit reading where imperial and metric references coexist in workshop documentation. The overall layout prioritises quick manual use and clear scale reading, making the instrument effective for routine production checks and first‑article inspections. For reliable large‑range measurement capacity and workshop durability, contact Metav Werkzeuge to discuss how the M201.328.2 fits specific applications and to arrange procurement through Metav Werkzeuge. Technical data Article number: M201.328.2 GTIN: 4054469101576 Category: Messschieber / Caliper Facts Measuring range: 0–800 mm Jaw length: 300 mm Resolution: 0.05 mm (vernier) Weight: 8.5 kg Measuring system: Analog vernier (mechanical) Special features Hardened stainless steel construction Matt‑chromed scale for improved legibility Fine‑adjustment spindle for precise setting Monoblock design for increased rigidity Conforms to DIN 862 for smaller jaws; larger spans to factory standard FAQ What measurement range does this caliper cover? The M201.328.2 covers a measuring range of 0–800 mm, designed for large‑component checks in workshop and production environments. Is the scale corrosion‑resistant for shop use? Yes, the M201.328.2 is made from hardened stainless steel with a matt‑chromed scale to withstand workshop conditions and maintain legibility. How precise is the reading on this analogue caliper? The vernier arrangement provides a reading step of 0.05 mm, a standard industrial resolution for mechanical calipers used in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless-steel construction, an 800 mm measuring range and a fine-adjustment spindle for dependable, repeatable measurements in heavy workshop environments; order the caliper directly via Metav Werkzeuge or consult the technical team for specification support. Workshop caliper with pointed jaws — Monoblock, 800 mm measuring range, 0.05 mm resolution (Metav IndustryLine) The Workshop caliper with pointed jaws is a robust analogue measuring instrument designed for large-format component measurement in industrial workshops and toolrooms. Hardened stainless-steel construction 800 mm measuring range Fine-adjustment spindle for precise setting Supplied in a protective transport case Large-range accuracy for heavy-duty workshop tasks With a measuring range of 800 mm, this instrument is classified among large-format calipers, intended for long-beam measurement tasks such as frame components, housings and larger fixtures. The combination of a long reach and a monoblock design reduces torsion and bending over the beam, supporting stable repeatability when measuring extended parts. The analogue vernier layout with a 0.05 mm increment aligns with common workshop tolerances and provides a clear, mechanical reference that is easy to read under varied lighting conditions. Durable construction and precise adjustment for consistent results The caliper is manufactured from hardened stainless steel with a matt-chromed scale, giving corrosion resistance and a low-reflectance surface for improved legibility. A fine-adjustment spindle enables accurate approach and locking of the jaws, turning coarse positioning into controlled measurement steps; this reduces user-induced error during clamping. The instrument features pointed jaws for access to small grooves or narrow seats and a monoblock jaw assembly to maintain parallelism and robustness across repeated use. The vernier specification is provided as 1/128" (top) and 1/20 mm (bottom), offering a dual-scale reference for workshops that still use imperial readings alongside metric. Practical workshop logistics and standards compliance Designed for routine industrial use, the caliper is supplied in a protective transport case, facilitating safe storage and transport between workstations. The analogue system is straightforward to maintain and does not require batteries, which simplifies long-term operation in busy production environments. Where applicable, jaw-length and manufacturing tolerances follow DIN 862 conventions for shorter jaw lengths; for larger jaw configurations, factory standards apply to ensure structural integrity. The robust build and clear scale mean the instrument performs best where coarse-to-medium precision is sufficient across large parts, striking a balance between reach and ease of handling. For large-component measurement tasks, choose the Metav IndustryLine workshop caliper — contact Metav Werkzeuge in Emmerich for ordering details or to request further technical specifications. Technical data Article number: M201.338 GTIN: 4054469101798 eClass: 21170344 Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution: 0.05 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Customs tariff number: 90173000 Special features Material: hardened stainless steel with matt-chromed scale Monoblock construction Fine-adjustment spindle Pointed jaws for narrow features Supplied in a protective transport case Analogue vernier instrument Conforms to DIN 862 for specified jaw lengths FAQ What measuring range does this caliper cover? The workshop caliper covers a measuring range from 0 to 800 mm, making it suitable for large-format components and long-beam measurements. What level of resolution and precision is provided? The instrument provides a resolution of 0.05 mm via an analogue vernier, matching common workshop tolerances for machining and assembly tasks. Which materials and finishes are used in the caliper's construction? The caliper is made from hardened stainless steel and features a matt-chromed scale for corrosion resistance and reduced glare. Is the caliper supplied with a protective case? Yes, the caliper is delivered in a protective transport case to facilitate safe handling and storage. Does the instrument comply with any standards? Jaw lengths and dimensional tolerances follow DIN 862 for the specified shorter jaw lengths; larger jaw configurations are manufactured to the supplier's factory standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Brass Precision Caliper 1mm Graduation, Analog - Metav IndustryLine
Benefit from the compact 0–80 mm measuring range, corrosion‑resistant brass construction and a clear 1 mm graduation for fast routine checks; these attributes make the tool ideal for quick verification tasks on the shop floor. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Brass Vernier Caliper M201.113 — 0–80 mm, 1 mm graduation (Metav IndustryLine) The Brass Vernier Caliper M201.113 is a compact analogue caliper designed for straightforward workshop checks and small‑part measurements. Brass construction for corrosion resistance Compact 0–80 mm measuring range Easy‑reading 1 mm graduation scale Light‑weight 0.2 kg for portable use Compact design that speeds up routine checks The compact, low‑mass construction and the 0–80 mm measuring span make this instrument well suited to rapid, on‑the‑spot inspection of small components. Its brass body offers inherent corrosion resistance, reducing the need for frequent surface care and ensuring that basic dimensional checks remain reliable even in busy workshop environments. The short, rigid jaws limit torsion during handling, which supports consistent contact and repeatable readings when assessing simple features on small parts. Clear scale and simple handling for efficient measurements Equipped with a coarse 1 mm graduation on a vernier layout, the instrument prioritises speed and legibility over fine resolution. This makes it appropriate for applications where approximate dimensions or quick pass/fail checks are required rather than sub‑millimetre precision. The analogue display avoids battery dependency and allows immediate interpretation of measurements; the simple scale layout reduces training time for staff who perform frequent, routine checks rather than precision metrology. Robust, low‑maintenance choice for everyday workshop use Built from brass and weighing approximately 0.2 kg, the caliper is easy to carry and store, and its robust material choice resists wear in standard workshop atmospheres. The design supports frequent handling and quick assessments without the fragility of more delicate gauge instruments. For tasks that demand higher resolution or traceable laboratory calibration, alternative models with finer graduation or digital readouts may be more appropriate; for general workshop verification and maintenance use, this caliper offers a pragmatic balance of toughness and simplicity. For fast, reliable routine measurements choose the Metav IndustryLine brass caliper and contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich Technical data Article number: M201.113 GTIN: 4054469151861 SKU: M201.113 eClass: 21170344 Facts Measuring range: 0–80 mm Maximum measuring range (mm): 80 Weight: 0.2 kg Tariff number: 90173000 Special features Material: Brass Analogue vernier display Label: Messing‑Messschieber 80x1mm Ablesung 1 mm Category: Calipers FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–80 mm, making it suitable for compact components and routine verification tasks. How fine is the graduation on the scale? The instrument features a 1 mm graduation on an analogue vernier, intended for quick checks rather than fine micrometric measurement. Is the caliper suitable for use in a workshop environment? Yes, the brass construction and lightweight design make the caliper appropriate for everyday workshop use and portable inspections. Does this caliper require batteries or electronics? No, the caliper is an analogue vernier instrument and operates without batteries, providing immediate readings without electronic dependency. Which Metav product line supplies this caliper? This model is supplied under the Metav IndustryLine label, SKU M201.113, intended as a practical, entry‑level measurement tool for routine tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Digital Brake Disc Caliper Long Measuring Probe Hold Function Stainless Steel - Metav IndustryLine
