CCGT060208FS-1 WDN10 WDN10 Wendeplatten - Walter Tools

Take advantage of the WDN10 PKD grade and the precise rhombic 80° geometry for durable, repeatable performance in non-ferrous and abrasive materials; the defined 0.8 mm corner radius and 7° relief angle ensure controlled chip formation and consistent surface quality. Order procurement or request technical clarification directly via Metav Werkzeuge.

CCGT060208FS-1 WDN10 rhombic 80° PKD turning and boring insert by Walter Tools — 0.8 mm corner radius, 7° relief

The CCGT060208FS-1 WDN10 is a rhombic 80° turning and boring insert with a polykristalliner Diamant (PKD) grade, engineered for high-wear resistance and stable cutting in non-ferrous and abrasive, non-ferrous workpieces

• PKD grade for high wear resistance
• Rhombic 80° geometry for stable cutting
• 0.8 mm corner radius for defined edge
• 7° relief angle for controlled chip flow

Optimised wear resistance for abrasive, non-ferrous materials

The PKD-based WDN10 grade delivers exceptional wear resistance and thermal stability when machining abrasive non-ferrous materials such as aluminium alloys with abrasive fillers and other non-ferrous, hard particles. The use of a polycrystalline diamond cutting layer reduces flank wear and extends effective tool life, which translates into fewer insert changes and more predictable production cycles. The rhombic cutting shape and the insert’s listed grade together support consistent edge integrity, improving surface finish and reducing secondary operations in many high-throughput turning and boring tasks.

Stable cutting geometry that promotes precision and repeatability

A controlled geometry is essential for process stability. The rhombic 80° form combined with a 0.8 mm corner radius and 7° relief angle provides a balance between edge strength and cutting action, enabling steady chip formation with the specified chipbreaker 1. This configuration lowers the risk of interrupted cuts and contributes to repeatable dimensional accuracy in serial production. For shops aiming at reproducible part quality, the defined corner radius helps maintain consistent tool engagement and reduces variation between batches.

Practical application notes and process efficiency

The insert is supplied in a standard size format (06 plate size, thickness 02) with tolerance class G and execution T, matching common toolholder systems for turning and boring. Given the PKD nature of the grade, this insert is particularly suited to abrasive non-ferrous materials rather than hardened steels; suitability for specific materials should be verified against the manufacturer’s product matrix. The clear geometry and robust grade can reduce cycle times by maintaining edge life and lowering the frequency of regrinding or replacement, which supports overall process efficiency and predictable maintenance planning.

For tailored advice on integrating the Walter Tools CCGT060208FS-1 WDN10 insert into existing production chains or to arrange procurement through Metav Werkzeuge, contact Metav Werkzeuge for expert support and fast processing

Technical data

• SKU: CCGT060208FS-1-WDN10-WALTER
• Designation: CCGT060208FS-1 WDN10
• Manufacturer: Walter Tools
• Product type: Turning and boring insert
• Series: Walter Schneidstoffsorte - Serie offen
• Execution: T

Core technical values

• Relief angle: 7°
• Corner radius: 0.8 mm
• Plate form: Rhombus 80°
• Plate size: 06
• Plate thickness: 02
• Chipbreaker: 1
• Tolerance class: G

Materials & special features

• Coating / grade: PKD (polykristalliner Diamant) — WDN10
• Intended application: Non-ferrous and abrasive, non-ferrous materials (verify per product matrix)
• Strip: Walter Schneidstoffsorte - Serie offen
• WPL sort: WDN10
• Execution note: Katalogabhängig material specification

FAQ

What materials is this insert intended for? The CCGT060208FS-1 WDN10 insert uses a PKD grade and is intended primarily for non-ferrous and abrasive, non-ferrous materials; material suitability should be checked against the product matrix.

How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength and supports consistent surface finish while helping to control chip formation with the specified chipbreaker geometry.

Can this insert be used for steel machining? PKD grades such as WDN10 are optimised for non-ferrous and abrasive materials; they are generally not recommended for conventional steel machining—consult the product matrix for exceptions.

Geschützte Marken und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.

Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen