CCGT09T308M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools

The combination of a WEP10C cermet grade and an FP2 chipbreaker delivers consistent edge life and superior surface quality for finishing operations; the robust rhombic 80° geometry adds versatility to turning applications. Order the CCGT09T308M-FP2 WEP10C directly via Metav Werkzeuge or ask our consultants if additional selection support is required.

CCGT09T308M-FP2 WEP10C – Rhombic 80° cermet turning insert by Walter Tools (FP2 chipbreaker, 0.8 mm nose radius)

The CCGT09T308M-FP2 WEP10C is a rhombic 80° turning insert designed for precision finishing and light-roughing tasks in modern production environments.

• Cermet grade WEP10C for excellent surface finish
• FP2 chipbreaker for stable, predictable chips
• Rhombic 80° geometry for universal turning applications
• 0.8 mm corner radius with 7° relief for fine finishes

Achieve consistent, high-quality surface finishes with cermet technology

The Walter Cermet grade WEP10C combines a hard ceramic-like matrix with metallic binders to deliver a cutting edge that resists wear while producing a refined workpiece surface. Because cermet grades reduce built-up edge and maintain geometry under finishing conditions, the result is a consistent surface finish and extended part-to-part repeatability. For operations where a superior finish and tight dimensional control matter, the material properties of this insert reduce the need for secondary polishing and minimise rejects.

Stable chip control reduces downtime and improves process reliability

Equipped with the FP2 chipbreaker, this insert promotes controlled chip formation across a range of feeds appropriate for finishing and light machining. Predictable chips mean fewer interruptions from tangled swarf and reduced risk to the toolholder, which in turn supports higher effective spindle time and improved process security. The chipbreaker is engineered to assist in evacuating chips safely at typical finishing parameters, making the tool a suitable choice for manufacturers seeking reliable cycle times and less manual intervention.

Geometry and edge design balance strength and accessibility

The rhombic 80° geometry offers a compromise between accessibility and edge strength, enabling profile-following and general turning tasks with a single insert family. The 0.8 mm corner radius combined with a 7° relief angle supports fine surface generation while retaining an edge capable of short, interrupted cuts. The nominal plate thickness T3 adds rigidity in the pocket, helping to maintain dimensional stability during light-roughing transitions. Together, these design elements deliver a versatile insert that can be used for finishing passes where both accuracy and surface integrity are required.

Practical selection and integration into production cells

Tolerance class G and the Walter Cermet series designation indicate a manufacturing standard aligned with industrial needs; for precise process planning, check the product matrix to verify workpiece compatibility and recommended cutting data. The insert is supplied in the CCGT09T308M-FP2 geometry and is compatible with standard tooling systems that accept rhombic 80° turning inserts of size 09. For best results, pair with appropriate toolholders and adhere to recommended feeds and speeds for cermet grades to unlock the full potential of the grade in finishing tasks.

For precise finishing tasks with Walter Tools' WEP10C cermet grade, contact Metav Werkzeuge for tailored recommendations and to confirm suitability for specific materials; eMail: info@metav-werkzeuge.com or call +49 2822 7131930.

Technical data

• Article number: CCGT09T308M-FP2-WEP10C-WALTER
• Designation: CCGT09T308M-FP2 WEP10C
• Series: Walter Cermet
• Manufacturer: Walter Tools

Facts

• Relief angle: 7°
• Corner radius: 0.8 mm
• Insert size: 09
• Plate thickness: T3
• Tolerance class: G
• Geometry: Rhombic 80°
• Chipbreaker: FP2

Features

• Material: catalogue dependent
• Grade: WEP10C (cermet)
• Execution: T
• Plate form: Rhombus 80°
• Series information: Walter Cermet
• Note: Verify workpiece suitability in the product matrix

FAQ

What materials is this insert suited to machine?
The CCGT09T308M-FP2 WEP10C is a cermet-grade insert; material suitability should be checked against the Walter Cermet product matrix to confirm recommendations for specific alloys and hardness levels.

How does the FP2 chipbreaker affect machining?
The FP2 chipbreaker on the insert promotes controlled chip formation and evacuation, reducing the risk of chip-related interruptions and supporting consistent finishing results with the Walter Tools insert.

Is this insert suitable for finishing operations?
Yes, the geometry and the WEP10C cermet grade are optimised for finishing and light-roughing, offering a balance of edge life and surface quality for demanding finish passes.

What does the rhombic 80° geometry provide in practice?
The rhombic 80° shape enables access to a variety of turning positions while maintaining sufficient edge strength for short interruptions, making it a versatile option within the Walter Cermet series.

Where can one obtain cutting data or application advice for this insert?
For cutting data and specific application advice for the CCGT09T308M-FP2 WEP10C, consult Metav Werkzeuge or refer to the Walter Cermet documentation and product matrix for recommended parameters.

Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen

Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.