Take advantage of its stainless steel construction, long 32 mm probe and digital readout with Hold to measure brake-disc thickness precisely and reproducibly; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Brake-Disc Caliper M240.182 — long-probe digital caliper, 0–80 mm, Metav IndustryLine The Digital Brake-Disc Caliper M240.182 is a long-probe digital caliper designed for quick, reliable measurement of brake-disc thickness in workshop and garage environments. Long 32 mm measuring probe for recesses Hardened stainless steel construction Digital display with Hold and Zero functions Supplied in protective transport case Precision where it matters: repeatable brake-disc checks The long-probe digital gauge is optimised for brake disc measurement, offering a measuring span of 0–80 mm that falls into the micro-range for compact, high-precision calipers. With a display resolution of 0.01 mm and the specified reading accuracy of 0.05 mm, the instrument gives a verifiable numerical result that supports maintenance decisions and quality control routines. The hardened stainless steel frame maintains profile rigidity during repeated use, reducing measurement drift and ensuring consistent results across serial inspections. Built for workshop use: robustness and handling benefits Corrosion-resistant, hardened stainless-steel construction provides durability in everyday workshop conditions while keeping the instrument balanced at 0.44 kg. The extended probe (32 mm) accesses recessed braking surfaces and caliper housings without the need for disassembly, which reduces inspection time and risk of handling damage. The compact form factor and tactile slide enable single‑hand operation, so technicians can complete checks faster with fewer interruptions to the service workflow. Practical digital functions that save time and prevent errors The instrument features a clear digital display with ON/OFF, UNIT, HOLD and ZERO keys for straightforward operation and immediate data capture. The HOLD function secures readings when access is awkward; ZERO allows relative measurements for thickness loss compared with reference points. An integrated RB 5 data output is available for logging measurements or transferring values to a workshop database, simplifying traceability and documentation where required. Supplied in a protective transport case, the caliper is ready for safe storage and mobile use. Choose the Metav IndustryLine M240.182 for dependable brake-disc measurement and contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or on +49 2822 7131930 Technical data Article number: M240.182 GTIN: 4061905038341 Brand: Metav IndustryLine Material: hardened stainless steel Measuring range: 0–80 mm Resolution: 0.01 mm Indicated accuracy: 0.05 mm Probe length: 32 mm Weight: 0.44 kg Power supply: 3 V Data output: RB 5 Facts Measuring range max: 80 mm Display increments: 0.01 mm Net weight: 0.44 kg Probe length: 32 mm Voltage: 3 V Tariff number: 90173000 Special features Designed for brake disc measurement Digital display with ON/OFF, UNIT, HOLD, ZERO Hardened stainless-steel construction Long measuring probe for recessed areas Supplied in protective transport case RB 5 compatible data output FAQ How accurate is the measurement with this caliper? The Metav IndustryLine digital brake-disc caliper provides a display resolution of 0.01 mm and the specified reading accuracy of 0.05 mm for practical workshop checks. Can the caliper record measurements electronically? Yes, the M240.182 includes an RB 5 data output for connection to logging equipment or a workshop PC to simplify traceability and record keeping. Is the instrument suitable for mobile workshop work? The caliper is supplied in a protective transport case and its hardened stainless-steel construction plus 32 mm probe make it well suited to mobile inspections and routine garage use. What makes this caliper suitable specifically for brake discs? The long probe and compact measuring span allow access to recessed braking surfaces and provide repeatable thickness readings tailored to brake-disc inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Precision Caliper With Pointed Beak, 0.1mm Vernier, Monoblock Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact 0–80 mm measuring range, a pointed beak for access to tight geometries and a robust stainless steel monoblock design that keeps repeatability high in small-part inspection. Order the caliper directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Caliper with pointed beak for dental technicians M201.002 — 0–80 mm, 0.1 mm analogue vernier Caliper with pointed beak for dental technicians M201.002 is an analogue vernier instrument designed for precise internal and external measurements in small-format dental and laboratory work. Pointed-beak design for precise access Compact 0–80 mm measuring range 0.1 mm analogue resolution Monoblock stainless steel construction Precise measuring where space is limited The pointed beak tip lets the instrument reach narrow or recessed features that standard jaws cannot, making the tool particularly suitable for dental components and miniature parts. Built as an analogue vernier caliper, the instrument offers a clear 0.1 mm reading which provides straightforward, repeatable results for everyday workshop control. The compact measuring span of 0–80 mm places this instrument in the micro class of calipers, combining reach and rigidity for measurements on crowns, small fixtures and precise laboratory assemblies. Robust construction for reliable workshop use A single-piece monoblock frame with stainless steel construction reduces flex and improves stability across repeated measurements. The material choice resists routine corrosion and supports a long service life even in humid lab environments. Because the instrument is analogue, maintenance is simple: occasional cleaning and lubrication of the slide keep the scale readable and the vernier action smooth, supporting consistent measurement processes without complex electronics. Practical benefits for dental and lab workflows The short, narrow jaws reduce the need for part manipulation and speed up inspection cycles, which benefits throughput in small-batch production or laboratory contexts. The mechanical design also means immediate readiness without battery dependence, ensuring the instrument is available at every shift change. This translates into measurable time savings and a lower total cost of ownership for routine dimensional checks of small components. What the specifications mean in practice The vernier reading of 0.1 mm offers clear, unambiguous values for many workshop tolerances and fits common inspection routines. The micro-range classification emphasises that the instrument is optimised for fine, short-span measurements rather than large assemblies. For applications requiring sub-0.1 mm resolution, higher-precision or digital devices should be considered; for robust, repeatable checking of dental parts, this caliper balances practicality and control effectively. The labelled design and dental orientation make handling and identification straightforward in busy lab settings. For laboratory or dental shops seeking a compact, durable measuring instrument, contact Metav Werkzeuge for the Metav IndustryLine caliper M201.002 with pointed beak — expert advice and supply from Emmerich is available to match the tool to the application. Technical data Article number: M201.002 GTIN: 4054469100043 EClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–80 mm Resolution: 0.1 mm Weight: 0.02 kg Type: Analogue vernier caliper Special features Material: stainless steel (inox) Monoblock single-piece frame Pointed-beak jaws for narrow geometries Intended for dental and small-part measurements FAQ What accuracy can be expected from this caliper? The caliper offers a 0.1 mm vernier reading; the instrument provides reliable repeatability for standard workshop tolerances typical in dental and laboratory checking with the Metav IndustryLine caliper M201.002. Is the caliper suitable for dental component measurement? Yes. The pointed-beak geometry and the compact 0–80 mm span make the instrument well suited to inspect crowns, small fixtures and related dental parts with practical handling in lab conditions. Which measurement types are possible with this instrument? The tool supports internal and external measurements consistent with its design as an analogue vernier caliper; narrow-jaw access is a particular advantage for confined features. What material is the caliper made from and how durable is it? Constructed from stainless steel, the caliper combines corrosion resistance with mechanical stiffness, giving the Metav IndustryLine M201.002 long-term durability for routine workshop use. Does the M201.002 require batteries or electronic maintenance? No. As an analogue instrument, the caliper operates mechanically and needs only basic cleaning and occasional lubrication to maintain smooth slide action and legible readings. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Precision Caliper Curved Jaws, Locking Screw - Metav IndustryLine
Compact, corrosion‑resistant construction and a simple locking lever deliver repeatable results for precision micro‑work; combined with a fine 0–90 mm measuring range and 0.1 mm reading, this instrument streamlines small‑part inspection and assembly. Order directly via Metav Werkzeuge or consult our specialists for application advice. Caliper M201.007 — precision caliper, 0–90 mm range, 0.1 mm resolution (Metav IndustryLine) The Caliper M201.007 is a compact precision tool for specialist fine‑mechanical measurements, designed for external and depth checks where small jaws and a light, stiff frame make handling and repeatable readings straightforward Compact 0–90 mm measuring range 0.1 mm reading for quick verification Stainless steel construction for durability Curved measuring jaws for small contours Locking lever for repeatable measurements Precise micro‑measurements with clear benefits This caliper offers a 0–90 mm measuring range classified as micro, which is ideal where reach is limited but stiffness and precision are essential. The 0.1 mm vernier reading provides a straightforward, verifiable value for common inspection tasks; as an analogue instrument it requires no batteries and gives immediate, tactile feedback. The stainless steel construction resists workshop environments while the curved jaws allow secure contact on small or rounded components, reducing the need for supplementary fixtures and saving set‑up time. Designed for consistent workflow and easy handling A low mass of around 0.1 kg and a compact jaw length of 23 mm make the instrument easy to manoeuvre in one hand during repetitive checks. The integrated locking lever fixes the slider for transfer measurements and repeatability, turning individual readings into reproducible data points on the shop floor. For quick depth checks and external measurements the simple scale and clamp arrangement reduce operator variation, improving throughput without complex procedure changes. Practical applications and workshop suitability