CCMT060204-FP4 WPP20G FP4 Wendeplatten - Walter Tools

Take advantage of a durable, coated-carbide grade and precise geometry to maintain consistent chip formation and repeatable turning results. The combination of the Tiger‑tec Gold coating with the FP4 chipbreaker and a 0.4 mm corner radius supports steady tool life and reliable finishing in steel machining; order directly via Metav Werkzeuge or consult the team for application-specific advice.

CCMT060204-FP4 WPP20G — Rhombic 80° turning insert, Tiger‑tec Gold, Walter Tools

The CCMT060204-FP4 WPP20G is a rhombic, indexable turning and boring insert designed for reliable steel machining with a coated-carbide grade and an integrated FP4 chipbreaker for controlled swarf evacuation.

• Tiger‑tec Gold coated carbide
• 0.4 mm corner radius for precision
• 7° clearance angle for stable cutting

Durable coating that supports higher productivity

The insert’s Tiger‑tec Gold coating is a multilayer, wear-resistant finish applied to a coated carbide substrate; this combination was developed to extend tool life under the thermal and mechanical loads typical of steel turning. As a result, the grade offers stable chip formation and consistently long cutting edge life, which reduces unplanned tool changes and helps to keep machining processes predictable. The benefit is fewer interruptions and a more efficient production rhythm.

Geometry engineered for consistent chip control and surface quality

With a rhombic 80° shape and an integrated FP4 chipbreaker, the geometry of the insert promotes reliable swarf control and even flank contact. The 0.4 mm corner radius supports fine surface finishes while maintaining strength at the cutting edge; the 7° clearance angle reduces rubbing on the flank face and helps prevent built-up edge when machining steels. Together these features enable reproducible part quality and fewer reworks on turned components.

Optimised for steel applications according to ISO P

The grade and geometry are specified for steel machining (ISO P), where heat generation and chip form require robust solutions. The WPP20G grade is a versatile choice within the Tiger‑tec Gold family: engineered to balance wear resistance and toughness so that both finishing and medium-duty roughing operations can be performed without frequent insert changes. This makes it suitable for job shops and production environments where a single insert must handle a range of steel alloys.

Practical characteristics and workshop handling

The insert is supplied in the CCMT060204-FP4 format with a plate thickness of 02, size 06 and tolerance class M, making it compatible with standard indexable toolholders that accept rhombic 80° inserts. The FP4 chipbreaker is designed to manage continuous and segmented chips typically encountered with steels; this reduces the risk of chip entanglement and simplifies post-process handling. For routine use, the stable edge and coating minimise inspection frequency and support predictable tool-change intervals.

Contact Metav Werkzeuge for specific cutting-data recommendations, application matching or to request a tailored quotation referencing SKU CCMT060204-FP4-WPP20G-WALTER

Technical data

• Article number: CCMT060204-FP4-WPP20G-WALTER
• Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte
• Manufacturer: Walter Tools
• Series: Tiger‑tec Gold
• ISO designation: CCMT060204-FP4 WPP20G

Facts

• Clearance angle: 7°
• Corner radius: 0.4 mm
• Insert size: 06
• Thickness: 02
• Tolerance class: M

Special features

• Chipbreaker: FP4
• Grade: WPP20G
• Coating: Tiger‑tec Gold
• Substrate: coated carbide
• Application: steel (ISO P)
• Plate form: Rhombus 80°
• Execution: T

FAQ

What materials is this insert suitable for?
The CCMT060204-FP4 WPP20G insert by Walter Tools is specified for steel machining (ISO P) and the WPP20G grade is tuned for the thermal and chip-formation characteristics of steels.

How does the FP4 chipbreaker affect machining?
The FP4 chipbreaker on this insert improves chip control and encourages short, manageable chip shapes in steel turning, which supports safer, cleaner operation and consistent surface quality with the CCMT060204-FP4 WPP20G.

Can this insert be used for finishing operations?
Yes; the 0.4 mm corner radius and the coated-carbide grade provide a balance between edge strength and surface finish, making the insert suitable for finishing and medium-duty turning tasks.

What are the key dimensions to check when selecting a toolholder?
Verify that the toolholder accepts a rhombic 80° insert in size 06 with thickness 02 and tolerance class M to ensure correct seating and secure clamping of the CCMT060204-FP4 WPP20G.

Where to reference the product when ordering or requesting data?
Use the SKU CCMT060204-FP4-WPP20G-WALTER and the ISO designation CCMT060204-FP4 WPP20G when enquiring about tooling, spare inserts or cutting-data support from Metav Werkzeuge.

Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.

Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen