CCMT09T308-FW4 WKP01G WKP01G Wendeplatten - Walter Tools

Take advantage of the combination of Tiger·tec Gold wear resistance, the FW4 chipbreaker for reliable chip control and compatibility with steel and cast iron to maintain productive turning cycles; order via Metav Werkzeuge or consult the specialists for application advice.

CCMT09T308-FW4 WKP01G indexable turning insert – Rhombic 80°, 0.8 mm nose radius | Walter Tools

The CCMT09T308-FW4 WKP01G is an indexable turning insert crafted for general turning operations on steel and cast iron, offering a balance of wear resistance and consistent chip control.

• Tiger·tec Gold coating for enhanced wear resistance
• Coated carbide grade WKP01G for steel and cast iron
• Rhombic 80° form with 0.8 mm nose radius
• FW4 chipbreaker for stable chip control

High productivity through coated-grade performance

The combination of the WKP01G coated carbide grade and the Tiger·tec Gold coating is engineered to extend tool life under typical turning loads. This insert reduces unplanned tool changes by improving edge stability and abrasion resistance during continuous operation on steel and cast iron, which means fewer stoppages and a steadier production output. The result is measurable efficiency: longer tool life and more predictable change intervals contribute to a lower effective cost per part without sacrificing surface quality.

Reliable chip control and geometry that aids process stability

The FW4 chipbreaker is designed to form controllable chips in a wide range of turning passes, lowering the risk of entanglement in both roughing and light finishing cuts. The Rhombic 80° geometry, combined with a 0.8 mm nose radius, provides a favourable balance between cutting edge strength and surface finish capability. Together, these features support stable cutting forces and consistent part tolerances, particularly in serial production contexts where repeatability is essential.

Practical application guidance and machining scope

This insert is specified for materials classified under ISO groups P (steel) and K (cast iron), making it suitable for unalloyed and alloyed steels as well as abrasive cast materials where controlled chip breakage is needed. The 7° relief angle supports positive cutting engagement, while the tolerance class M ensures consistent dimensional quality across batches. For best results, pair the insert with suitable holder geometry and set cutting parameters according to workpiece machinability; specialist advice is available from Metav Werkzeuge for optimising parameters for specific machines and workpiece materials.

For tailored machining recommendations for this Walter Tools insert or to confirm stock availability, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930—our team will advise on the ideal grade and cutting data for the intended application.

Technical data

• Article number: CCMT09T308-FW4-WKP01G-WALTER
• Designation: CCMT09T308-FW4 WKP01G
• Type: Indexable turning insert
• Series: Tiger·tec Gold
• Manufacturer: Walter Tools

Facts

• Corner radius: 0.8 mm
• Relief angle: 7°
• Insert form: Rhombic 80°
• Insert size: 09
• Thickness: T3
• Tolerance class: M

Special features

• Grade WKP01G – coated carbide
• Chipbreaker: FW4
• Material suitability: Steel (P) and Cast iron (K)
• Coating: Tiger·tec Gold

FAQ

Which materials can be machined with this insert?
The CCMT09T308-FW4 WKP01G is specified for ISO groups P and K, meaning it is suitable for a range of steel grades and cast iron applications.

What benefit does the Tiger·tec Gold coating provide?
The Tiger·tec Gold coating on the WKP01G grade improves wear resistance and edge life, contributing to longer service intervals and more stable machining on abrasive materials.

Is the FW4 chipbreaker suitable for finishing passes?
The FW4 chipbreaker offers stable chip formation across roughing and light finishing; for high-finishing demands, verify required surface finish and adjust feed and depth of cut accordingly.

Does this insert suit stainless steel machining?
Stainless steel is not listed among the specified ISO material groups for this grade; the CCMT09T308-FW4 WKP01G is optimised for steel and cast iron, so alternative grades should be considered for sustained stainless steel machining.

Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com

Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.