Classified for micro measurement work, this caliper suits fine‑mechanical workshops, small component inspection and specialist production tasks that value compactness over long reach. The curved tips help when measuring small bores or contours, while the robust stainless construction supports daily use. As a dedicated verification tool for short spans, it complements larger calipers in a metrology kit and serves as a reliable go‑to for routine dimensional checks. For precision micro‑work choose the Metav IndustryLine Caliper M201.007 — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.007 GTIN: 4054469183206 Weight: 0.1 kg Material: stainless steel Measuring range: 0–90 mm Resolution: 0.1 mm Jaw length: 23 mm Special feature: locking lever Jaw tips: curved Facts Measuring range max: 90 mm Measuring range min: 0 mm Resolution/display: 0.1 mm Weight: 0.1 kg Jaw length: 23 mm Special features Suitable for external and depth measurements Curved measuring jaws for small contours Stainless steel construction Category: Special caliper Range class: Micro (max 10–100 mm) FAQ What accuracy can be expected from this caliper? The Caliper M201.007 from Metav IndustryLine provides a vernier reading at 0.1 mm resolution, suitable for reliable shop‑floor verification and everyday dimensional checks. Which measurement types are possible with this instrument? External and depth measurements are supported by the design; the curved jaws also assist with measurements on small contours and rounded features. Is the caliper resistant to corrosion in a workshop environment? Yes, the stainless steel construction of the Caliper M201.007 offers good resistance to typical workshop conditions and frequent handling. Does the instrument include a calibration certificate? This product is supplied without an ISO 17025 calibration certificate by default; specific calibration services can be arranged separately if required. What advantages does the locking lever provide in routine use? The locking lever fixes the slider for transfer and repeat measurements, improving repeatability and reducing operator‑induced variation during inspection runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
930mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Die beeindruckenden Bewertungen von Metav Werkzeuge stehen für viele erfreute Kunden. Finde es selbst heraus und bestelle bei metav-shop.de! Das wichtigste für Einbaumessschieber waagerecht Messbereich: bis 800mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) digitale Ausführung Datenausgang: RB 5 Reichweite, die passt – bis 800mm Der Bereich bis 800mm bringt dir verlässliche Ergebnisse über die ganze Länge. Du bleibst sicher, auch bei großen Werkstücken. Das sorgt für saubere Arbeitsschritte. Gut in Produktion und Service. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. DIN 862 Alle Komponenten unseres Messwerkzeugs werden konsequent gemäß DIN 862 gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Expertenhinweis: Was ist bei der Reinigung der Messschenkel wichtig? Ein Fussel- oder Ölfilm von wenigen µm reicht, um Zehntel mm zu verfälschen. Deshalb vor jeder Messung die Messflächen mit einem fusselfreien Tuch abwischen. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Produktspezifikationen: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.360 Fakten: Messbereich: 0-800mm Gewicht: 0,6kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,07mm Länge: 930mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Neben der Präzision und dem Messbereich sind zusätzliche Funktionen wie ein Datenausgang oder die Messkraftüberwachung entscheidend. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Daneben ist wichtig zu prüfen, ob ein kalibrierter Messschieber benötigt wird. Schon im Zuge der Auslieferung kann die Kalibrierung erfolgen, und mit jährlicher Beständigkeit wird die Prozesssicherheit unterschützt. Pflegehinweis - damit Sie lange etwas von Ihrem Einbaumessschieber von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
Accessory Kit Data Collection MDS Connection Set, USB Dongles 2, Cables 1m - Microtech Metrology
Take advantage of an out-of-the-box data-collection solution that combines easy deployment, reliable autoconnection and synchronised measurement logging for smoother inspection routines; order directly via Metav Werkzeuge or consult the specialists for deployment advice. MDS Connection Set – data-collection accessory set with ready configuration and synchronisation The MDS Connection Set is an accessory kit designed to enable straightforward data collection and zeroing with Microtech metrology instruments, intended for integration into laboratory and workshop measurement workflows. Ready data-collection solution from the box Autoconnection and synchronised data reading Includes USB dongles and 1m connection cables Optional DataMet buttons and footswitch support Faster, more reliable data capture for quality control The connection kit is built to reduce manual steps in measurement acquisition: the bundled Windows application and device interfaces turn instrument readings into immediately usable data, eliminating repetitive transcription. By using the MDS 5.5 PRO software together with the hardware set, laboratories and shopfloors gain a repeatable data flow that reduces documentation errors and shortens inspection cycles. This increases throughput without compromising traceability or auditability. Plug-and-play networking that minimises setup time Automatic device pairing and persistent link management mean fewer interruptions during measurement campaigns. The set contains the essential interface hardware for rapid installation, enabling autoconnection and file synchronisation across the collection chain. Support for multiple simultaneous links maintains workflow continuity when several gauges are read in sequence, improving operational uptime and scaling easily with existing processes. Hands-free controls to keep operators productive Integration options for DataMet buttons and a footswitch allow zeroing and data capture without returning to the PC, which is particularly useful during fixtures or where both hands are occupied. This ergonomic function speeds repetitive tasks and reduces handling errors, translating into fewer rejects and less rework. The accessory approach supports both bench and production environments where consistent operator technique matters. Scalable package that fits existing metrology fleets The set is optimised as a pragmatic entry point for automated data capture: a compact hardware bundle with the MDS 5.5 PRO application provides a cost-effective route to digital measurement logging. Its design supports staged roll-out, from a single workstation to a multi-device arrangement, and integrates with Microtech instruments for standardised zero setting and synchronisation. For organisations seeking dependable results, the accessory kit offers measurable gains in data integrity and process efficiency. Contact Metav Werkzeuge today for tailored advice on integrating the Microtech Metrology MDS Connection Set into existing measurement processes and to arrange supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 299110810 GTIN: 4061905452673 Manufacturer: Microtech Metrology Facts Pieces per set: 5 USB dongles (PRO): 2 Connection cables (1 m): 2 Maximum connections supported: 10 Special features Ready data collecting solution from box MDS 5.5 PRO app for Windows Autoconnection and synchronisation of readings Zero setting support for instruments Optional DataMet buttons and footswitch for control FAQ What instruments can be used with this accessory set? The accessory set is intended for use with Microtech Metrology instruments and provides the interface and software required for data capture and zero setting. Is the MDS 5.5 PRO application included and which platform does it require? Yes, the MDS 5.5 PRO Windows application is part of the solution and is required to manage connections and synchronise measurement data. Can several gauges be connected at the same time? The set supports a multi-connection setup and is specified to manage up to ten simultaneous connections for coordinated data collection. Are there hands-free options for triggering measurements? Yes, the package supports optional DataMet buttons and a footswitch to enable hands-free zeroing and capture during measurement tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
DataMet Footswitch 120x90x40 mm Rechargeable Li-Pol Battery, Double Touch, Save/Zero Function - Microtech Metrology
Combine hands-free zeroing with secure data saving and a compact, rechargeable power source for uninterrupted measurement cycles; take advantage of the multifunction connectivity and built‑in 500 mAh Li‑Pol battery and order the DataMet FOOTSWITCH Double Touch directly via Metav Werkzeuge or ask our consultants if needed DataMet FOOTSWITCH Double Touch — multifunction footswitch with rechargeable battery (Microtech Metrology) The DataMet FOOTSWITCH Double Touch is a compact pedal controller designed to perform hands‑free zeroing and data saving for DataMet Microtech instruments and the MICROTECH MDS app on Windows, ideal for measurement benches and production stations Multifunction connection to DataMet instruments One‑ or two‑button operation Built‑in rechargeable 500 mAh Li‑Pol battery LED status indication and Windows MDS sync Hands‑free zeroing and reliable data capture for faster inspection The pedal delivers direct control for zeroing and immediate data saving to measurement devices, reducing cycle times on repetitive tasks. Designed for seamless integration with DataMet instruments and the Windows MDS app, the controller allows automatic recording of results into instrument memory or synchronisation with the desktop application. This setup streamlines traceable workflows and reduces manual transcription errors, improving throughput while preserving data integrity. Compact power and clear operational feedback for uninterrupted shifts With a built‑in Li‑Pol 500 mAh rechargeable battery, the unit removes reliance on external cabling and simplifies workstation layout. The compact footprint (120 x 90 x 40 mm) and low mass (0.2 kg) make it easy to position beside measuring equipment without obstructing operators. LED status indication provides an immediate visual confirmation of readiness and successful saves, allowing staff to keep focus on the workpiece rather than on peripheral checks. Flexible control options and custom functions to suit processes Available