CCGT060202-X15 WXM15 Wendeplatten - Walter Tools

Efficient machining of non‑ferrous materials is achieved by the combination of a sharp WXM15 uncoated carbide grade and a Rhombus 80° geometry with a 7° clearance angle; order the insert directly via Metav Werkzeuge or request application advice for optimal process parameters.

CCGT060202-X15 WXM15 — Drilling/Reaming Indexable Insert, Rhombus 80°, Walter Tools

The CCGT060202-X15 WXM15 is a drilling/reaming indexable insert designed for productive machining of non‑ferrous metals within the Walter N‑grade system.

• Uncoated carbide for non‑ferrous metals
• Rhombus 80° geometry, 7° clearance
• 0.2 mm corner radius for fine finishes

Increased productivity for non‑ferrous machining

The combination of the WXM15 uncoated carbide grade and the X15 chipbreaker is engineered to improve cutting stability when machining non‑ferrous metals such as Aluminium, copper and Messing. The sharp, wear‑resistant edge reduces cutting forces and helps prevent material adhesion that can otherwise degrade cycle times. For operations where chip control and uninterrupted throughput matter, this insert supports higher feed rates while maintaining consistent tool life, helping to lower overall process costs and improve production reliability.

Geometry that supports precision and surface quality

The Rhombus 80° plate shape with a 7° clearance angle and a 0.2 mm corner radius delivers a balance between strength and fine finishing. The 80° approach provides axial rigidity in drilling and reaming operations, while the modest corner radius enables a controlled burr formation and improved surface integrity. This geometry is particularly beneficial where component tolerances and repeatable finishes are required, as it reduces vibration and promotes a stable cutting edge throughout the tool life.

System compatibility and reliable handling in workshops

Designed for the Walter N‑Sortensystem, the insert integrates into common indexable toolholders managed in standard production tool chests. The designation CCGT060202‑X15 clarifies the geometry and chipbreaker, while the grade WXM15 indicates an uncoated carbide optimised for N‑materials. Tolerance class G and execution T ensure consistent seating and repeatability between tool changes. For operations that demand swift insert swaps and predictable performance, this configuration supports efficient changeovers and simple inventory management.

Application guidance and process benefits

When used for drilling or reaming tasks in soft and ductile materials, the sharp cutting edge and the X15 chip control reduce the tendency for stringy chips and material build‑up, lowering the risk of surface defects. The technical balance between rake and clearance also minimises heat generation at the cutting zone, which can extend effective edge life even without a coating. For shops aiming to combine cycle time improvement and reproducible component quality, the insert represents a pragmatic choice within standardised tool systems.

For process recommendations, grade selection or stock enquiries for this Walter Tools insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss application parameters and availability.

Technical data

• Article number: CCGT060202-X15-WXM15-WALTER
• Designation without grade: CCGT060202-X15
• ISO designation: CCGT060202-X15 WXM15
• Manufacturer: Walter Tools
• Series: Walter N-Sortensystem
• Grade: WXM15
• Execution: T

Facts

• Clearance angle: 7°
• Corner radius: 0.2 mm
• Plate size: 06
• Plate thickness: 02
• Tolerance class: G

Special features

• Uncoated carbide (WXM15)
• Suitable for non‑ferrous metals (N)
• Rhombus 80° plate shape
• Chipbreaker: X15
• Series: Walter N‑Sortensystem
• SKU: CCGT060202-X15-WXM15-WALTER
• Designation without grade: CCGT060202-X15
• Execution: T

FAQ

Which materials is this insert intended for?
The CCGT060202‑X15 WXM15 insert is intended for non‑ferrous metals (ISO group N), including Aluminium, copper and Messing, where a sharp cutting edge and good chip control are required.

What are the main benefits of the WXM15 grade?
WXM15 is an uncoated carbide grade that offers a sharp cutting edge and reliable wear resistance for N‑materials; the grade on the CCGT060202‑X15 WXM15 insert helps to reduce material adhesion and maintain edge integrity.

How does the Rhombus 80° geometry influence performance?
The Rhombus 80° shape increases axial rigidity and, together with the 7° clearance and 0.2 mm corner radius, helps to deliver stable cutting, reduced vibration and improved surface finish during drilling and reaming.

Is the chipbreaker suitable for stringy chips?
The X15 chipbreaker on this insert supports controlled chip formation in ductile materials, improving evacuation and lowering the risk of chip entanglement in the toolpath.

Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany

The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected brand names and trademarks are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.