in one‑button or two‑button variants, the pedal supports straightforward operation patterns — single action for zeroing or dual action for zeroing plus save — and can be adapted with custom functions on request. Connectivity is engineered for reliable communication with DataMet instruments and the MICROTECH MDS app on Windows, enabling both local memory saves and synchronised data transfer to the software for centralised record‑keeping. Customisation allows the device to match specific test routines or integration requirements. Built for industrial benches and repetitive measurement tasks The design focuses on robust daily use: a tactile pedal action lowers operator fatigue and keeps hands free for part handling, while the compact enclosure resists workshop clutter. By moving routine commands to a foot controller, cycle reliability improves and process consistency is enhanced — a rational upgrade for assembly lines, quality control stations or calibration benches that demand repeatable results. Integration with existing DataMet ecosystems preserves investment in current metrology hardware. For tailored advice or to order the Microtech Metrology footswitch, contact Metav Werkzeuge in Emmerich for product matching and configuration: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 299900022 Label: DataMet FOOTSWITCH Double Touch Manufacturer: Microtech Metrology Facts Battery capacity: 500 mAh Dimensions: 120 x 90 x 40 mm Weight: 0.2 kg Special features Function: ZERO and saving data Connectivity: DataMet instruments; MICROTECH MDS app (Windows) Operation: 1-button or 2-button versions LED status indication Built‑in rechargeable Li‑Pol battery Custom functions available on request FAQ How does the pedal perform a zeroing operation? The pedal sends a zero command to the connected DataMet instrument; the DataMet FOOTSWITCH Double Touch triggers the instrument to set the current position as the reference and can save that value into instrument memory. Can the device save measured values directly to the MICROTECH MDS app? Yes — the footswitch supports synchronisation and data saving to the MICROTECH MDS app on Windows, enabling direct transfer from the controller to the software for logging and analysis. Is there an option for two separate functions on different buttons? A two‑button version is available and configured so that one button can perform zeroing while the other triggers data saving, or alternate custom mappings can be specified on request. What are the physical dimensions and weight of the controller? The unit measures 120 x 90 x 40 mm and weighs approximately 0.2 kg, making it suitable for compact workstations. Is the battery replaceable or rechargeable only? The device is supplied with a built‑in rechargeable Li‑Pol 500 mAh battery for cordless operation; for specific service or replacement options, consult the product documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
DataMet Footswitch One Touch Rechargeable Li‑Pol Battery 60x60x20 mm, Microtech Metrology
Take advantage of a compact control unit that combines single‑step zeroing, reliable data saving and a rechargeable power source to streamline measurement routines; order the DataMet FOOTSWITCH One Touch directly via Metav Werkzeuge or consult our specialists for application advice. DataMet FOOTSWITCH One Touch — Hands‑free data capture footswitch with Li‑Pol power (Microtech Metrology) The DataMet FOOTSWITCH One Touch is a sturdy footswitch for Microtech DataMet measuring instruments and the MDS Windows app, designed to perform zeroing and to save measurement data directly to the instrument memory or to the MDS software One- or two-button configuration Built‑in rechargeable Li‑Pol 500 mAh Single-step zeroing and data saving Compact 60×60×20 mm footprint Streamlined capture to reduce process steps The footswitch enables single‑step workflows: press the pedal to perform zeroing or to transmit and store a measurement, removing the need for manual entry and lowering the risk of transcription errors. Integration with Microtech instruments and the MDS Windows application allows measured values to be synchronised directly with device memory or with the PC software, supporting efficient data collection in production and quality control. The clear LED status indication provides immediate visual confirmation of connectivity and action, helping to keep throughput steady. Compact, rechargeable design for continuous use With a built‑in rechargeable Li‑Pol 500 mAh cell and a small footprint of 60 × 60 × 20 mm, the unit fits tidy workstations while offering dependable portable power. The rechargeable battery removes the need for disposable cells and simplifies logistics in workshops where uninterrupted operation matters. The low weight and rugged casing make the switch easy to position near benches or machine controls; maintenance is straightforward and downtimes are minimised thanks to the internal charging option. Flexible integration and custom options for specialised workflows Available as a one‑button or two‑button variant, the footswitch can be tailored to simple or multi‑function tasks. Standard operation covers zeroing and data saving to either the instrument memory or the MDS software on Windows, while custom functions can be implemented on request to match particular measurement sequences or automation steps. The unit’s role as a hands‑free input device makes it especially suitable where operator focus and safety are priorities, such as machining centres or assembly lines. For hands‑free data capture with Microtech Metrology instruments, contact Metav Werkzeuge for tailored supply and technical advice by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 299900021 Name: DataMet FOOTSWITCH One Touch Brand: Microtech Metrology Facts Battery capacity: 500 mAh Dimensions: 60 x 60 x 20 mm Weight: 0.2 kg Buttons: 1 or 2 Special features Connects to DataMet instruments and MDS app for Windows Functions: zero value and save data to instrument memory or app LED status indication Built‑in rechargeable Li‑Pol battery Custom functions available on request FAQ Is the footswitch compatible with all Microtech DataMet instruments? Compatibility depends on the instrument interface; the DataMet FOOTSWITCH One Touch is designed to connect with Microtech DataMet devices and to synchronise with the MDS Windows app as specified by Microtech Metrology What actions can be triggered by the footswitch? Standard actions are zeroing and saving measured values; additional control sequences can be configured as custom functions for specialised applications Does the unit require external power while operating? The footswitch uses an internal rechargeable Li‑Pol 500 mAh battery and does not require constant external power during normal use Are there variants with different button counts? Yes, the device is offered in one‑button and two‑button configurations to support both single‑action and dual‑action workflows Can the LED status be used to verify data transfer? The LED indicates connection and operation status, providing quick visual confirmation that a zero or save command has been issued Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
M2-30 Gear Tooth Caliper With Fine Adjustment, Digital Readout 0.01mm, Stainless Hardened, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, hardened stainless steel construction and a fine-adjustment spindle for repeatable, production-ready gear inspections; order the instrument directly via Metav Werkzeuge or ask our consultants for specification support. Digital gear-tooth caliper M240.111 – Digital readout with fine adjustment for modules M2–M30 (Metav IndustryLine) The Digital gear-tooth caliper M240.111 is a specialist measurement instrument designed for quick and reliable checks of gear tooth widths and clearances on modules M2–M30, suited to workshop inspection, maintenance and component verification. Digital readout with mm/inch and zero function Fine adjustment for controlled, repeatable contact Fully hardened stainless steel construction Resolution 0.01 mm / 0.0005 in display Consistent, reproducible gear measurements with fine control Measuring gear tooth widths demands both resolution and steady contact. The instrument combines a digital display with a fine-adjustment spindle that permits slow, controlled closure of the jaws; this reduces operator variability and helps to achieve reproducible results on successive parts. With a display step of 0.01 mm (0.0005 in) the device supports routine acceptance tests and process checks where micro-scale differences in tooth thickness affect gear meshing and noise. The instrument’s design translates measurement data into actionable pass/fail decisions faster than manual gauges, improving throughput and reducing rework. Built to withstand the workshop – stable and corrosion-resistant A measuring tool must stay accurate under daily use. Constructed from fully hardened stainless steel, the caliper resists wear, maintains jaw geometry and stands up to workshop conditions where lubricants, coolant mist or handling are present. The hardened material ensures long-term dimensional stability, which in turn preserves measurement traceability across inspection sequences. For organisations that rely on repeat measurements for assembly or incoming inspection, the robust build reduces the need for frequent mechanical adjustment and keeps measurement uncertainty low over time. User-friendly digital features for efficient documentation Practical operation speeds up inspection routines: the instrument’s digital readout offers on/off control, a mm/inch toggle and a zero function for incremental measurements, enabling rapid checks without complex setup. The compact display format makes readings clear in confined inspection benches, while the fine-adjustment control allows sensitive approach to the tooth flank. These features help inspectors record consistent values and integrate results into quality logs more reliably than analogue alternatives, supporting faster decision-making on the shop floor. Where this caliper delivers value in production and servicing The instrument is optimised for small to medium gear components, pinions and sprockets within the M2–M30 module range, commonly found in precision drives, small gearboxes and toolmaking tasks. By combining a high-resolution readout with mechanical fine adjustment and hardened construction, the tool reduces measurement-related uncertainty and shortens cycle time for repeat inspections. The result is improved component interchangeability and fewer assembly issues stemming from incorrect tooth profiles or inconsistent clearances. For specification advice or to secure the Metav IndustryLine digital gear-tooth caliper (M240.111) directly, contact Metav Werkzeuge for tailored delivery and technical guidance Technical data Article number: M240.111 GTIN: 4054469112831 ECLASS: 21170344 TARIC / HS code: 90173000 Label: Digital gear-tooth caliper, M2–30 with fine adjustment Numbers / Core technical data Resolution: 0.01 mm Resolution (inch): 0.0005 in Measuring range: M2–M30 Jaw length: 30.5 mm Special features / Design Material: fully hardened stainless steel Digital display: on/off, mm/inch, zero Fine adjustment: for controlled closing FAQ How accurate is the instrument for gear tooth measurements? The caliper offers a display resolution of 0.01 mm (0.0005 in) and a fine-adjustment spindle for controlled contact, which supports reproducible width measurements and reliable comparative checks across series. Which gear sizes and modules can be inspected? Modules from M2 up to M30 are covered, making the device suitable for small to medium gears, pinions and similar transmission components within that module range. Is the construction suitable for daily workshop use? Yes. The caliper is made from fully hardened stainless steel, providing wear resistance and dimensional stability under routine handling in production and maintenance environments. What digital functions are available on the display? The instrument includes on/off control, a mm/inch toggle and a zero function to permit incremental measurements and straightforward data reading during inspection workflows. Does the data sheet specify any certification or calibration status? The product data does not list a supplied calibration certificate or an ISO 17025 calibration; the available specification focuses on construction, display functions and measuring range. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5-50 Tooth Gauge Digital Caliper With Fine Adjustment, 0.01mm Resolution, Stainless Hardened, Supplied In Case - Metav IndustryLine
Take advantage of the combination of digital readout, fine-adjustment control and hardened stainless-steel construction for repeatable gear-tooth measurements and efficient quality checks. Order the unit directly via Metav Werkzeuge or consult the Metav team for specification advice and delivery from Emmerich. Digital Gear Tooth Caliper M5–50, fine adjustment — Metav IndustryLine The Digital Gear Tooth Caliper M5–50 is a specialised digital caliper designed for precise measurement of gear tooth widths and small profiles, suitable for workshop quality control and maintenance tasks. Digital display with mm/inch and zero Fine-adjustment thumb screw for precise setting Hardened stainless-steel construction 0.01 mm resolution for consistent readings Faster, measurable inspection results The caliper combines a clear digital display with a standard 0.01 mm resolution, enabling rapid, reproducible readings that shorten inspection cycles. The integrated mm/inch toggle and zero function simplify comparative checks and part-to-part verification, while the fine-adjustment mechanism allows controlled approach to contact points, reducing overshoot and measurement errors. These technical advantages translate into fewer reworks and a steadier production flow for small-series and maintenance jobs. Robust build for regular workshop use Manufactured from fully hardened stainless steel, the instrument resists shop-floor wear and maintains measurement geometry under typical handling. The compact jaw geometry, including a jaw length of 50.5 mm, provides access to narrow tooth spaces and small gears without sacrificing stiffness. The fine-adjustment thumb screw improves repeatability when setting the caliper on gear flanks, while the robust construction contributes to long service intervals and predictable performance in routine quality-control stations. Practical fit for inspection and repair tasks Designed for targeted gear inspection, the caliper supports quick checks during set-up, maintenance and incoming-parts inspection. The instrument’s control set (ON/OFF, mm/inch, ZERO) reduces training time and avoids ambiguity in recorded values, making it suitable for both craftspeople and shop-floor metrology. With its clear readout and precise adjustment, the tool aids process stability and decision-making in small-batch production environments. For precision gear measurement with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for consultation and reliable supply from stock. Technical data Article number: M240.112 GTIN: 4054469112848 ECLASS: 21170344 Tariff number: 90173000 Measuring range: M5-50 Digital: yes Display functions: ON/OFF, mm/inch, ZERO Material: stainless steel, fully hardened Core specifications Resolution (display): 0.01 mm / 0.0005 in Jaw length: 50.5 mm SKU: M240.112 Features and materials Fine-adjustment thumb screw Digital readout with mm/inch and zero Hardened stainless-steel construction Intended for gear-tooth width and small-profile measurements FAQ What accuracy can be expected from this caliper? The caliper delivers a display resolution of 0.01 mm, which provides reliable repeatability for routine workshop and inspection tasks using the digital readout. Is the instrument suitable for measuring narrow gear tooth spaces? Yes, the combination of compact jaws and a 50.5 mm jaw length is intended to reach into narrow gear profiles while maintaining stiffness for consistent readings. Which display functions are available on the device? The unit features ON/OFF control, mm/inch conversion and a zero button to support comparative measurements and easy set-up of reference points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Magnifying Glass With Standard Template - Metav IndustryLine
The practical combination of clear optics and a handheld format supports efficient close inspection and routine visual checks in workshop and quality-control environments. Benefit from Metav IndustryLine consistency and traceability when integrating this tool into inspection workflows. Order the magnifier directly via Metav Werkzeuge or ask our consultants if needed. Magnifier M905.180 — handheld inspection magnifier by Metav IndustryLine Magnifier M905.180 is a compact handheld inspection tool designed for close visual checks and simple quality-control tasks across workshops and service benches. Handheld design for close inspection Clear optics for enlarged detail Metav IndustryLine build quality Faster, more reliable close inspection with clear optics The M905.180 supports visual tasks where detail matters: surface checks, printed-mark verification and component inspection. Its handheld format enables quick positioning and steady observation, reducing the need for repetitive handling during routine checks. Clear magnification assists in recognising fine defects and surface irregularities, improving throughput in inspection steps while maintaining visual comfort for repeated use. Durable design that suits workshop routines Constructed to be easily handled on the shop floor, this inspection tool combines everyday usability with a design that withstands regular handling. The association with Metav IndustryLine signifies consistent sourcing and a focus on availability for industrial customers. The compact form simplifies storage on tool boards or in inspection kits, supporting a reliable workflow without introducing complex maintenance requirements. Practical integration for quality-control processes As a straightforward optical aid, the magnifier assists operators and technicians in verifying small details quickly, shortening non-value-adding time spent at inspection stations. The tool complements measuring equipment and visual gauges by offering an immediate, low-effort method to confirm markings, labels or minor surface flaws. Its simplicity makes it suitable as a standard item in workshops, service departments and production lines where rapid visual validation is needed. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine magnifier M905.180 can be added to workshop inspection kits; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M905.180 GTIN: 4061905450068 Brand: Metav IndustryLine Facts No numerical specifications provided Special features Handheld magnifier for inspection and reading Compact design for quick visual checks FAQ What is the intended use of this magnifier? The Metav IndustryLine magnifier M905.180 is intended for close visual inspection, simple quality-control checks and reading small details in workshop and service environments. Which identification numbers belong to the product? The item is listed as SKU M905.180 with GTIN 4061905450068 for catalogue and inventory purposes. Is the magnifier part of a larger product range? Yes, the tool is supplied under the Metav IndustryLine brand, reflecting availability within a broad selection of workshop and measurement equipment. Are optical power or dimensions specified for this magnifier? No numerical specifications for optical power or dimensions are provided in the available product data Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Microtech Metrology MDS PRO Data Collection Set USB Dongles Cables DataMET IP67 - Microtech Metrology
Take advantage of a ready-to-run data-collection solution that combines autoconnection, rapid synchronisation and portable hardware for efficient workshop integration; the kit includes multiple USB dongles and an IP67-rated DataMET unit for robust on-site operation. Order the set directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology MDS PRO Accessory Set — ready data-collection kit with USB dongles and DataMET IP67 The Microtech Metrology MDS PRO Accessory Set is a preconfigured collection of hardware and software designed to capture and synchronise measurement data from Microtech instruments in both workshop and laboratory environments. Ready-to-run data-collection kit Autoconnection and synchronised reading Includes DataMET IP67 2-button unit Up to 18 simultaneous connections Faster, more reliable data capture for everyday metrology The kit is presented as a ready-to-run solution that reduces setup time and minimises manual handling of measurement results. With the included MDS 5.5 PRO app for Windows and a set of USB dongles, the solution supports automatic device detection and continuous synchronised reading, which lowers transcription errors and streamlines traceability. This rational advantage translates into fewer interruptions during production checks and a measurable uplift in data consistency for routine quality control. Seamless networked operation across multiple instruments Designed for multi-device workflows, the accessory set provides hardware for distributed data collection and a robust connection strategy: autoconnection routines, a waterproof DataMET IP67 2-button interface and footswitch options for hands-free capture. The system supports a high number of endpoints — up to 18 connections — enabling consolidated logging from various gauges and instruments without additional bespoke integration work. For procurement officers and workshop managers, this means reduced integration time and a predictable roll-out path. Practical benefits in workshop and lab use Beyond raw connectivity, the set emphasises usability and durability. The included 1 m cables and multiple dongles permit flexible station layouts, while the IP67-rated input device withstands harsher environments where splash resistance matters. Optional DataMet buttons and a footswitch enable ergonomic operation during repetitive tasks, and the zero-setting capability simplifies reference procedures. For teams seeking to modernise measurement routines, the kit offers a cost-effective route to digital data capture without complex IT overhead. For a tailored discussion of how the Microtech Metrology MDS PRO Accessory Set can be deployed in a specific production environment, contact Metav Werkzeuge for expertise and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 299110840 GTIN: 4061905452680 Manufacturer: Microtech Metrology Set: Accessory set Facts USB dongles (PRO): 3 Cables (1 m): 3 DataMET IP67 (2-button): 1 Maximum connections: 18 Special features MDS 5.5 PRO app for Windows Ready-to-run data-collection solution Autoconnection and synchronised reading Optional DataMet Buttons and footswitch Zero-setting function FAQ What is included in the accessory set? The accessory set contains three USB dongles (PRO), three 1 m cables and one DataMET IP67 2‑button unit, together with the configuration files for the MDS 5.5 PRO application. Can the kit collect data from multiple instruments at once? Yes, the system supports up to 18 simultaneous connections and is intended for consolidated data capture across multiple Microtech metrology instruments. Is the DataMET interface suitable for workshop use? The DataMET IP67 2-button unit is splash-resistant and built for rugged conditions, making it suitable for demanding workshop environments where durability is required. Which software is used to manage the collected data? Measurement data are managed via the MDS 5.5 PRO app for Windows, which handles autoconnection, synchronised reading and basic data routing for downstream processing. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
MicrotechData LITE Android App For Data Transfer And Analysis, - Microtech Metrology
Take advantage of the fast, wireless data capture, flexible export options and the absence of a USB dongle to streamline measurement workflows and reduce manual transcription errors; order the MicrotechData LITE directly via Metav Werkzeuge or ask our consultants for integration advice. MicrotechData LITE — Android measurement-data app with wireless instrument support (Microtech Metrology) The MicrotechData LITE app is an Android-based measurement data manager for connecting multiple DataMet and WIRELESS SwissMet instruments and handling collection, visualisation and export in workshop and inspection environments Wireless connection to DataMet/WIRELESS instruments Export measurements to XLS and CSV No USB dongle required for setup Faster digitisation through wireless collection The app provides a FREE MDS application for Android (minimum Android 6.0), enabling rapid transfer of readings from compatible instruments without manual entry. By supporting wireless links to DataMet and WIRELESS SwissMet instruments and no USB-dongle requirement, the solution reduces setup complexity and accelerates routine checks. This direct transfer shortens cycle times on the shop floor and lowers the risk of transcription errors during data capture. Ready-to-use exports and on-device analysis Measurement series can be saved and analysed immediately: export to XLS or CSV, save graphs and access a complete measuring history for traceable documentation. Built-in functions such as Go/NoGo, Timer, Linear correction and statistics mode simplify repetitive testing and provide decision-ready results. Graphical mode and voice mode add clarity and accessibility during inspections, supporting efficient quality control and a smooth handover to SPC or reporting processes. Practical features for workshop resilience and multilingual teams Designed for mixed workshops, the application reports instrument battery status and supports standard and energy saving mode, extending on-device runtime for WIRELESS SwissMet instruments. The app allows the management of multiple users via a user manager and offers multilanguage support across twelve languages, improving usability across shifts and international teams. The MDS application is downloadable from Google Play and connects up to eight instruments concurrently, making it suitable for production and mobile inspection tasks. Contact Metav Werkzeuge today to discuss MicrotechData LITE integration, request pre-sales technical information or receive tailored advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 299100040 GTIN: 4061905048067 Label: MDS Software für Android Manufacturer: Microtech Metrology Facts Platform: Android 6.0 Max. instruments: 8 Multilanguage: 12 languages File export: XLS, CSV Special features FREE MDS application for Android Connection with DataMet / WIRELESS SwissMet instruments NO USB-DONGLE requested Standard and energy saving mode (for WIRELESS SwissMet instruments) Go/NoGo function Timer and linear correction Statistics mode and graphical mode Measuring history and save graph Voice mode User manager Instrument battery status mm/inch conversion Save data to xls and csv FAQ What platforms are supported by the app? The MicrotechData LITE application runs on Android devices (minimum Android 6.0) and is available for download from Google Play. How many instruments can be managed at the same time? The app supports simultaneous connections to multiple instruments, permitting up to eight DataMet or WIRELESS SwissMet devices in parallel. Can measurement data be exported for further analysis? Yes — readings and graphs can be saved and exported in XLS and CSV formats for use in spreadsheets or SPC tools. Is a USB dongle required to connect the instruments? No; MicrotechData LITE operates without a USB dongle, simplifying installation and reducing accessory requirements. Which inspection functions are included for pass/fail checks? The software includes Go/NoGo, timer, linear correction and statistics mode, enabling rapid pass/fail assessments and basic on-device analysis. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
MicrotechData LITE iOS Wireless Data Transfer App, Up to 8 Instruments, CSV Export - Microtech Metrology
Take advantage of seamless wireless logging, real‑time visualisation and CSV export to speed up inspection cycles; the free iOS MDS app removes the need for dongles and supports up to eight simultaneous instrument connections. Order the software through Metav Werkzeuge or contact our consultants for integration advice. MicrotechData LITE — mobile measurement data interface for DataMet/WIRELESS (iOS) The MicrotechData LITE is a free iOS application designed for wireless connection, data capture and basic analysis of DataMet and WIRELESS SwissMet measuring instruments across workshop and quality‑control environments Free MDS app for iOS and macOS Connects up to 8 DataMet/WIRELESS instruments No USB dongle required for connection CSV export and graphical data saving Faster inspection cycles through wireless logging and visual checks The app offers wireless data transfer and real‑time visualisation, enabling rapid pass/fail decisions directly at the workbench. By supporting simultaneous connections to 8 instruments, the software reduces manual entry and waits for individual transfers, which shortens overall cycle time. With integrated Go/NoGo logic and an on‑screen timer, the workflow becomes more reproducible and less dependent on paper notes. The application is available on the App Store and installs quickly on compatible Apple devices for immediate use. Secure data handling, export and simple analysis for traceability Measurement history is stored locally and can be exported as CSV for downstream processing or archived with saved graphs for visual traceability. The software includes statistics mode and linear correction, supporting standard quality checks and compensations without additional tools. Unit conversion (mm/inch) is built in, while the user manager keeps operator entries distinct for audit trails. Instrument battery status and a voice mode for hands‑free alerts add practical reliability during long inspection runs. Practical integration into workshop routines and energy‑aware operation Designed for use with DataMet and WIRELESS SwissMet instruments, the application supports a standard and an energy saving mode to prolong sensor battery life during extended sessions. No external dongle is required, which simplifies set‑up and reduces desk clutter in instrument banks. Multilingual support and voice prompts improve accessibility for mixed teams, while graphical output and export options make the app a compact replacement for basic desktop logging systems. The combination of wireless connectivity and simple data export delivers measurable gains in throughput and documentable quality. Contact Metav Werkzeuge to download MicrotechData LITE from the App Store and discuss wireless integration for DataMet/WIRELESS instruments; consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Item number: 299100060 GTIN: 4061905047909 Manufacturer: Microtech Metrology Platform: iOS Price: FREE Facts Max. instruments: 8 Multilanguage: 3 languages mm/inch conversion: yes Special features Free MDS application for iOS and macOS For connection with DataMet / WIRELESS SwissMet instruments NO USB‑DONGLE required Standard and energy saving mode for instruments Functions: Go/NoGo, Timer, Linear correction, Statistics mode Data Export: CSV and saved graphs Measuring history and graphical mode User manager and voice mode Instrument battery status display FAQ Is MicrotechData LITE compatible with DataMet instruments? Yes. MicrotechData LITE supports wireless connection to DataMet and WIRELESS SwissMet instruments for real‑time logging and control. How many instruments can be connected at once? The application permits simultaneous connections to up to 8 instruments, enabling parallel data capture from multiple measuring stations. Can measurement results be exported for further analysis? Yes. Measurement data can be exported as CSV and saved graphs can be exported for documentation or further processing. Is a USB dongle required for using the app? No. MicrotechData LITE operates without a USB dongle, simplifying setup and avoiding additional hardware. Where is the app available and is there a cost? The MDS application is offered free of charge on the App Store and can be downloaded to compatible Apple devices. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
MicrotechData LITE Windows Data Collection Software, USB Dongle Support - Microtech Metrology
Take advantage of the combination of seamless data capture, autoconnection to Microtech instruments and straightforward export options for a smoother inspection workflow; obtain the software directly via Metav Werkzeuge or consult our specialists for integration support. MicrotechData LITE for Windows — Free connection software for Microtech instruments (Microtech Metrology) The MicrotechData LITE for Windows is a compact PC application designed to collect, synchronise and export measurement data from Microtech instruments for routine inspection and documentation tasks. Free download for Windows 7–11 Autoconnection with Microtech instruments Export to external programs (CSV, Excel) mm/inch conversion and Go/NoGo functions Faster measurement routines through automated data capture The primary advantage of this Windows application is its focus on efficiency: autoconnection and data synchronising reduce manual data entry and transcription errors, so inspection cycles complete more quickly and reproducibly. Integration with DataMet and WIRELESS SwissMet instruments allows direct reading of values, while the export function streams results into spreadsheet or quality-management software for immediate analysis. For production environments where throughput and traceability matter, the software turns raw readings into usable records with minimal operator intervention. Clear outputs and compatible formats for immediate use Recording measurement results in an industrial setting becomes practical with straightforward output options. The tool supports mm/inch conversion, selectable resolution, a timer and Go/NoGo functions, enabling concise pass/fail checks as part of a digital inspection routine. Export to external programmes ensures captured data can be archived, processed or integrated into reporting workflows without rework. These capabilities suit both shop-floor quality checks and simple documentation tasks in technical offices. Reliable connection and device management on standard Windows platforms Compatibility with Windows 7–11 ensures the application runs on a wide range of existing PCs; the software manages one instrument connection at a time while allowing the controlled use of a single USB dongle where required. Device filtering and a basic user manager ease deployment in shared workstations by limiting visible instruments and tracking access. The overall result is consistent measurement transfer from instrument to PC, lowering the risk of missed or lost data during routine inspections. Practical fit for workshops and small labs seeking straightforward integration This lightweight solution is aimed at workshops, maintenance teams and small metrology labs that require reliable digital capture without complex configuration. Delivered as a download, the package provides essential functions—autoconnection, export, unit conversion and basic device filtering—without adding unnecessary complexity. For facilities that later need broader integration, the software serves as a familiar entry point to digital workflows and can be paired with further Microtech tools or data-management routines. Download MicrotechData LITE for Windows via Metav Werkzeuge's download centre or contact the Metav Werkzeuge specialists for tailored advice and installation guidance: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 299100530 GTIN: 4061905452055 Brand: Microtech Metrology Delivery: Download Platform: Windows 7, 8, 10, 11 Facts Max. instruments connected: 1 USB-dongles (max qty): 1 SKU: 299100530 Special features MDS app for Windows for connection with Microtech instruments Instruments connection: DataMet / WIRELESS SwissMet Autoconnection Data reading synchronising Filtering Microtech devices mm/inch conversion Go/NoGo functions Resolution selection Timer User manager Export to external programs (CSV, Excel) FAQ Which Windows versions are supported? The software supports Windows 7, 8, 10 and 11 and is provided as a downloadable package for installation on compatible PCs. How many instruments can be connected at once? MicrotechData LITE permits a single instrument connection at a time; the application is configured to manage one tool per session for consistent data transfer. Can measurement data be exported to quality systems? Yes. The application provides export to external programmes (CSV/Excel), enabling transfer of captured readings into quality-management or reporting systems. Does the software support unit conversion and pass/fail checks? The tool includes mm/inch conversion and Go/NoGo functions, allowing both unit flexibility and quick pass/fail evaluation during inspections. Is there support for wireless Microtech instruments? Connection modes include compatibility with DataMet and WIRELESS SwissMet instruments for direct data capture where wireless options are available. What formats and options are available for data capture? MicrotechData LITE offers selectable resolution, timer-controlled readings, device filtering and a user manager, alongside standard data export formats for downstream processing. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
MicrotechData PRO Software for Windows USB Stick, Data Export CSV/XLS/PDF, Connect Up to 48 Instruments - Microtech Metrology
Fast integration and comprehensive export capabilities make MicrotechData PRO the pragmatic choice for centralising measurement workflows: support for up to 48 instruments, autoconnection and flexible export to CSV, XLS and PDF improves traceability and reduces manual transfer errors. Order the MicrotechData PRO directly via Metav Werkzeuge or ask our consultants if needed. MicrotechData PRO — data management software for metrology with USB-stick distribution and support for up to 48 instruments A powerful Windows-based data-collection and export solution designed for connection with Microtech measuring instruments and SwissMet wireless devices. Connects up to 48 instruments Export to CSV, XLS and PDF Graphical and 2D graphical modes USB-stick format with optional dongle Centralised data capture to speed up quality workflows The software offers a structured way to collect and record measurement values, improving efficiency in production and inspection. Designed for Windows 7–11, MicrotechData PRO provides autoconnection and data synchronisation so readings are transferred automatically into the database, reducing manual entry and associated errors. The ability to set instrument ZERO values and to filter devices streamlines repeatable processes and supports audit-ready traceability for routine quality checks. Integration that fits existing IT environments Compatibility with common office and ERP tools is built in: exports are available in CSV, XLS and PDF, while graphical output can be saved as PNG for reporting. Export formatting is adjustable (dot/comma settings and symbol options), which simplifies import into systems such as Excel, SAP or SolidWorks. The software’s capacity to produce both tabular and 2D graphical representations helps convert raw measurements into actionable data for engineering and process teams. Flexible capture options and ergonomic operation Multiple input methods reduce handling time and improve measurement ergonomics: optional DataMet Buttons, wired or wireless footswitches, and USB footswitch compatibility allow hands-free capture where needed. The package requires a USB-DONGLE for licence or connection purposes and supports mm/inch conversion and Go/NoGo functions to speed pass/fail decisions on the shop floor. Graphical modes assist visual inspection tasks and simplify reporting of trend or deviation data. Ready for everyday workshop use and multi-language teams Delivered on a USB-stick, the application is available in 10 languages, easing deployment across international teams. The software handles up to 10 USB-dongles concurrently and can manage the connection of many instruments without complex configuration, reducing commissioning time. This combination of practical delivery and broad language support suits industrial measurement environments where quick uptake and consistent results are priorities. For configuration advice, licence clarification and secure delivery from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to request MicrotechData PRO on USB-stick. Technical Data Article number: 299100570 GTIN: 4061905452079 Brand: Microtech Metrology Format: USB-stick Platform: Windows 7, 8, 10, 11 Facts Max. instruments connected: 48 USB-dongles (max qty): 10 Languages supported: 10 Special features Data export: csv, xls, pdf Graphical mode and 2D graphical mode, save graph as png Autoconnection and data reading synchronising Instrument ZERO setting and filtering of Microtech devices Integration with Excel, SAP, SolidWorks (online export) Optional DataMet Buttons and wired/wireless footswitch mm/inch conversion and Go/NoGo functions USB-DONGLE requested for operation FAQ Is MicrotechData PRO compatible with older Windows versions? MicrotechData PRO supports Windows 7, 8, 10 and 11 as stated in the product specification and runs from the supplied USB-stick. How many instruments can be managed simultaneously? The software can connect and manage up to 48 instruments, allowing centralised collection from multiple measuring devices. Which export formats are available for reporting? Export formats include CSV, XLS and PDF; graphical output can be saved as PNG for inclusion in reports. Is a special dongle required to run the software? A USB-DONGLE is requested for licence/connection purposes; the product listing notes the dongle requirement explicitly. Can the software interface with ERP or CAD systems? Online export to external programmes such as Excel, SAP and SolidWorks is supported, with adjustable data formats to match import requirements. Are hands-free capture options available for use in production? Yes—optional DataMet Buttons and footswitches (wired and wireless) are supported to facilitate hands-free data capture. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Modbus TCP/IP Data Box For Microtech DataMet Instruments RS‑485 IP40 - Microtech Metrology
Take advantage of a compact interface that converts USB‑C instrument output into an industrial Modbus RTU stream combined with a RS‑485 4‑wire connection and configurable serial settings for straightforward system integration; its IP40 enclosure and small footprint keep installation simple in controlled environments. Order the Modbus TCP/IP data box directly via Metav Werkzeuge or ask our consultants if needed. Modbus TCP/IP Data Box — Modbus RTU gateway with RS‑485 and USB‑C for Microtech instruments Modbus TCP/IP Data Box provides a compact gateway to integrate Microtech DataMet instruments into industrial Modbus networks, converting USB‑C output into a configurable RS‑485 Modbus RTU interface for data collection and automation tasks Industrial Modbus RTU interface (RS‑485) Compact IP40 housing, 53×82×31 mm Configurable baud rate, default 9600 bps USB‑C compatibility with DataMet instruments Reliable serial integration for automation and data logging The device converts a USB‑C output from measurement instruments into a standardised Modbus RTU protocol over RS‑485, enabling direct connection to PLCs, data loggers and SCADA systems. With a configurable baud rate (default 9600 bps) and fixed settings of 8 data bits, 1 stop bit and no parity, the unit simplifies serial configuration and reduces commissioning time. This stability ensures consistent data transfer for production monitoring and traceability. Small footprint, robust connection in controlled workshops Housed in an IP40 enclosure and measuring 53×82×31 mm, the unit is designed for neat mounting near measurement stations where protection from large particles and light contact is sufficient. The compact dimensions and low weight make it easy to integrate into instrument racks or control cabinets without requiring additional space. The modest protection class suits many indoor industrial and laboratory settings while keeping wiring runs short. Clear operating window and environmental limits for dependable operation Rated for operation between 5–40 °C with up to 70% humidity, the interface is intended for typical workshop and laboratory conditions rather than harsh outdoor environments. Specifying these environmental limits helps planners choose appropriate locations and enclosures so the interface maintains reliable communications and long service life. The device is supplied without a measuring instrument and is intended to be paired with Microtech DataMet series equipment. Practical protocol and wiring details explained The RS‑485 output is a four‑wire arrangement (5–24 V, GND, A, B) commonly used for industrial Modbus RTU networks; this ensures galvanic reference and signal integrity across longer cable runs. Explaining the wiring and protocol behaviour reduces installation errors and supports predictable system behaviour during commissioning. The gateway converts USB‑C instrument data to a widely supported field protocol, enabling legacy systems and modern controllers to share measurement values without bespoke drivers. For straightforward Modbus RTU integration with Microtech instruments, contact Metav Werkzeuge for ordering or to request a technical consultation on network wiring and configuration; Metav Werkzeuge provides local support from Emmerich and can advise on matching the gateway to existing control systems. Technical Data Article number: 141077073 Type: Modbus TCP/IP data box Protocol: Modbus RTU Connection: USB‑C (instrument side) / RS‑485 4‑wire (5–24 V, GND, A, B) Delivery: without measuring instrument Facts Working temperature: 5–40 °C Humidity: 70% Protection class: IP40 Dimensions: 53×82×31 mm Weight: 0.15 kg Baud rate: 9600 bps (configurable) Data bits: 8 Stop bits: 1 Parity: None Special features Designed for integration with Microtech DataMet instruments Converts USB‑C output to Modbus RTU over RS‑485 Compact enclosure for instrument racks and control cabinets Configurable serial settings for compatibility with PLCs and SCADA FAQ What does the gateway do in a measurement setup? The Modbus TCP/IP data box converts USB‑C output from a Microtech DataMet instrument into a Modbus RTU stream on RS‑485, allowing PLCs and data loggers to read measurement values directly. Which serial settings are used by default and can they be changed? Default serial settings are 9600 bps, 8 data bits, 1 stop bit, no parity; the baud rate is configurable to match the host system. Is the device suitable for outdoor or wash‑down environments? No; the unit has IP40 protection and is intended for indoor workshop or laboratory use within the stated 5–40 °C and 70% humidity range. Does the product include the measuring instrument or calibration certificate? The delivery is without a measuring instrument; calibration certificates are not included with the data box unless explicitly stated for the paired instrument. What wiring is required to connect to a PLC? A four‑wire RS‑485 connection (5–24 V, GND, A, B) is required; the gateway appears on the Modbus network as a standard RTU device for polling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Optima App For Windows Data Management And Export, USB/Wireless Support - Microtech Metrology
Take advantage of reliable instrument connectivity, automatic synchronisation and multi-format export for consistent measurement workflows. Order the Optima App Microtech for Windows directly via Metav Werkzeuge or ask our consultants if needed. Optima App Microtech for Windows — Instrument connectivity and multi-format data export (Microtech Metrology) The Optima App Microtech for Windows is a Windows application designed to connect Microtech measuring instruments, synchronise readings and export measurement data into production and reporting systems for laboratory and workshop use. Connects up to 8 instruments Exports CSV, XLS and PDF Autoconnection and device filtering Windows 7–11 compatible Seamless integration with production systems The software provides autoconnection and device filtering to keep measurement data flowing into existing workflows with minimal intervention. Compatible with Windows 7–11, the application supports collection from up to 8 instruments and relays results to external programmes such as Excel, SAP and SolidWorks. The configuration for decimal separators and data formatting ensures CSV, XLS and PDF files are immediately usable in reporting systems, reducing manual rework and accelerating traceability. Reliable data capture that reduces process uncertainty Built-in synchronisation routines and instrument zero setting secure repeatable readings across measurement sessions. Features such as DataMet connection modes, Wireless and USB footswitch options and a user manager reduce operator influence and speed cycle times. Functions like Go/NoGo checks, resolution selection and a timer help to embed objective pass/fail logic into routine inspections, improving throughput and minimizing human error on the shop floor. Flexible reporting and visual analysis for clear decisions The application supports multi-format data export and a Graphical mode for immediate visualisation of trends and individual readings. Saving graphs as PNG and exporting datasets in csv, xls, pdf formats allows seamless integration into quality documentation and statistical tools. Adjustable output formats and on-line export options mean measurement results can be routed directly to database systems or CAD‑linked workflows without reformatting, saving administrative time and strengthening audit readiness. Practical operation for workshop and laboratory environments Installation on a standard Windows workstation is straightforward and supports up to two USB dongles for licence or connectivity needs. The app includes multilanguage support (10 languages) and straightforward hardware pairing for Wireless and USB accessories. Optional DataMet buttons and footswitches add hands‑free data capture, making the system suitable for both bench‑top lab use and production‑line measurement points while keeping training needs limited. Contact Metav Werkzeuge for tailored advice on Microtech integration, licence and accessory options and assistance with compatibility checks and setup Technical data Article number: 299100560 Name: Optima App Microtech for Windows Manufacturer: Microtech Metrology Core specifications Max instruments connected: 8 USB-dongles (max qty): 2 Multilanguage: 10 languages Supported Windows versions: 7, 8, 10, 11 Features and interfaces Autoconnection DataMet connection modes / WIRELESS SwissMet Instrument ZERO setting (DataMet) Data reading synchronising User manager WIRELESS footswitch connection USB footswitch connection mm/inch conversion Go/NoGo functions Graphical mode Timer and resolution selection Export to external programmes (Excel, SAP, SolidWorks) Save data to csv, xls, pdf Save graph png Optional DataMet buttons and footswitches FAQ How many instruments can be connected at the same time? The Optima App Microtech for Windows supports connection of up to 8 instruments simultaneously, enabling consolidated data collection from multiple measuring points. Which export formats are available for reports and data exchange? Measurement results can be saved and exported as csv, xls and pdf files, and graphs may be saved as PNG for inclusion in reports or statistical software. Is wireless operation supported and are external switches available? Yes, the application supports Wireless connections and both Wireless and USB footswitches; optional DataMet buttons are also supported for hands‑free capture. Which Windows versions are compatible with the software? The software is compatible with Windows 7, 8, 10 and 11, allowing deployment on common laboratory and workshop PCs. Can data be sent directly to ERP or CAD systems? On-line export to external programmes such as Excel, SAP and SolidWorks is provided; export formats and separators are adjustable to match target systems. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com